Add functions to add/retrieve the certificate_authorities. The older
client_CA functions mainly just call the new versions now.
Rename fields sice new extension can be generated by client and server.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3015)
The macro SSL_get_server_tmp_key() returns information about the temp key
used by the server during a handshake. This was returning NULL for TLSv1.3
and causing s_client to omit this information in its connection summary.
Fixes#3081
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3114)
Variable 'pktype' was set but not used under OPENSSL_NO_GOST. This change
will fix the build warning under [-Werror=unused-but-set-variable].
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2961)
A similar change that probably should have been wrapped into
commit e0926ef49d.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3010)
Fix some comments too
[skip ci]
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3069)
Commit 6b1bb98fa moved the processing of ClientHello extensions into the
state machine post-processing stage. After processing s->init_num is reset
to 0, so by post-processing we cannot rely on its value. Unfortunately we
were using it to handle the PSK extension. This causes the handshake to
fail.
We were using init_num to figure out the length of ClientHello2 so we can
remove it from the handshake_buffer. The handshake_buffer holds the
transcript of all the messages sent so far. For PSK processing though we
only want to add in a partial ClientHello2. This commit changes things so
we just work out where ClientHello2 starts, working forward from the
beginning of handshake_buffer.
Fixes#2983
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2996)
In OpenSSL 1.1.0 the padding extension MUST be last because it calculates
the length of everything that has been written into the ClientHello to
determine whether it needs to be padded or not. With TLSv1.3 that isn't
possible because the specification requires that the PSK extension is last.
Therefore we need to fix the padding extension to take account of any PSK
extension that will be later added.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2968)
Choose a new ciphersuite for the HRR. Don't just use the one from the
session.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)
Don't include a PSK that does not have the right hash for the selected
ciphersuite following an HRR.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)
Draft-19 changes the HRR transcript hash so that the initial ClientHello
is replaced in the transcript with a special synthetic message_hash message
that just contains a hash of ClientHello1 as its message body.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)
The end of early data is now indicated by a new handshake message rather
than an alert.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)
tls1_get_curvelist() does not read from its third parameter, so
the assignments prior to function call were dead code and can be removed.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2952)
Instead of making a positive comparison against the invalid value
that our server would send, make a negative check against the only
value that is not an error.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2953)
Zero out the length alongside the NULLing of the pointer, to
bring parity between the selected and proposed fields..
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2954)
No need to break out of the loop and repeat the loop termination
condition when we can just return.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2949)
In TLSv1.3 the above messages signal a key change. The spec requires that
the end of these messages must align with a record boundary. We can detect
this by checking for decrypted but as yet unread record data sitting in
OpenSSL buffers at the point where we process the messages.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2875)
If early data is sent to a server, but ALPN is not used then memcmp is
called with a NULL pointer which is undefined behaviour.
Fixes#2841
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2845)
We do not allow the generation of TLSv1.3 cookies. But if we receive one
in an HRR we will echo it back in the ClientHello.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2839)
A leak of an SSL_SESSION object can occur when decoding a psk extension on
an error path when using TLSv1.3
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2843)
Check that we actually resumed the session, and that we selected the first
identity.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)
If the ticket age calcualtions do not check out then we must not accept
early data (it could be a replay).
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)
We also skip any early_data that subsequently gets sent. Later commits will
process it if we can.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)
We provide SSL_write_early() which *must* be called first on a connection
(prior to any other IO function including SSL_connect()/SSL_do_handshake()).
Also SSL_write_early_finish() which signals the end of early data.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)
- FLAT_INC
- PKCS1_CHECK (the SSL_OP_PKCS1_CHECK options have been
no-oped)
- PKCS_TESTVECT (debugging leftovers)
- SSL_AD_MISSING_SRP_USERNAME (unfinished feature)
- DTLS_AD_MISSING_HANDSHAKE_MESSAGE (unfinished feature)
- USE_OBJ_MAC (note this removes a define from the public header but
very unlikely someone would be depending on it)
- SSL_FORBID_ENULL
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
This removes the fips configure option. This option is broken as the
required FIPS code is not available.
FIPS_mode() and FIPS_mode_set() are retained for compatibility, but
FIPS_mode() always returns 0, and FIPS_mode_set() can only be used to
turn FIPS mode off.
Reviewed-by: Stephen Henson <steve@openssl.org>
This adds partial support for TLS 1.3 certificate request message.
The request context and extensions are currently ignored on receive
and set to zero length on send.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2728)
The certificate types used to be held in a fixed length array or (if
it was too long) a malloced buffer. This was done to retain binary
compatibility. The code can be simplified now SSL is opaque by always
using a malloced buffer.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2733)
Provide a callback interface that gives the application the ability
to adjust the nascent SSL object at the earliest stage of ClientHello
processing, immediately after extensions have been collected but
before they have been processed.
This is akin to BoringSSL's "select_certificate_cb" (though it is not
API compatible), and as the name indicates, one major use is to examine
the supplied server name indication and select what certificate to
present to the client. However, it can also be used to make more
sweeping configuration changes to the SSL object according to the
selected server identity and configuration. That may include adjusting
the permitted TLS versions, swapping out the SSL_CTX object (as is
traditionally done in a tlsext_servername_callback), changing the
server's cipher list, and more.
We also wish to allow an early callback to indicate that it needs to perform
additional work asynchronously and resume processing later. To that effect,
refactor the second half of tls_process_client_hello() into a subroutine to be
called at the post-processing stage (including the early callback itself), to
allow the callback to result in remaining in the same work stage for a later
call to succeed. This requires allocating for and storing the CLIENTHELLO_MSG
in the SSL object to be preserved across such calls, but the storage is
reclaimed after ClientHello processing finishes.
Information about the CliehtHello is available to the callback by means of
accessor functions that can only be used from the early callback. This allows
extensions to make use of the existing internal parsing machinery without
exposing structure internals (e.g., of PACKET), so that applications do not
have to write fragile parsing code.
Applications are encouraged to utilize an early callback and not use
a servername_callback, in order to avoid unexpected behavior that
occurs due to the relative order of processing between things like
session resumption and the historical servername callback.
Also tidy up nearby style by removing unnecessary braces around one-line
conditional bodies.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Add the new enum value and case statements as appropriate.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Split off the portions that mutate the SSL object into a separate
function that the state machine calls, so that the public API can
be a pure function. (It still needs the SSL parameter in order
to determine what SSL_METHOD's get_cipher_by_char() routine to use,
though.)
Instead of returning the stack of ciphers (functionality that was
not used internally), require using the output parameter, and add
a separate output parameter for the SCSVs contained in the supplied
octets, if desired. This lets us move to the standard return value
convention. Also make both output stacks optional parameters.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Move ssl_bytes_to_cipher_list() to ssl_lib.c and create a public
wrapper around it. This lets application early callbacks easily get
SSL_CIPHER objects from the raw ciphers bytes without having to
reimplement the parsing code. In particular, they do not need to
know the details of the sslv2 format ClientHello's ciphersuite
specifications.
Document the new public function, including the arguably buggy behavior
of modifying the supplied SSL object. On the face of it, such a function
should be able to be pure, just a direct translation of wire octets to
internal data structures.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Now that we have made SCSVs into more of a first-class object, provide
a way for the bytes-to-SSL_CIPHER conversion to actually return them.
Add a flag 'all' to ssl_get_cipher_by_char to indicate that we want
all the known ciphers, not just the ones valid for encryption. This will,
in practice, let the caller retrieve the SCSVs.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Keep track of the length of the pre_proc_exts array.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Modify the API of tls_collect_extensions() to be able to output the number of
extensions that are known (i.e., the length of its 'res' output). This number
can never be zero on a successful return due to the builtin extensions list,
but use a separate output variable so as to not overload the return value
semantics.
Having this value easily available will give consumers a way to avoid repeating
the calculation.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Too many KeyUpdate message could be inicative of a problem (e.g. an
infinite KeyUpdate loop if the peer always responds to a KeyUpdate message
with an "update_requested" KeyUpdate response), or (conceivably) an attack.
Either way we limit the number of KeyUpdate messages we are prepared to
handle.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2609)
For client auth call tls_choose_sigalg to select the certificate
and signature algorithm. Use the selected algorithm in
tls_construct_cert_verify.
Remove obsolete tls12_get_sigandhash.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2643)
In 1.1.0 changing the ciphersuite during a renegotiation can result in
a crash leading to a DoS attack. In master this does not occur with TLS
(instead you get an internal error, which is still wrong but not a security
issue) - but the problem still exists in the DTLS code.
The problem is caused by changing the flag indicating whether to use ETM
or not immediately on negotiation of ETM, rather than at CCS. Therefore,
during a renegotiation, if the ETM state is changing (usually due to a
change of ciphersuite), then an error/crash will occur.
Due to the fact that there are separate CCS messages for read and write
we actually now need two flags to determine whether to use ETM or not.
CVE-2017-3733
Reviewed-by: Richard Levitte <levitte@openssl.org>
Use negotiated signature algorithm and certificate index in
tls_construct_key_exchange instead of recalculating it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2623)
Now the certificate and signature algorithm is set in one place we
can use it directly insetad of recalculating it. The old functions
ssl_get_server_send_pkey() and ssl_get_server_cert_index() are no
longer required.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2623)
The original intent of SSL_PKEY_RSA_SIGN and SSL_PKEY_RSA_ENC was to
support two different keys for RSA signing and decrypt. However this
was never implemented and we only ever set one key and the other was
always NULL. Replace with single SSL_PKEY_RSA type.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2587)
Fixed a memory leak in ASN1_digest and ASN1_item_digest.
Reworked error handling in asn1_item_embed_new.
Fixed error handling in int_ctx_new and EVP_PKEY_CTX_dup.
Fixed a memory leak in CRYPTO_free_ex_data.
Reworked error handing in x509_name_ex_d2i, x509_name_encode and x509_name_canon.
Check for null pointer in tls_process_cert_verify.
Fixes#2103#2104#2105#2109#2111#2115
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2342)
We now set the server certificate in tls_choose_sigalg() so there is
no need for a special case for TLS 1.3 any more.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2339)
session_ctx and initial_ctx are aliases of each other, and with the
opaque data structures, there's no need to keep both around. Since
there were more references of session_ctx, replace all instances of
initial_ctx with session_ctx.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2334)
Store peer signature type in s->s3->tmp.peer_sigtype and check it
to see if the peer used PSS.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)
If we have deserialized the SSL_SESSION then in some circumstances the
session->cipher value is NULL. We were patching up in some places but not
in others. We should just do it as part of loading the SSL_SESSION.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
Don't attempt to add a TLS1.3 session to a TLS1.2 ClientHello session
ticket extensions. Similarly don't add a TLS1.2 session to a TLS1.3
psk extension.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
Make sure the session version consistency check is inside
ssl_get_prev_session(). Also fixes a bug where an inconsistent version can
cause a seg fault in TLSv1.3.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
This mops up various edge cases with key_shares and makes sure we still
generate the handshake secret if we haven't been provided with one but we
have a PSK.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
Requires a refactor of the ServerHello parsing, so that we parse first and
then subsequently process. This is because the resumption information is
held in the extensions block which is parsed last - but we need to know that
information earlier.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
The record layer was making decisions that should really be left to the
state machine around unexpected handshake messages that are received after
the initial handshake (i.e. renegotiation related messages). This commit
removes that code from the record layer and updates the state machine
accordingly. This simplifies the state machine and paves the way for
handling other messages post-handshake such as the NewSessionTicket in
TLSv1.3.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
The pointer that was freed in the SSLv2 section of ssl_bytes_to_cipher_list
may have stepped up from its allocated position. Use a pointer that is
guaranteed to point at the start of the allocated block instead.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2312)
When the client reads DH parameters from the TLS stream, we only
checked that they all are non-zero. This change updates the check to
use DH_check_params()
DH_check_params() is a new function for light weight checking of the p
and g parameters:
check that p is odd
check that 1 < g < p - 1
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Well, not as much, at least.
Commit 07afdf3c3a changed things so
that for SSLv2 format ClientHellos we store the cipher list in the
TLS format, i.e., with two bytes per cipher, to be consistent with
historical behavior.
However, the space allocated for the array still performed the computation
with three bytes per cipher, a needless over-allocation (though a relatively
small one, all things considered).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2281)
SSL_get0_raw_cipherlist() was a little too "raw" in the case of an SSLv2
compat ClientHello. In 1.0.2 and below, during version negotiation, if
we received an SSLv2 compat ClientHello but actually wanted to do SSLv3+
then we would construct a "fake" SSLv3+ ClientHello. This "fake" ClientHello
would have its ciphersuite list converted to the SSLv3+ format. It was
this "fake" raw list that got saved away to later be returned by a call to
SSL_get0_raw_cipherlist().
In 1.1.0+ version negotiation works differently and we process an SSLv2
compat ClientHello directly without the need for an intermediary "fake"
ClientHello. This meant that the raw ciphersuite list being saved was in
the SSLv2 format. Any caller of this function would not expect that and
potentially overread the returned buffer by one byte.
Fixes#2189
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2280)
In a non client-auth renegotiation where the original handshake *was*
client auth, then the server will expect the client to send a Certificate
message anyway resulting in a connection failure.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1982)
In a non client-auth renegotiation where the original handshake *was*
client auth, then the client will send a Certificate message anyway
resulting in a connection failure.
Fixes#1920
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1982)
The flag SSL_VERIFY_CLIENT_ONCE is documented as follows:
B<Server mode:> only request a client certificate on the initial TLS/SSL
handshake. Do not ask for a client certificate again in case of a
renegotiation. This flag must be used together with SSL_VERIFY_PEER.
B<Client mode:> ignored
But the implementation actually did nothing. After the server sends its
ServerKeyExchange message, the code was checking s->session->peer to see if
it is NULL. If it was set then it did not ask for another client
certificate. However s->session->peer will only be set in the event of a
resumption, but a ServerKeyExchange message is only sent in the event of a
full handshake (i.e. no resumption).
The documentation suggests that the original intention was for this to
have an effect on renegotiation, and resumption doesn't come into it.
The fix is to properly check for renegotiation, not whether there is already
a client certificate in the session.
As far as I can tell this has been broken for a *long* time.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1982)
The siglen value needs to be initialised prior to it being read in the
call to EVP_DigestSignFinal later in this function.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
TLSv1.3 introduces PSS based sigalgs. Offering these in a TLSv1.3 client
implies that the client is prepared to accept these sigalgs even in
TLSv1.2.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
We had an extra layer of indirection in looking up hashes and sigs based
on sigalgs which is now no longer necessary. This removes it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
In TLSv1.2 an individual sig alg is represented by 1 byte for the hash
and 1 byte for the signature. In TLSv1.3 each sig alg is represented by
two bytes, where the two bytes together represent a single hash and
signature combination. This converts the internal representation of sigalgs
to use a single int for the pair, rather than a pair of bytes.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
This variable represents the index of the cert within the chain, so give it
a name that better represents that.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
We remove the separate CertificateStatus message for TLSv1.3, and instead
send back the response in the appropriate Certificate message extension.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
Also updates TLSProxy to be able to understand the format and parse the
contained extensions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
Continuing from the previous commit we also need to extend the extensions
framework to supply the Certificate we just read during parsing.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
The Certificate message in TLS1.3 has an extensions block for each
Certificate. Therefore we need to extend tls_construct_extensions() to pass
in the certificate we are working on. We also pass in the position in the
chain (with 0 being the first certificate).
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
Previously we were omitting the extension information from ext_defs if
the association no- option was defined. This doesn't work because the
indexes into the table are no longer valid.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2153)
This should be sent in the ServerHello if a EC based ciphersuite is
negotiated. The relevant flag to do this was missed off in the recent
extensions refactor.
Fixes GitHub Issue #2133
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2153)
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Travis was indicating a bogus uninit var warning. This fixes it.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Various functions got renamed. We need to rename the error codes too.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The existing code used the magic number -1 to represent the absence of
a status_type in the extension. This commit replaces it with a macro.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
When we call tls_collect_extensions() we need to free up the raw
extensions data later.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
In TLS1.3 some ServerHello extensions remain in the ServerHello, while
others move to the EncryptedExtensions message. This commit performs that
move.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Because extensions were keyed by type which is sparse, we were continually
scanning the list to find the one we wanted. The way we stored them also
had the side effect that we were running initialisers/finalisers in a
different oder to the parsers. In this commit we change things so that we
instead key on an index value for each extension.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove some functions that are no longer needed now that we have the new
extension framework.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The _clienthello_ in the extensions parsing functions is overly specific.
Better to keep the convention to just _client_
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
This lays the foundation for a later move to have the extensions built and
placed into the correct message for TLSv1.3 (e.g. ServerHello or
EncryptedExtensions).
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Later we will have client extensions code too.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add support for construction of extensions
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
This builds on the work started in 1ab3836b3 and extends is so that
each extension has its own identified parsing functions, as well as an
allowed context identifying which messages and protocols it is relevant for.
Subsequent commits will do a similar job for the ServerHello extensions.
This will enable us to have common functions for processing extension blocks
no matter which of the multiple messages they are received from. In TLSv1.3
a number of different messages have extension blocks, and some extensions
have moved from one message to another when compared to TLSv1.2.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Subsequent commits will pull other extensions code into this file.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
At this stage the message is just empty. We need to fill it in with
extension data.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
