The GOST ciphers are dynamically loaded via the GOST engine, so we must
be able to support that. The engine also uses DSA and CMS symbols, so we
skip the test on no-dsa or no-cms.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6730)
and catch corner cases better and earlier
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6690)
Fix the NULL check lack in a different way that is more compatible with
non-NULL branch. Refer #6632
Also mark and pop the error stack instead of clearing all errors when something
goes awry in CONF_get_number.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6643)
The problematic case falls back to a NULL conf which returns the result
of getenv(2). If this returns NULL, everything was good. If this returns
a string an attempt to convert it to a number is made using the function
pointers from conf.
This fix uses the strtol(3) function instead, we don't have the
configuration settings and this behaves as the default would.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6632)
This also adds the ability to control this through s_server
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6469)
1. For every named curve, two "golden" keypair positive tests.
2. Also two "golden" stock ECDH positive tests.
3. For named curves with non-trivial cofactors, additionally two "golden"
ECC CDH positive tests.
4. For named curves with non-trivial cofactors, additionally two negative
tests.
There is some overlap with existing EVP tests, especially for the NIST
curves (for example, positive testing ECC CDH KATs for NIST curves).
"Golden" here means all the values are independent from OpenSSL's ECC
code. I used sage to calculate them. What comes from OpenSSL is:
1. The OIDs (parsed by tooling)
2. The curve parameters (parsing ecparam output with tooling)
The values inside the PEMs (private keys, public keys) and shared keys
are from sage. The PEMs themselves are the output of asn1parse, with
input taken from sage.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6608)
Currently if you encounter application data while waiting for a
close_notify from the peer, and you have called SSL_shutdown() then
you will get a -1 return (fatal error) and SSL_ERROR_SYSCALL from
SSL_get_error(). This isn't accurate (it should be SSL_ERROR_SSL) and
isn't persistent (you can call SSL_shutdown() again and it might then work).
We change this into a proper fatal error that is persistent.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6340)
In the case where we are shutdown for writing and awaiting a close_notify
back from a subsequent SSL_shutdown() call we skip over handshake data
that is received. This should not be treated as an error - instead it
should be signalled with SSL_ERROR_WANT_READ.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6340)
Implement support for stateful TLSv1.3 tickets, and use them if
SSL_OP_NO_TICKET is set.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6563)
Fix prototype warnings triggered by -Wstrict-prototypes when configuring
with `enable-ec_nistp_64_gcc_128`
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6556)
(introduced by commit 9186016582, which added -Wstrict-prototypes)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6555)
Use EVP_PKEY_set_alias_type to access
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6443)
We generate the secrets based on the nonce immediately so there is no
need to keep the nonce.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6415)
Under a mingw shell, the command line path conversion either mangles
file: URIs to something useless (file;C:\...) or not at all (which
can't be opened by the Windows C RTL unless we're really lucky), so we
simply skip testing them in that environment.
Fixes#6369
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6376)
TlsGetValue clears the last error even on success, so that callers may
distinguish it successfully returning NULL or failing. This error-mangling
behavior interferes with the caller's use of GetLastError. In particular
SSL_get_error queries the error queue to determine whether the caller should
look at the OS's errors. To avoid destroying state, save and restore the
Windows error.
Fixes#6299.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6316)
Per SEC 1, the curve coefficients must be padded up to size. See C.2's
definition of Curve, C.1's definition of FieldElement, and 2.3.5's definition
of how to encode the field elements in http://www.secg.org/sec1-v2.pdf.
This comes up for P-521, where b needs a leading zero.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6314)
Don't apply DNS name constraints to the subject CN when there's a
least one DNS-ID subjectAlternativeName.
Don't apply DNS name constraints to subject CN's that are sufficiently
unlike DNS names. Checked name must have at least two labels, with
all labels non-empty, no trailing '.' and all hyphens must be
internal in each label. In addition to the usual LDH characters,
we also allow "_", since some sites use these for hostnames despite
all the standards.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Because TLS 1.3 sends more non-application data records some clients run
into problems because they don't expect SSL_read() to return and set
SSL_ERROR_WANT_READ after processing it.
This can cause problems for clients that use blocking I/O and use
select() to see if data is available. It can be cleared using
SSL_CTX_clear_mode().
Reviewed-by: Matt Caswell <matt@openssl.org>
GH: #6260
In TLSv1.2 and below we always cache new sessions by default on the server
side in the internal cache (even when we're using session tickets). This is
in order to support resumption from a session id.
In TLSv1.3 there is no session id. It is only possible to resume using the
ticket. Therefore, in the default case, there is no point in caching the
session in the internal store.
There is still a reason to call the external cache new session callback
because applications may be using the callbacks just to know about when
sessions are created (and not necessarily implementing a full cache). If
the application also implements the remove session callback then we are
forced to also store it in the internal cache so that we can create
timeout events. Otherwise the external cache could just fill up
indefinitely.
This mostly addresses the issue described in #5628. That issue also proposes
having an option to not create full stateless tickets when using the
internal cache. That aspect hasn't been addressed yet.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/6293)
Don't call the decrypt ticket callback if we've already encountered a
fatal error. Do call it if we have an empty ticket present.
Change the return code to have 5 distinct returns codes and separate it
from the input status value.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6198)
The recent change in behaviour where you do not get a NewSessionTicket
message sent if you established the connection using a PSK caused a mem
leak to be triggered in sslapitest. It was actually a latent bug and we
were just lucky we never hit it before. The problem is due to complexity
with the way PSK sessions were set up in the early_data tests. PSK session
reference counting was handled differently to normal session reference
counting. This meant there were lots of special cases in the code where
we don't free a session if it is a PSK. It makes things easier if we just
handle PSK reference counts in the same way as other session reference
counts, and then we can remove all of the special case code.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6198)
The return value from the ticket_key callback was not properly handled in
TLSv1.3, so that a ticket was *always* renewed even if the callback
requested that it should not be.
Also the ticket decrypt callback was not being called at all in TLSv1.3.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6198)
If using an old style PSK callback and no certificate is configured for
the server, we should prefer ciphersuites based on SHA-256, because that
is the default hash for those callbacks as specified in the TLSv1.3 spec.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6215)
In certain circumstances in the DTLS code we have to drop a record (e.g. if
it is a stale retransmit). We then have to move on to try and read the next
record. Some applications using blocking sockets (e.g. s_server/s_client
will hang if there isn't actually any data to be read from the socket yet).
Others can tolerate this. Therefore SSL_read()/SSL_write() can sometimes
return SSL_ERROR_WANT_READ/SSL_ERROR_WANT_WRITE even when using blocking
sockets. Applications can use the mode SSL_MODE_AUTO_RETRY, to switch this
behaviour off so that we never return unless we have read the data we
wanted to.
Commit ad96225285 fixed a DTLS problem where we always retried even if
SSL_MODE_AUTO_RETRY was not set. However that fix caused the Boring
ossl_shim to fail in some tests because it was relying on the previous
(buggy) behaviour. The ossl_shim should be set into SSL_MODE_AUTO_RETRY if
it is not operating asynchronously to avoid this problem.
[extended tests]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6216)
Drop a record from a handshake and check that we can still complete the
handshake. Repeat for all records in the handshake.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6170)
Previous tests only invoked CMS via the command line app. This test uses
the CMS API directly to do and encrypt and decrypt operation. This test
would have caught the memory leak fixed by the previous commit (when
building with enable-crypto-mdebug).
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6142)
The max protocol version was only being set on the server side. It should
have been done on both the client and the server.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6113)
No need to buildtest on opensslconf.h
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6149)
To my surprise, it turns out that on OpenVMS, opening './' (which
is translated to '[]') for writing actually creates a file, '[].'.
On OpenVMS, this is a perfectly valid file with no name or extension,
just the delimiter between the two.
Because of the mess the exception would generate in the test recipe,
it gets refactored again, to clearly separate each test inside it,
and use skips to avoid some of them (that makes it clear that they are
skipped and why, when running the recipe).
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6100)
Test writing to the null device. This should be successful.
Also, refactor so the planned number of tests is calculated.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6033)
The actual functionality of generating signatures through the `EVP_PKEY`
API is completely untested.
Current tests under the `EVP_PKEY` API
(`test/recipes/30-test_evp_data/evppkey.txt`) only cover `Verify` and
`Decrypt`, while encryption and signature generation are tested with
ad-hoc clients (`test/sm2crypttest.c`, `test/sm2signtest.c`) that do not
call the `EVP_PKEY` interface at all but soon-to-be private functions
that bypass it (cf. PR#5895 ).
It is my opinion that an ideal solution for the future would consist on
enhancing the `test/evp_pkey` facility and syntax to allow tests to take
control of the PRNG to inject known nonces and validate the results of
`EVP_PKEY` implementations against deterministic known answer tests, but
it is probably too late to work on this feature in time for next release.
Given that commit b5a85f70d8 highlights some critical bugs in the hook
between the `EVP_PKEY` interface and SM2 signature generation and that
these defects escaped testing and code review, I think that at least for
now it is beneficial to at least add the kind of "bogus" testing
provided by this patch:
this is a "fake" test as it does only verify that the SM2 `EVP_PKEY`
interface is capable of creating a signature without failing, but it
does not say anything about the generated signature being valid, nor
does it test the functional correctness of the cryptosystem.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6066)
The spec does not prohib certs form using compressed points. It only
requires that points in a key share are uncompressed. It says nothing
about point compression for certs, so we should not fail if a cert uses a
compressed point.
Fixes#5743
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/6055)
This fixes only those tests that were failing when network data was
fragmented. Remaining ones might succeed for "wrong reasons". Bunch
of tests have to fail to be considered successful and when data is
fragmented they might fail for reasons other than originally intended.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5975)
Client can only send early data if the PSK allows for it, the
max_early_data_size field can only be configured for the server side.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5702)
This will be necessary to enable Wireshark to decrypt QUIC 0-RTT data.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5702)
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5702)
The SSL_set_bio() tests only did standalone testing without being in the
context of an actual connection. We extend this to do additional tests
following a successful or failed connection attempt. This would have
caught the issue fixed in the previous commit.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5966)
Make sure the info callback gets called in all the places we expect it to.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5874)
- drbg_lib.c: Silence coverity warning: the comment preceding the
RAND_DRBG_instantiate() call explicitely states that the error
is ignored and explains the reason why.
- drbgtest: Add checks for the return values of RAND_bytes() and
RAND_priv_bytes() to run_multi_thread_test().
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5976)
Bind even test/ssltest_old.c to loopback interface. This allows to avoid
unnecessary alerts from Windows and Mac OS X firewalls.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5933)
There is a test to check that 'genrsa' doesn't accept absurdly low
number of bits. Apart from that, this test is designed to check the
working functionality of 'openssl genrsa', so instead of having a hard
coded lower limit on the size key, let's figure out what it is.
Partially fixes#5751
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/5754)
(cherry picked from commit ec46830f8a)
HP-UX gmtime fails with ERANGE past 19011213204552Z, so skip some tests.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5742)
felem_neg does not produce an output within the tight bounds suitable
for felem_contract. This affects build configurations which set
enable-ec_nistp_64_gcc_128.
point_double and point_add, in the non-z*_is_zero cases, tolerate and
fix up the wider bounds, so this only affects point_add calls where the
other point is infinity. Thus it only affects the final addition in
arbitrary-point multiplication, giving the wrong y-coordinate. This is a
no-op for ECDH and ECDSA, which only use the x-coordinate of
arbitrary-point operations.
Note: ecp_nistp521.c has the same issue in that the documented
preconditions are violated by the test case. I have not addressed this
in this PR. ecp_nistp521.c does not immediately produce the wrong
answer; felem_contract there appears to be a bit more tolerant than its
documented preconditions. However, I haven't checked the point_add
property above holds. ecp_nistp521.c should either get this same fix, to
be conservative, or have the bounds analysis and comments reworked for
the wider bounds.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5779)
If a nonce is required and the get_nonce callback is NULL, request 50%
more entropy following NIST SP800-90Ar1 section 9.1.
Reviewed-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
GH: #5503
Casting to the generic function type "void (*)(void)"
prevents the warning.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/5816)
test/cipherlist_test.c is an internal consistency check, and therefore
requires that the shared library it runs against matches what it was
built for. test/recipes/test_cipherlist.t is made to refuse running
unless library version and build version match.
This adds a helper program test/versions.c, that simply displays the
library and the build version.
Partially fixes#5751
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5753)
(cherry picked from commit cde87deafa)
Instead of invoking the fuzz test programs once for every corpora
file, we invoke them once for each directory of corpora files. This
dramatically reduces the number of program invikations, as well as the
time 99-test_fuzz.t takes to complete.
fuzz/test-corpus.c was enhanced to handle directories as well as
regular files.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5776)
If a server has been configured to use an ECDSA certificate, we should
allow it regardless of whether the server's own supported groups list
includes the certificate's group.
Fixes#2033
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5601)
The previous commit causes some tests to hang so we temporarily disable them.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5757)
myDSO_dsobyaddr and myDSO_free are only used in a narrow block of
code, and can therefore be made local to that block. Otherwise, some
compilers may warn that they are unused.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5733)
These errors were hidden because compiling this file didn't get the
macros derived from the dso_scheme attribute, and therefore, some code
never got compiled.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5733)
Although it deviates from the actual prototype of DSO_dsobyaddr(), this
is now ISO C compliant and gcc -Wpedantic accepts the code.
Added DATA segment checking to catch ptrgl virtual addresses. Avoid
memleaks with every AIX/dladdr() call. Removed debug-fprintf()s.
Added test case for DSO_dsobyaddr(), which will eventually call dladdr().
Removed unecessary AIX ifdefs again.
The implementation can only lookup function symbols, no data symbols.
Added PIC-flag to aix*-cc build targets.
As AIX is missing a dladdr() implementation it is currently uncertain our
exit()-handlers can still be called when the application exits. After
dlclose() the whole library might have been unloaded already.
Signed-off-by: Matthias Kraft <makr@gmx.eu>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5668)
The travis logs are going above 4Mb causing the builds to fail. One
test creates excessive output. This change reduces that output by approx
180k.
[extended tests]
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5694)
[extended tests]
The test_rand_reseed assumed that the global DRBGs were not used
previously. This assumption is false when the tests are executed
in random order (OPENSSL_TEST_RAND_ORDER). So we uninstantiate
them first and add a test for the first instantiation.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5680)
The error string header files aren't supposed to be included directly,
so there's no point testing that they can.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5678)
Have all test programs using that function specify those versions.
Additionally, have the remaining test programs that use SSL_CTX_new
directly specify at least the maximum protocol version.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5663)
The fix in conf_include_test.c seems to be required because some
compilers give an error if you give an empty string for the second
argument to strpbrk(). It doesn't really make sense to send an empty
string for this argument anyway, so make sure it has at least one character
in it.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5666)
When SSL_CTX is created preinitialize it with system default
configuration from system_default section.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4848)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5547)
Without actually using EVP_PKEY_FLAG_AUTOARGLEN
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4793)
Don't pass a pointer to uninitialized processed value
for BIO_CB_READ and BIO_CB_WRITE
Check the correct cmd code in BIO_callback_ctrl
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5516)
Raw private/public key loading may fail for X25519/X448 if ec has been
disabled.
Also fixed a missing blank line in evppkey.txt resulting in a warning in
the test output.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5664)
Conceptually in TLSv1.3 there can be multiple sessions associated with a
single connection. Each NewSessionTicket issued can be considered a
separate session. We can end up issuing multiple NewSessionTickets on a
single connection at the moment (e.g. in a post-handshake auth scenario).
Each of those issued tickets should have the new_session_cb called, it
should go into the session cache separately and it should have a unique
id associated with it (so that they can be found individually in the
cache).
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5644)
When doing a regression test, it's obvious that the version
test/shlibloadtest is built for will not be the same as the library
version. So we change the test to check for assumed compatibility.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5619)
Renamed to EVP_PKEY_new_raw_private_key()/EVP_new_raw_public_key() as per
feedback.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5520)
Previously private and public keys had to be pem encoded to be read by
evp_test. This enables us to embed the raw private/public key values
in the test file. The algorithm has to support EVP_PKEY_new_private_key()
and EVP_PKEY_new_public_key() for this to work.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5520)
Random path generation code in test/recipes/15-test_out_option.t
does not work: The code sets rand_path to "/test.pem". I.e. the
test will fail as expected for unprivileged user but will pass
for root user.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5595)
A place in clienthellotest was missed in converting to the new mechanism
for configuration of TLSv1.3 ciphersuites.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5392)
With the current mechanism, old cipher strings that used to work in 1.1.0,
may inadvertently disable all TLSv1.3 ciphersuites causing connections to
fail. This is confusing for users.
In reality TLSv1.3 are quite different to older ciphers. They are much
simpler and there are only a small number of them so, arguably, they don't
need the same level of control that the older ciphers have.
This change splits the configuration of TLSv1.3 ciphers from older ones.
By default the TLSv1.3 ciphers are on, so you cannot inadvertently disable
them through your existing config.
Fixes#5359
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5392)
These functions are similar to SSL_CTX_set_cookie_{generate,verify}_cb,
but used for the application-controlled portion of TLS1.3 stateless
handshake cookies rather than entire DTLSv1 cookies.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5463)
The ossl_shim doesn't know about TLSv1.3 so we should disable that
protocol version for all tests for now.
This fixes the current Travis failures.
[extended tests]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5593)
Adds application data into the encrypted session ticket
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3802)
Commit abe256e795 changed the config target
element from 'cxx' to 'CXX'; catch up accordingly.
Also use a space to offset the template boundary, per convention.
[extended tests]
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5577)
