Reorder arguments to follow convention.
Also allow r/s to be NULL in DSA_SIG_get0, similarly to ECDSA_SIG_get0.
This complements GH1193 which adds non-const setters.
Reviewed-by: Rich Salz <rsalz@openssl.org>
SSH2 implementations which use DSA_do_verify() and ECDSA_do_verify() are given
the R and S values, and the data to be signed, by the client. Thus in order
to validate these signatures, SSH2 implementations will digest and sign
the data -- and then pass in properly provisioned DSA_SIG and ECDSA_SIG objects.
Unfortunately, the existing OpenSSL-1.1.0 APIs do not allow for directly setting
those R and S values in these objects, which makes using OpenSSL for such
SSH2 implementations much more difficult.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1193)
We already test in EC_POINT_oct2point that points are on the curve. To
be on the safe side, move this check to
EC_POINT_set_affine_coordinates_* so as to also check point coordinates
received through some other method.
We do not check projective coordinates, though, as
- it's unlikely that applications would be receiving this primarily
internal representation from untrusted sources, and
- it's possible that the projective setters are used in a setting where
performance matters.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The ec_wNAF_mul() function allocates some temporary storage that it
doesn't always free on an error condition.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Don't copy parameters is they're already present in the destination.
Return error if an attempt is made to copy different parameters to
destination. Update documentation.
If key type is not initialised return missing parameters
RT#4149
Reviewed-by: Richard Levitte <levitte@openssl.org>
- Missing checks for allocation failure.
- releasing memory in few missing error paths
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
This demystifies two for-loops that do nothing. They were used to write
the ladder in a unified way. Now that the ladder is otherwise commented,
remove the dead loops.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
We should only copy parameters and keys if the group is set. Otherwise
they don't really make any sense. Previously we copied the private key
regardless of whether the group was set...but if it wasn't a NULL ptr
deref could occur. It's unclear whether we could ever get into that
situation, but since we were already checking it for the public key we
should be consistent.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Fix a bug introduced by 6903e2e7e9 (Extended EC_METHOD customisation
support., 2016-02-01). key->meth->set_private() is wrongly called where
it should call key->group->meth->set_private().
PR#4517
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
The Unix build was the last to retain the classic build scheme. The
new unified scheme has matured enough, even though some details may
need polishing.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The private key is a scalar and should be sized by the order, not the
degree. See RFC 5915.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Don't have #error statements in header files, but instead wrap
the contents of that file in #ifndef OPENSSL_NO_xxx
This means it is now always safe to include the header file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The reason to do so is that some of the generators detect PIC flags
like -fPIC and -KPIC, and those are normally delivered in LD_CFLAGS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Some of these scripts would recognise an output parameter if it looks
like a file path. That works both in both the classic and new build
schemes. Some fo these scripts would only recognise it if it's a
basename (i.e. no directory component). Those need to be corrected,
as the output parameter in the new build scheme is more likely to
contain a directory component than not.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Before the 'Introduce the "pic" / "no-pic" config option' commit, the
shared_cflag value for the chosen config would be part of the make
variable CFLAG, which got replicated into CFLAGS and ASFLAGS.
Since said commit, the shared_cflag value has become a make variable
of its own, SHARED_CFLAG (which is left empty in a "no-pic" build).
However, ASFLAGS was forgotten. That's what's corrected with this
change.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This gets rid of the BEGINRAW..ENDRAW sections in crypto/ec/build.info.
This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Make all scripts produce .S, make interpretation of $(CFLAGS)
pre-processor's responsibility, start accepting $(PERLASM_SCHEME).
[$(PERLASM_SCHEME) is redundant in this case, because there are
no deviataions between Solaris and Linux assemblers. This is
purely to unify .pl->.S handling across all targets.]
Reviewed-by: Richard Levitte <levitte@openssl.org>
Appease the sanitizer: avoid left shifts of negative values.
This could've been done entirely with casts to uint and back,
but using masks seemed slightly more readable.
There are also implementation-defined signed right shifts in this
code. Those remain.
Reviewed-by: Rich Salz <rsalz@openssl.org>
- Remove OPENSSL_X25519_X86_64 which never worked, because we don't have
the assembly.
- Also remove OPENSSL_SMALL (which should have been
OPENSSL_SMALL_FOOTPRINT) which isn't a priority at the moment.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Handle KDF in ECDH_compute_key instead of requiring each implementation
support it. This modifies the compute_key method: now it allocates and
populates a buffer containing the shared secret.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Instead of overriding a default operation move default operation to a
separate function which is then explicitly included in any EC_METHOD
that uses it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add X25519 to TLS supported curve list.
Reject attempts to configure keys which cannot be used
for signing.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Add a flag to EC_METHOD for curves which do not support signing.
New function EC_KEY_can_sign() returns 1 is key can be used for signing.
Return an explicit error is an attempt is made to sign with
no signing curves.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
In some cases the EC_POINT and EC_KEY BIGNUM components are suboptimal
or inappropriate. Add an "custom_data" field which curves can populate with
a custom structure to suit their needs.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Extract compression form in EC_KEY_oct2key() instead of manually in the
ASN.1 code. For custom curves do not assume the initial octet is the
compression form: it isn't for X25519 et al.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Add support for optional overrides of various private key operations
in EC_METHOD.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
In EC_KEY_priv2buf(), check for pbuf sanity.
If invoked with NULL, gracefully returns the key length.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Simplifies calling code. Also fixed up any !ptr tests that were
nearby, turning them into NULL tests.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This takes us away from the idea that we know exactly how our static
libraries are going to get used. Instead, we make them available to
build shareable things with, be it other shared libraries or DSOs.
On the other hand, we also have greater control of when the shared
library cflags. They will never be used with object files meant got
binaries, such as apps/openssl or test/test*.
With unified, we take this a bit further and prepare for having to
deal with extra cflags specifically to be used with DSOs (dynamic
engines), libraries and binaries (applications).
Reviewed-by: Rich Salz <rsalz@openssl.org>
All those flags existed because we had all the dependencies versioned
in the repository, and wanted to have it be consistent, no matter what
the local configuration was. Now that the dependencies are gone from
the versioned Makefile.ins, it makes much more sense to use the exact
same flags as when compiling the object files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
It seems that on some platforms, the perlasm scripts call the C
compiler for certain checks. These scripts need the environment
variable CC to have the C compiler command.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add new function EC_KEY_priv2buf() to allocated and encode private
key octet in one call. Update and simplify ASN.1 and print routines.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
New functions EC_KEY_oct2priv and EC_KEY_priv2oct. These are private key
equivalents of EC_POINT_oct2point and EC_POINT_point2oct which convert
between the private key octet format and EC_KEY.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Those even order that do not play nicely with Montgomery arithmetic
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Now that we have the foundation for the "unified" build scheme in
place, we add build.info files. They have been generated from the
Makefiles in the same directories. Things that are platform specific
will appear in later commits.
Reviewed-by: Andy Polyakov <appro@openssl.org>
d2i_ECPrivateKey always caculates the public key so there is
no need to caculate it again in eckey_priv_decode().
Reviewed-by: Rich Salz <rsalz@openssl.org>
New functions to return internal pointer for order and cofactor. This
avoids the need to allocate a new BIGNUM which to copy the value to.
Simplify code to use new functions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There was an unused macro in ssl_locl.h that used an internal
type, so I removed it.
Move bio_st from bio.h to ossl_type.h
Reviewed-by: Andy Polyakov <appro@openssl.org>
During precomputation if the group given is well known then we memcpy a
well known precomputation. However we go the wrong label in the code and
don't store the data properly. Consequently if we call have_precompute_mult
the data isn't there and we return 0.
RT#3600
Reviewed-by: Richard Levitte <levitte@openssl.org>
