Add a status return value instead of void.
Add some sanity checks on reference counter value.
Update the docs.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
If the application has limited the size of the async pool using
ASYNC_init_thread() then we could run out of jobs while trying to start a
libssl io operation. However libssl was failing to handle this and treating
it like a fatal error. It should not be fatal...we just need to retry when
there are jobs available again.
Reviewed-by: Richard Levitte <levitte@openssl.org>
It is up to the caller of SSL_dane_tlsa_add() to take appropriate
action when no records are added successfully or adding some records
triggers an internal error (negative return value).
With this change the caller can continue with PKIX if desired when
none of the TLSA records are usable, or take some appropriate action
if DANE is required.
Also fixed the internal ssl_dane_dup() function to properly initialize
the TLSA RR stack in the target SSL handle. Errors in ssl_dane_dup()
are no longer ignored.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add an accessor for SSL_CTX.
Since libssl was made opaque, there is no way for users to access the
cipher_list, while users can set the cipher_list by
SSL_CTX_set_cipher_list().
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Since NDEBUG is defined unconditionally on command line for release
builds, we can omit *_DEBUG options in favour of effective "all-on"
in debug builds exercised though CI.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Suppress CT callbacks with aNULL or PSK ciphersuites that involve
no certificates. Ditto when the certificate chain is validated via
DANE-TA(2) or DANE-EE(3) TLSA records. Also skip SCT processing
when the chain is fails verification.
Move and consolidate CT callbacks from libcrypto to libssl. We
also simplify the interface to SSL_{,CTX_}_enable_ct() which can
specify either a permissive mode that just collects information or
a strict mode that requires at least one valid SCT or else asks to
abort the connection.
Simplified SCT processing and options in s_client(1) which now has
just a simple pair of "-noct" vs. "-ct" options, the latter enables
the permissive callback so that we can complete the handshake and
report all relevant information. When printing SCTs, print the
validation status if set and not valid.
Signed-off-by: Rob Percival <robpercival@google.com>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Move the the BIO_METHOD and BIO structures into internal header files,
provide appropriate accessor methods and update all internal code to use
the new accessors where appropriate.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Don't have #error statements in header files, but instead wrap
the contents of that file in #ifndef OPENSSL_NO_xxx
This means it is now always safe to include the header file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove 'log' field from SCT and related accessors
In order to still have access to an SCT's CTLOG when calling SCT_print,
SSL_CTX_get0_ctlog_store has been added.
Improved documentation for some CT functions in openssl/ssl.h.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
* Perform ALPN after the SNI callback; the SSL_CTX may change due to
that processing
* Add flags to indicate that we actually sent ALPN, to properly error
out if unexpectedly received.
* clean up ssl3_free() no need to explicitly clear when doing memset
* document ALPN functions
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
This is similar to SSL_pending() but just returns a 1 if there is data
pending in the internal OpenSSL buffers or 0 otherwise (as opposed to
SSL_pending() which returns the number of bytes available). Unlike
SSL_pending() this will work even if "read_ahead" is set (which is the
case if you are using read pipelining, or if you are doing DTLS). A 1
return value means that we have unprocessed data. It does *not* necessarily
indicate that there will be application data returned from a call to
SSL_read(). The unprocessed data may not be application data or there
could be errors when we attempt to parse the records.
Reviewed-by: Tim Hudson <tjh@openssl.org>
This capability is required for read pipelining. We will only read in as
many records as will fit in the read buffer (and the network can provide
in one go). The bigger the buffer the more records we can process in
parallel.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Read pipelining is controlled in a slightly different way than with write
pipelining. While reading we are constrained by the number of records that
the peer (and the network) can provide to us in one go. The more records
we can get in one go the more opportunity we have to parallelise the
processing.
There are two parameters that affect this:
* The number of pipelines that we are willing to process in one go. This is
controlled by max_pipelines (as for write pipelining)
* The size of our read buffer. A subsequent commit will provide an API for
adjusting the size of the buffer.
Another requirement for this to work is that "read_ahead" must be set. The
read_ahead parameter will attempt to read as much data into our read buffer
as the network can provide. Without this set, data is read into the read
buffer on demand. Setting the max_pipelines parameter to a value greater
than 1 will automatically also turn read_ahead on.
Finally, the read pipelining as currently implemented will only parallelise
the processing of application data records. This would only make a
difference for renegotiation so is unlikely to have a significant impact.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Use the new pipeline cipher capability to encrypt multiple records being
written out all in one go. Two new SSL/SSL_CTX parameters can be used to
control how this works: max_pipelines and split_send_fragment.
max_pipelines defines the maximum number of pipelines that can ever be used
in one go for a single connection. It must always be less than or equal to
SSL_MAX_PIPELINES (currently defined to be 32). By default only one
pipeline will be used (i.e. normal non-parallel operation).
split_send_fragment defines how data is split up into pipelines. The number
of pipelines used will be determined by the amount of data provided to the
SSL_write call divided by split_send_fragment. For example if
split_send_fragment is set to 2000 and max_pipelines is 4 then:
SSL_write called with 0-2000 bytes == 1 pipeline used
SSL_write called with 2001-4000 bytes == 2 pipelines used
SSL_write called with 4001-6000 bytes == 3 pipelines used
SSL_write_called with 6001+ bytes == 4 pipelines used
split_send_fragment must always be less than or equal to max_send_fragment.
By default it is set to be equal to max_send_fragment. This will mean that
the same number of records will always be created as would have been
created in the non-parallel case, although the data will be apportioned
differently. In the parallel case data will be spread equally between the
pipelines.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Without this, the peer certificate would never be deleted, resulting in
a memory leak.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Disabled by default, but can be enabled by setting the
ct_validation_callback on a SSL or SSL_CTX.
Reviewed-by: Ben Laurie <ben@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
This patch provides getters for default_passwd_cb and userdata for SSL
and SSL_CTX. The getter functions are required to port Python's ssl module
to OpenSSL 1.1.0.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Implementation experience has shown that the original plan for async wait
fds was too simplistic. Originally the async logic created a pipe internally
and user/engine code could then get access to it via API calls. It is more
flexible if the engine is able to create its own fd and provide it to the
async code.
Another issue is that there can be a lot of churn in the fd value within
the context of (say) a single SSL connection leading to continually adding
and removing fds from (say) epoll. It is better if we can provide some
stability of the fd value across a whole SSL connection. This is
problematic because an engine has no concept of an SSL connection.
This commit refactors things to introduce an ASYNC_WAIT_CTX which acts as a
proxy for an SSL connection down at the engine layer.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Simplifies calling code. Also fixed up any !ptr tests that were
nearby, turning them into NULL tests.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The ssl_set_masks() function no longer depends on the cipher. This
also means there is no need to set the masks for each cipher in
ssl3_choose_cipher.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add -DBIO_DEBUG to --strict-warnings.
Remove comments about outdated debugging ifdef guards.
Remove md_rand ifdef guarding an assert; it doesn't seem used.
Remove the conf guards in conf_api since we use OPENSSL_assert, not assert.
For pkcs12 stuff put OPENSSL_ in front of the macro name.
Merge TLS_DEBUG into SSL_DEBUG.
Various things just turned on/off asserts, mainly for checking non-NULL
arguments, which is now removed: camellia, bn_ctx, crypto/modes.
Remove some old debug code, that basically just printed things to stderr:
DEBUG_PRINT_UNKNOWN_CIPHERSUITES, DEBUG_ZLIB, OPENSSL_RI_DEBUG,
RL_DEBUG, RSA_DEBUG, SCRYPT_DEBUG.
Remove OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
As handshake_func is a function pointer, it should compare to NULL
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Remove support for static ECDH ciphersuites. They require ECDH keys
in certificates and don't support forward secrecy.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The new init functions can fail if the library has already been stopped. We
should be able to indicate failure with a 0 return value.
Reviewed-by: Rich Salz <rsalz@openssl.org>
As documented both SSL_get0_dane_authority() and SSL_get0_dane_tlsa()
are expected to return a negative match depth and nothing else when
verification fails. However, this only happened when verification
failed during chain construction. Errors in verification of the
constructed chain did not have the intended effect on these functions.
This commit updates the functions to check for verify_result ==
X509_V_OK, and no longer erases any accumulated match information
when chain construction fails. Sophisticated developers can, with
care, use SSL_set_verify_result(ssl, X509_V_OK) to "peek" at TLSA
info even when verification fail. They must of course first check
and save the real error, and restore the original error as quickly
as possible. Hiding by default seems to be the safer interface.
Introduced X509_V_ERR_DANE_NO_MATCH code to signal failure to find
matching TLSA records. Previously reported via X509_V_ERR_CERT_UNTRUSTED.
This also changes the "-brief" output from s_client to include
verification results and TLSA match information.
Mentioned session resumption in code example in SSL_CTX_dane_enable(3).
Also mentioned that depths returned are relative to the verified chain
which is now available via SSL_get0_verified_chain(3).
Added a few more test-cases to danetest, that exercise the new
code.
Resolved thread safety issue in use of static buffer in
X509_verify_cert_error_string().
Fixed long-stating issue in apps/s_cb.c which always sets verify_error
to either X509_V_OK or "chain to long", code elsewhere (e.g.
s_time.c), seems to expect the actual error. [ The new chain
construction code is expected to correctly generate "chain
too long" errors, so at some point we need to drop the
work-arounds, once SSL_set_verify_depth() is also fixed to
propagate the depth to X509_STORE_CTX reliably. ]
Reviewed-by: Rich Salz <rsalz@openssl.org>
Previous commit 7bb196a71 attempted to "fix" a problem with the way
SSL_shutdown() behaved whilst in mid-handshake. The original behaviour had
SSL_shutdown() return immediately having taken no action if called mid-
handshake with a return value of 1 (meaning everything was shutdown
successfully). In fact the shutdown has not been successful.
Commit 7bb196a71 changed that to send a close_notify anyway and then
return. This seems to be causing some problems for some applications so
perhaps a better (much simpler) approach is revert to the previous
behaviour (no attempt at a shutdown), but return -1 (meaning the shutdown
was not successful).
This also fixes a bug where SSL_shutdown always returns 0 when shutdown
*very* early in the handshake (i.e. we are still using SSLv23_method).
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
CRIME protection: disable compression by default, even if OpenSSL is
compiled with zlib enabled. Applications can still enable compression by
calling SSL_CTX_clear_options(ctx, SSL_OP_NO_COMPRESSION), or by using
the SSL_CONF library to configure compression. SSL_CONF continues to
work as before:
SSL_CONF_cmd(ctx, "Options", "Compression") enables compression.
SSL_CONF_cmd(ctx, "Options", "-Compression") disables compression (now
no-op by default).
The command-line switch has changed from -no_comp to -comp.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This extends the existing async functionality to SSL_shutdown(), i.e.
SSL_shutdown() can now casuse an SSL_ERROR_WANT_ASYNC error to be returned
from SSL_get_error() if async mode has been enabled.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The SSL and SSL_CTX structures are reference counted. However since libssl
was made opaque there is no way for users of the library to manipulate the
reference counts. This adds functions to enable that.
Reviewed-by: Stephen Henson <steve@openssl.org>
Calling SSL_shutdown while in init previously gave a "1" response, meaning
everything was successfully closed down (even though it wasn't). Better is
to send our close_notify, but fail when trying to receive one.
The problem with doing a shutdown while in the middle of a handshake is
that once our close_notify is sent we shouldn't really do anything else
(including process handshake/CCS messages) until we've received a
close_notify back from the peer. However the peer might send a CCS before
acting on our close_notify - so we won't be able to read it because we're
not acting on CCS messages!
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Also report an SSL_dane_enable error when the basedomain is an
invalid SNI name. Avoid side-effects when such a name is valid
with X509_VERIFY_PARAM_set1_host(), as e.g. with an empty name, by
setting the SNI name first.
Reviewed-by: Rich Salz <rsalz@openssl.org>
It turns out that -pause calls the undocumented function SSL_set_debug.
That just sets flag inside the SSL structure. That flag, despite
the command is never used. So remove the flag, the field, and the
function.
Reviewed-by: Richard Levitte <levitte@openssl.org>
These now take and return unsigned long, and get is constified.
Updated related documentation and util/ssleay.num
Reviewed-by: Matt Caswell <matt@openssl.org>
Also tweak some of the code in demos/bio, to enable interactive
testing of BIO_s_accept's use of SSL_dup. Changed the sconnect
client to authenticate the server, which now exercises the new
SSL_set1_host() function.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The protocol selection code is now consolidated in a few consecutive
short functions in a single file and is table driven. Protocol-specific
constraints that influence negotiation are moved into the flags
field of the method structure. The same protocol version constraints
are now applied in all code paths. It is now much easier to add
new protocol versions without reworking the protocol selection
logic.
In the presence of "holes" in the list of enabled client protocols
we no longer select client protocols below the hole based on a
subset of the constraints and then fail shortly after when it is
found that these don't meet the remaining constraints (suiteb, FIPS,
security level, ...). Ideally, with the new min/max controls users
will be less likely to create "holes" in the first place.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
Add #define's for the old names.
Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros.
Reviewed-by: Tim Hudson <tjh@openssl.org>
SSL_{CTX}_set_tmp_ecdh() allows to set 1 EC curve and then tries to use it. On
the other hand SSL_{CTX_}set1_curves() allows you to set a list of curves, but
only when SSL_{CTX_}set_ecdh_auto() was called to turn it on.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
This only gets used to set a specific curve without actually checking that the
peer supports it or not and can therefor result in handshake failures that can
be avoided by selecting a different cipher.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Add CRYPTO_free_ex_index (for shared libraries)
Unify and complete the documentation for all "ex_data" API's and objects.
Replace xxx_get_ex_new_index functions with a macro.
Added an exdata test.
Renamed the ex_data internal datatypes.
Reviewed-by: Matt Caswell <matt@openssl.org>
Change handshake hash array into a single digest context simplifying the
handhake hash code. Use EVP_md5_sha1() if needed for handshake hashes in
TLS 1.1 and earlier.
Simplify PRF code to also use a single digest and treat EVP_md5_sha1()
as a special case.
Modify algorithm2 field of ciphers to use a single index value for handshake
hash and PRF instead of a bitmap.
Reviewed-by: Matt Caswell <matt@openssl.org>
This patch contains the necessary changes to provide GOST 2012
ciphersuites in TLS. It requires the use of an external GOST 2012 engine.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Initial API implemented for notifying applications that an ASYNC_JOB
has completed. Currently only s_server is using this. The Dummy Async
engine "cheats" in that it notifies that it has completed *before* it
pauses the job. A normal async engine would not do that.
Only the posix version of this has been implemented so far, so it will
probably fail to compile on Windows at the moment.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Removed the function ASYNC_job_is_waiting() as it was redundant. The only
time user code has a handle on a job is when one is waiting, so all they
need to do is check whether the job is NULL. Also did some cleanups to
make sure the job really is NULL after it has been freed!
Reviewed-by: Rich Salz <rsalz@openssl.org>
The following entry points have been made async aware:
SSL_accept
SSL_read
SSL_write
Also added is a new mode - SSL_MODE_ASYNC. Calling the above functions with
the async mode enabled will initiate a new async job. If an async pause is
encountered whilst executing the job (such as for example if using SHA1/RSA
with the Dummy Async engine), then the above functions return with
SSL_WANT_ASYNC. Calling the functions again (with exactly the same args
as per non-blocking IO), will resume the job where it left off.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There are lots of calls to EVP functions from within libssl There were
various places where we should probably check the return value but don't.
This adds these checks.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The new function SSL_use_certificate_chain_file was always crashing in
the internal function use_certificate_chain_file because it would pass a
NULL value for SSL_CTX *, but use_certificate_chain_file would
unconditionally try to dereference it.
Reviewed-by: Stephen Henson <steve@openssl.org>
if we have a malloc |x = OPENSSL_malloc(...)| sometimes we check |x|
for NULL and sometimes we treat it as a boolean |if(!x) ...|. Standardise
the approach in libssl.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
The SSL object was being deref'd and then there was a later redundant check
to see if it is NULL. We assume all SSL_foo functions pass a non NULL SSL
object and do not check it.
Reviewed-by: Tim Hudson <tjh@openssl.org>
There were a few remaining references to SSLv2 support which are no longer
relevant now that it has been removed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The SSL variable |in_handshake| seems misplaced. It would be better to have
it in the STATEM structure.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The |no_cert_verify| should be in the state machine structure not in SSL
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Change various state machine functions to use the prefix ossl_statem
instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The SSL structure contained a "type" variable that was set to either
SSL_ST_ACCEPT or SSL_ST_CONNECT depending on whether we are the server or
the client. This duplicates the capability of the "server" variable and was
actually rarely used.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Clean up and remove lots of code that is now no longer needed due to the
move to the new state machine.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Split the TLS server ssl3_get_* and ssl3_send_* functions into two ready
for the migration to the new state machine code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
This is the first drop of the new state machine code.
The rewrite has the following objectives:
- Remove duplication of state code between client and server
- Remove duplication of state code between TLS and DTLS
- Simplify transitions and bring the logic together in a single location
so that it is easier to validate
- Remove duplication of code between each of the message handling functions
- Receive a message first and then work out whether that is a valid
transition - not the other way around (the other way causes lots of issues
where we are expecting one type of message next but actually get something
else)
- Separate message flow state from handshake state (in order to better
understand each)
- message flow state = when to flush buffers; handling restarts in the
event of NBIO events; handling the common flow of steps for reading a
message and the common flow of steps for writing a message etc
- handshake state = what handshake message are we working on now
- Control complexity: only the state machine can change state: keep all
the state changes local to a file
This builds on previous state machine related work:
- Surface CCS processing in the state machine
- Version negotiation rewrite
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Much related/similar work also done by
Ivan Nestlerode <ivan.nestlerode@sonos.com>
+Replace FILE BIO's with dummy ops that fail.
+Include <stdio.h> for sscanf() even with no-stdio (since the declaration
is there). We rely on sscanf() to parse the OPENSSL_ia32cap environment
variable, since it can be larger than a 'long'. And we don't rely on the
availability of strtoull().
+Remove OPENSSL_stderr(); not used.
+Make OPENSSL_showfatal() do nothing (currently without stdio there's
nothing we can do).
+Remove file-based functionality from ssl/. The function
prototypes were already gone, but not the functions themselves.
+Remove unviable conf functionality via SYS_UEFI
+Add fallback definition of BUFSIZ.
+Remove functions taking FILE * from header files.
+Add missing DECLARE_PEM_write_fp_const
+Disable X509_LOOKUP_hash_dir(). X509_LOOKUP_file() was already compiled out,
so remove its prototype.
+Use OPENSSL_showfatal() in CRYPTO_destroy_dynlockid().
+Eliminate SRP_VBASE_init() and supporting functions. Users will need to
build the verifier manually instead.
+Eliminate compiler warning for unused do_pk8pkey_fp().
+Disable TEST_ENG_OPENSSL_PKEY.
+Disable GOST engine as is uses [f]printf all over the place.
+Eliminate compiler warning for unused send_fp_chars().
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Previously you could only set both the default path and file locations
together. This adds the ability to set one without the other.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Since SSLv3, a CipherSuite is always 2 bytes. The only place where we
need 3-byte ciphers is SSLv2-compatible ClientHello processing.
So, remove the ssl_put_cipher_by_char indirection.
Reviewed-by: Rich Salz <rsalz@openssl.org>
For server use a PSK identity hint value in the CERT structure which
is inherited when SSL_new is called and which allows applications to
set hints on a per-SSL basis. The previous version of
SSL_use_psk_identity_hint tried (wrongly) to use the SSL_SESSION structure.
PR#4039
Reviewed-by: Matt Caswell <matt@openssl.org>
There are many places (nearly 50) where we malloc and then memset.
Add an OPENSSL_zalloc routine to encapsulate that.
(Missed one conversion; thanks Richard)
Also fixes GH328
Reviewed-by: Richard Levitte <levitte@openssl.org>
This was obsolete in 2001. This is not the same as Gost94 digest.
Thanks to Dmitry Belyavsky <beldmit@gmail.com> for review and advice.
Reviewed-by: Matt Caswell <matt@openssl.org>
While closing RT3588 (Remove obsolete comment) Kurt and I saw that a
few lines to completely clear the SSL cipher state could be moved into
a common function.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
The new accessors SSL_get_client_random, SSL_get_server_random and
SSL_SESSION_get_master_key should return a size_t to match the type of the
|outlen| parameter.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Change the new SSL_get_client_random(), SSL_get_server_random() and
SSL_SESSION_get_master_key() functions to use size_t for |outlen| instead of
int.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Tor uses these values to implement a low-rent clone of RFC 5705 (which,
in our defense, we came up with before RFC 5705 existed). But now that
ssl_st is opaque, we need another way to get at them.
Includes documentation, with suitable warnings about not actually
using these functions.
Signed-off-by: Nick Mathewson <nickm@torproject.org>
Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
On the server side, if you want to know which ciphers the client
offered, you had to use session->ciphers. But that field is no
longer visible, so we need a method to get at it.
Signed-off-by: Nick Mathewson <nickm@torproject.org>
Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
The certificate masks are used to select which ciphersuite we are going to
use. The variables |emask_k| and |emask_a| relate to export grade key
exchange and authentication respecitively. The variables |mask_k| and
|mask_a| are the equivalent versions for non-export grade. This fixes an
instance where the two usages of export/non-export were mixed up. In
practice it makes little difference since it still works!
Reviewed-by: Richard Levitte <levitte@openssl.org>
Given the pervasive nature of TLS extensions it is inadvisable to run
OpenSSL without support for them. It also means that maintaining
the OPENSSL_NO_TLSEXT option within the code is very invasive (and probably
not well tested). Therefore it is being removed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Move per-connection state out of the CERT structure: which should just be
for shared configuration data (e.g. certificates to use).
In particular move temporary premaster secret, raw ciphers, peer signature
algorithms and shared signature algorithms.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This commit changes the way that we do server side protocol version
negotiation. Previously we had a whole set of code that had an "up front"
state machine dedicated to the negotiating the protocol version. This adds
significant complexity to the state machine. Historically the justification
for doing this was the support of SSLv2 which works quite differently to
SSLv3+. However, we have now removed support for SSLv2 so there is little
reason to maintain this complexity.
The one slight difficulty is that, although we no longer support SSLv2, we
do still support an SSLv3+ ClientHello in an SSLv2 backward compatible
ClientHello format. This is generally only used by legacy clients. This
commit adds support within the SSLv3 code for these legacy format
ClientHellos.
Server side version negotiation now works in much the same was as DTLS,
i.e. we introduce the concept of TLS_ANY_VERSION. If s->version is set to
that then when a ClientHello is received it will work out the most
appropriate version to respond with. Also, SSLv23_method and
SSLv23_server_method have been replaced with TLS_method and
TLS_server_method respectively. The old SSLv23* names still exist as
macros pointing at the new name, although they are deprecated.
Subsequent commits will look at client side version negotiation, as well of
removal of the old s23* code.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Remove RFC2712 Kerberos support from libssl. This code and the associated
standard is no longer considered fit-for-purpose.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Since COMP_METHOD is now defined in comp_lcl.h, it is no
longer possible to create new TLS compression methods without
using the OpenSSL source. Only ZLIB is supported by default.
Also, since the types are opaque, #ifdef guards to use "char *"
instead of the real type aren't necessary.
The changes are actually minor. Adding missing copyright to some
files makes the diff misleadingly big.
Reviewed-by: Matt Caswell <matt@openssl.org>
If sk_SSL_CIPHER_new_null() returns NULL then ssl_bytes_to_cipher_list()
should also return NULL.
Based on an original patch by mrpre <mrpre@163.com>.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Just as with the OPENSSL_malloc calls, consistently use sizeof(*ptr)
for memset and memcpy. Remove needless casts for those functions.
For memset, replace alternative forms of zero with 0.
Reviewed-by: Richard Levitte <levitte@openssl.org>
For a local variable:
TYPE *p;
Allocations like this are "risky":
p = OPENSSL_malloc(sizeof(TYPE));
if the type of p changes, and the malloc call isn't updated, you
could get memory corruption. Instead do this:
p = OPENSSL_malloc(sizeof(*p));
Also fixed a few memset() calls that I noticed while doing this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
After the finale, the "real" final part. :) Do a recursive grep with
"-B1 -w [a-zA-Z0-9_]*_free" to see if any of the preceeding lines are
an "if NULL" check that can be removed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Don't check for NULL before calling free functions. This gets:
ERR_STATE_free
ENGINE_free
DSO_free
CMAC_CTX_free
COMP_CTX_free
CONF_free
NCONF_free NCONF_free_data _CONF_free_data
A sk_free use within OBJ_sigid_free
TS_TST_INFO_free (rest of TS_ API was okay)
Doc update for UI_free (all uses were fine)
X509V3_conf_free
X509V3_section_free
X509V3_string_free
Reviewed-by: Richard Levitte <levitte@openssl.org>
Don't check for NULL before calling a free routine. This gets X509_.*free:
x509_name_ex_free X509_policy_tree_free X509_VERIFY_PARAM_free
X509_STORE_free X509_STORE_CTX_free X509_PKEY_free
X509_OBJECT_free_contents X509_LOOKUP_free X509_INFO_free
Reviewed-by: Richard Levitte <levitte@openssl.org>
