The CA names should be printed according to user's decision
print_name instead of set of BIO_printf
dump_cert_text instead of set of BIO_printf
Testing cyrillic output of X509_CRL_print_ex
Write and use X509_CRL_print_ex
Reduce usage of X509_NAME_online
Using X509_REQ_print_ex instead of X509_REQ_print
Fix nameopt processing.
Make dump_cert_text nameopt-friendly
Move nameopt getter/setter to apps/apps.c
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3262)
In SCTP the code was only allowing a send of a close_notify alert if the
socket is dry. If the socket isn't dry then it was attempting to save away
the close_notify alert to resend later when it is dry and then it returned
success. However because the application then thinks that the close_notify
alert has been successfully sent it never re-enters the DTLS code to
actually resend the alert. A much simpler solution is to just fail with a
retryable error in the event that the socket isn't dry. That way the
application knows to retry sending the close_notify alert.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3286)
In order to use SCTP over DTLS we need ACTP AUTH chunks to be enabled in
the kernel.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3286)
The existing BIO_lookup() wraps a call to getaddrinfo and provides an
abstracted capability to lookup addresses based on socket type and family.
However it provides no ability to lookup based on protocol. Normally,
when dealing with TCP/UDP this is not required. However getaddrinfo (at
least on linux) never returns SCTP addresses unless you specifically ask
for them in the protocol field. Therefore BIO_lookup_ex() is added which
provides the protocol field.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3286)
EV Guidelines section 9.2.5 says jurisdictionCountryName follows the
same ASN.1 encoding rules as countryName.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3284)
BN_is_prime_fasttest_ex begins by rejecting if a <= 1. Then it goes to
set A := abs(a), but a cannot be negative at this point.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3275)
Modified code from http://seed.kisa.or.kr to human readable code.
Previous 8-bit code is available with -DOPENSSL_SMALL_FOOTPRINT.
New code is >2x faster.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3242)
Previously, BN_is_prime_fasttest_ex, when doing trial-division, would
check whether the candidate is a multiple of a number of small primes
and, if so, reject it. However, three is a multiple of three yet is
still a prime number.
This change accepts small primes as prime when doing trial-division.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3264)
X509_STORE_add_cert and X509_STORE_add_crl are changed to return
success if the object to be added was already found in the store, rather
than returning an error.
Raise errors if empty or malformed files are read when loading certificates
and CRLs.
Remove NULL checks and allow a segv to occur.
Add error handing for all calls to X509_STORE_add_c{ert|tl}
Refactor these two routines into one.
Bring the unit test for duplicate certificates up to date using the test
framework.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2830)
Because many of our test programs use internal headers, we need to make
sure they know how, exactly, to mangle the symbols. So far, we've done
so by specifying it in the affected test programs, but as things change,
that will develop into a goose chase. Better then to declare once and
for all how symbols belonging in our libraries are meant to be treated,
internally as well as publically.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3259)
Trouble was that integer negation wasn't producing *formally* correct
result in platform-neutral sense. Formally correct thing to do is
-(int64_t)u, but this triggers undefined behaviour for one value that
would still be representable in ASN.1. The trigger was masked with
(int64_t)(0-u), but this is formally inappropriate for values other
than the problematic one. [Also reorder branches to favour most-likely
paths and harmonize asn1_string_set_int64 with asn1_get_int64].]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3231)
i.e. reduce amount of branches and favour likely ones.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3192)
Also, when "allocating" or "deallocating" an embedded item, never call
prim_new() or prim_free(). Call prim_clear() instead.
Fixes#3191
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3199)
RT3877: Add X509 OCSP error codes and messages
Add additional OCSP error codes for X509 verify usage
RT3867: Support Multiple CA certs in ocsp app
Add the ability to read multiple CA certs from a single file in the
ocsp app.
Update some missing X509 errors in documentation.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/941)
fixes segmentation fault in case of not enough memory for object creation
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3157)
Clearing a misunderstanding. The routines c2i_uint64_int() and
i2c_uint64_int() expect to receive that internal values are absolute
and with a separate sign flag, and the x_int64.c code handles values
that aren't absolute and have the sign bit embedded. We therefore
need to convert between absolute and non-absolute values for the
encoding of negative values to be correct.
[extended tests]
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3160)
Replace all remaining uses of LONG and ZLONG with INT32 / ZINT32.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3126)
Don't compile code that still uses LONG when it's deprecated
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3126)
When configured no-engine, we still refered to rand_engine_lock.
Rework the lock init code to avoid that.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3145)
This is especially harmful since OPENSSL_cleanup() has already called
the RAND cleanup function
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3137)
If no default method was yet given, RAND_get_rand_method() will set it
up. Doing so just to clean it away seems pretty silly, so instead,
use the default_RAND_meth variable directly.
This also clears a possible race condition where this will try to init
things, such as ERR or ENGINE when in the middle of a OPENSSL_cleanup.
Fixes#3128
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3136)
This commit contains some optimizations in PKCS5_PBKDF2_HMAC() and
HMAC_CTX_copy() functions which together makes PBKDF2 computations
faster by 15-40% according to my measurements made on x64 Linux with
both asm optimized and no-asm versions of SHA1, SHA256 and SHA512.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1708)
Credit to OSS-Fuzz for finding this.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3088)
It seems to be problematic to probe processor capabilities with SIGILL
on MacOS X. The problem should be limited to cases when application code
is debugged, but crashes were reported even during normal execution...
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Originally there was dependency on BN configuration parameters, but
it stemmed from times when "long long" support was optional. Today
we require 64-bit support from compiler, and there is no reason to
have "greatest-width integer" depend on BN configuration.
Reviewed-by: Richard Levitte <levitte@openssl.org>
'j' is specified as modifier for "greatest-width integer type", which in
practice means 64 bits on both 32- and 64-bit platforms. Since we rely
on __attribute__((__format__(__printf__,...))) to sanitize BIO_print
format, we can use it to denote [u]int64_t-s in platform-neutral manner.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3083)
