Fixes: issue #3747
make SSL_CIPHER_standard_name globally available and introduce a new
function OPENSSL_cipher_name.
A new option '-convert' is also added to 'openssl ciphers' app.
Documentation and test cases are added.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3859)
Looking at
http://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-90Ar1.pdf
we see that in the CTR_DRBG_Update() algorithm (internal page number 51),
the provided input data is (after truncation to seedlen) xor-d with the
key and V vector (of length keylen and blocklen respectively). The comment
in ctr_XOR notes that xor-ing with 0 is the identity function, so we can
just ignore the case when the provided input is shorter than seedlen.
The code in ctr_XOR() then proceeds to xor the key with the input, up
to the amount of input present, and computes the remaining input that
could be used to xor with the V vector, before accessing a full 16-byte
stretch of the input vector and ignoring the calculated length. The correct
behavior is to respect the supplied input length and only xor the
indicated number of bytes.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3971)
The intention of the removed code was to check if the previous operation
carried. However this does not work. The "mask" value always ends up being
a constant and is all ones - thus it has no effect. This check is no longer
required because of the previous commit.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3832)
In TLS mode of operation the padding value "pad" is obtained along with the
maximum possible padding value "maxpad". If pad > maxpad then the data is
invalid. However we must continue anyway because this is constant time code.
We calculate the payload length like this:
inp_len = len - (SHA_DIGEST_LENGTH + pad + 1);
However if pad is invalid then inp_len ends up -ve (actually large +ve
because it is a size_t).
Later we do this:
/* verify HMAC */
out += inp_len;
len -= inp_len;
This ends up with "out" pointing before the buffer which is undefined
behaviour. Next we calculate "p" like this:
unsigned char *p =
out + len - 1 - maxpad - SHA256_DIGEST_LENGTH;
Because of the "out + len" term the -ve inp_len value is cancelled out
so "p" points to valid memory (although technically the pointer arithmetic
is undefined behaviour again).
We only ever then dereference "p" and never "out" directly so there is
never an invalid read based on the bad pointer - so there is no security
issue.
This commit fixes the undefined behaviour by ensuring we use maxpad in
place of pad, if the supplied pad is invalid.
With thanks to Brian Carpenter for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3832)
Ported from the last FIPS release, with DUAL_EC and SHA1 and the
self-tests removed. Since only AES-CTR is supported, other code
simplifications were done. Removed the "entropy blocklen" concept.
Moved internal functions to new include/internal/rand.h.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3789)
We now allow a different protocol version when reusing a session so we can
unconditionally reset the SSL_METHOD if it has changed.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3954)
SSL_clear() does not reset the SSL_METHOD if a session already exists in
the SSL object. However, TLSv1.3 does not have an externally visible
version fixed method (only an internal one). The state machine assumes
that we are always starting from a version flexible method for TLSv1.3.
The simplest solution is to just fix SSL_clear() to always reset the method
if it is using the internal TLSv1.3 version fixed method.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3954)
TLSv1.3 draft-21 requires the ticket nonce to be at least 1 byte in length.
However NSS sends a zero length nonce. This is actually ok because the next
draft will allow zero length nonces anyway, so we should tolerate this.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3957)
This is an inherent weakness of the padding mode. We can't make the
implementation constant time (see the comments in rsa_pk1.c), so add a
warning to the docs.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Standardized the -rand flag and added a new one:
-rand file...
Always reads the specified files
-writerand file
Always writes to the file on exit
For apps that use a config file, the RANDFILE config parameter reads
the file at startup (to seed the RNG) and write to it on exit if
the -writerand flag isn't used.
Ensured that every app that took -rand also took -writerand, and
made sure all of that agreed with all the documentation.
Fix error reporting in write_file and -rand
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3862)
This patch addresses the use of uninitialised data raised in Coverity
issues 1414881 and 1414882.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3929)
New register usage pattern allows to achieve sligtly better
performance. Not as much as I hoped for. Performance is believed
to be limited by irreconcilable write-back conflicts, rather than
lack of computational resources or data dependencies.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This gives much more freedom to rearrange instructions. This is
unoptimized version, provided for reference. Basically you need
to compare it to initial 29724d0e15
to figure out the key difference.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If we have a local file with a name starting with 'file:', we don't
want to check if the part after 'file:' is absolute. Instead, mark
each possibility for absolute check if needed, and perform the
absolute check later on, when checking each actual path.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3907)
These cases are performed on Linux only. They check that files with
names starting with 'file:' can be processed as well.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3907)
To handle paths that contain devices (for example, C:/foo/bar.pem on
Windows), try to "open" the URI using the file scheme loader first,
and failing that, check if the device is really a scheme we know.
The "file" scheme does the same kind of thing to pick out the path
part of the URI.
An exception to this special treatment is if the URI has an authority
part (something that starts with "//" directly after what looks like a
scheme). Such URIs will never be treated as plain file paths.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3907)
to_rel_file_uri really treated all files appropriately, absolute and
relative alike, and really just constructs a URI, so gets renamed to
to_file_uri
to_file_uri, on the other hand, forces the path into an absolute one,
so gets renamed to to_abs_file_uri
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3907)
Remove unused rand_hw_xor, MD/EVP indirection
Make rand_pseudo same as rand.
Cleanup formatting and ifdef control
Rename some things:
- rand_meth to openssl_rand_meth; make it global
- source file
- lock/init functions, start per-thread state
- ossl_meth_init to ossl_rand_init
Put state into RAND_STATE structure
And put OSSL_RAND_STATE into ossl_typ.h
Use "randomness" instead of "entropy"
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3758)
With added commenting to describe the individual decoders a little
more.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3930)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3925)
This resolves the retry issue in general, but also the specific case where a TLS 1.3 server sends a post-handshake NewSessionTicket message prior to appdata.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3925)
Add the -preserve_dates dates option to preserve dates when signing
a certificate.
Prevent -days and -preserve_dates being used simultaneously
Fixes#946
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/946)
