This leaves VPAES and AESNI support.
The VPAES performance is comparable but BSAES is not
completely constant time. There are table lookups
using secret key data in AES_set_encrypt/decrypt_key
and in ctr mode short data uses the non-constant
time AES_encrypt function instead of bit-slicing.
Furthermore the AES_ASM is by far outperformed
by recent GCC versions.
Since BSAES calls back to AES_ASM for short
data blocks the performance on those is also
worse than the pure software implementaion.
Fixes: #9640
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9675)
Requesting zero bytes from shake previously led to out-of-bounds write
on some platforms.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9433)
(cherry picked from commit a890ef833d)
Note a flag needed to be added since some ssl tests fail if they output any error
(even if the error is ignored). Only ciphers that handle the GET_IV_LEN control set this flag.
Fixes#8330
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9499)
The maximum key length for rc5 is 2040 bits so we should not attempt to
use keys longer than this.
Issue found by OSS-Fuzz and Guido Vranken.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8834)
(cherry picked from commit 792cb4ee8d)
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9275)
This feature is enabled by default outside of FIPS builds
which ban such actions completely.
Encryption is always disallowed and will generate an error.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9112)
(cherry picked from commit 2c840201e5)
67c81ec311 forgot about s390x
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8971)
(cherry picked from commit 887e22dd8b)
This change allows to pass the authentication tag after specifying
the AAD in CCM mode. This is already true for the other two supported
AEAD modes (GCM and OCB) and it seems appropriate to match the
behavior.
GCM and OCB also support to set the tag at any point before the call
to `EVP_*Final`, but this won't work for CCM due to a restriction
imposed by section 2.6 of RFC3610: The tag must be set before
actually decrypting data.
This commit also adds a test case for setting the tag after supplying
plaintext length and AAD.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7243)
(cherry picked from commit 67c81ec311)
Even with custome ciphers, the combination in == NULL && inl == 0
should not be passed down to the backend cipher function. The reason
is that these are the values passed by EVP_*Final, and some of the
backend cipher functions do check for these to see if a "final" call
is made.
Fixes#8675
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8676)
(cherry picked from commit dcb982d792)
We treat that as automatic success. Other EVP_*Update functions already do
this (e.g. EVP_EncryptUpdate, EVP_DecryptUpdate etc). EVP_EncodeUpdate is
a bit of an anomoly. That treats 0 byte input length as an error.
Fixes#8576
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8587)
(cherry picked from commit a8274ea351)
ChaCha20-Poly1305 is an AEAD cipher, and requires a unique nonce input for
every encryption operation. RFC 7539 specifies that the nonce value (IV)
should be 96 bits (12 bytes). OpenSSL allows a variable nonce length and
front pads the nonce with 0 bytes if it is less than 12 bytes. However it
also incorrectly allows a nonce to be set of up to 16 bytes. In this case
only the last 12 bytes are significant and any additional leading bytes are
ignored.
It is a requirement of using this cipher that nonce values are unique.
Messages encrypted using a reused nonce value are susceptible to serious
confidentiality and integrity attacks. If an application changes the
default nonce length to be longer than 12 bytes and then makes a change to
the leading bytes of the nonce expecting the new value to be a new unique
nonce then such an application could inadvertently encrypt messages with a
reused nonce.
Additionally the ignored bytes in a long nonce are not covered by the
integrity guarantee of this cipher. Any application that relies on the
integrity of these ignored leading bytes of a long nonce may be further
affected.
Any OpenSSL internal use of this cipher, including in SSL/TLS, is safe
because no such use sets such a long nonce value. However user
applications that use this cipher directly and set a non-default nonce
length to be longer than 12 bytes may be vulnerable.
CVE-2019-1543
Fixes#8345
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8406)
(cherry picked from commit 2a3d0ee9d5)
CLA: trivial
Function EVP_PKEY_size has been modified to take a const parameter
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7892)
(cherry picked from commit 47ec2367eb)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7277)
(cherry picked from commit 46d085096c)
zero-length ID is allowed, but it's not allowed to skip the ID.
Fixes: #6534
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7113)
Thus users can use this function to set customized EVP_PKEY_CTX to
EVP_MD_CTX structure.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7113)
In some cases it's about redundant check for return value, in some
cases it's about replacing check for -1 with comparison to 0.
Otherwise compiler might generate redundant check for <-1. [Even
formatting and readability fixes.]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6860)
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5935)
Fixes#6800
Replaces #5418
This commit reverts commit 7876dbffce and moves the check for a
zero-length input down the callstack into sha3_update().
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6838)
Improvement coefficients vary with TLS fragment length and platform, on
most Intel processors maximum improvement is ~50%, while on Ryzen - 80%.
The "secret" is new dedicated ChaCha20_128 code path and vectorized xor
helpers.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6638)
Inputs not longer than 64 bytes are processed ~10% faster, longer
lengths not divisble by 64, e.g. 255, up to ~20%. Unfortunately it's
impossible to measure with apps/speed.c, -aead benchmarks TLS-like
call sequence, but not exact. It took specially crafted code path...
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6597)
Use EVP_PKEY_set_alias_type to access
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6443)
Only applies to algorithms that support it. Both raw private and public
keys can be obtained for X25519, Ed25519, X448, Ed448. Raw private keys
only can be obtained for HMAC, Poly1305 and SipHash
Fixes#6259
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6394)
Even though calls can be viewed as styling improvement, they do come
with cost. It's not big cost and shows only on short inputs, but it is
measurable, 2-3% on some platforms.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6312)
Historically we used to implement standalone base64 code for SRP. This
was replaced by commit 3d3f21aa with the standard base64 processing code.
However, the SRP base64 code was designed to be compatible with other SRP
libraries (notably libsrp, but also others) that use a variant of standard
base64. Specifically a different alphabet is used and no padding '='
characters are used. Instead 0 padding is added to the front of the string.
By changing to standard base64 we change the behaviour of the API which may
impact interoperability. It also means that SRP verifier files created prior
to 1.1.1 would not be readable in 1.1.1 and vice versa.
Instead we expand our standard base64 processing with the capability to be
able to read and generate the SRP base64 variant.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5925)
Previously they were using EVP_EncodeBlock/EVP_DecodeBlock. These are low
level functions that do not handle padding characters. This was causing
the SRP code to fail. One side effect of using EVP_EncodeUpdate is that
it inserts newlines which is not what we need in SRP so we add a flag to
avoid that.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5925)
