Because different platforms have different levels of support for IPv6,
different kinds of sockaddr variants, and some have getaddrinfo et al
while others don't, we could end up with a mess if ifdefs, duplicate
code and other maintainance nightmares.
Instead, we're introducing wrappers around the common form for socket
communication:
BIO_ADDR, closely related to struct sockaddr and some of its variants.
BIO_ADDRINFO, closely related to struct addrinfo.
With that comes support routines, both convenient creators and
accessors, plus a few utility functions:
BIO_parse_hostserv, takes a string of the form host:service and
splits it into host and service. It checks for * in both parts, and
converts any [ipv6-address] syntax to ust the IPv6 address.
BIO_lookup, looks up information on a host.
All routines handle IPv4 (AF_INET) and IPv6 (AF_INET6) addresses, and
there is support for local sockets (AF_UNIX) as well.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Add new function BN_bn2binpad() which checks the length of the output
buffer and pads the result with zeroes if necessary.
New functions BN_bn2lebinpad() and BN_lebin2bn() which use little endian
format.
Reviewed-by: Rich Salz <rsalz@openssl.org>
PACKET contents should be read-only. To achieve this, also
- constify two user callbacks
- constify BUF_reverse.
Reviewed-by: Rich Salz <rsalz@openssl.org>
When auxiliary data contains only reject entries, continue to trust
self-signed objects just as when no auxiliary data is present.
This makes it possible to reject specific uses without changing
what's accepted (and thus overring the underlying EKU).
Added new supported certs and doubled test count from 38 to 76.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
This includes basic constraints, key usages, issuer EKUs and auxiliary
trust OIDs (given a trust suitably related to the intended purpose).
Added tests and updated documentation.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
New functions to return internal pointer for order and cofactor. This
avoids the need to allocate a new BIGNUM which to copy the value to.
Simplify code to use new functions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There was an unused macro in ssl_locl.h that used an internal
type, so I removed it.
Move bio_st from bio.h to ossl_type.h
Reviewed-by: Andy Polyakov <appro@openssl.org>
By default X509_check_trust() trusts self-signed certificates from
the trust store that have no explicit local trust/reject oids
encapsulated as a "TRUSTED CERTIFICATE" object. (See the -addtrust
and -trustout options of x509(1)).
This commit adds a flag that makes it possible to distinguish between
that implicit trust, and explicit auxiliary settings.
With flags |= X509_TRUST_NO_SS_COMPAT, a certificate is only trusted
via explicit trust settings.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
A new return value for DH_check_pub_key was recently added:
DH_CHECK_PUBKEY_INVALID. As this is a flag which can be ORed with other
return values it should have been set to the value 4 not 3.
RT#4278
Reviewed-by: Andy Polyakov <appro@openssl.org>
Historically OpenSSL only ever generated DH parameters based on "safe"
primes. More recently (in version 1.0.2) support was provided for
generating X9.42 style parameter files such as those required for RFC
5114 support. The primes used in such files may not be "safe". Where an
application is using DH configured with parameters based on primes that
are not "safe" then an attacker could use this fact to find a peer's
private DH exponent. This attack requires that the attacker complete
multiple handshakes in which the peer uses the same DH exponent.
A simple mitigation is to ensure that y^q (mod p) == 1
CVE-2016-0701
Issue reported by Antonio Sanso.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Many options for supporting optimizations for legacy crypto on legacy
platforms have been removed. This simplifies the source code and
does not really penalize anyone.
DES_PTR (always on)
DES_RISC1, DES_RISC2 (always off)
DES_INT (always 'unsigned int')
DES_UNROLL (always on)
BF_PTR (always on) BF_PTR2 (removed)
MD2_CHAR, MD2_LONG (always 'unsigned char')
IDEA_SHORT, IDEA_LONG (always 'unsigned int')
RC2_SHORT, RC2_LONG (always 'unsigned int')
RC4_LONG (only int and char (for assembler) are supported)
RC4_CHUNK (always long), RC_CHUNK_LL (removed)
RC4_INDEX (always on)
And also make D_ENCRYPT macro more clear (@appro)
This is done in consultation with Andy.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.
And then some hand-editing of other files.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The SSL and SSL_CTX structures are reference counted. However since libssl
was made opaque there is no way for users of the library to manipulate the
reference counts. This adds functions to enable that.
Reviewed-by: Stephen Henson <steve@openssl.org>
Now that we're using templates, we should warn people not to edit the
resulting file. We do it through util/dofile.pl, which is enhanced
with an option to tell what file it was called from. We also change
the calls so the template files are on the command line instead of
being redirected through standard input. That way, we can display
something like this (example taken from include/openssl/opensslconf.h):
/* WARNING: do not edit! */
/* Generated by Configure from include/openssl/opensslconf.h.in */
Reviewed-by: Rich Salz <rsalz@openssl.org>
Move opensslconf.h.in to include/openssl.
Split off DES,BN,RC4 stuff into separate header file
templates in crypto/include/internal/*_conf.h.in
Reviewed-by: Richard Levitte <levitte@openssl.org>
This is an internal facility, never documented, not for
public consumption. Move it into ssl (where it's only used
for DTLS).
I also made the typedef's for pqueue and pitem follow our style: they
name structures, not pointers.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Calling SSL_shutdown while in init previously gave a "1" response, meaning
everything was successfully closed down (even though it wasn't). Better is
to send our close_notify, but fail when trying to receive one.
The problem with doing a shutdown while in the middle of a handshake is
that once our close_notify is sent we shouldn't really do anything else
(including process handshake/CCS messages) until we've received a
close_notify back from the peer. However the peer might send a CCS before
acting on our close_notify - so we won't be able to read it because we're
not acting on CCS messages!
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The GOST engine is now out of date and is removed by this commit. An up
to date GOST engine is now being maintained in an external repository.
See:
https://wiki.openssl.org/index.php/Binaries
Reviewed-by: Richard Levitte <levitte@openssl.org>
Author: Remi Gacogne <rgacogne-github@coredump.fr>
GH334: Add an OCSP_SINGLERESP_get0_id() accessor to the OCSP_CERTID of
a OCSP_SINGLERESP. It is possible to do it the other way around using
OCSP_resp_find(), but this is more efficient when you have a tree indexed
by OCSP_CERTID, like haproxy does. (This is also RT4251)
Author: Marek Klein <kleinmrk@gmail.com>
GH556: OCSP_resp_get_produced_at() accessor to the producedAt of a
OCSP_BASICRESP
GH555: TS_STATUS_INFO_get_status(), TS_STATUS_INFO_get_text() and
TS_STATUS_INFO_get_failure_info() accessors for a TS_STATUS_INFO
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The entropy-gathering daemon is used only on a small number of machines.
Provide a configure knob so that EGD support can be disabled by default
but re-enabled on those systems that do need it.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
It turns out that -pause calls the undocumented function SSL_set_debug.
That just sets flag inside the SSL structure. That flag, despite
the command is never used. So remove the flag, the field, and the
function.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add CRYPTO_EX_DATA add EndC_KEY_[gs]et_method, From Roumen Petrov.
Had to add various exdata calls to init/copy/free the exdata.
Had to remove const from some EC functions because exdata isn't
const-correct. :(
Also remove EC_EXTRA_DATA and use a union to hold the possible
pre-computed values and an enum to tell which value is in the
union. (Rich Salz)
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
For some strange reason opensslconf.h was only defining DES_LONG
when included via des.h, but that's exceedingly fragile (as a
result of include guards the include via des.h might not actually
process the content again).
Ripped out the nesting constraint, now always define OSSL_DES_LONG
if not already defined. Note, this could just be DES_LONG, but
trying to avoid exposing DES_LONG in places where it has never been
seen before, so it is up to des.h to actually define DES_LONG as
OSSL_DES_LONG.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Well, I'm not actually changing time_t, just changing how time_t
valued opt values are converted from string to time_t.
Reviewed-by: Rich Salz <rsalz@openssl.org>
We follow the method used for EVP_MD.
Also, move all the internal EVP_CIPHER building macros from evp_locl.h
to evp_int.h. This will benefit our builtin EVP_CIPHERs.
Reviewed-by: Rich Salz <rsalz@openssl.org>
EVP_CIPHER_CTX_flags was returning the flags of its associated
EVP_CIPHER. However, EVP_CIPHER_CTX has flags of its own, so this
function is quite confusing and therefore error prone.
Reviewed-by: Rich Salz <rsalz@openssl.org>
New functions:
- EVP_CIPHER_CTX_encrypting()
- EVP_CIPHER_CTX_iv()
- EVP_CIPHER_CTX_iv_noconst()
- EVP_CIPHER_CTX_original_iv()
- EVP_CIPHER_CTX_buf_noconst()
- EVP_CIPHER_CTX_num()
- EVP_CIPHER_CTX_set_num()
- EVP_CIPHER_CTX_cipher_data()
- EVP_CIPHER_CTX_new_cipher_data()
Note that the accessors / writers for iv, buf and num may go away, as
those rather belong in the implementation's own structure (cipher_data)
when the implementation would affect them (that would be the case when
they are flagged EVP_CIPH_CUSTOM_IV or EVP_CIPH_FLAG_CUSTOM_CIPHER).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Following the method used for EVP_MD_CTX and HMAC_CTX,
EVP_CIPHER_CTX_init and EVP_CIPHER_CTX_cleanup are joined together
into one function, EVP_CIPHER_CTX_reset, with EVP_CIPHER_CTX_init kept
as an alias.
EVP_CIPHER_CTX_cleanup fills no purpose of its own any more and is
therefore removed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Make LHASH_OF use static inline functions.
Add new lh_get_down_load and lh_set_down_load functions and their
typesafe inline equivalents.
Make lh_error a function instead of a macro.
Reviewed-by: Rich Salz <rsalz@openssl.org>
These now take and return unsigned long, and get is constified.
Updated related documentation and util/ssleay.num
Reviewed-by: Matt Caswell <matt@openssl.org>
Make CRYPTO_mem_leaks() and CRYPTO_mem_leaks_fp() return a status value.
Update documentation. Don't abort() if there are leaks.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
In order for mkdep to find #ifdef'd functions, they must be
wrapped (in the header file) with
#ifndef OPENSSL_NO_...
So do that for various CRYPTO_mem_debug... things.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Provide backwards-compatiblity for functions, macros and include
files if OPENSSL_API_COMPAT is either not defined or defined less
than the version number of the release in which the feature was
deprecated.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Only two macros CRYPTO_MDEBUG and CRYPTO_MDEBUG_ABORT to control this.
If CRYPTO_MDEBUG is not set, #ifdef out the whole debug machinery.
(Thanks to Jakob Bohm for the suggestion!)
Make the "change wrapper functions" be the only paradigm.
Wrote documentation!
Format the 'set func' functions so their paramlists are legible.
Format some multi-line comments.
Remove ability to get/set the "memory debug" functions at runtme.
Remove MemCheck_* and CRYPTO_malloc_debug_init macros.
Add CRYPTO_mem_debug(int flag) function.
Add test/memleaktest.
Rename CRYPTO_malloc_init to OPENSSL_malloc_init; remove needless calls.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Applications wishing to include their own stacks now just need to include
DEFINE_STACK_OF(foo)
in a header file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Change DECLARE_STACK_OF into inline functions. This avoids the need for
auto generated mkstack.pl macros and now handles const properly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Also tweak some of the code in demos/bio, to enable interactive
testing of BIO_s_accept's use of SSL_dup. Changed the sconnect
client to authenticate the server, which now exercises the new
SSL_set1_host() function.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The protocol selection code is now consolidated in a few consecutive
short functions in a single file and is table driven. Protocol-specific
constraints that influence negotiation are moved into the flags
field of the method structure. The same protocol version constraints
are now applied in all code paths. It is now much easier to add
new protocol versions without reworking the protocol selection
logic.
In the presence of "holes" in the list of enabled client protocols
we no longer select client protocols below the hole based on a
subset of the constraints and then fail shortly after when it is
found that these don't meet the remaining constraints (suiteb, FIPS,
security level, ...). Ideally, with the new min/max controls users
will be less likely to create "holes" in the first place.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Add macro ossl_inline for use in public headers where a portable inline
is required. Change existing inline to use ossl_inline
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
This adds support for SSL/TLS configuration using configuration modules.
Sets of command value pairs are store and can be replayed through an
SSL_CTX or SSL structure using SSL_CTX_config or SSL_config.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rename to OPENSSL_mem_debug_{push,pop}.
Remove simple calls; keep only calls used in recursive functions.
Ensure we always push, to simplify so that we can always pop
Reviewed-by: Richard Levitte <levitte@openssl.org>
Just like *_clear_free routines. Previously undocumented, used
a half-dozen times within OpenSSL source.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
Add #define's for the old names.
Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros.
Reviewed-by: Tim Hudson <tjh@openssl.org>
New functions EC_POINT_point2buf and EC_KEY_key2buf which encode
a point and allocate a buffer in one call.
New function EC_KEY_oct2key() which sets public key in an EC_KEY
structure from an encoded point.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Most of all, that has inclusion of openssl/engine.h work even if EC
has been disabled. This is the same as has been done for DH, DSA, RSA
and more...
Reviewed-by: Stephen Henson <steve@openssl.org>
Rename ENGINE _EC_KEY functions to _EC.
Add support for EC_KEY_METHOD in ENGINE_set_default et al. Copy
ec_meth.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add keygen to EC_KEY_METHOD. Redirect EC_KEY_generate_key through
method and set the current EC key generation function as the default.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add EC_KEY_METHOD. This is part of the EC revision and will make EC behave
more like other algorithms. Specifically:
EC_KEY_METHOD is part of EC_KEY.
It is part of ENGINE.
Default or key specific implementations can be provided to redirect some
or all operations.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add new flag TLS1_FLAGS_RECEIVED_EXTMS which is set when the peer sends
the extended master secret extension.
Server now sends extms if and only if the client sent extms.
Check consistency of extms extension when resuming sessions following (where
practical) RFC7627.
Reviewed-by: Matt Caswell <matt@openssl.org>
Commit 6140f0365 added some new ctrl constants. However due to a
merge error one of these values was duplicated with an existing
value.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Looking over names, it seems like we usually use names ending with
_new and _free as object constructors and destructors. Also, since
EVP_MD_CTX_init is now used to reset a EVP_MD_CTX, it might as well be
named accordingly.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The idea is that with EVP_MD_CTX_create() and EVP_MD_CTX_destroy(),
EVP_MD_CTX_cleanup and EVP_MD_CTX_init is not used the same as before.
Instead, we need a single function that can be used to reinitialise an
existing EVP_MD_CTX that's been created with EVP_MD_CTX_create()
previously. Combining EVP_MD_CTX_cleanup and EVP_MD_CTX_init into
that one function is the answer.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This moves the definition to crypto/hmac/hmac_lcl.h. Constructor and
destructor added, and the typedef moved to include/openssl/ossl_typ.h.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This moves the definition to crypto/include/internal/evp_int.h and
defines all the necessary method creators, destructors, writers and
accessors. The name standard for the latter is inspired from the
corresponding functions to manipulate UI methods.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This change required some special treatment, as HMAC is intertwined
with EVP_MD. For now, all local HMAC_CTX variables MUST be
initialised with HMAC_CTX_EMPTY, or whatever happens to be on the
stack will be mistaken for actual pointers to EVP_MD_CTX. This will
change as soon as HMAC_CTX becomes opaque.
Also, since HMAC_CTX_init() can fail now, its return type changes from
void to int, and it will return 0 on failure, 1 on success.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This moves the definitionto crypto/evp/evp_locl.h, along with a few
associated accessor macros. A few accessor/writer functions added.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This only gets used to set a specific curve without actually checking that the
peer supports it or not and can therefor result in handshake failures that can
be avoided by selecting a different cipher.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Remove RSA_FLAG_SIGN_VER: this was origininally used to retain binary
compatibility after RSA_METHOD was extended to include rsa_sign and
rsa_verify fields. It is no longer needed.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove sign/verify and required_pkey_type fields of EVP_MD: these are a
legacy from when digests were linked to public key types. All signing is
now handled by the corresponding EVP_PKEY_METHOD.
Only allow supported digest types in RSA EVP_PKEY_METHOD: other algorithms
already block unsupported types.
Remove now obsolete EVP_dss1() and EVP_ecdsa().
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add CRYPTO_free_ex_index (for shared libraries)
Unify and complete the documentation for all "ex_data" API's and objects.
Replace xxx_get_ex_new_index functions with a macro.
Added an exdata test.
Renamed the ex_data internal datatypes.
Reviewed-by: Matt Caswell <matt@openssl.org>
Following on from the previous commit this adds some documentation for the
BN_with_flags function which is easy to misuse.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Add a ctrl to EVP_md5_sha1() to handle the additional operations needed
to handle SSL v3 client authentication and finished message.
Reviewed-by: Tim Hudson <tjh@openssl.org>
This patch contains the necessary changes to provide GOST 2012
ciphersuites in TLS. It requires the use of an external GOST 2012 engine.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
During rebasing of the async changes some error codes ended up being
duplicated so that "make errors" fails. This removes the duplication.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
Implements Thread Local Storage in the windows async port. This also has
some knock on effects to the posix and null implementations.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In theory the pthreads approach for Thread Local Storage should be more
portable.
This also changes some APIs in order to accommodate this change. In
particular ASYNC_init_pool is renamed ASYNC_init_thread and
ASYNC_free_pool is renamed ASYNC_cleanup_thread. Also introduced ASYNC_init
and ASYNC_cleanup.
Reviewed-by: Rich Salz <rsalz@openssl.org>
A lot of the pool handling code was in the arch specific files, but was
actually boiler plate and the same across the implementations. This commit
moves as much code as possible out of the arch specific files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
We were using _pipe to create a pipe on windows. This uses the "int" type
for its file descriptor for compatibility. However most windows functions
expect to use a "HANDLE". Probably we could get away with just casting but
it seems more robust to use the proper type and main stream windows
functions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There are potential deadlock situations that can occur if code executing
within the context of a job aquires a lock, and then pauses the job. This
adds an ability to temporarily block pauses from occuring whilst performing
work and holding a lock.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Initial API implemented for notifying applications that an ASYNC_JOB
has completed. Currently only s_server is using this. The Dummy Async
engine "cheats" in that it notifies that it has completed *before* it
pauses the job. A normal async engine would not do that.
Only the posix version of this has been implemented so far, so it will
probably fail to compile on Windows at the moment.
Reviewed-by: Rich Salz <rsalz@openssl.org>
It is expensive to create the ASYNC_JOB objects due to the "makecontext"
call. This change adds support for pools of ASYNC_JOB objects so that we
don't have to create a new ASYNC_JOB every time we want to use one.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Removed the function ASYNC_job_is_waiting() as it was redundant. The only
time user code has a handle on a job is when one is waiting, so all they
need to do is check whether the job is NULL. Also did some cleanups to
make sure the job really is NULL after it has been freed!
Reviewed-by: Rich Salz <rsalz@openssl.org>
The following entry points have been made async aware:
SSL_accept
SSL_read
SSL_write
Also added is a new mode - SSL_MODE_ASYNC. Calling the above functions with
the async mode enabled will initiate a new async job. If an async pause is
encountered whilst executing the job (such as for example if using SHA1/RSA
with the Dummy Async engine), then the above functions return with
SSL_WANT_ASYNC. Calling the functions again (with exactly the same args
as per non-blocking IO), will resume the job where it left off.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This engine is for developers of async aware applications. It simulates
asynchronous activity with external hardware. This initial version supports
SHA1 and RSA. Certain operations using those algorithms have async job
"pauses" in them - using the new libcrypto async capability.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Provides support for running asynchronous jobs. Currently this is completely
stand alone. Future commits will integrate this into libssl and s_server/
s_client. An asynchronous capable engine will be required to see any benefit
from this capability.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There are lots of calls to EVP functions from within libssl There were
various places where we should probably check the return value but don't.
This adds these checks.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Print certificate details using accessor functions.
Since X509_CERT_AUX_print is only used in one place and can't
be used by applications (it uses an internal X509_CERT_AUX structure)
this has been removed and replaced by a function X509_aux_print which
takes an X509 pointer instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The new function SSL_use_certificate_chain_file was always crashing in
the internal function use_certificate_chain_file because it would pass a
NULL value for SSL_CTX *, but use_certificate_chain_file would
unconditionally try to dereference it.
Reviewed-by: Stephen Henson <steve@openssl.org>
The actual implementation has the state of the connection being
controlled with the peer parameter, non-NULL meaning connected and
NULL meaning connected.
Reviewed-by: Andy Polyakov <appro@openssl.org>
BIO_int_ctrl isn't made for the purpose BIO_get_conn_int_port used it
for.
This also changes BIO_C_GET_CONNECT to actually return the port
instead of assigning it to a pointer that was never returned back to
the caller.
Reviewed-by: Andy Polyakov <appro@openssl.org>
A number of error codes were wrong due to a rebase of the state machine
code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove all the defines for the old state machines states. Mapping old to new
is probably going to cause more problems than it solves so it is probably
better to just remove them.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
SSL_state has been replaced by SSL_get_state and SSL_set_state is no longer
supported.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The macros SSL_in_connect_init() and SSL_in_accept_init() inadvertently
depended on SSL structure internals. This fixes it to use public API calls
instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rename the enum HANDSHAKE_STATE to OSSL_HANDSHAKE_STATE to ensure there are
no namespace clashes, and convert it into a typedef.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Previously each message specific process function would create its own
PACKET structure. Rather than duplicate all of this code lots of times we
should create it in the state machine itself.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
ssl.h and ssl3.h have a number of defines for the various states in the old
state machine code. Since this is public API it is not desirable to just
remove them. Instead redefine them to the closest equivalent state in the
new state machine code. If an application calls SSL_state then the return
value can still be compared against these old values if necessary. However
not all values have an equivalent state in the new code, so these are just
redefined to a dummy value.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Clean up and remove lots of code that is now no longer needed due to the
move to the new state machine.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Implement all of the necessary changes to make DTLS on the server work
with the new state machine code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Implement all of the necessary changes for moving TLS server side
processing into the new state machine code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Split the TLS server ssl3_get_* and ssl3_send_* functions into two ready
for the migration to the new state machine code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Move all DTLS client side processing into the new state machine code. A
subsequent commit will clean up the old dead code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Create a dtls_get_message function similar to the old dtls1_get_message but
in the format required for the new state machine code. The old function will
eventually be deleted in later commits.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The new state machine code will split up the reading and writing of
hanshake messages into discrete phases. In order to facilitate that the
existing "get" type functions will be split into two halves: one to get
the message and one to process it. The "send" type functions will also have
all work relating to constructing the message split out into a separate
function just for that. For some functions there will also be separate
pre and post "work" phases to prepare or update state.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
This is the first drop of the new state machine code.
The rewrite has the following objectives:
- Remove duplication of state code between client and server
- Remove duplication of state code between TLS and DTLS
- Simplify transitions and bring the logic together in a single location
so that it is easier to validate
- Remove duplication of code between each of the message handling functions
- Receive a message first and then work out whether that is a valid
transition - not the other way around (the other way causes lots of issues
where we are expecting one type of message next but actually get something
else)
- Separate message flow state from handshake state (in order to better
understand each)
- message flow state = when to flush buffers; handling restarts in the
event of NBIO events; handling the common flow of steps for reading a
message and the common flow of steps for writing a message etc
- handshake state = what handshake message are we working on now
- Control complexity: only the state machine can change state: keep all
the state changes local to a file
This builds on previous state machine related work:
- Surface CCS processing in the state machine
- Version negotiation rewrite
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The function ssl3_get_message gets a whole message from the underlying bio
and returns it to the state machine code. The new state machine code will
split this into two discrete steps: get the message header and get the
message body. This commit splits the existing function into these two
sub steps to facilitate the state machine implementation.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Note that this commit constifies a user callback parameter and therefore
will break compilation for applications using this callback. But unless
they are abusing write access to the buffer, the fix is trivial.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Original authors:
Rob Stradling <rob@comodo.com>
Dr. Stephen Henson <steve@openssl.org>
Reviewed-by: Emilia Kasper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
mkdef.pl was getting confused by:
# ifdef OPENSSL_NO_RMD160
# error RIPEMD is disabled.
# endif
Changing RIPEMD to RMD160 solves it. Fix suggested by Steve Henson.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This change introduces short names and NIDs for Russian GOST ciphers
according to GOST R 34.13-2015
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Move all packet parsing to the beginning of the method. This limits the
SSLv2 compatibility soup to the parsing, and makes the rest of the
processing uniform.
This is also needed for simpler EMS support: EMS servers need to do an
early scan for EMS to make resumption decisions. This'll be easier when
the entire ClientHello is parsed in the beginning.
As a side effect,
1) PACKETize ssl_get_prev_session and tls1_process_ticket; and
2) Delete dead code for SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG.
Reviewed-by: Matt Caswell <matt@openssl.org>
When a decoding error in ASN.1 occurs only free up the partial structure
at the top level. This simplifies embedded handling and fixes freeing
up of structures when presented with malformed input.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This patch updates the "DEFAULT" cipherstring to be
"ALL:!COMPLEMENTOFDEFAULT:!eNULL". COMPLEMENTOFDEFAULT is now defined
internally by a flag on each ciphersuite indicating whether it should be
excluded from DEFAULT or not. This gives us control at an individual
ciphersuite level as to exactly what is in DEFAULT and what is not.
Finally all DES, RC4 and RC2 ciphersuites are added to COMPLEMENTOFDEFAULT
and hence removed from DEFAULT.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Looks like someone forgot to do a "make update" since crypto/ts/Makefile
keeps changing. So include that.
Second is that the declare_dh_bn macro fools the libeay.num script.
The declarations are only needed in one file (dh_rfc5114) so remove
them from the header and put the "raw" declarations directly into that
file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Much related/similar work also done by
Ivan Nestlerode <ivan.nestlerode@sonos.com>
+Replace FILE BIO's with dummy ops that fail.
+Include <stdio.h> for sscanf() even with no-stdio (since the declaration
is there). We rely on sscanf() to parse the OPENSSL_ia32cap environment
variable, since it can be larger than a 'long'. And we don't rely on the
availability of strtoull().
+Remove OPENSSL_stderr(); not used.
+Make OPENSSL_showfatal() do nothing (currently without stdio there's
nothing we can do).
+Remove file-based functionality from ssl/. The function
prototypes were already gone, but not the functions themselves.
+Remove unviable conf functionality via SYS_UEFI
+Add fallback definition of BUFSIZ.
+Remove functions taking FILE * from header files.
+Add missing DECLARE_PEM_write_fp_const
+Disable X509_LOOKUP_hash_dir(). X509_LOOKUP_file() was already compiled out,
so remove its prototype.
+Use OPENSSL_showfatal() in CRYPTO_destroy_dynlockid().
+Eliminate SRP_VBASE_init() and supporting functions. Users will need to
build the verifier manually instead.
+Eliminate compiler warning for unused do_pk8pkey_fp().
+Disable TEST_ENG_OPENSSL_PKEY.
+Disable GOST engine as is uses [f]printf all over the place.
+Eliminate compiler warning for unused send_fp_chars().
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
On Windows OPENSSL_EXPORT_VAR_AS_FUNCTION is defined and in a sense
this modification simply harmonizes it with "VAR_AS_VAR".
Reviewed-by: Rich Salz <rsalz@openssl.org>
Previously you could only set both the default path and file locations
together. This adds the ability to set one without the other.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The existing implementation of DTLSv1_listen() is fundamentally flawed. This
function is used in DTLS solutions to listen for new incoming connections
from DTLS clients. A client will send an initial ClientHello. The server
will respond with a HelloVerifyRequest containing a unique cookie. The
client the responds with a second ClientHello - which this time contains the
cookie.
Once the cookie has been verified then DTLSv1_listen() returns to user code,
which is typically expected to continue the handshake with a call to (for
example) SSL_accept().
Whilst listening for incoming ClientHellos, the underlying BIO is usually in
an unconnected state. Therefore ClientHellos can come in from *any* peer.
The arrival of the first ClientHello without the cookie, and the second one
with it, could be interspersed with other intervening messages from
different clients.
The whole purpose of this mechanism is as a defence against DoS attacks. The
idea is to avoid allocating state on the server until the client has
verified that it is capable of receiving messages at the address it claims
to come from. However the existing DTLSv1_listen() implementation completely
fails to do this. It attempts to super-impose itself on the standard state
machine and reuses all of this code. However the standard state machine
expects to operate in a stateful manner with a single client, and this can
cause various problems.
A second more minor issue is that the return codes from this function are
quite confused, with no distinction made between fatal and non-fatal errors.
Most user code treats all errors as non-fatal, and simply retries the call
to DTLSv1_listen().
This commit completely rewrites the implementation of DTLSv1_listen() and
provides a stand alone implementation that does not rely on the existing
state machine. It also provides more consistent return codes.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Add the ability to peek at a message from the DTLS read BIO. This is needed
for the DTLSv1_listen rewrite.
Reviewed-by: Andy Polyakov <appro@openssl.org>
BUF_strndup was calling strlen through BUF_strlcpy, and ended up reading
past the input if the input was not a C string.
Make it explicitly part of BUF_strndup's contract to never read more
than |siz| input bytes. This augments the standard strndup contract to
be safer.
The commit also adds a check for siz overflow and some brief documentation
for BUF_strndup().
Reviewed-by: Matt Caswell <matt@openssl.org>
New ASN.1 macro ASN1_EMBED. This is the same as ASN1_SIMPLE except the
structure is not allocated: it is part of the parent. That is instead of
FOO *x;
it must be:
FOO x;
This reduces memory fragmentation and make it impossible to accidentally
set a mandatory field to NULL.
This currently only works for SEQUENCE and since it is equivalent to
ASN1_SIMPLE it cannot be tagged, OPTIONAL, SET OF or SEQUENCE OF.
Reviewed-by: Rich Salz <rsalz@openssl.org>
When OPENSSL_EXPORT_VAR_AS_FUNCTION is defined, the static_ASN1_ITEM_start
macro doesn't exist so the build fails. This problem was introduced in
commit df2ee0e.
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Functions to retrieve the function pointer of an existing method: this
can be used to create a method which intercepts or modifies the behaviour
of an existing method while retaining most of the existing behaviour.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This provides support for building in the EDK II reference implementation
of UEFI. Most UEFI firmware in existence uses OpenSSL for implementing
the core cryptographic functionality needed for Secure Boot.
This has always previously been handled with external patches to OpenSSL
but we are now making a concerted effort to eliminate those.
In this mode, we don't actually use the OpenSSL makefiles; we process
the MINFO file generated by 'make files' and incorporate it into the
EDK2 build system.
Since EDK II builds for various targets with varying word size and we
need to have a single prepackaged configuration, we deliberately don't
hard-code the setting of SIXTY_FOUR_BIT vs. THIRTY_TWO_BIT in
opensslconf.h. We bypass that for OPENSSL_SYS_UEFI and allow EDK II
itself to set those, depending on the architecture.
For x86_64, EDK II sets SIXTY_FOUR_BIT and thus uses 'long long' for the
64-bit type, even when building with GCC where 'long' is also 64-bit. We
do this because the Microsoft toolchain has 32-bit 'long'.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Most of the accessors existed and were already used so it was easy.
TS_VERIFY_CTX didn't have accessors/settors so I added the simple and
obvious ones, and changed the app to use them. Also, within crypto/ts,
replaced the functions with direct access to the structure members
since we generally aren't opaque within a directory.
Also fix RT3901.
Reviewed-by: Tim Hudson <tjh@openssl.org>
In some environments, such as firmware, the current system time is entirely
meaningless. Provide a clean mechanism to suppress the checks against it.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
This does 64-bit division and multiplication, and on 32-bit platforms
pulls in libgcc symbols (and MSVC does similar) which may not be
available. Mostly done by David Woodhouse.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
This reverts the non-cleanup parts of commit c73ad69017. We do actually
have a reasonable use case for OPENSSL_NO_RFC3779 in the EDK2 UEFI
build, since we don't have a strspn() function in our runtime environment
and we don't want the RFC3779 functionality anyway.
In addition, it changes the default behaviour of the Configure script so
that RFC3779 support isn't disabled by default. It was always disabled
from when it was first added in 2006, right up until the point where
OPENSSL_NO_RFC3779 was turned into a no-op, and the code in the
Configure script was left *trying* to disable it, but not actually
working.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Also has changes from from David Woodhouse <David.Woodhouse@intel.com>
and some tweaks from me.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Add test to check PBE lookups: these can fail if the PBE table is not
correctly orders. Add to "make test".
Reviewed-by: Matt Caswell <matt@openssl.org>
There are many places (nearly 50) where we malloc and then memset.
Add an OPENSSL_zalloc routine to encapsulate that.
(Missed one conversion; thanks Richard)
Also fixes GH328
Reviewed-by: Richard Levitte <levitte@openssl.org>
The |z| value should be 0x04 not 0x02
RT#3838
Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
clang suggests %llu instead, but it isn't clear that is portable on
all platforms.
C99 and above define a handy macro for us, so we try to use that
definition and fall back to current definition if needed (though we
switch to 'u' for unsigned).
Reviewed-by: Matt Caswell <matt@openssl.org>
This was obsolete in 2001. This is not the same as Gost94 digest.
Thanks to Dmitry Belyavsky <beldmit@gmail.com> for review and advice.
Reviewed-by: Matt Caswell <matt@openssl.org>
If a client receives a ServerKeyExchange for an anon DH ciphersuite with the
value of p set to 0 then a seg fault can occur. This commits adds a test to
reject p, g and pub key parameters that have a 0 value (in accordance with
RFC 5246)
The security vulnerability only affects master and 1.0.2, but the fix is
additionally applied to 1.0.1 for additional confidence.
CVE-2015-1794
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
make errors wants things in a different order to the way things are
currently defined in the header files. The easiest fix is to just let it
reorder it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The handling of incoming CCS records is a little strange. Since CCS is not
a handshake message it is handled differently to normal handshake messages.
Unfortunately whilst technically it is not a handhshake message the reality
is that it must be processed in accordance with the state of the handshake.
Currently CCS records are processed entirely within the record layer. In
order to ensure that it is handled in accordance with the handshake state
a flag is used to indicate that it is an acceptable time to receive a CCS.
Previously this flag did not exist (see CVE-2014-0224), but the flag should
only really be considered a workaround for the problem that CCS is not
visible to the state machine.
Outgoing CCS messages are already handled within the state machine.
This patch makes CCS visible to the TLS state machine. A separate commit
will handle DTLS.
Reviewed-by: Tim Hudson <tjh@openssl.org>
This flag was not set anywhere within the codebase (only read). It could
only be set by an app reaching directly into s->s3->flags and setting it
directly. However that method became impossible when libssl was opaquified.
Even in 1.0.2/1.0.1 if an app set the flag directly it is only relevant to
ssl3_connect(), which calls SSL_clear() during initialisation that clears
any flag settings. Therefore it could take effect if the app set the flag
after the handshake has started but before it completed. It seems quite
unlikely that any apps really do this (especially as it is completely
undocumented).
The purpose of the flag is suppress flushing of the write bio on the client
side at the end of the handshake after the client has written the Finished
message whilst resuming a session. This enables the client to send
application data as part of the same flight as the Finished message.
This flag also controls the setting of a second flag SSL3_FLAGS_POP_BUFFER.
There is an interesting comment in the code about this second flag in the
implementation of ssl3_write:
/* This is an experimental flag that sends the
* last handshake message in the same packet as the first
* use data - used to see if it helps the TCP protocol during
* session-id reuse */
It seems the experiment did not work because as far as I can tell nothing
is using this code. The above comment has been in the code since SSLeay.
This commit removes support for SSL3_FLAGS_DELAY_CLIENT_FINISHED, as well
as the associated SSL3_FLAGS_POP_BUFFER.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Removed ability to set ex_data impl at runtime. This removed these
three functions:
const CRYPTO_EX_DATA_IMPL *CRYPTO_get_ex_data_implementation(void);
int CRYPTO_set_ex_data_implementation(const CRYPTO_EX_DATA_IMPL *i);
int CRYPTO_ex_data_new_class(void);
It is no longer possible to change the ex_data implementation at
runtime. (Luckily those functions were never documented :)
Also removed the ability to add new exdata "classes." We don't believe
this received much (if any) use, since you can't add it to OpenSSL objects,
and there are probably better (native) methods for developers to add
their own extensible data, if they really need that.
Replaced the internal hash table (of per-"class" stacks) with a simple
indexed array. Reserved an index for "app" application.
Each API used to take the lock twice; now it only locks once.
Use local stack storage for function pointers, rather than malloc,
if possible (i.e., number of ex_data items is under a dozen).
Make CRYPTO_EX_DATA_FUNCS opaque/internal.
Also fixes RT3710; index zero is reserved.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The -show_chain flag to the verify command line app shows information about
the chain that has been built. This commit adds the text "untrusted" against
those certificates that have been used from the untrusted list.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Rewrite ssl3_digest_cached_records handling. Only digest cached records
if digest array is NULL: this means it is safe to call
ssl3_digest_cached_records multiple times (subsequent calls are no op).
Remove flag TLS1_FLAGS_KEEP_HANDSHAKE instead only update handshake buffer
if digest array is NULL.
Add additional "keep" parameter to ssl3_digest_cached_records to indicate
if the handshake buffer should be retained after digesting cached records
(needed for TLS 1.2 client authentication).
Reviewed-by: Matt Caswell <matt@openssl.org>
Add secure heap for storage of private keys (when possible).
Add BIO_s_secmem(), CBIGNUM, etc.
Add BIO_CTX_secure_new so all BIGNUM's in the context are secure.
Contributed by Akamai Technologies under the Corporate CLA.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Recent HMAC changes broke ABI compatibility due to a new field in HMAC_CTX.
This backs that change out, and does it a different way.
Thanks to Timo Teras for the concept.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This is a workaround so old that nobody remembers what buggy clients
it was for. It's also been broken in stable branches for two years and
nobody noticed (see
https://boringssl-review.googlesource.com/#/c/1694/).
Reviewed-by: Tim Hudson <tjh@openssl.org>
The return type of BIO_number_read() and BIO_number_written() as well as
the corresponding num_read and num_write members in the BIO structure has
been changed from unsigned long to uint64_t. On platforms where an unsigned
long is 32 bits (e.g. Windows) these counters could overflow if >4Gb is
transferred.
With thanks to the Open Crypto Audit Project for reporting this issue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If a NewSessionTicket is received by a multi-threaded client when
attempting to reuse a previous ticket then a race condition can occur
potentially leading to a double free of the ticket data.
CVE-2015-1791
This also fixes RT#3808 where a session ID is changed for a session already
in the client session cache. Since the session ID is the key to the cache
this breaks the cache access.
Parts of this patch were inspired by this Akamai change:
c0bf69a791
Reviewed-by: Rich Salz <rsalz@openssl.org>
Using an enum with -Wswitch means all lookup routines handle
all cases. Remove X509_LU_PKEY which was never used.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The new accessors SSL_get_client_random, SSL_get_server_random and
SSL_SESSION_get_master_key should return a size_t to match the type of the
|outlen| parameter.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Change the new SSL_get_client_random(), SSL_get_server_random() and
SSL_SESSION_get_master_key() functions to use size_t for |outlen| instead of
int.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Tor uses these values to implement a low-rent clone of RFC 5705 (which,
in our defense, we came up with before RFC 5705 existed). But now that
ssl_st is opaque, we need another way to get at them.
Includes documentation, with suitable warnings about not actually
using these functions.
Signed-off-by: Nick Mathewson <nickm@torproject.org>
Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
On the server side, if you want to know which ciphers the client
offered, you had to use session->ciphers. But that field is no
longer visible, so we need a method to get at it.
Signed-off-by: Nick Mathewson <nickm@torproject.org>
Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
This adds a new function which will encrypt a private key using PKCS#8
based on an X509_ALGOR structure and reimplements PKCS8_encrypt to use it.
Update pkcs8 utlity to use PKCS8_set0_pbe.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The functions BN_rshift and BN_lshift shift their arguments to the right or
left by a specified number of bits. Unpredicatable results (including
crashes) can occur if a negative number is supplied for the shift value.
Thanks to Mateusz Kocielski (LogicalTrust), Marek Kroemeke and Filip Palian
for discovering and reporting this issue.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Given the pervasive nature of TLS extensions it is inadvisable to run
OpenSSL without support for them. It also means that maintaining
the OPENSSL_NO_TLSEXT option within the code is very invasive (and probably
not well tested). Therefore it is being removed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
This adds support for the ASN.1 structures in draft-josefsson-scrypt-kdf-03
Private keys encrypted by scrypt can now be decrypted transparently as long
as they don't exceed the memory limits.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Rewrite and tidy ASN1_INTEGER and ASN1_ENUMERATED handling.
Remove code duplication.
New functions to convert between int64_t and ASN.1 types without the
quirks of the old long conversion functions.
Add documentation.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Following the version negotiation rewrite all of the previous code that was
dedicated to version negotiation can now be deleted - all six source files
of it!!
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Continuing from the previous commit this changes the way we do client side
version negotiation. Similarly all of the s23* "up front" state machine code
has been avoided and again things now work much the same way as they already
did for DTLS, i.e. we just do most of the work in the
ssl3_get_server_hello() function.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
This commit changes the way that we do server side protocol version
negotiation. Previously we had a whole set of code that had an "up front"
state machine dedicated to the negotiating the protocol version. This adds
significant complexity to the state machine. Historically the justification
for doing this was the support of SSLv2 which works quite differently to
SSLv3+. However, we have now removed support for SSLv2 so there is little
reason to maintain this complexity.
The one slight difficulty is that, although we no longer support SSLv2, we
do still support an SSLv3+ ClientHello in an SSLv2 backward compatible
ClientHello format. This is generally only used by legacy clients. This
commit adds support within the SSLv3 code for these legacy format
ClientHellos.
Server side version negotiation now works in much the same was as DTLS,
i.e. we introduce the concept of TLS_ANY_VERSION. If s->version is set to
that then when a ClientHello is received it will work out the most
appropriate version to respond with. Also, SSLv23_method and
SSLv23_server_method have been replaced with TLS_method and
TLS_server_method respectively. The old SSLv23* names still exist as
macros pointing at the new name, although they are deprecated.
Subsequent commits will look at client side version negotiation, as well of
removal of the old s23* code.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Follow the same convention the other OPENSSL_NO_xxx header files
do, and use #error instead of making the header file be a no-op.
Reviewed-by: Matt Caswell <matt@openssl.org>
There are header files in crypto/ that are used by the rest of
OpenSSL. Move those to include/internal and adapt the affected source
code, Makefiles and scripts.
The header files that got moved are:
crypto/constant_time_locl.h
crypto/o_dir.h
crypto/o_str.h
Reviewed-by: Matt Caswell <matt@openssl.org>
Having the INTxx_MIN et al macros defined in a public header is
unnecessary and risky. Also, it wasn't done for all platforms that
might need it.
So we move those numbers to an internal header file, do the math
ourselves and make sure to account for the integer representations we
know of.
This introduces include/internal, which is unproblematic since we
already use -I$(TOP)/include everywhere. This directory is different
from crypto/include/internal, as the former is more general internal
headers for all of OpenSSL, while the latter is for libcrypto only.
Reviewed-by: Matt Caswell <matt@openssl.org>
Include appropriate headers for standard integer types in e_os2.h
This should use stdint.h, inttypes.h or a workaround for systems which
have neither.
Reviewed-by: Matt Caswell <matt@openssl.org>
Following on from the removal of libcrypto and libssl support for Kerberos
this commit removes all remaining references to Kerberos.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Remove RFC2712 Kerberos support from libssl. This code and the associated
standard is no longer considered fit-for-purpose.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Since COMP_METHOD is now defined in comp_lcl.h, it is no
longer possible to create new TLS compression methods without
using the OpenSSL source. Only ZLIB is supported by default.
Also, since the types are opaque, #ifdef guards to use "char *"
instead of the real type aren't necessary.
The changes are actually minor. Adding missing copyright to some
files makes the diff misleadingly big.
Reviewed-by: Matt Caswell <matt@openssl.org>
Add SSL_use_certiicate_chain file functions: this is works the same
way as SSL_CTX_use_certificate_chain_file but for an SSL structure.
Update SSL_CONF code to use the new function.
Update docs.
Update ordinals.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add command line switch entries to table and return SSL_CONF_TYPE_NONE for
them in SSL_CONF_cmd_value_type.
Update docs.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reusing an SSL object when it has encountered a fatal error can
have bad consequences. This is a bug in application code not libssl
but libssl should be more forgiving and not crash.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The various implementations of EVP_CTRL_AEAD_TLS_AAD expect a buffer of at
least 13 bytes long. Add sanity checks to ensure that the length is at
least that. Also add a new constant (EVP_AEAD_TLS1_AAD_LEN) to evp.h to
represent this length. Thanks to Kevin Wojtysiak (Int3 Solutions) and
Paramjot Oberoi (Int3 Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Add OPENSSL_clear_free which merges cleanse and free.
(Names was picked to be similar to BN_clear_free, etc.)
Removed OPENSSL_freeFunc macro.
Fixed the small simple ones that are left:
CRYPTO_free CRYPTO_free_locked OPENSSL_free_locked
Reviewed-by: Richard Levitte <levitte@openssl.org>
There were a set of includes in dtls1.h which are now redundant due to the
libssl opaque work. This commit removes those includes, which also has the
effect of resolving one issue preventing building on windows (i.e. the
include of winsock.h)
Reviewed-by: Andy Polyakov <appro@openssl.org>
Remove ERR_[gs]et_implementation as they were not undocumented and
useless (the data structure was opaque).
Halve the number of lock/unlock calls in almost all ERR_
functions by letting the caller of get_hash or int_thread_set
able to lock. Very useful when looping, such as adding errors,
or when getting the hash and immediately doing a lookup on it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add tables to convert between SSL_CIPHER fields and indices for ciphers
and MACs.
Reorganise ssl_ciph.c to use tables to lookup values and load them.
New functions SSL_CIPHER_get_cipher_nid and SSL_CIPHER_get_digest_nid.
Add documentation.
Reviewed-by: Rich Salz <rsalz@openssl.org>
EAP-FAST session resumption relies on handshake message lookahead
to determine server intentions. Commits
980bc1ec61
and
7b3ba508af
removed the lookahead so broke session resumption.
This change partially reverts the commits and brings the lookahead back
in reduced capacity for TLS + EAP-FAST only. Since EAP-FAST does not
support regular session tickets, the lookahead now only checks for a
Finished message.
Regular handshakes are unaffected by this change.
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Rather than making include/openssl/foo.h a symlink to
crypto/foo/foo.h, this change moves the file to include/openssl/foo.h
once and for all.
Likewise, move crypto/foo/footest.c to test/footest.c, instead of
symlinking it there.
Originally-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
