Commit aea145e removed some error codes that are generated
algorithmically: mapping alerts to error texts. Found by
Andreas Karlsson. This restores them, and adds two missing ones.
Reviewed-by: Matt Caswell <matt@openssl.org>
Function-like macros are replaced with prototypes and a note
that they are implemented as macros. Constants are just
referenced in-line in the text.
Tweak BIO_TYPE_... documentation.
Also fix RT4592.
Reviewed-by: Matt Caswell <matt@openssl.org>
If application uses any of Windows-specific interfaces, make it
application developer's respondibility to include <windows.h>.
Rationale is that <windows.h> is quite "toxic" and is sensitive
to inclusion order (most notably in relation to <winsock2.h>).
It's only natural to give complete control to the application developer.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The previous commit fixed a problem where fragmented alerts would cause an
infinite loop. This commit adds a test for these fragmented alerts.
Reviewed-by: Andy Polyakov <appro@openssl.org>
with "make install -j8" it happens very often that two or more make
instances are creating the same directory in parallel. As a result one
instace creates the directory and second mkdir fails because the
directory exists already (but it did not while testing for it earlier).
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1204)
Add missing entries to NAME section
Add SYNOPSIS lines, remove old NAME entries
Update find-doc-nits; better regexp's for parsing SYNOPSIS sections.
Rename a couple of files to have an API name.
Remove RSA_private_decrypt; it was duplicate content
Update for recent doc additions
Reviewed-by: Matt Caswell <matt@openssl.org>
Before the addition of this function, it was impossible to read the
symmetric key from an EVP_PKEY_HMAC type EVP_PKEY.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1217)
On some platforms we can't startup the TLSProxy due to environmental
problems (e.g. network set up on the build machine). These aren't OpenSSL
problems so we shouldn't treat them as test failures. Just visibly
indicate that we are skipping the test.
We only skip the first time we attempt to start up the proxy. If that works
then everything else should do...if not we should probably investigate and
so report as a failure.
This also removes test_networking...there is a danger that this turns into
a test of user's environmental set up rather than OpenSSL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make d2i_X509 a generic d2i/i2d manpage.
Pull common stuff out of other d2i/i2d docs.
Update find-doc-nits to know about "generic" manpages.
Cleanup some overlap.
Fix up a bunch of other references.
Reviewed-by: Matt Caswell <matt@openssl.org>
The asdf.pod filename must have asdf in its NAME section.
also check for names existing as a different filename (via Levitte)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Also tweaks to find-doc-nits, including name/synopsis checking.
Ironically, it also reports on duplicated doc names :)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove some unused files.
Rename doc-nit-check to be consistent.
Add check for multiple #include in synopsis.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add copyright to missing assembler files.
Add copyrights to missing test/* files.
Add copyrights
Various source and misc files.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Trying to use normal perl conditions to conditionally 'use' a perl
module didn't quite work. Using the 'if' module to do so does work.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1079)
As it turns out default glob's behaviour for quoted argument varies
from version to version, making it impossible to Configure or run
tests in some cases. The reason for quoting globs was to accommodate
source path with spaces in its name, which was treated by default glob
as multiple paths. File::Glob::glob on the other hand doesn't consider
spaces as delimiters and therefore works with unquoted patterns.
[Unfortunaltely File::Glob::glob, being too csh-ly, doesn't work
on VMS, hence the "pinning" is conditional.]
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix some code examples, trailing whitespace
Fix TBA sections in verify, remove others.
Remove empty sections
Use Mixed Case not ALL CAPS in head2
Enhance doc-nits script.
Remove extra =cut line
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rename sk_xxx to OPENSSL_sk_xxx and _STACK to OPENSSL_STACK
Rename lh_xxx API to OPENSSL_LH_xxx and LHASH_NODE to OPENSSL_LH_NODE
Make lhash stuff opaque.
Use typedefs for function pointers; makes the code simpler.
Remove CHECKED_xxx macros.
Add documentation; remove old X509-oriented doc.
Add API-compat names for entire old API
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Add doc-nit-check to help find future issues.
Make podchecker be almost clean.
Remove trailing whitespace.
Tab expansion
Reviewed-by: Richard Levitte <levitte@openssl.org>
- Adjust mkerr.pl to produce the line length we used for source
reformating.
- Have mkerr.pl keep track of preprocessor directive indentation
Among others, do not spuriously throw away a #endif at the end of
header files.
- Make sure mkerr.pl specifies any header inclusion correctly
Reviewed-by: Rich Salz <rsalz@openssl.org>
Workaround an apparent IO:Socket::IP bug where a seemingly valid
server socket is being returned even though a valid connection does not
exist. This causes the tests to intermittently hang. We additionally check
that the peerport looks ok to verify that the returned socket looks usable.
Reviewed-by: Richard Levitte <levitte@openssl.org>
OpenSSL 1.1.0-pre5 has made some additional structs opaque. Python's ssl
module requires access to some of the struct members. Three new getters
are added:
int X509_OBJECT_get_type(X509_OBJECT *a);
STACK_OF(X509_OBJECT) *X509_STORE_get0_objects(X509_STORE *v);
X509_VERIFY_PARAM *X509_STORE_get0_param(X509_STORE *ctx);
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add X509_STORE_{set,get}_ex_data() function and
X509_STORE_get_ex_new_index() macro.
X509_STORE has ex_data and the documentation also mentions them but they
are not actually implemented.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The no-dsa option was failing on Windows because some symbols were not
correctly flagged in libcrypto.num. Problem found due to the new symbol
consistency test.
Reviewed-by: Richard Levitte <levitte@openssl.org>
no-cmac was failing on Windows/VMS due to libcrypto.num not marking the
CMAC functions properly. Found due to the new symbol consistency test.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Link errors were occurring on Windows because the header files were not
correctly guarding some functions with OPENSSL_NO_SOCK
Reviewed-by: Rich Salz <rsalz@openssl.org>
Link errors were occurring on Windows because the header files were not
correctly guarding some functions with OPENSSL_NO_DGRAM
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add copyright to most .pl files
This does NOT cover any .pl file that has other copyright in it.
Most of those are Andy's but some are public domain.
Fix typo's in some existing files.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make OBJ_name_cmp internal
Rename idea_xxx to IDEA_xxx
Rename get_rfc_xxx to BN_get_rfc_xxx
Rename v3_addr and v3_asid functions to X509v3_...
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make X509_OBJECT, X509_STORE_CTX, X509_STORE, X509_LOOKUP,
and X509_LOOKUP_METHOD opaque.
Remove unused X509_CERT_FILE_CTX
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
There is a preference for suffixes to indicate that a function is internal
rather than prefixes. Note: the suffix is only required to disambiguate
internal functions and public symbols with the same name (but different
case)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
libssl needs to have access to some internal libcrypto symbols.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add an accessor for SSL_CTX.
Since libssl was made opaque, there is no way for users to access the
cipher_list, while users can set the cipher_list by
SSL_CTX_set_cipher_list().
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Numerous fixups based on feedback of the DSA opacity changes.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
BIO_f_linebuffer() is now built by default instead of just on VMS, but
the prototype in the header was still only available on VMS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Instead of have every DSO_METHOD_xxx in all platforms, ensure that only
one DSO_METHOD_openssl is available on all platforms.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The mk1mf build for the VC-WIN* targets is broken and the unified
scheme works well enough, so we clean out the old.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Don't have #error statements in header files, but instead wrap
the contents of that file in #ifndef OPENSSL_NO_xxx
This means it is now always safe to include the header file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
mkdef.pl was not detecting no-comp functions. This updates the header file
so that mkdef.pl detects that no-comp applies, and the functions are marked
accordingly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
In most builds, we can assume that engines live in the build tree
subdirectory "engines". This was hard coded into the tests that use
the engine ossltest.
However, that hard coding is tedious, it would need to be done in
every test recipe, and it's an incorrect assumption in some cases.
This change has us play it safe and let the build files tell the
testing framework where the engines are.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
TLSProxy starts s_server and specifies the number of client connects
it should expect. After that s_server is supposed to close down
automatically. However, if another test is then run then TLSProxy
will start a new instance of s_server. If the previous instance
hasn't closed down yet then the new instance can fail to bind to
the socket.
Reviewed-by: Richard Levitte <levitte@openssl.org>
no-ripemd was unified a while ago but the change was not done in mk1mf.pl. This commit changes the no-ripemd string to no-rmd160 which fixes the no-rmd160 classic build.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove 'log' field from SCT and related accessors
In order to still have access to an SCT's CTLOG when calling SCT_print,
SSL_CTX_get0_ctlog_store has been added.
Improved documentation for some CT functions in openssl/ssl.h.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Both of these functions can easily be implemented by callers instead.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
If there is cause to think LD_LIBRARY_PATH_32 and LD_PRELOAD_32 are
appropriate variables to touch, do so. Otherwise, touch the usual
LD_LIBRARY_PATH and LD_PRELOAD. This covers for older installations
that don't have a mix of 32-bit and 64-bit libs.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This is similar to SSL_pending() but just returns a 1 if there is data
pending in the internal OpenSSL buffers or 0 otherwise (as opposed to
SSL_pending() which returns the number of bytes available). Unlike
SSL_pending() this will work even if "read_ahead" is set (which is the
case if you are using read pipelining, or if you are doing DTLS). A 1
return value means that we have unprocessed data. It does *not* necessarily
indicate that there will be application data returned from a call to
SSL_read(). The unprocessed data may not be application data or there
could be errors when we attempt to parse the records.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
This capability is required for read pipelining. We will only read in as
many records as will fit in the read buffer (and the network can provide
in one go). The bigger the buffer the more records we can process in
parallel.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
We had the function EVP_CIPHER_CTX_cipher_data which is newly added for
1.1.0. As we now also need an EVP_CIPHER_CTX_set_cipher_data it makes
more sense for the former to be called EVP_CIPHER_CTX_get_cipher_data.
Reviewed-by: Tim Hudson <tjh@openssl.org>
This is similar to SSL_pending() but just returns a 1 if there is data
pending in the internal OpenSSL buffers or 0 otherwise (as opposed to
SSL_pending() which returns the number of bytes available). Unlike
SSL_pending() this will work even if "read_ahead" is set (which is the
case if you are using read pipelining, or if you are doing DTLS). A 1
return value means that we have unprocessed data. It does *not* necessarily
indicate that there will be application data returned from a call to
SSL_read(). The unprocessed data may not be application data or there
could be errors when we attempt to parse the records.
Reviewed-by: Tim Hudson <tjh@openssl.org>
This capability is required for read pipelining. We will only read in as
many records as will fit in the read buffer (and the network can provide
in one go). The bigger the buffer the more records we can process in
parallel.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Implement aes128-cbc as a pipeline capable cipher in the dasync engine.
As dasync is just a dummy engine, it actually just performs the parallel
encrypts/decrypts in serial.
Reviewed-by: Tim Hudson <tjh@openssl.org>
