Remove GMAC demo program because it has been superceded by the EVP MAC one
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7548)
pkey_test_ctrl() was designed for parsing values, not for using in
test runs. Relying on its returned value when it returned 1 even for
control errors made it particularly useless for mac_test_run().
Here, it gets replaced with a MAC specific control function, that
parses values the same way but is designed for use in a _run() rather
than a _parse() function.
This uncovers a SipHash test with an invalid control that wasn't
caught properly. After all, that stanza is supposed to test that
invalid control values do generate an error. Now we catch that.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7500)
Move the .num updating functionality to util/mknum.pl.
Rewrite util/mkdef.pl to create .def / .map / .opt files exclusively,
using the separate ordinals reading module.
Adapt the build files.
Adapt the symbol presence test.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7191)
Add a check that the two keys used for AES-XTS are different.
One test case uses the same key for both of the AES-XTS keys. This causes
a failure under FIP 140-2 IG A.9. Mark the test as returning a failure.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7120)
PR #3783 introduce coded to reset the server side SNI state in
SSL_do_handshake() to ensure any erroneous config time SNI changes are
cleared. Unfortunately SSL_do_handshake() can be called mid-handshake
multiple times so this is the wrong place to do this and can mean that
any SNI data is cleared later on in the handshake too.
Therefore move the code to a more appropriate place.
Fixes#7014
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/7149)
Added NIST test cases for these two as well.
Additionally deprecate the public definiton of HMAC_MAX_MD_CBLOCK in 1.2.0.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6972)
The EFD database does not state that the "ladd-2002-it-3" algorithm
assumes X1 != 0.
Consequently the current implementation, based on it, fails to compute
correctly if the affine x coordinate of the scalar multiplication input
point is 0.
We replace this implementation using the alternative algorithm based on
Eq. (9) and (10) from the same paper, which being derived from the
additive relation of (6) does not incur in this problem, but costs one
extra field multiplication.
The EFD entry for this algorithm is at
https://hyperelliptic.org/EFD/g1p/auto-shortw-xz.html#ladder-ladd-2002-it-4
and the code to implement it was generated with tooling.
Regression tests add one positive test for each named curve that has
such a point. The `SharedSecret` was generated independently from the
OpenSSL codebase with sage.
This bug was originally reported by Dmitry Belyavsky on the
openssl-users maling list:
https://mta.openssl.org/pipermail/openssl-users/2018-August/008540.html
Co-authored-by: Billy Brumley <bbrumley@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7000)
Having post handshake auth automatically switched on breaks some
applications written for TLSv1.2. This changes things so that an explicit
function call is required for a client to indicate support for
post-handshake auth.
Fixes#6933.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6938)
The TLSv1.4 tolerance test wasn't testing what we thought it was.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6741)
Test that a server can handle an unecrypted alert when normally the next
message is encrypted.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6887)
The spec says that a client MUST set legacy_version to TLSv1.2, and
requires servers to verify that it isn't SSLv3.
Fixes#6600
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6747)
The GOST ciphers are dynamically loaded via the GOST engine, so we must
be able to support that. The engine also uses DSA and CMS symbols, so we
skip the test on no-dsa or no-cms.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6730)
1. For every named curve, two "golden" keypair positive tests.
2. Also two "golden" stock ECDH positive tests.
3. For named curves with non-trivial cofactors, additionally two "golden"
ECC CDH positive tests.
4. For named curves with non-trivial cofactors, additionally two negative
tests.
There is some overlap with existing EVP tests, especially for the NIST
curves (for example, positive testing ECC CDH KATs for NIST curves).
"Golden" here means all the values are independent from OpenSSL's ECC
code. I used sage to calculate them. What comes from OpenSSL is:
1. The OIDs (parsed by tooling)
2. The curve parameters (parsing ecparam output with tooling)
The values inside the PEMs (private keys, public keys) and shared keys
are from sage. The PEMs themselves are the output of asn1parse, with
input taken from sage.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6608)
Use EVP_PKEY_set_alias_type to access
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6443)
Under a mingw shell, the command line path conversion either mangles
file: URIs to something useless (file;C:\...) or not at all (which
can't be opened by the Windows C RTL unless we're really lucky), so we
simply skip testing them in that environment.
Fixes#6369
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6376)
TlsGetValue clears the last error even on success, so that callers may
distinguish it successfully returning NULL or failing. This error-mangling
behavior interferes with the caller's use of GetLastError. In particular
SSL_get_error queries the error queue to determine whether the caller should
look at the OS's errors. To avoid destroying state, save and restore the
Windows error.
Fixes#6299.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6316)
Don't apply DNS name constraints to the subject CN when there's a
least one DNS-ID subjectAlternativeName.
Don't apply DNS name constraints to subject CN's that are sufficiently
unlike DNS names. Checked name must have at least two labels, with
all labels non-empty, no trailing '.' and all hyphens must be
internal in each label. In addition to the usual LDH characters,
we also allow "_", since some sites use these for hostnames despite
all the standards.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Previous tests only invoked CMS via the command line app. This test uses
the CMS API directly to do and encrypt and decrypt operation. This test
would have caught the memory leak fixed by the previous commit (when
building with enable-crypto-mdebug).
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6142)
To my surprise, it turns out that on OpenVMS, opening './' (which
is translated to '[]') for writing actually creates a file, '[].'.
On OpenVMS, this is a perfectly valid file with no name or extension,
just the delimiter between the two.
Because of the mess the exception would generate in the test recipe,
it gets refactored again, to clearly separate each test inside it,
and use skips to avoid some of them (that makes it clear that they are
skipped and why, when running the recipe).
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6100)
Test writing to the null device. This should be successful.
Also, refactor so the planned number of tests is calculated.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6033)
The actual functionality of generating signatures through the `EVP_PKEY`
API is completely untested.
Current tests under the `EVP_PKEY` API
(`test/recipes/30-test_evp_data/evppkey.txt`) only cover `Verify` and
`Decrypt`, while encryption and signature generation are tested with
ad-hoc clients (`test/sm2crypttest.c`, `test/sm2signtest.c`) that do not
call the `EVP_PKEY` interface at all but soon-to-be private functions
that bypass it (cf. PR#5895 ).
It is my opinion that an ideal solution for the future would consist on
enhancing the `test/evp_pkey` facility and syntax to allow tests to take
control of the PRNG to inject known nonces and validate the results of
`EVP_PKEY` implementations against deterministic known answer tests, but
it is probably too late to work on this feature in time for next release.
Given that commit b5a85f70d8 highlights some critical bugs in the hook
between the `EVP_PKEY` interface and SM2 signature generation and that
these defects escaped testing and code review, I think that at least for
now it is beneficial to at least add the kind of "bogus" testing
provided by this patch:
this is a "fake" test as it does only verify that the SM2 `EVP_PKEY`
interface is capable of creating a signature without failing, but it
does not say anything about the generated signature being valid, nor
does it test the functional correctness of the cryptosystem.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6066)
This fixes only those tests that were failing when network data was
fragmented. Remaining ones might succeed for "wrong reasons". Bunch
of tests have to fail to be considered successful and when data is
fragmented they might fail for reasons other than originally intended.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5975)
There is a test to check that 'genrsa' doesn't accept absurdly low
number of bits. Apart from that, this test is designed to check the
working functionality of 'openssl genrsa', so instead of having a hard
coded lower limit on the size key, let's figure out what it is.
Partially fixes#5751
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/5754)
(cherry picked from commit ec46830f8a)
test/cipherlist_test.c is an internal consistency check, and therefore
requires that the shared library it runs against matches what it was
built for. test/recipes/test_cipherlist.t is made to refuse running
unless library version and build version match.
This adds a helper program test/versions.c, that simply displays the
library and the build version.
Partially fixes#5751
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5753)
(cherry picked from commit cde87deafa)
Instead of invoking the fuzz test programs once for every corpora
file, we invoke them once for each directory of corpora files. This
dramatically reduces the number of program invikations, as well as the
time 99-test_fuzz.t takes to complete.
fuzz/test-corpus.c was enhanced to handle directories as well as
regular files.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5776)
The previous commit causes some tests to hang so we temporarily disable them.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5757)
Although it deviates from the actual prototype of DSO_dsobyaddr(), this
is now ISO C compliant and gcc -Wpedantic accepts the code.
Added DATA segment checking to catch ptrgl virtual addresses. Avoid
memleaks with every AIX/dladdr() call. Removed debug-fprintf()s.
Added test case for DSO_dsobyaddr(), which will eventually call dladdr().
Removed unecessary AIX ifdefs again.
The implementation can only lookup function symbols, no data symbols.
Added PIC-flag to aix*-cc build targets.
As AIX is missing a dladdr() implementation it is currently uncertain our
exit()-handlers can still be called when the application exits. After
dlclose() the whole library might have been unloaded already.
Signed-off-by: Matthias Kraft <makr@gmx.eu>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5668)
The travis logs are going above 4Mb causing the builds to fail. One
test creates excessive output. This change reduces that output by approx
180k.
[extended tests]
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5694)
When SSL_CTX is created preinitialize it with system default
configuration from system_default section.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4848)
Don't pass a pointer to uninitialized processed value
for BIO_CB_READ and BIO_CB_WRITE
Check the correct cmd code in BIO_callback_ctrl
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5516)
Raw private/public key loading may fail for X25519/X448 if ec has been
disabled.
Also fixed a missing blank line in evppkey.txt resulting in a warning in
the test output.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5664)
Random path generation code in test/recipes/15-test_out_option.t
does not work: The code sets rand_path to "/test.pem". I.e. the
test will fail as expected for unprivileged user but will pass
for root user.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5595)
With the current mechanism, old cipher strings that used to work in 1.1.0,
may inadvertently disable all TLSv1.3 ciphersuites causing connections to
fail. This is confusing for users.
In reality TLSv1.3 are quite different to older ciphers. They are much
simpler and there are only a small number of them so, arguably, they don't
need the same level of control that the older ciphers have.
This change splits the configuration of TLSv1.3 ciphers from older ones.
By default the TLSv1.3 ciphers are on, so you cannot inadvertently disable
them through your existing config.
Fixes#5359
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5392)
Adds application data into the encrypted session ticket
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3802)
This patch fixes two issues in the ia32 RDRAND assembly code that result in a
(possibly significant) loss of entropy.
The first, less significant, issue is that, by returning success as 0 from
OPENSSL_ia32_rdrand() and OPENSSL_ia32_rdseed(), a subtle bias was introduced.
Specifically, because the assembly routine copied the remaining number of
retries over the result when RDRAND/RDSEED returned 'successful but zero', a
bias towards values 1-8 (primarily 8) was introduced.
The second, more worrying issue was that, due to a mixup in registers, when a
buffer that was not size 0 or 1 mod 8 was passed to OPENSSL_ia32_rdrand_bytes
or OPENSSL_ia32_rdseed_bytes, the last (n mod 8) bytes were all the same value.
This issue impacts only the 64-bit variant of the assembly.
This change fixes both issues by first eliminating the only use of
OPENSSL_ia32_rdrand, replacing it with OPENSSL_ia32_rdrand_bytes, and fixes the
register mixup in OPENSSL_ia32_rdrand_bytes. It also adds a sanity test for
OPENSSL_ia32_rdrand_bytes and OPENSSL_ia32_rdseed_bytes to help catch problems
of this nature in the future.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5342)
Either files or directories of *.cnf or *.conf files
can be included.
Recursive inclusion of directories is not supported.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5351)
This adds the Ed448 test vectors from RFC8032 and the X448 test vectors
from RFC7748.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/5481)
So far check for availability of Win32::API served as implicit check
for $^O being MSWin32. Reportedly it's not safe assumption, and check
for MSWin32 has to be explicit.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5416)
The no-tls1_2 option does not work properly in conjunction with TLSv1.3
being enabled (which is now the default). This commit fixes the issues.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5301)
tls13encryptiontest is an "internal" test. As with all the other internal
tests it should not be run on a shared native Windows build.
[extended tests]
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5266)
The afalg engine was moved down from engines/afalg/ to engines/, but
the test wasn't changed accordingly. This was undetected because the
test program didn't fail when it couldn't load the engine.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5270)
Add SSL_verify_client_post_handshake() for servers to initiate PHA
Add SSL_force_post_handshake_auth() for clients that don't have certificates
initially configured, but use a certificate callback.
Update SSL_CTX_set_verify()/SSL_set_verify() mode:
* Add SSL_VERIFY_POST_HANDSHAKE to postpone client authentication until after
the initial handshake.
* Update SSL_VERIFY_CLIENT_ONCE now only sends out one CertRequest regardless
of when the certificate authentication takes place; either initial handshake,
re-negotiation, or post-handshake authentication.
Add 'RequestPostHandshake' and 'RequirePostHandshake' SSL_CONF options that
add the SSL_VERIFY_POST_HANDSHAKE to the 'Request' and 'Require' options
Add support to s_client:
* Enabled automatically when cert is configured
* Can be forced enabled via -force_pha
Add support to s_server:
* Use 'c' to invoke PHA in s_server
* Remove some dead code
Update documentation
Update unit tests:
* Illegal use of PHA extension
* TLSv1.3 certificate tests
DTLS and TLS behave ever-so-slightly differently. So, when DTLS1.3 is
implemented, it's PHA support state machine may need to be different.
Add a TODO and a #error
Update handshake context to deal with PHA.
The handshake context for TLSv1.3 post-handshake auth is up through the
ClientFinish message, plus the CertificateRequest message. Subsequent
Certificate, CertificateVerify, and Finish messages are based on this
handshake context (not the Certificate message per se, but it's included
after the hash). KeyUpdate, NewSessionTicket, and prior Certificate
Request messages are not included in post-handshake authentication.
After the ClientFinished message is processed, save off the digest state
for future post-handshake authentication. When post-handshake auth occurs,
copy over the saved handshake context into the "main" handshake digest.
This effectively discards the any KeyUpdate or NewSessionTicket messages
and any prior post-handshake authentication.
This, of course, assumes that the ID-22 did not mean to include any
previous post-handshake authentication into the new handshake transcript.
This is implied by section 4.4.1 that lists messages only up to the
first ClientFinished.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4964)
The rehash test broke the test if run by root. Instead, just skip the
check that requires non-root to be worth it.
Fixes#4387
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5184)
