All the other upref functions are spelled as "up_ref". These new functions
should be consistent.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9233)
Augment the cert_cb sslapitest to include a run that uses
SSL_check_chain() to inspect the certificate prior to installing
it on the SSL object. If the check shows the certificate as not
valid in that context, we do not install a certificate at all, so
the handshake will fail later on in processing (tls_choose_sigalg()),
exposing the indicated regression.
Currently it fails, since we have not yet set the shared sigalgs
by the time the cert_cb runs.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9157)
Before the return size was included in the OSSL_PARAM structure, the size
global was updated via a pointer. The size global variable has been removed
and the in structure return size used instead.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9248)
Once there are buildable fips tests, some tests that are data driven
from files will need to be modified to exclude non approved curves in
fips mode.
These changes were tested by temporarily adding #define FIPS_MODE 1 to
all the modified source files.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9081)
This feature is enabled by default outside of FIPS builds
which ban such actions completely.
Encryption is always disallowed and will generate an error.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9112)
Instead of referencing the return size from the OSSL_PARAM structure, make the
size a field within the structure.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9135)
Remove the union that effectively cast thread IDs to long integers before
display and instead print a hex dump of the entire object.
Refer #9191
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9194)
It turned out that the internal trace cleanup handler was added too
late, so it would be executed before OPENSSL_cleanup().
This results in address errors, as the trace code that's executed in
OPENSSL_cleanup() itself tries to reach for data that's been freed at
that point.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9196)
Changed a bad reference: test/Makefile -> test/build.info
Add ../apps/include as include path to include opt.h used by test/testutil.h.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9154)
The BIO_FLAGS_NONCLEAR_RST flag behavior was not properly documented
and it also caused the length to be incorrectly set after the reset
operation.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9179)
If a test program goes wrong, it's sometimes helpful to be able to
trace what goes on in libcrypto and libssl.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9191)
The "add error data" functions now append to the current error.
Add a test for this.
Cleanup some of the ERR_put functions.
In the FIPS module, always append "(in the FIPS module)" to any errors.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9181)
This adds the ability to clean up a thread on a per OPENSSL_CTX basis.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9040)
This file information was hidden in config target files, when they
should really be part of build.info like any other file we build
from. With build.info variables, the task became much easier.
We take the opportunity to move apps_init_src and apps_aux_src to
apps/build.info as well, and to clean up apps/build.info.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)
Make sure that the combination of no-ec with no-dh builds successfully.
If neither ec or dh are available then TLSv1.3 is not possible.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9156)
Now that we have TLSv1.3 FFDHE support there is no reason why we should
not allow TLSv1.3 to be used in a no-ec build. This commit enables that
to happen.
It also fixes no-ec which was previously broken.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9156)
The recent TLSv1.3 FFDHE support missed a few OPENSSL_NO_DH guards.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9153)
Including <inttypes.h> caused a windows build failure.
The test is now skipped if strtoimax & strtoumax are not supported.
It does this by checking for a define which is only available if
inttypes.h is not included. The include is done automagically inside e_os2.h.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8986)
The existing code used PKCS5 specifications.
SP800-132 adds the following additional constraints for:
- the range of the key length.
- the minimum iteration count (1000 recommended).
- salt length (at least 128 bits).
These additional constraints may cause errors (in scrypt, and
some PKCS5 related test vectors). To disable the new
constraints use the new ctrl string "pkcs5".
For backwards compatability, the checks are only enabled by
default for fips mode.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8868)
This is in preparation for moving this code inside the FIPS module.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9039)
[skip ci]
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9102)
covID 1445689 Resource leak (in error path)
covID 1445318 Resource leak (in test - minor)
covID 1443705 Unchecked return value (Needed if CRYPTO_atomic_add() was used)
covID 1443691 Resource leak (in app - minor)
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9071)
Move digest code into the relevant providers (fips, default, legacy).
The headers are temporarily moved to be internal, and will be moved
into providers after all external references are resolved. The deprecated
digest code can not be removed until EVP_PKEY (signing) is supported by
providers. EVP_MD data can also not yet be cleaned up for the same reasons.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8763)
Commit c5f7a99645 broke the test framework such that some tests might
fail, but the test framework still gives a PASS result overall.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9056)
Fixes#8923
Found using the openssl cms -resign option.
This uses an alternate path to do the signing which was not adding the required signed attribute
content type. The content type attribute should always exist since it is required is there are
any signed attributes.
As the signing time attribute is always added in code, the content type attribute is also required.
The CMS_si_check_attributes() method adds validity checks for signed and unsigned attributes
e.g. The message digest attribute is a signed attribute that must exist if any signed attributes
exist, it cannot be an unsigned attribute and there must only be one instance containing a single
value.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8944)
This has been long overdue.
Note that this does not join the X509 and X509V3 error modules, that
will be too many macro changes at this stage.
Fixes#8919
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8925)
Rework the test so that it fails far less often.
A number of independent tests are executed and 5% are expected to fail.
The number of such failures follows a binomial distribution which permits
a statistical test a 0.01% expected failure rate.
There is a command line option to enable the stochastic range checking.
It is off by default.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8830)
enabling the 'enable-crypto-mdebug' option and running parameter generation
causes timeouts.
Loading pregenerated params is more suited for these tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9022)
Convert EVP_PKEY Parameters to/from binary.
This wraps the low level i2d/d2i calls for DH,DSA and EC key parameters
in a similar way to Public and Private Keys.
The API's can be used by applications (including openssl apps) that only
want to use EVP_PKEY without needing to access low level key API's.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8903)
Add a few coverage test case.
Fixes#8949
[extended tests]
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8959)
This imports all of the NIST CAVS test vectors for CCM (SP800-38C) and
coverts them for use within evp_test. This commit also adds a script to
convert the .rsp CAVS files into the evp_test format.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8981)
Add the possibility of a property query clause to be optional by preceding
it with a question mark.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8943)
Add ranged checked OSSL_PARAM conversions between the native types. A
conversion is legal only if the given value can be exactly represented
by the target type.
Includes a test case that reads a stanza test case file and verified that param
conversions are processed properly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8733)
X963 KDF is used for CMS ec keyagree Recipient Info.
The X963 KDF that is used by CMS EC Key Agreement has been moved
into a EVP_KDF object. This KDF is almost identical to the the SSKDF
hash variant, so it has been implemented inside the SSKDF code with
its own method table.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8902)
The functions RAND_add() and RAND_seed() provide a legacy API which
enables the application to seed the CSPRNG.
But NIST SP-800-90A clearly mandates that entropy *shall not* be provided
by the consuming application, neither for instantiation, nor for reseeding.
The provided random data will be mixed into the DRBG state as additional
data only, and no entropy will accounted for it.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8722)
This change allows to pass the authentication tag after specifying
the AAD in CCM mode. This is already true for the other two supported
AEAD modes (GCM and OCB) and it seems appropriate to match the
behavior.
GCM and OCB also support to set the tag at any point before the call
to `EVP_*Final`, but this won't work for CCM due to a restriction
imposed by section 2.6 of RFC3610: The tag must be set before
actually decrypting data.
This commit also adds a test case for setting the tag after supplying
plaintext length and AAD.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7243)
This commit adds the SSL_sendfile call, which allows KTLS sockets to
transmit file using zero-copy semantics.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8727)
Conform to other modules which were changed at the last minute and this
discrepancy was not noticed.
Retain "md" as an alias so not to break 3rd party backports/tests scripts.
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8783)
Various core and property related code files used global data. We should
store all of that in an OPENSSL_CTX instead.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8857)
Since commit 137096a7ea it is possible to specify keywords instead
of negative magic numbers for the salt length. This commit replaces
the remaining occurrences of `rsa_pss_saltlen:-3` in the test recipes
by `rsa_pss_saltlen:max`.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8860)
OSSL_provider_init() gets another output parameter, holding a pointer
to a provider side context. It's entirely up to the provider to
define the context and what it's being used for. This pointer is
passed back to other provider functions, typically the provider global
get_params and set_params functions, and also the diverse algorithm
context creators, and of course, the teardown function.
With this, a provider can be instantiated more than once, or be
re-loaded as the case may be, while maintaining instance state.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8848)
Digest stored entropy for CRNG test.
Via the FIPS lab, NIST confirmed:
The CMVP had a chance to discuss this inquiry and we agree that
hashing the NDRNG block does meet the spirit and letter of AS09.42.
However, the CMVP did have a few questions: what hash algorithm would
be used in this application? Is it approved? Is it CAVs tested?
SHA256 is being used here and it will be both approved and CAVs tested.
This means that no raw entropy needs to be kept between RNG seedings, preventing
a potential attack vector aganst the randomness source and the DRBG chains.
It also means the block of secure memory allocated for this purpose is no longer
required.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8790)
With the removal of SSLv2, the s3 structure is always allocated, so
there is little point in having it be an allocated pointer. Collapse
the ssl3_state_st structure into ssl_st and fixup any references.
This should be faster than going through an indirection and due to
fewer allocations, but I'm not seeing any significant performance
improvement; it seems to be within the margin of error in timing.
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7888)
pkey_rsa_copy was missing a field. Test this by repeating the operation
through an EVP_PKEY_CTX_dup copy in evp_test.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8759)
Add a Chi^2 goodness of fit test to empirically provide a degree of confidence
in the uniformity of the output of the random range generation function.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8818)
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8774)
These undocumented functions were never integrated into the EVP layer
and implement the AES Infinite Garble Extension (IGE) mode and AES
Bi-directional IGE mode. These modes were never formally standardised
and usage of these functions is believed to be very small. In particular
AES_bi_ige_encrypt() has a known bug. It accepts 2 AES keys, but only
one is ever used. The security implications are believed to be minimal,
but this issue was never fixed for backwards compatibility reasons.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8710)
Refer to NIST SP 800-90C section 5.4 "Prediction Resistance.l"
This requires the seed sources to be approved as entropy sources, after
which they should be considered live sources as per section 5.3.2 "Live
Entropy Source Availability."
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8647)
This fixes the "verifying the alias" case.
Actually, while working on it, I realized that conceptually we were
testing the 2 different behaviours of `EC_GROUP_check_named_curve()` at
the same time, and actually not in the proper way.
I think it's fair to assume that overwriting the curve name for an
existing group with `NID_undef` could lead to the unexpected behaviour
we were observing and working around.
Thus I decided to separate the lookup test in a dedicated simpler test
that does what the documentation of `EC_GROUP_check_named_curve()`
suggests: the lookup functionality is meant to find a name for a group
generated with explicit parameters.
In case an alternative alias is returned by the lookup instead of the
expected nid, to avoid doing comparisons between `EC_GROUP`s with
different `EC_METHOD`s, the workaround is to retrieve the `ECPARAMETERS`
of the "alias group" and create a new explicit parameters group to use
in `EC_GROUP_cmp()`.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8555)
Setting arbitrary `p`, `a` or `b` with `EC_GROUP_set_curve()` might fail
for some `EC_GROUP`s, depending on the internal `EC_METHOD`
implementation, hence the block of tests verifying that
`EC_GROUP_check_named_curve()` fails when any of the curve parameters is
changed is modified to run only if the previous `EC_GROUP_set_curve()`
call succeeds.
`ERR_set_mark()` and `ERR_pop_to_mark()` are used to avoid littering the
thread error stack with unrelated errors happened during
`EC_GROUP_set_curve()`.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8555)
This commit makes the X509_set_sm2_id to 'set0' behaviour, which means
the memory management is passed to X509 and user doesn't need to free
the sm2_id parameter later. API name also changes to X509_set0_sm2_id.
Document and test case are also updated.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8626)
When the purpose is to pass parameters to a setter function, that
setter function needs to know the size of the data passed. This
remains true for the pointer data types as well.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8703)
OSSL_PARAM_END is a macro that can only be used to initialize an
OSSL_PARAM array, not to assign an array element later on. For
completion, we add an end constructor to facilitate that kind of
assignment.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8704)
Using a byte buffer causes problems for device that don't handle unaligned
reads. Instead use the properly aligned variable that was already pointed at.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8696)
than the update call. The means an earlier error return at the cost of some
duplicated code.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8625)
Fixes no-sm2 (and also no-sm3 and no-ec)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8650)
Since the macro to indicate if the test provider module is available
is local to the test programs, it's better to use a name that isn't
as easily confused with a library feature disabling macro that one
would expect to find in opensslconf.h.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8664)
We reuse test/provider_internal_test.c and test/p_test.c,
and get it loaded one more time via the configuration file
test/provider_internal_test.conf
To support different platform standards regarding module
extensions, we generate test/provider_internal_test.conf
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8549)
Previously, the macro OPENSSL_NO_SHARED was defined of the test/p_test
module wasn't built, but the provider test programs didn't check that
macro. We rename it to OPENSSL_NO_MODULE, since that name describes
the situation more than OPENSSL_NO_SHARED does, and use it.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8623)
While we're at it, sort out inconsistencies with the build of modules:
- not building shared libraries means not building dynamic engines.
However, other modules may still be built.
- not having DSO functionality doesn't mean not to build modules (even
though we can't use them from apps linked with libraries that are
built this way).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8623)
Add a unit-test for ktls receive side.
Change-Id: I890588681d05fba419f644f6d903be6dc83c9ed5
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7848)
The output format now matches coreutils *dgst tools.
[ edited to remove trailing white space ]
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8578)
This follows #8321 which added the SM2 certificate verification feature.
This commit adds some test cases for #8321.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8465)
Refer to FIPS 140-2 section 4.9.2 Conditional Tests for details.
The check is fairly simplistic, being for the entropy sources to not feed
the DRBG the same block of seed material twice in a row. Only the first
DRBG in a chain is subject to this check, latter DRBGs are assumed to be
safely seeded via the earlier DRBGs.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8599)
/usr/include/bits/waitstatus.h includes endian.h under some libc's.
This clashes with the new test header file, so rename the latter.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8600)
