In <= TLSv1.2 a Finished message always comes immediately after a CCS
except in the case of NPN where there is an additional message between
the CCS and Finished. Historically we always calculated the Finished MAC
when we processed the CCS. However to deal with NPN we also calculated it
when we receive the Finished message. Really this should only have been
done if we hand negotiated NPN.
This simplifies the code to only calculate the MAC when we receive the
Finished. In 1.1.1 we need to do it this way anyway because there is no
CCS (except in middlebox compat mode) in TLSv1.3.
Coincidentally, this commit also fixes the fact that no-nextprotoneg does
not currently work in master.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5285)
Add SSL_verify_client_post_handshake() for servers to initiate PHA
Add SSL_force_post_handshake_auth() for clients that don't have certificates
initially configured, but use a certificate callback.
Update SSL_CTX_set_verify()/SSL_set_verify() mode:
* Add SSL_VERIFY_POST_HANDSHAKE to postpone client authentication until after
the initial handshake.
* Update SSL_VERIFY_CLIENT_ONCE now only sends out one CertRequest regardless
of when the certificate authentication takes place; either initial handshake,
re-negotiation, or post-handshake authentication.
Add 'RequestPostHandshake' and 'RequirePostHandshake' SSL_CONF options that
add the SSL_VERIFY_POST_HANDSHAKE to the 'Request' and 'Require' options
Add support to s_client:
* Enabled automatically when cert is configured
* Can be forced enabled via -force_pha
Add support to s_server:
* Use 'c' to invoke PHA in s_server
* Remove some dead code
Update documentation
Update unit tests:
* Illegal use of PHA extension
* TLSv1.3 certificate tests
DTLS and TLS behave ever-so-slightly differently. So, when DTLS1.3 is
implemented, it's PHA support state machine may need to be different.
Add a TODO and a #error
Update handshake context to deal with PHA.
The handshake context for TLSv1.3 post-handshake auth is up through the
ClientFinish message, plus the CertificateRequest message. Subsequent
Certificate, CertificateVerify, and Finish messages are based on this
handshake context (not the Certificate message per se, but it's included
after the hash). KeyUpdate, NewSessionTicket, and prior Certificate
Request messages are not included in post-handshake authentication.
After the ClientFinished message is processed, save off the digest state
for future post-handshake authentication. When post-handshake auth occurs,
copy over the saved handshake context into the "main" handshake digest.
This effectively discards the any KeyUpdate or NewSessionTicket messages
and any prior post-handshake authentication.
This, of course, assumes that the ID-22 did not mean to include any
previous post-handshake authentication into the new handshake transcript.
This is implied by section 4.4.1 that lists messages only up to the
first ClientFinished.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4964)
The new extension is like signature_algorithms, but only for the
signature *on* the certificate we will present to the peer (the
old signature_algorithms extension is still used for signatures that
we *generate*, i.e., those over TLS data structures).
We do not need to generate this extension, since we are the same
implementation as our X.509 stack and can handle the same types
of signatures, but we need to be prepared to receive it, and use the received
information when selecting what certificate to present.
There is a lot of interplay between signature_algorithms_cert and
signature_algorithms, since both affect what certificate we can
use, and thus the resulting signature algorithm used for TLS messages.
So, apply signature_algorithms_cert (if present) as a filter on what
certificates we can consider when choosing a certificate+sigalg
pair.
As part of this addition, we also remove the fallback code that let
keys of type EVP_PKEY_RSA be used to generate RSA-PSS signatures -- the
new rsa_pss_pss_* and rsa_pss_rsae_* signature schemes have pulled
the key type into what is covered by the signature algorithm, so
we should not apply this sort of compatibility workaround.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5068)
This just adds the various extension functions. More changes will be
required to actually use them.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4435)
We'd like the first bit of early_data and the ClientHello to go in the
same TCP packet if at all possible to enable things like TCP Fast Open.
Also, if you're only going to send one block of early data then you also
don't need to worry about TCP_NODELAY.
Fixes#4783
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4802)
The new ServerHello format is essentially now the same as the old TLSv1.2
one, but it must additionally include supported_versions. The version
field is fixed at TLSv1.2, and the version negotiation happens solely via
supported_versions.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4701)
Instead of storing supported groups in on-the-wire format store
them as parsed uint16_t values. This simplifies handling of groups
as the values can be directly used instead of being converted.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4406)
We already did this on an ad-hoc per extension basis (for some extensions).
This centralises it and makes sure we do it for all extensions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3418)
The TLSv1.3 spec says that a server SHOULD send supported_groups in the
EE message if there is a group that it prefers to the one used in the
key_share. Clients MAY act on that. At the moment we don't do anything
with it on the client side, but that may change in the future.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3395)
Previously, init and finalization function for extensions are called
per extension block, rather than per message. This commit changes
that behaviour, and now they are called per message. The parse
function is still called per extension block.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3244)
The old custom extensions API was not TLSv1.3 aware. Extensions are used
extensively in TLSv1.3 and they can appear in many different types of
messages. Therefore we need a new API to be able to cope with that.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3139)
This move prepares for the later addition of the new custom extensions
API. The context codes have an additional "SSL_" added to their name to
ensure we don't have name clashes with other applications.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3139)
Draft-19 changes the HRR transcript hash so that the initial ClientHello
is replaced in the transcript with a special synthetic message_hash message
that just contains a hash of ClientHello1 as its message body.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)
The end of early data is now indicated by a new handshake message rather
than an alert.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)
We do not allow the generation of TLSv1.3 cookies. But if we receive one
in an HRR we will echo it back in the ClientHello.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2839)
We also skip any early_data that subsequently gets sent. Later commits will
process it if we can.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)
Modify the API of tls_collect_extensions() to be able to output the number of
extensions that are known (i.e., the length of its 'res' output). This number
can never be zero on a successful return due to the builtin extensions list,
but use a separate output variable so as to not overload the return value
semantics.
Having this value easily available will give consumers a way to avoid repeating
the calculation.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Requires a refactor of the ServerHello parsing, so that we parse first and
then subsequently process. This is because the resumption information is
held in the extensions block which is parsed last - but we need to know that
information earlier.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
The record layer was making decisions that should really be left to the
state machine around unexpected handshake messages that are received after
the initial handshake (i.e. renegotiation related messages). This commit
removes that code from the record layer and updates the state machine
accordingly. This simplifies the state machine and paves the way for
handling other messages post-handshake such as the NewSessionTicket in
TLSv1.3.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
This variable represents the index of the cert within the chain, so give it
a name that better represents that.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
