returns an error code. Use the same code in Win9X
and NT.
Fix some ca.c options so they work under Win32:
unlink/rename wont work under Win32 unless the file
is closed.
Add "init" command to control ENGINE
initialization.
Call ENGINE_finish on initialized ENGINEs on exit.
Reorder shutdown in apps.c: modules should be shut
down first.
Add test private key loader to openssl ENGINE: this
just loads a private key in PEM format.
Fix print format for dh length parameter.
CONF_modules_unload() now calls CONF_modules_finish()
automatically.
Default use of section openssl_conf moved to
CONF_modules_load()
Load config file in several openssl utilities.
Most utilities now load modules from the config file,
though in a few (such as version) this isn't done
because it couldn't be used for anything.
In the case of ca and req the config file used is
the same as the utility itself: that is the -config
command line option can be used to specify an
alternative file.
* When linking against shared libraries, the absolute path is remembered.
- When linking against -L.., '..' is remembered inside the executable,
so it will fail after "make install" or when not called from inside the
"apps/" subdirectory of the build tree.
- When using the "+cdp" option of "ld", the ".." information can be
exchanged against $(INSTALL_TOP)/lib. In this case the executable
will however refuse to work before "make install" has been called.
This makes testing the 'openssl' executable a problem.
* Solution 1:
Relink the "openssl" executable, when "make install" is called.
This would however require significant changes to the toplevel Makefile
and the apps/ Makefile.
* Solution 2:
Statically link against libssl and libcrypto, so that the "openssl"
executable is no longer dependant on the openssl shared libraries.
Select option 2 for HP-UX 32bit, as this requires the smallest change.
* make openssl rsa work with -engine chil
* misc changes, including debug-linux-ppro Configure target
and FORMAT_NETSCAPE-aware load_{,pub}key()
This completes the application of his changes.
sooner and the programs get built against the shared libraries.
This requires a bit more work. Things like -rpath and the possibility
to still link the programs statically should be included. Some
cleanup is also needed. This will be worked on.
the e-mail address in the DN (i.e., it will go into a certificate
extension only). The new configuration file option 'email_in_dn = no'
has the same effect.
Submitted by: Massimiliano Pala madwolf@openca.org
libdes (which is still used out there) or other des implementations,
the OpenSSL DES functions are renamed to begin with DES_ instead of
des_. Compatibility routines are provided and declared by including
openssl/des_old.h. Those declarations are the same as were in des.h
when the OpenSSL project started, which is exactly how libdes looked
at that time, and hopefully still looks today.
The compatibility functions will be removed in some future release, at
the latest in version 1.0.
New macros SSL[_CTX]_set_msg_callback_arg().
Message callback imlementation for SSL 3.0/TLS 1.0 (no SSL 2.0 yet).
New '-msg' option for 'openssl s_client' and 'openssl s_server'
that enable a message callback that displays all protocol messages.
In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert if
client_version is smaller than the protocol version in use.
Also change ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0
if the client demanded SSL 3.0 but only TLS 1.0 is enabled; then the
client will at least see that alert.
Fix SSL[_CTX]_ctrl prototype (void * instead of char * for generic
pointer).
Add/update some OpenSSL copyright notices.
algorithms present in all loaded ENGINEs. The result is that if any of
those ENGINEs successfully initialises, and the ENGINE_TABLE_FLAG_NOINIT
flag isn't set, then they will always be used (and cached as defaults) in
preference to software implementations. Ie. accidental auto-detection of
acceleration hardware :-)
This change stops all implementations being automatically registered in
"openssl" sub-commands, so that the "setup_engine()" handler in apps.c
controls which ENGINEs are registered for use. A special case has been
added that will revert to this "auto-detect" logic, ie. if the "-engine"
switch is used as;
-engine auto
Show timing parameters and timing functions used.
It looks like some Linuxen have very weird settings for CLK_TCK. I'm
very unsure about this change and will investigate further.
(Working file: progs.h
revision 1.24
date: 2001/02/19 16:06:03; author: levitte; state: Exp; lines: +59 -59
Make all configuration macros available for application by making
sure they are available in opensslconf.h, by giving them names starting
with "OPENSSL_" to avoid conflicts with other packages and by making
sure e_os2.h will cover all platform-specific cases together with
opensslconf.h.
[...])
CRYPTO_set_mem_debug_options() instead of CRYPTO_dbg_set_options(),
which is the default implementation of the former and should usually
not be directly used by applications (at least if we assume that the
options accepted by the default implementation will also be meaningful
to any other implementations).
Also fix apps/openssl.c and ssl/ssltest such that environment variable
setting 'OPENSSL_DEBUG_MEMORY=off' actively disables the compiled-in
library defaults (i.e. such that CRYPTO_MDEBUG is ignored in this
case).
See the commit log message for that for more information.
NB: X509_STORE_CTX's use of "ex_data" support was actually misimplemented
(initialisation by "memset" won't/can't/doesn't work). This fixes that but
requires that X509_STORE_CTX_init() be able to handle errors - so its
prototype has been changed to return 'int' rather than 'void'. All uses of
that function throughout the source code have been tracked down and
adjusted.
things), especially as the RSA keys are fixed. However, DSA only fixes the
DSA parameters and then generates the public and private components on the
fly each time - this commit hard-codes some sampled key values so that this
is no longer the case.
SSL according to RFC 2712. His comment is:
This is a patch to openssl-SNAP-20010702 to support Kerberized SSL
authentication. I'm expecting to have the full kssl-0.5 kit up on
sourceforge by the end of the week. The full kit includes patches
for mod-ssl, apache, and a few text clients. The sourceforge URL
is http://sourceforge.net/projects/kssl/ .
Thanks to a note from Simon Wilkinson I've replaced my KRB5 AP_REQ
message with a real KerberosWrapper struct. I think this is fully
RFC 2712 compliant now, including support for the optional
authenticator field. I also added openssl-style ASN.1 macros for
a few Kerberos structs; see crypto/krb5/ if you're interested.
Add new extension functions which work with NCONF.
Tidy up extension config routines and remove redundant code.
Fix NCONF_get_number().
Todo: more testing of apps to see they still work...
to go the monolith way (does anyone do that these days?).
NOTE: a few applications are missing in this commit. I've a few more
changes in them that I haven't tested yet.
applications to use EVP. Add missing calls to HMAC_cleanup() and
don't assume HMAC_CTX can be copied using memcpy().
Note: this is almost identical to the patch submitted to openssl-dev
by Verdon Walker <VWalker@novell.com> except some redundant
EVP_add_digest_()/EVP_cleanup() calls were removed and some changes
made to avoid compiler warnings.
string (some engines may have certificates protected by a PIN!) and
a description to put into error messages.
Also, have our own password callback that we can send both a password
and some prompt info to. The default password callback in EVP assumes
that the passed parameter is a password, which isn't always the right
thing, and the ENGINE code (at least the nCipher one) makes other
assumptions...
Also, in spite of having the functions to load keys, some utilities
did the loading all by themselves... That's changed too.
ENGINE.
* Extra verbosity can be added with more "v"'s, eg. '-vvv' gives
information about input flags and descriptions for each control command
in each ENGINE. Check the output of "openssl engine -vvv" for example.
* '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on
the specified ENGINE (or on all of them if no engine id is specified,
although that usually gets pretty ugly). '-post' commands are only
attempted if '-t' is specified and the engine successfully initialises.
'-pre' commands are always attempted whether or not '-t' causes an
initialisation to be tried afterwards. Multiple '-pre' and/or '-post'
commands can be specified and they will be called in the order they
occur on the command line.
Parameterised commands (the normal case, there are currently no
unparameterised ones) are split into command and argument via a separating
colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in
the call;
ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0);
Application code should similarly allow arbitrary name-value string pairs
to be passed into ENGINEs in a manner matching that in apps/engine.c,
either using the same colon-separated format, or entered as two distinct
strings. Eg. as stored in a registry. The last parameter of
ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should
only be attempted if it's supported by the specified ENGINE (eg. for
commands like "FORK_CHECK:1" that may or may not apply to the run-time
ENGINE).
