Disabled by default, but can be enabled by setting the
ct_validation_callback on a SSL or SSL_CTX.
Reviewed-by: Ben Laurie <ben@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
This patch provides getters for default_passwd_cb and userdata for SSL
and SSL_CTX. The getter functions are required to port Python's ssl module
to OpenSSL 1.1.0.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Specifies a callback that will, in the future, be used by the SSL code to
decide whether to abort a connection on Certificate Transparency grounds.
Reviewed-by: Ben Laurie <ben@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Implementation experience has shown that the original plan for async wait
fds was too simplistic. Originally the async logic created a pipe internally
and user/engine code could then get access to it via API calls. It is more
flexible if the engine is able to create its own fd and provide it to the
async code.
Another issue is that there can be a lot of churn in the fd value within
the context of (say) a single SSL connection leading to continually adding
and removing fds from (say) epoll. It is better if we can provide some
stability of the fd value across a whole SSL connection. This is
problematic because an engine has no concept of an SSL connection.
This commit refactors things to introduce an ASYNC_WAIT_CTX which acts as a
proxy for an SSL connection down at the engine layer.
Reviewed-by: Richard Levitte <levitte@openssl.org>
VisualStudio 2015 has a bug where an internal compiler error was occurring.
By reordering the DEFINE_STACK_OF declarations for SSL_CIPHER and SSL_COMP
until after the ssl3.h include everything seems ok again.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
mkdef.pl was issuing the following error:
Use of uninitialized value within %tag in numeric eq (==) at
util/mkdef.pl line 560, <IN> line 92
This was because it was treating a __cplusplus "#ifdef" check as a "tag"
but then skipping over the corresponding "#endif". Therefore after
processing a file it still had "left over" tags from processing the
previous file. It was also getting confused by "#if" checks that didn't
match is pre-defined styles.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The SRP user database lookup method SRP_VBASE_get_by_user had confusing
memory management semantics; the returned pointer was sometimes newly
allocated, and sometimes owned by the callee. The calling code has no
way of distinguishing these two cases.
Specifically, SRP servers that configure a secret seed to hide valid
login information are vulnerable to a memory leak: an attacker
connecting with an invalid username can cause a memory leak of around
300 bytes per connection.
Servers that do not configure SRP, or configure SRP but do not configure
a seed are not vulnerable.
In Apache, the seed directive is known as SSLSRPUnknownUserSeed.
To mitigate the memory leak, the seed handling in SRP_VBASE_get_by_user
is now disabled even if the user has configured a seed.
Applications are advised to migrate to SRP_VBASE_get1_by_user. However,
note that OpenSSL makes no strong guarantees about the
indistinguishability of valid and invalid logins. In particular,
computations are currently not carried out in constant time.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Because we're requiring Perl 5.10.0 and the 'parent' didn't appear
before Perl 5.10.1, we need to resort to the older parent module
declaration style, modifying @ISA.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Until now, the engines in engines/ were only built as dynamicaly
loadable ones if shared libraries were built.
We not dissociate the two and can build dynamicaly loadable engines
even if we only build static libcrypto and libssl. This is controlled
with the option (enable|disable|no)-static-engine, defaulting to
no-static-engine.
Note that the engines in crypto/engine/ (dynamic and cryptodev) will
always be built into libcrypto.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This takes us away from the idea that we know exactly how our static
libraries are going to get used. Instead, we make them available to
build shareable things with, be it other shared libraries or DSOs.
On the other hand, we also have greater control of when the shared
library cflags. They will never be used with object files meant got
binaries, such as apps/openssl or test/test*.
With unified, we take this a bit further and prepare for having to
deal with extra cflags specifically to be used with DSOs (dynamic
engines), libraries and binaries (applications).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Adapted from BoringSSL. Added a test.
The extension parsing code is already attempting to already handle this for
some individual extensions, but it is doing so inconsistently. Duplicate
efforts in individual extension parsing will be cleaned up in a follow-up.
Reviewed-by: Stephen Henson <steve@openssl.org>
All those flags existed because we had all the dependencies versioned
in the repository, and wanted to have it be consistent, no matter what
the local configuration was. Now that the dependencies are gone from
the versioned Makefile.ins, it makes much more sense to use the exact
same flags as when compiling the object files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add -DBIO_DEBUG to --strict-warnings.
Remove comments about outdated debugging ifdef guards.
Remove md_rand ifdef guarding an assert; it doesn't seem used.
Remove the conf guards in conf_api since we use OPENSSL_assert, not assert.
For pkcs12 stuff put OPENSSL_ in front of the macro name.
Merge TLS_DEBUG into SSL_DEBUG.
Various things just turned on/off asserts, mainly for checking non-NULL
arguments, which is now removed: camellia, bn_ctx, crypto/modes.
Remove some old debug code, that basically just printed things to stderr:
DEBUG_PRINT_UNKNOWN_CIPHERSUITES, DEBUG_ZLIB, OPENSSL_RI_DEBUG,
RL_DEBUG, RSA_DEBUG, SCRYPT_DEBUG.
Remove OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
mk1mf was wondering about the options no-heartbeats and
no-crypto-mdebug-backtrace, so we add option hooks them. They only
need to become OPENSSL_NO_ macros in opensslconf.h, so nothing
additional needs to be done.
Also, add "-DOPENSSL_PIC" when shared libraries are produced.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Three header files from crypto/include/internal were used by
util/mkdef.pl. This should never be needed. Some test program used
these, which made it a valid reason at the time to make the some
internal symbols public in the shared libraries, but that's not the
case any more.
However, to be able to link libssl.so, some symbols found in
include/internal headers still need to be made public.
Reviewed-by: Andy Polyakov <appro@openssl.org>
While IO::Socket::IP is a core perl module (since Perl v5.19.8, or so
says corelist), IO::Socket::INET6 has been around longer, is said to
be more widely deployed, and most importantly, seems to have less bugs
hitting us. We therefore prefer IO::Socket::INET6, and only fall back
to IO::Socket::IP if the former doesn't exist on the local system.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
INSTALL_PREFIX is a confusing name, as there's also --prefix.
Instead, tag along with the rest of the open source world and adopt
the Makefile variable DESTDIR to designate the desired staging
directory.
The Configure option --install_prefix is removed, the only way to
designate a staging directory is with the Makefile variable (this is
also implemented for VMS' descrip.mms et al).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Once upon a time, there was chop, which somply chopped off the last
character of $_ or a given variable, and it was used to take off the
EOL character (\n) of strings.
... but then, you had to check for the presence of such character.
So came chomp, the better chop which checks for \n before chopping it
off. And this worked well, as long as Perl made internally sure that
all EOLs were converted to \n.
These days, though, there seems to be a mixture of perls, so lines
from files in the "wrong" environment might have \r\n as EOL, or just
\r (Mac OS, unless I'm misinformed).
So it's time we went for the more generic variant and use s|\R$||, the
better chomp which recognises all kinds of known EOLs and chops them
off.
A few chops were left alone, as they are use as surgical tools to
remove one last slash or one last comma.
NOTE: \R came with perl 5.10.0. It means that from now on, our
scripts will fail with any older version.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Trouble is that LINK variable assignment in make-file interferes with
LINK environment variable, which can be used to modify Microsoft's
LINK.EXE behaviour.
RT#4289
Reviewed-by: Richard Levitte <levitte@openssl.org>
With this, Cygwin and Mingw builds stand a much better chance to be
able to build outside of the source tree with the unified build.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The old building scripts get removed, they are hopelessly gone in bit
rot by now.
Also remove the old symbol hacks. They were needed needed to shorten
some names to 31 characters, and to resolve other symbol clashes.
Because we now compile with /NAMES=(AS_IS,SHORTENED), this is no
longer required.
Reviewed-by: Rich Salz <rsalz@openssl.org>
As part of this, change util/mkdef.pl to stop adding libraries to
depend on in its output. mkdef.pl should ONLY output a symbol
vector.
Because symbol names can't be longer than 31 characters, we use the
compiler to shorten those that are longer down to 23 characters plus
an 8 character CRC. To make sure users of our header files will pick
up on that automatically, add the DEC C supported extra headers files
__decc_include_prologue.h and __decc_include_epilogue.h.
Furthermore, we add a config.com, so VMS people can configure just as
comfortably as any Unix folks, thusly:
@config
Reviewed-by: Rich Salz <rsalz@openssl.org>
Under certain conditions, one might not want to output certain
sections of a template file. This adds the functions output_off() and
output_on(), reachable inside the templates. And example usage in a
Makefile template could be this:
@ : {- output_off() if $config{no_shared}; "" -}
... lines dealing with shared libraries
@ : {- output_on() -}
Reviewed-by: Rich Salz <rsalz@openssl.org>
This option disables automatic loading of the crypto/ssl error strings in
order to keep statically linked executable file size down
Reviewed-by: Richard Levitte <levitte@openssl.org>
This commit provides the basis and core code for an auto initialisation
and deinitialisation framework for libcrypto and libssl. The intention is
to remove the need (in many circumstances) to call explicit initialise and
deinitialise functions. Explicit initialisation will still be an option,
and if non-default initialisation is needed then it will be required.
Similarly for de-initialisation (although this will be a lot easier since
it will bring all de-initialisation into a single function).
Reviewed-by: Richard Levitte <levitte@openssl.org>
util/mkdef.pl and Makefile.shared needs to know about the source and
the build directories.
Additionally, Makefile.shared needs to know how to build shared
libraries in a directory other than the current one.
Reviewed-by: Ben Laurie <ben@openssl.org>
This works on Linux with Make already, and allows running only specified
tests.
Reviewed-by: Ben Laurie <ben@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The DTLSv1_listen function exposed details of the underlying BIO
abstraction and did not properly allow for IPv6. This commit changes the
"peer" argument to be a BIO_ADDR and makes it a first class function
(rather than a ctrl) to ensure proper type checking.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add no-async option to Configure that forces ASYNC_NULL.
Related to RT1979
An embedded system or replacement C library (e.g. musl or uClibc)
may not support the *context APIs that are needed for async operation.
Compiles with musl. Ran unit tests, async tests skipped as expected.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
When connecting to "localhost" the Proxy's choice of client address
family may not match the server's choice address family. Without
MultiHomed => 1, the proxy may try the wrong address family first,
and give up without trying the other.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This makes use of TLSProxy, which was expanded to use IO::Socket::IP
(which is a core perl module) or IO::Socket::INET6 (which is said to
be more popular) instead IO::Socket::INET if one of them is installed.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
CRIME protection: disable compression by default, even if OpenSSL is
compiled with zlib enabled. Applications can still enable compression by
calling SSL_CTX_clear_options(ctx, SSL_OP_NO_COMPRESSION), or by using
the SSL_CONF library to configure compression. SSL_CONF continues to
work as before:
SSL_CONF_cmd(ctx, "Options", "Compression") enables compression.
SSL_CONF_cmd(ctx, "Options", "-Compression") disables compression (now
no-op by default).
The command-line switch has changed from -no_comp to -comp.
Reviewed-by: Rich Salz <rsalz@openssl.org>
New functions to return internal pointer for order and cofactor. This
avoids the need to allocate a new BIGNUM which to copy the value to.
Simplify code to use new functions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Remove depend hacks from demos/engines.
Remove clean-depend; just call makedepend (or $CC -M) and use that.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The SSL and SSL_CTX structures are reference counted. However since libssl
was made opaque there is no way for users of the library to manipulate the
reference counts. This adds functions to enable that.
Reviewed-by: Stephen Henson <steve@openssl.org>
Now that we're using templates, we should warn people not to edit the
resulting file. We do it through util/dofile.pl, which is enhanced
with an option to tell what file it was called from. We also change
the calls so the template files are on the command line instead of
being redirected through standard input. That way, we can display
something like this (example taken from include/openssl/opensslconf.h):
/* WARNING: do not edit! */
/* Generated by Configure from include/openssl/opensslconf.h.in */
Reviewed-by: Rich Salz <rsalz@openssl.org>
It is time for Makefile.org to fold into the new regime and have a run
through util/dofile.pl. This forces some information out of there and
into Configure, which isn't a bad thing, it makes Configure
increasingly the center of build information, which is as it should
be.
A few extra defaults were needed in the BASE template to get rid of
warnings about missing values.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
This is an internal facility, never documented, not for
public consumption. Move it into ssl (where it's only used
for DTLS).
I also made the typedef's for pqueue and pitem follow our style: they
name structures, not pointers.
Reviewed-by: Richard Levitte <levitte@openssl.org>
For this adaptation, the variables $options and $version needed to
move to %config in Configure, and why not move all other variables
holding diverse version numbers at the same time?
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
For our own convenience, we need a mechanism to be able to fall back
on bundled Perl modules. It's a minimal package that's called like
this:
use with_fallback qw(Module1 Module2 ...);
For each module, it will try to require them from the system
installation, and failing that, it will temporarly add external/perl
and try to require transfer::{ModuleName}. It requires that each
bundled Perl modules is accompanied by a small transfer module
(external/perl/transfer/ModuleName.pm in our example) that knows
exactly what to load.
Reviewed-by: Rich Salz <rsalz@openssl.org>
apps/CA.pl and tools/c_rehash are built from template files. So far,
this was done by Configure, which created its own problems as it
forced everyone to reconfigure just because one of the template files
had changed.
Instead, have those files created as part of the normal build in apps/
and in tools/.
Furthermore, this prepares for a future where Configure may produce
entirely other build files than Makefile, and the latter can't be
guaranteed to be the holder of all information for other scripts.
Instead, configdata.pm (described below) becomes the center of
configuration information.
This introduces a few new things:
%config a hash table to hold all kinds of configuration data
that can be used by any other script.
configdata.pm a perl module that Configure writes. It currently
holds the hash tables %config and %target.
util/dofile.pl a script that takes a template on STDIN and outputs
the result after applying configuration data on it.
It's supposed to be called like this:
perl -I$(TOP) -Mconfigdata < template > result
or
perl -I$(TOP) -Mconfigdata templ1 templ2 ... > result
Note: util/dofile.pl requires Text::Template.
As part of this changed, remove a number of variables that are really
just copies of entries in %target, and use %target directly. The
exceptions are $target{cflags} and $target{lflags}, they do get copied
to $cflags and $lflags. The reason for this is that those variable
potentially go through a lot of changes and would rather deserve a
place in %config. That, however, is for another commit.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
--prefix is now exclusively used for software and manual installation.
--openssldir is not exclusively used as a default location for certs,
keys and the default openssl.cnf.
This change is made to bring clarity, to have the two less
intertwined, and to be more compatible with the usual ways of software
installation.
Please change your habits and scripts to use --prefix rather than
--openssldir for installation location now.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The GOST engine is now out of date and is removed by this commit. An up
to date GOST engine is now being maintained in an external repository.
See:
https://wiki.openssl.org/index.php/Binaries
Reviewed-by: Richard Levitte <levitte@openssl.org>
Author: Remi Gacogne <rgacogne-github@coredump.fr>
GH334: Add an OCSP_SINGLERESP_get0_id() accessor to the OCSP_CERTID of
a OCSP_SINGLERESP. It is possible to do it the other way around using
OCSP_resp_find(), but this is more efficient when you have a tree indexed
by OCSP_CERTID, like haproxy does. (This is also RT4251)
Author: Marek Klein <kleinmrk@gmail.com>
GH556: OCSP_resp_get_produced_at() accessor to the producedAt of a
OCSP_BASICRESP
GH555: TS_STATUS_INFO_get_status(), TS_STATUS_INFO_get_text() and
TS_STATUS_INFO_get_failure_info() accessors for a TS_STATUS_INFO
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
It seems that the r modifier for s/// is fairly new. It's reported
not to exist in perl 5.10.1, so it's better to avoid it when
possible.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The entropy-gathering daemon is used only on a small number of machines.
Provide a configure knob so that EGD support can be disabled by default
but re-enabled on those systems that do need it.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
It turns out that -pause calls the undocumented function SSL_set_debug.
That just sets flag inside the SSL structure. That flag, despite
the command is never used. So remove the flag, the field, and the
function.
Reviewed-by: Richard Levitte <levitte@openssl.org>
util/mk1mf.pl was relying on the platform having the 'debug-' prefix
for doing a debug build. Since the setup of targets has changed, this
is no longer true. However, it can look for '--debug' in the command
line options.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add CRYPTO_EX_DATA add EndC_KEY_[gs]et_method, From Roumen Petrov.
Had to add various exdata calls to init/copy/free the exdata.
Had to remove const from some EC functions because exdata isn't
const-correct. :(
Also remove EC_EXTRA_DATA and use a union to hold the possible
pre-computed values and an enum to tell which value is in the
union. (Rich Salz)
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
It was assumed that the syntax FOO/Foo=PROCEDURE would create both an
upper case and mixed case symbol in the GST. Not so, it requires
having both FOO/Foo=PROCEDURE (to create the upper case alias) and
Foo=PROCEDURE (to create the mixed case slot).
We make sure that any symbol always occupies two slots (even those
that don't exist) by filling up with SPARE when necessary. That will
assure that any changes will still have the same symbols in the same
slots no matter what (save a complete rewrite of the ordinals files).
Reviewed-by: Rich Salz <rsalz@openssl.org>
It was assumed that a dummy with the type PRIVATE_PROCEDURE would
simply occupy a slot but otherwise ignore the symbol. Not so, but
there is SPARE for that purpose.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Make LHASH_OF use static inline functions.
Add new lh_get_down_load and lh_set_down_load functions and their
typesafe inline equivalents.
Make lh_error a function instead of a macro.
Reviewed-by: Rich Salz <rsalz@openssl.org>
These now take and return unsigned long, and get is constified.
Updated related documentation and util/ssleay.num
Reviewed-by: Matt Caswell <matt@openssl.org>
In order for mkdep to find #ifdef'd functions, they must be
wrapped (in the header file) with
#ifndef OPENSSL_NO_...
So do that for various CRYPTO_mem_debug... things.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Only two macros CRYPTO_MDEBUG and CRYPTO_MDEBUG_ABORT to control this.
If CRYPTO_MDEBUG is not set, #ifdef out the whole debug machinery.
(Thanks to Jakob Bohm for the suggestion!)
Make the "change wrapper functions" be the only paradigm.
Wrote documentation!
Format the 'set func' functions so their paramlists are legible.
Format some multi-line comments.
Remove ability to get/set the "memory debug" functions at runtme.
Remove MemCheck_* and CRYPTO_malloc_debug_init macros.
Add CRYPTO_mem_debug(int flag) function.
Add test/memleaktest.
Rename CRYPTO_malloc_init to OPENSSL_malloc_init; remove needless calls.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Applications wishing to include their own stacks now just need to include
DEFINE_STACK_OF(foo)
in a header file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Change DECLARE_STACK_OF into inline functions. This avoids the need for
auto generated mkstack.pl macros and now handles const properly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If the client sends a status_request extension in the ClientHello
and the server responds with a status_request extension in the
ServerHello then normally the server will also later send a
CertificateStatus message. However this message is *optional* even
if the extensions were sent. This adds a test to ensure that if
the extensions are sent then we can still omit the message.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Rename to OPENSSL_mem_debug_{push,pop}.
Remove simple calls; keep only calls used in recursive functions.
Ensure we always push, to simplify so that we can always pop
Reviewed-by: Richard Levitte <levitte@openssl.org>
Just like *_clear_free routines. Previously undocumented, used
a half-dozen times within OpenSSL source.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
Add #define's for the old names.
Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The previous commit introduced a new file format for ssleay.num and
libeay.num, i.e. the introduction of a version field. Therefore the update
capability in mkdef.pl needs updating to take account of the new format.
Reviewed-by: Richard Levitte <levitte@openssl.org>
On Linux when creating the .so file we were exporting all symbols. We should
only be exporting public symbols. This commit fixes the issue. It is only
applicable to linux currently although the same technique may work for other
platforms (e.g. Solaris should work the same way).
This also adds symbol version information to our exported symbols.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Looking over names, it seems like we usually use names ending with
_new and _free as object constructors and destructors. Also, since
EVP_MD_CTX_init is now used to reset a EVP_MD_CTX, it might as well be
named accordingly.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This only gets used to set a specific curve without actually checking that the
peer supports it or not and can therefor result in handshake failures that can
be avoided by selecting a different cipher.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Add CRYPTO_free_ex_index (for shared libraries)
Unify and complete the documentation for all "ex_data" API's and objects.
Replace xxx_get_ex_new_index functions with a macro.
Added an exdata test.
Renamed the ex_data internal datatypes.
Reviewed-by: Matt Caswell <matt@openssl.org>
Implements Thread Local Storage in the windows async port. This also has
some knock on effects to the posix and null implementations.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In theory the pthreads approach for Thread Local Storage should be more
portable.
This also changes some APIs in order to accommodate this change. In
particular ASYNC_init_pool is renamed ASYNC_init_thread and
ASYNC_free_pool is renamed ASYNC_cleanup_thread. Also introduced ASYNC_init
and ASYNC_cleanup.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There are potential deadlock situations that can occur if code executing
within the context of a job aquires a lock, and then pauses the job. This
adds an ability to temporarily block pauses from occuring whilst performing
work and holding a lock.
Reviewed-by: Rich Salz <rsalz@openssl.org>
During development some functions got added and then later taken away.
Since these will never appear in a production version there is no reason
for them to appear in libeay.num flagged as "NOEXIST".
Reviewed-by: Rich Salz <rsalz@openssl.org>
It is expensive to create the ASYNC_JOB objects due to the "makecontext"
call. This change adds support for pools of ASYNC_JOB objects so that we
don't have to create a new ASYNC_JOB every time we want to use one.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Where we can we should use longjmp and setjmp in preference to swapcontext/
setcontext as they seem to be more performant.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This engine is for developers of async aware applications. It simulates
asynchronous activity with external hardware. This initial version supports
SHA1 and RSA. Certain operations using those algorithms have async job
"pauses" in them - using the new libcrypto async capability.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The new function SSL_use_certificate_chain_file was always crashing in
the internal function use_certificate_chain_file because it would pass a
NULL value for SSL_CTX *, but use_certificate_chain_file would
unconditionally try to dereference it.
Reviewed-by: Stephen Henson <steve@openssl.org>
In mkerr.pl read parse functions names in C source files and use
them for translation and sanity checks.
Reviewed-by: Richard Levitte <levitte@openssl.org>
mkdef.pl was getting confused by:
# ifdef OPENSSL_NO_RMD160
# error RIPEMD is disabled.
# endif
Changing RIPEMD to RMD160 solves it. Fix suggested by Steve Henson.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Some makedepend mechanisms remove all directory information in the
target, so a dependency can looks like this:
ssl3_record.o: record/ssl3_record.c
However, that doesn't quite suit us, our Makefile has us build
record/ssl3_record.o rather than ssl3_record.o.
To clear this up, a change to util/clean-depend.pl takes care of this
case by looking up the original file in the dependencies and restoring
the directory information from it.
Reviewed-by: Ben Laurie <ben@openssl.org>
Much related/similar work also done by
Ivan Nestlerode <ivan.nestlerode@sonos.com>
+Replace FILE BIO's with dummy ops that fail.
+Include <stdio.h> for sscanf() even with no-stdio (since the declaration
is there). We rely on sscanf() to parse the OPENSSL_ia32cap environment
variable, since it can be larger than a 'long'. And we don't rely on the
availability of strtoull().
+Remove OPENSSL_stderr(); not used.
+Make OPENSSL_showfatal() do nothing (currently without stdio there's
nothing we can do).
+Remove file-based functionality from ssl/. The function
prototypes were already gone, but not the functions themselves.
+Remove unviable conf functionality via SYS_UEFI
+Add fallback definition of BUFSIZ.
+Remove functions taking FILE * from header files.
+Add missing DECLARE_PEM_write_fp_const
+Disable X509_LOOKUP_hash_dir(). X509_LOOKUP_file() was already compiled out,
so remove its prototype.
+Use OPENSSL_showfatal() in CRYPTO_destroy_dynlockid().
+Eliminate SRP_VBASE_init() and supporting functions. Users will need to
build the verifier manually instead.
+Eliminate compiler warning for unused do_pk8pkey_fp().
+Disable TEST_ENG_OPENSSL_PKEY.
+Disable GOST engine as is uses [f]printf all over the place.
+Eliminate compiler warning for unused send_fp_chars().
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Previously you could only set both the default path and file locations
together. This adds the ability to set one without the other.
Reviewed-by: Andy Polyakov <appro@openssl.org>
TLSProxy was failing if we are Configured with compression because it
doesn't support it. This fix simply switches compression off for the
purposes of the test.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This code does open-coded division on 64-bit quantities and thus when
building with GCC on 32-bit platforms will require functions such as
__umoddi3 and __udivdi3 from libgcc.
In constrained environments such as firmware, those functions may not
be available. So make it possible to compile out SCT support, which in
fact (in the case of UEFI) we don't need anyway.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
With the new testing framework, building a test target with mk1mf.pl
becomes a very simple thing. And especially, no more need to do the
amount of hackery in unix.pl we did.
Also, some tests need a working apps/CA.pl as well as rehashed certs
in certs/demo. So, move the code creating those files so it gets done
regardless, not just in non-mk1mf environments.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Most of the accessors existed and were already used so it was easy.
TS_VERIFY_CTX didn't have accessors/settors so I added the simple and
obvious ones, and changed the app to use them. Also, within crypto/ts,
replaced the functions with direct access to the structure members
since we generally aren't opaque within a directory.
Also fix RT3901.
Reviewed-by: Tim Hudson <tjh@openssl.org>
This does 64-bit division and multiplication, and on 32-bit platforms
pulls in libgcc symbols (and MSVC does similar) which may not be
available. Mostly done by David Woodhouse.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
This reverts the non-cleanup parts of commit c73ad69017. We do actually
have a reasonable use case for OPENSSL_NO_RFC3779 in the EDK2 UEFI
build, since we don't have a strspn() function in our runtime environment
and we don't want the RFC3779 functionality anyway.
In addition, it changes the default behaviour of the Configure script so
that RFC3779 support isn't disabled by default. It was always disabled
from when it was first added in 2006, right up until the point where
OPENSSL_NO_RFC3779 was turned into a no-op, and the code in the
Configure script was left *trying* to disable it, but not actually
working.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Also has changes from from David Woodhouse <David.Woodhouse@intel.com>
and some tweaks from me.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
There are many places (nearly 50) where we malloc and then memset.
Add an OPENSSL_zalloc routine to encapsulate that.
(Missed one conversion; thanks Richard)
Also fixes GH328
Reviewed-by: Richard Levitte <levitte@openssl.org>
Previously TLSProxy would detect a successful handshake once it saw the
server Finished message. This causes problems with abbreviated handshakes,
or if the client fails to process a message from the last server flight.
This change additionally sends some application data and finishes when the
client sends a CloseNotify.
Reviewed-by: Tim Hudson <tjh@openssl.org>
- select an actual file handle for devnull
- do not declare $msgdata twice
- SKE records sometimes seem to come without sig
- in SKE parsing, use and use $pub_key_len when parsing $pub_key
Reviewed-by: Matt Caswell <matt@openssl.org>
Use a dynamic engine for ossltest engine so that we can build it without
subsequently deploying it during install. We do not want people accidentally
using this engine.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Add ServerHello parsing to TLSProxy.
Also add some (very) limited ServerKeyExchange parsing.
Add the capability to set client and server cipher lists
Fix a bug with fragment lengths
Reviewed-by: Richard Levitte <levitte@openssl.org>
This commit provides a set of perl modules that support the testing of
libssl. The test harness operates as a man-in-the-middle proxy between
s_server and s_client. Both s_server and s_client must be started using the
"-testmode" option which loads the new OSSLTEST engine.
The test harness enables scripts to be written that can examine the packets
sent during a handshake, as well as (potentially) modifying them so that
otherwise illegal handshake messages can be sent.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Removed ability to set ex_data impl at runtime. This removed these
three functions:
const CRYPTO_EX_DATA_IMPL *CRYPTO_get_ex_data_implementation(void);
int CRYPTO_set_ex_data_implementation(const CRYPTO_EX_DATA_IMPL *i);
int CRYPTO_ex_data_new_class(void);
It is no longer possible to change the ex_data implementation at
runtime. (Luckily those functions were never documented :)
Also removed the ability to add new exdata "classes." We don't believe
this received much (if any) use, since you can't add it to OpenSSL objects,
and there are probably better (native) methods for developers to add
their own extensible data, if they really need that.
Replaced the internal hash table (of per-"class" stacks) with a simple
indexed array. Reserved an index for "app" application.
Each API used to take the lock twice; now it only locks once.
Use local stack storage for function pointers, rather than malloc,
if possible (i.e., number of ex_data items is under a dozen).
Make CRYPTO_EX_DATA_FUNCS opaque/internal.
Also fixes RT3710; index zero is reserved.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This leaves behind files with names ending with '.iso-8859-1'. These
should be safe to remove. If something went wrong when re-encoding,
there will be some files with names ending with '.utf8' left behind.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add secure heap for storage of private keys (when possible).
Add BIO_s_secmem(), CBIGNUM, etc.
Add BIO_CTX_secure_new so all BIGNUM's in the context are secure.
Contributed by Akamai Technologies under the Corporate CLA.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The new accessors SSL_get_client_random, SSL_get_server_random and
SSL_SESSION_get_master_key should return a size_t to match the type of the
|outlen| parameter.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Given the pervasive nature of TLS extensions it is inadvisable to run
OpenSSL without support for them. It also means that maintaining
the OPENSSL_NO_TLSEXT option within the code is very invasive (and probably
not well tested). Therefore it is being removed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Continuing from the previous commit this changes the way we do client side
version negotiation. Similarly all of the s23* "up front" state machine code
has been avoided and again things now work much the same way as they already
did for DTLS, i.e. we just do most of the work in the
ssl3_get_server_hello() function.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
This commit changes the way that we do server side protocol version
negotiation. Previously we had a whole set of code that had an "up front"
state machine dedicated to the negotiating the protocol version. This adds
significant complexity to the state machine. Historically the justification
for doing this was the support of SSLv2 which works quite differently to
SSLv3+. However, we have now removed support for SSLv2 so there is little
reason to maintain this complexity.
The one slight difficulty is that, although we no longer support SSLv2, we
do still support an SSLv3+ ClientHello in an SSLv2 backward compatible
ClientHello format. This is generally only used by legacy clients. This
commit adds support within the SSLv3 code for these legacy format
ClientHellos.
Server side version negotiation now works in much the same was as DTLS,
i.e. we introduce the concept of TLS_ANY_VERSION. If s->version is set to
that then when a ClientHello is received it will work out the most
appropriate version to respond with. Also, SSLv23_method and
SSLv23_server_method have been replaced with TLS_method and
TLS_server_method respectively. The old SSLv23* names still exist as
macros pointing at the new name, although they are deprecated.
Subsequent commits will look at client side version negotiation, as well of
removal of the old s23* code.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Added depencies on the public variants of some keys in test to Makefile.
Added the newly introduced key files from test/ in the list of files
to copy in util/pl/unix.pl.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There are header files in crypto/ that are used by the rest of
OpenSSL. Move those to include/internal and adapt the affected source
code, Makefiles and scripts.
The header files that got moved are:
crypto/constant_time_locl.h
crypto/o_dir.h
crypto/o_str.h
Reviewed-by: Matt Caswell <matt@openssl.org>
Following on from the removal of libcrypto and libssl support for Kerberos
this commit removes all remaining references to Kerberos.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Remove RFC2712 Kerberos support from libssl. This code and the associated
standard is no longer considered fit-for-purpose.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Since COMP_METHOD is now defined in comp_lcl.h, it is no
longer possible to create new TLS compression methods without
using the OpenSSL source. Only ZLIB is supported by default.
Also, since the types are opaque, #ifdef guards to use "char *"
instead of the real type aren't necessary.
The changes are actually minor. Adding missing copyright to some
files makes the diff misleadingly big.
Reviewed-by: Matt Caswell <matt@openssl.org>
Add SSL_use_certiicate_chain file functions: this is works the same
way as SSL_CTX_use_certificate_chain_file but for an SSL structure.
Update SSL_CONF code to use the new function.
Update docs.
Update ordinals.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add OPENSSL_clear_free which merges cleanse and free.
(Names was picked to be similar to BN_clear_free, etc.)
Removed OPENSSL_freeFunc macro.
Fixed the small simple ones that are left:
CRYPTO_free CRYPTO_free_locked OPENSSL_free_locked
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove ERR_[gs]et_implementation as they were not undocumented and
useless (the data structure was opaque).
Halve the number of lock/unlock calls in almost all ERR_
functions by letting the caller of get_hash or int_thread_set
able to lock. Very useful when looping, such as adding errors,
or when getting the hash and immediately doing a lookup on it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
We have an increasing number of function declarations starting with
'__owur'. Unfortunately, util/ck_errf.pl fails to detect them. A
simple change fixes that issue.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
The previous check assumed that the variables for each test app, ending
with TEST would be indication enough. Experience showed that this isn't
the best way. Instead, simply look for the EXE variable in test/Makefile.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This is merges the old "rsalz-monolith" branch over to master. The biggest
change is that option parsing switch from cascasding 'else if strcmp("-foo")'
to a utility routine and somethin akin to getopt. Also, an error in the
command line no longer prints the full summary; use -help (or --help :)
for that. There have been many other changes and code-cleanup, see
bullet list below.
Special thanks to Matt for the long and detailed code review.
TEMPORARY:
For now, comment out CRYPTO_mem_leaks() at end of main
Tickets closed:
RT3515: Use 3DES in pkcs12 if built with no-rc2
RT1766: s_client -reconnect and -starttls broke
RT2932: Catch write errors
RT2604: port should be 'unsigned short'
RT2983: total_bytes undeclared #ifdef RENEG
RT1523: Add -nocert to fix output in x509 app
RT3508: Remove unused variable introduced by b09eb24
RT3511: doc fix; req default serial is random
RT1325,2973: Add more extensions to c_rehash
RT2119,3407: Updated to dgst.pod
RT2379: Additional typo fix
RT2693: Extra include of string.h
RT2880: HFS is case-insensitive filenames
RT3246: req command prints version number wrong
Other changes; incompatibilities marked with *:
Add SCSV support
Add -misalign to speed command
Make dhparam, dsaparam, ecparam, x509 output C in proper style
Make some internal ocsp.c functions void
Only display cert usages with -help in verify
Use global bio_err, remove "BIO*err" parameter from functions
For filenames, - always means stdin (or stdout as appropriate)
Add aliases for -des/aes "wrap" ciphers.
*Remove support for IISSGC (server gated crypto)
*The undocumented OCSP -header flag is now "-header name=value"
*Documented the OCSP -header flag
Reviewed-by: Matt Caswell <matt@openssl.org>
Since source reformat, we ended up with some error reason string
definitions that spanned two lines. That in itself is fine, but we
sometimes edited them to provide better strings than what could be
automatically determined from the reason macro, for example:
{ERR_REASON(SSL_R_NO_GOST_CERTIFICATE_SENT_BY_PEER),
"Peer haven't sent GOST certificate, required for selected ciphersuite"},
However, mkerr.pl didn't treat those two-line definitions right, and
they ended up being retranslated to whatever the macro name would
indicate, for example:
{ERR_REASON(SSL_R_NO_GOST_CERTIFICATE_SENT_BY_PEER),
"No gost certificate sent by peer"},
Clearly not what we wanted. This change fixes this problem.
Reviewed-by: Matt Caswell <matt@openssl.org>
GitConfigure: no more 'no-symlinks'
util/bat.sh, util/mk1mf.pl, util/pl/VC-32.pl, util/pl/unix.pl:
- Remove all uses of EXHEADER.
That includes removing the use if INC_D and INCO_D.
- Replace the check for TEST with a check for [A-Z0-9_]*TEST.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Rather than making include/openssl/foo.h a symlink to
crypto/foo/foo.h, this change moves the file to include/openssl/foo.h
once and for all.
Likewise, move crypto/foo/footest.c to test/footest.c, instead of
symlinking it there.
Originally-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
When building on Unix, there are times when the 'EX_LIB' MINFO variable
contains valuable information. Make sure to take care of it.
fixrules in util/pl/unix.pl was previously changed with a simpler fix of
rules, with a comment claiming that's compatible with -j. Unfortunately,
this breaks multiline rules and doesn't change anything for single line
rules. While at it, do not prefix pure echo lines with a 'cd $(TEST_D) &&',
as that's rather silly.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Add new functions ASN1_TYPE_pack_sequence and ASN1_TYPE_unpack_sequence:
these encode and decode ASN.1 SEQUENCE using an ASN1_TYPE structure.
Update ordinals.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Remove partially implemented d2i_X509_PKEY and i2d_X509_PKEY: nothing
uses them and they don't work properly. Update ordinals.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Thanks to the change of mkdef.pl, a few more deprecated functions were
properly defined in util/libeay.num.
Reviewed-by: Matt Caswell <matt@openssl.org>
For the moment, this is specially crafted for DECLARE_DEPRECATED because
that's where we found the problem, but it can easily be expanded to other
types of special delarations when needed.
Reviewed-by: Matt Caswell <matt@openssl.org>
Remove DECLARE_ASN1_SET_OF and DECLARE_PKCS12_STACK_OF these haven't been
used internally in OpenSSL for some time.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The format script didn't correctly recognise some ASN.1 macros and
didn't reformat some files as a result. Fix script and reformat
affected files.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The mkstack.pl script now generates the entire safestack.h file.
It generates output that follows the coding style.
Also, removed all instances of the obsolete IMPLEMENT_STACK_OF
macro.
Reviewed-by: Andy Polyakov <appro@openssl.org>
