If a provider gets unloaded then any thread stop handlers that it had
registered will be left hanging. We should clean them up before tearing
down the provider.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9186)
We're going to need some of these functions in the FIPS module, but most
of the rest of the code in init.c is not needed. Therefore we split it out.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9040)
In later commits this will allow providers to subscribe to thread stop
events. We will need this in the FIPS module. We also make thread stop
handling OPENSSL_CTX aware (different OPENSSL_CTXs may have different
thread local data that needs cleaning up).
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9040)
It was previously rand_lib but it makes more sense in drbg_lib.c since
all the functions that use this lock are only ever called from drbg_lib.c
We add some FIPS_MODE defines in preparation for later moving this code
into the FIPS module.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9039)
In preparation for moving the RAND code into the FIPS module we make
drbg_lib.c OPENSSL_CTX aware.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9039)
We should be seeking to move the OPENSSL_init_crypto and OPENSSL_cleanup
processing into OPENSSL_CTX instead.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8857)
Various core and property related code files used global data. We should
store all of that in an OPENSSL_CTX instead.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8857)
It was assumed that the config functionality returned a boolean.
However, it may return a negative number on error, so we need to take
that into account.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8679)
'no-dso' is meaningless, as it doesn't get any macro defined.
Therefore, we remove all checks of OPENSSL_NO_DSO. However, there may
be some odd platforms with no DSO scheme. For those, we generate the
internal macro DSO_NONE aand use it.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/#8622)
Revert win32_pathbyaddr() which is used in DSO_dsobyaddr().
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8596)
The "hw" and "hw-.*" style options are historical artifacts, sprung
from the time when ENGINE was first designed, with hardware crypto
accelerators and HSMs in mind.
Today, these options have largely lost their value, replaced by
options such as "no-{foo}eng" and "no-engine".
This completes the transition by making "hw" and "hw-.*" deprecated,
but automatically translated into more modern variants of the same.
In the process, we get rid of the last regular expression in
Configure's @disablables, a feature that was ill supported anyway.
Also, padlock now gets treated just as every other engine.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8380)
Engine has been moved from crypto/engine/eng_devcrypto.c to
engines/e_devcrypto.c.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7859)
1. In addition to overriding the default application name,
one can now also override the configuration file name
and flags passed to CONF_modules_load_file().
2. By default we still keep going when configuration file
processing fails. But, applications that want to be strict
about initialization errors can now make explicit flag
choices via non-null OPENSSL_INIT_SETTINGS that omit the
CONF_MFLAGS_IGNORE_RETURN_CODES flag (which had so far been
both undocumented and unused).
3. In OPENSSL_init_ssl() do not request OPENSSL_INIT_LOAD_CONFIG
if the options already include OPENSSL_INIT_NO_LOAD_CONFIG.
4. Don't set up atexit() handlers when called with INIT_BASE_ONLY.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7986)
This enables cleanup to happen on DLL unload instead of at process exit.
[extended tests]
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7647)
We have a number of instances where there are multiple "init" functions for
a single CRYPTO_ONCE variable, e.g. to load config automatically or to not
load config automatically. Unfortunately the RUN_ONCE mechanism was not
correctly giving the right return value where an alternative init function
was being used.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7647)
It was assumed that CRYPTO_THREAD_LOCAL is universally scalar type,
which doesn't appear to hold true.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6976)
Problem was that Windows threads that were terminating before libcrypto
was initialized were referencing uninitialized or possibly even
unrelated thread local storage index.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6752)
Although it deviates from the actual prototype of DSO_dsobyaddr(), this
is now ISO C compliant and gcc -Wpedantic accepts the code.
Added DATA segment checking to catch ptrgl virtual addresses. Avoid
memleaks with every AIX/dladdr() call. Removed debug-fprintf()s.
Added test case for DSO_dsobyaddr(), which will eventually call dladdr().
Removed unecessary AIX ifdefs again.
The implementation can only lookup function symbols, no data symbols.
Added PIC-flag to aix*-cc build targets.
As AIX is missing a dladdr() implementation it is currently uncertain our
exit()-handlers can still be called when the application exits. After
dlclose() the whole library might have been unloaded already.
Signed-off-by: Matthias Kraft <makr@gmx.eu>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5668)
This avoids lock contention.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5547)
If the global DRBGs are allocated on the secure heap, then calling
CRYPTO_secure_malloc_done() inside main() will have no effect, unless
OPENSSL_cleanup() has been called explicitely before that, because
otherwise the DRBGs will still be allocated. So it is better to cleanup
the secure heap automatically at the end of OPENSSL_cleanup().
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5294)
The behavior of resetting the init_lock value to NULL after
freeing it during OPENSSL_cleanup() was added as part of the
global lock commits that were just reverted, but there is desire
to retain this behavior for clarity.
It is unclear that the library would actually remain usable in
any form after OPENSSL_cleanup(), since the required re-initialization
occurs under a CRYPTO_ONCE check that cannot be reset at cleanup time.
That said, a NULL dereference is probably more friendly behavior
in these treacherous waters than using freed memory would be.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5089)
Conceptually, this is a squashed version of:
Revert "Address feedback"
This reverts commit 75551e07bd.
and
Revert "Add CRYPTO_thread_glock_new"
This reverts commit ed6b2c7938.
But there were some intervening commits that made neither revert apply
cleanly, so instead do it all as one shot.
The crypto global locks were an attempt to cope with the awkward
POSIX semantics for pthread_atfork(); its documentation (the "RATIONALE"
section) indicates that the expected usage is to have the prefork handler
lock all "global" locks, and the parent and child handlers release those
locks, to ensure that forking happens with a consistent (lock) state.
However, the set of functions available in the child process is limited
to async-signal-safe functions, and pthread_mutex_unlock() is not on
the list of async-signal-safe functions! The only synchronization
primitives that are async-signal-safe are the semaphore primitives,
which are not really appropriate for general-purpose usage.
However, the state consistency problem that the global locks were
attempting to solve is not actually a serious problem, particularly for
OpenSSL. That is, we can consider four cases of forking application
that might use OpenSSL:
(1) Single-threaded, does not call into OpenSSL in the child (e.g.,
the child calls exec() immediately)
For this class of process, no locking is needed at all, since there is
only ever a single thread of execution and the only reentrancy is due to
signal handlers (which are themselves limited to async-signal-safe
operation and should not be doing much work at all).
(2) Single-threaded, calls into OpenSSL after fork()
The application must ensure that it does not fork() with an unexpected
lock held (that is, one that would get unlocked in the parent but
accidentally remain locked in the child and cause deadlock). Since
OpenSSL does not expose any of its internal locks to the application
and the application is single-threaded, the OpenSSL internal locks
will be unlocked for the fork(), and the state will be consistent.
(OpenSSL will need to reseed its PRNG in the child, but that is
an orthogonal issue.) If the application makes use of locks from
libcrypto, proper handling for those locks is the responsibility of
the application, as for any other locking primitive that is available
for application programming.
(3) Multi-threaded, does not call into OpenSSL after fork()
As for (1), the OpenSSL state is only relevant in the parent, so
no particular fork()-related handling is needed. The internal locks
are relevant, but there is no interaction with the child to consider.
(4) Multi-threaded, calls into OpenSSL after fork()
This is the case where the pthread_atfork() hooks to ensure that all
global locks are in a known state across fork() would come into play,
per the above discussion. However, these "calls into OpenSSL after
fork()" are still subject to the restriction to async-signal-safe
functions. Since OpenSSL uses all sorts of locking and libc functions
that are not on the list of safe functions (e.g., malloc()), this
case is not currently usable and is unlikely to ever be usable,
independently of the locking situation. So, there is no need to
go through contortions to attempt to support this case in the one small
area of locking interaction with fork().
In light of the above analysis (thanks @davidben and @achernya), go
back to the simpler implementation that does not need to distinguish
"library-global" locks or to have complicated atfork handling for locks.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5089)
Reseeding is handled very differently by the classic RAND_METHOD API
and the new RAND_DRBG api. These differences led to some problems when
the new RAND_DRBG was made the default OpenSSL RNG. In particular,
RAND_add() did not work as expected anymore. These issues are discussed
on the thread '[openssl-dev] Plea for a new public OpenSSL RNG API'
and in Pull Request #4328. This commit fixes the mentioned issues,
introducing the following changes:
- Replace the fixed size RAND_BYTES_BUFFER by a new RAND_POOL API which
facilitates collecting entropy by the get_entropy() callback.
- Don't use RAND_poll()/RAND_add() for collecting entropy from the
get_entropy() callback anymore. Instead, replace RAND_poll() by
RAND_POOL_acquire_entropy().
- Add a new function rand_drbg_restart() which tries to get the DRBG
in an instantiated state by all means, regardless of the current
state (uninstantiated, error, ...) the DRBG is in. If the caller
provides entropy or additional input, it will be used for reseeding.
- Restore the original documented behaviour of RAND_add() and RAND_poll()
(namely to reseed the DRBG immediately) by a new implementation based
on rand_drbg_restart().
- Add automatic error recovery from temporary failures of the entropy
source to RAND_DRBG_generate() using the rand_drbg_restart() function.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4328)
cryptilib.h is the second.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4188)
Removed e_os.h from all bar three headers (apps/apps.h crypto/bio/bio_lcl.h and
ssl/ssl_locl.h).
Added e_os.h into the files that need it now.
Directly reference internal/nelem.h when required.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4188)
The one creating the DRBG should instantiate it, it's there that we
know which parameters we should use to instantiate it.
This splits the rand init in two parts to avoid a deadlock
because when the global drbg is created it wands to call
rand_add on the global rand method.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
GH: #4268
Use atfork to count child forks, and reseed DRBG when the counts don't
match.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4101)
This STORE module adds the following functionality:
- A function OSSL_STORE_open(), OSSL_STORE_load() and OSSL_STORE_close()
that accesses a URI and helps loading the supported objects (PKEYs,
CERTs and CRLs for the moment) from it.
- An opaque type OSSL_STORE_INFO that holds information on each loaded
object.
- A few functions to retrieve desired data from a OSSL_STORE_INFO
reference.
- Functions to register and unregister loaders for different URI
schemes. This enables dynamic addition of loaders from applications
or from engines.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3542)
