Add copyright to most .pl files
This does NOT cover any .pl file that has other copyright in it.
Most of those are Andy's but some are public domain.
Fix typo's in some existing files.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make X509_OBJECT, X509_STORE_CTX, X509_STORE, X509_LOOKUP,
and X509_LOOKUP_METHOD opaque.
Remove unused X509_CERT_FILE_CTX
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Travis identified a problem with freeing the ex_data locks which wasn't
quite right in ff2344052. Trying to fix it identified a further problem:
the ex_data locks are cleaned up by OPENSSL_cleanup(), which is called
explicitly by CRYPTO_mem_leaks(), but then later the BIO passed to
CRYPTO_mem_leaks() is freed. An attempt is then made to use the ex_data
lock already freed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
There is a preference for suffixes to indicate that a function is internal
rather than prefixes. Note: the suffix is only required to disambiguate
internal functions and public symbols with the same name (but different
case)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
There was a lot of naming inconsistency, so we try and standardise on
one form.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
ENGINE_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
OBJ_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
EVP_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
CRYPTO_cleanup_all_ex_data() should not be called expicitly - we should
leave auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
RAND_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
ERR_free_strings() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Don't have #error statements in header files, but instead wrap
the contents of that file in #ifndef OPENSSL_NO_xxx
This means it is now always safe to include the header file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
We had the function EVP_CIPHER_CTX_cipher_data which is newly added for
1.1.0. As we now also need an EVP_CIPHER_CTX_set_cipher_data it makes
more sense for the former to be called EVP_CIPHER_CTX_get_cipher_data.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Make PKCS8_PRIV_KEY_INFO opaque. Several accessor functions already exist
for this structure. Two new ones were added to handle attributes.
The old handling of broken formats has been removed and the corresponding
structures simplified.
Reviewed-by: Rich Salz <rsalz@openssl.org>
1. Cleaned up eventfd handling
2. Reworked socket setup code to allow other algorithms to be added in
future
3. Fixed compile errors for static build
4. Added error to error stack in all cases of ALG_PERR/ALG_ERR
5. Called afalg_aes_128_cbc() from bind() to avoid race conditions
6. Used MAX_INFLIGHT define in io_getevents system call
7. Coding style fixes
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
This patch implements the HMAC-based Extract-and-Expand Key Derivation
Function (HKDF) as defined in RFC 5869.
It is required to implement the QUIC and TLS 1.3 protocols (among others).
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
In the BN_hex2bn function the number of hex digits is calculated using
an int value |i|. Later |bn_expand| is called with a value of |i * 4|.
For large values of |i| this can result in |bn_expand| not allocating any
memory because |i * 4| is negative. This leaves ret->d as NULL leading
to a subsequent NULL ptr deref. For very large values of |i|, the
calculation |i * 4| could be a positive value smaller than |i|. In this
case memory is allocated to ret->d, but it is insufficiently sized
leading to heap corruption. A similar issue exists in BN_dec2bn.
This could have security consequences if BN_hex2bn/BN_dec2bn is ever
called by user applications with very large untrusted hex/dec data. This is
anticipated to be a rare occurrence.
All OpenSSL internal usage of this function uses data that is not expected
to be untrusted, e.g. config file data or application command line
arguments. If user developed applications generate config file data based
on untrusted data then it is possible that this could also lead to security
consequences. This is also anticipated to be a rare.
Issue reported by Guido Vranken.
CVE-2016-0797
Reviewed-by: Andy Polyakov <appro@openssl.org>
The entire contents of <internal/bn_conf.h> are unwanted in the UEFI
build because we have to do it differently there. To support building
for both 32-bit and 64-bit platforms without re-running the OpenSSL
Configure script, the EDK2 environment defines THIRTY_TWO_BIT or
SIXTY_FOUR_BIT for itself according to the target platform.
The current setup is broken, though. It checks for OPENSSL_SYS_UEFI but
before it's actually defined, since opensslconf.h hasn't yet been
included.
Let's fix that by including opensslconf.h. And also let's move the
bn_conf.h doesn't even need to *exist* in the UEFI build environment.
This is also GH PR736.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Then it can pass around the information where it belongs. The
Makefile templates pick it up along with other target data, the
DSO module gets to pick up the information through
crypto/include/internal/dso_conf.h
Reviewed-by: Andy Polyakov <appro@openssl.org>
After the final use of the thread_local_inits_st we should ensure it is
set to NULL, just in case OPENSSL_INIT_thread_stop gets called again and
it tries to use garbage.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This commit provides the basis and core code for an auto initialisation
and deinitialisation framework for libcrypto and libssl. The intention is
to remove the need (in many circumstances) to call explicit initialise and
deinitialise functions. Explicit initialisation will still be an option,
and if non-default initialisation is needed then it will be required.
Similarly for de-initialisation (although this will be a lot easier since
it will bring all de-initialisation into a single function).
Reviewed-by: Richard Levitte <levitte@openssl.org>
Many options for supporting optimizations for legacy crypto on legacy
platforms have been removed. This simplifies the source code and
does not really penalize anyone.
DES_PTR (always on)
DES_RISC1, DES_RISC2 (always off)
DES_INT (always 'unsigned int')
DES_UNROLL (always on)
BF_PTR (always on) BF_PTR2 (removed)
MD2_CHAR, MD2_LONG (always 'unsigned char')
IDEA_SHORT, IDEA_LONG (always 'unsigned int')
RC2_SHORT, RC2_LONG (always 'unsigned int')
RC4_LONG (only int and char (for assembler) are supported)
RC4_CHUNK (always long), RC_CHUNK_LL (removed)
RC4_INDEX (always on)
And also make D_ENCRYPT macro more clear (@appro)
This is done in consultation with Andy.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.
And then some hand-editing of other files.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Now that we're using templates, we should warn people not to edit the
resulting file. We do it through util/dofile.pl, which is enhanced
with an option to tell what file it was called from. We also change
the calls so the template files are on the command line instead of
being redirected through standard input. That way, we can display
something like this (example taken from include/openssl/opensslconf.h):
/* WARNING: do not edit! */
/* Generated by Configure from include/openssl/opensslconf.h.in */
Reviewed-by: Rich Salz <rsalz@openssl.org>
