sooner and the programs get built against the shared libraries.
This requires a bit more work. Things like -rpath and the possibility
to still link the programs statically should be included. Some
cleanup is also needed. This will be worked on.
the e-mail address in the DN (i.e., it will go into a certificate
extension only). The new configuration file option 'email_in_dn = no'
has the same effect.
Submitted by: Massimiliano Pala madwolf@openca.org
libdes (which is still used out there) or other des implementations,
the OpenSSL DES functions are renamed to begin with DES_ instead of
des_. Compatibility routines are provided and declared by including
openssl/des_old.h. Those declarations are the same as were in des.h
when the OpenSSL project started, which is exactly how libdes looked
at that time, and hopefully still looks today.
The compatibility functions will be removed in some future release, at
the latest in version 1.0.
New macros SSL[_CTX]_set_msg_callback_arg().
Message callback imlementation for SSL 3.0/TLS 1.0 (no SSL 2.0 yet).
New '-msg' option for 'openssl s_client' and 'openssl s_server'
that enable a message callback that displays all protocol messages.
In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert if
client_version is smaller than the protocol version in use.
Also change ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0
if the client demanded SSL 3.0 but only TLS 1.0 is enabled; then the
client will at least see that alert.
Fix SSL[_CTX]_ctrl prototype (void * instead of char * for generic
pointer).
Add/update some OpenSSL copyright notices.
algorithms present in all loaded ENGINEs. The result is that if any of
those ENGINEs successfully initialises, and the ENGINE_TABLE_FLAG_NOINIT
flag isn't set, then they will always be used (and cached as defaults) in
preference to software implementations. Ie. accidental auto-detection of
acceleration hardware :-)
This change stops all implementations being automatically registered in
"openssl" sub-commands, so that the "setup_engine()" handler in apps.c
controls which ENGINEs are registered for use. A special case has been
added that will revert to this "auto-detect" logic, ie. if the "-engine"
switch is used as;
-engine auto
Show timing parameters and timing functions used.
It looks like some Linuxen have very weird settings for CLK_TCK. I'm
very unsure about this change and will investigate further.
(Working file: progs.h
revision 1.24
date: 2001/02/19 16:06:03; author: levitte; state: Exp; lines: +59 -59
Make all configuration macros available for application by making
sure they are available in opensslconf.h, by giving them names starting
with "OPENSSL_" to avoid conflicts with other packages and by making
sure e_os2.h will cover all platform-specific cases together with
opensslconf.h.
[...])
CRYPTO_set_mem_debug_options() instead of CRYPTO_dbg_set_options(),
which is the default implementation of the former and should usually
not be directly used by applications (at least if we assume that the
options accepted by the default implementation will also be meaningful
to any other implementations).
Also fix apps/openssl.c and ssl/ssltest such that environment variable
setting 'OPENSSL_DEBUG_MEMORY=off' actively disables the compiled-in
library defaults (i.e. such that CRYPTO_MDEBUG is ignored in this
case).
See the commit log message for that for more information.
NB: X509_STORE_CTX's use of "ex_data" support was actually misimplemented
(initialisation by "memset" won't/can't/doesn't work). This fixes that but
requires that X509_STORE_CTX_init() be able to handle errors - so its
prototype has been changed to return 'int' rather than 'void'. All uses of
that function throughout the source code have been tracked down and
adjusted.
things), especially as the RSA keys are fixed. However, DSA only fixes the
DSA parameters and then generates the public and private components on the
fly each time - this commit hard-codes some sampled key values so that this
is no longer the case.
SSL according to RFC 2712. His comment is:
This is a patch to openssl-SNAP-20010702 to support Kerberized SSL
authentication. I'm expecting to have the full kssl-0.5 kit up on
sourceforge by the end of the week. The full kit includes patches
for mod-ssl, apache, and a few text clients. The sourceforge URL
is http://sourceforge.net/projects/kssl/ .
Thanks to a note from Simon Wilkinson I've replaced my KRB5 AP_REQ
message with a real KerberosWrapper struct. I think this is fully
RFC 2712 compliant now, including support for the optional
authenticator field. I also added openssl-style ASN.1 macros for
a few Kerberos structs; see crypto/krb5/ if you're interested.
Add new extension functions which work with NCONF.
Tidy up extension config routines and remove redundant code.
Fix NCONF_get_number().
Todo: more testing of apps to see they still work...
to go the monolith way (does anyone do that these days?).
NOTE: a few applications are missing in this commit. I've a few more
changes in them that I haven't tested yet.
applications to use EVP. Add missing calls to HMAC_cleanup() and
don't assume HMAC_CTX can be copied using memcpy().
Note: this is almost identical to the patch submitted to openssl-dev
by Verdon Walker <VWalker@novell.com> except some redundant
EVP_add_digest_()/EVP_cleanup() calls were removed and some changes
made to avoid compiler warnings.
string (some engines may have certificates protected by a PIN!) and
a description to put into error messages.
Also, have our own password callback that we can send both a password
and some prompt info to. The default password callback in EVP assumes
that the passed parameter is a password, which isn't always the right
thing, and the ENGINE code (at least the nCipher one) makes other
assumptions...
Also, in spite of having the functions to load keys, some utilities
did the loading all by themselves... That's changed too.
ENGINE.
* Extra verbosity can be added with more "v"'s, eg. '-vvv' gives
information about input flags and descriptions for each control command
in each ENGINE. Check the output of "openssl engine -vvv" for example.
* '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on
the specified ENGINE (or on all of them if no engine id is specified,
although that usually gets pretty ugly). '-post' commands are only
attempted if '-t' is specified and the engine successfully initialises.
'-pre' commands are always attempted whether or not '-t' causes an
initialisation to be tried afterwards. Multiple '-pre' and/or '-post'
commands can be specified and they will be called in the order they
occur on the command line.
Parameterised commands (the normal case, there are currently no
unparameterised ones) are split into command and argument via a separating
colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in
the call;
ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0);
Application code should similarly allow arbitrary name-value string pairs
to be passed into ENGINEs in a manner matching that in apps/engine.c,
either using the same colon-separated format, or entered as two distinct
strings. Eg. as stored in a registry. The last parameter of
ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should
only be attempted if it's supported by the specified ENGINE (eg. for
commands like "FORK_CHECK:1" that may or may not apply to the run-time
ENGINE).
the 'ca' utility. This can now be extensively
customised in the configuration file and handles
multibyte strings and extensions properly.
This is required when extensions copying from
certificate requests is supported: the user
must be able to view the extensions before
allowing a certificate to be issued.
sets the subject name for a new request or supersedes the
subject name in a given request.
Add options '-batch' and '-verbose' to 'openssl req'.
Submitted by: Massimiliano Pala <madwolf@hackmasters.net>
Reviewed by: Bodo Moeller
and make all files the depend on it include it without prefixing it
with openssl/.
This means that all Makefiles will have $(TOP) as one of the include
directories.
of session IDs. Namely, passing "-id_prefix <text>" will set a
generate_session_id() callback that generates session IDs as random data
with <text> block-copied over the top of the start of the ID. This can be
viewed by watching the session ID s_client's output when it connects.
This is mostly useful for testing any SSL/TLS code (eg. proxies) that wish
to deal with multiple servers, when each of which might be generating a
unique range of session IDs (eg. with a certain prefix).
sure they are available in opensslconf.h, by giving them names starting
with "OPENSSL_" to avoid conflicts with other packages and by making
sure e_os2.h will cover all platform-specific cases together with
opensslconf.h.
I've checked fairly well that nothing breaks with this (apart from
external software that will adapt if they have used something like
NO_KRB5), but I can't guarantee it completely, so a review of this
change would be a good thing.
Remove the old broken bio read of serial numbers in the 'ca' index
file. This would choke if a revoked certificate was specified with
a negative serial number.
Fix typo in uid.c
Make ca.c correctly initialize the revocation date.
Make ASN1_UTCTIME_set_string() and ASN1_GENERALIZEDTIME_set_string() set the
string type: so they can initialize ASN1_TIME structures properly.
client code certificates to use to only check response signatures.
I'm not entirely sure if the way I just implemented the verification
is the right way to do it, and would be happy if someone would like to
review this.
OCSP requests. It can also query reponders and parse or
print out responses.
Still needs some more work: OCSP response checks and
of course documentation.
horrible macros.
Fix two evil ASN1 bugs. Attempt to use 'ctx' when
NULL if input is indefinite length constructed
in asn1_check_tlen() and invalid pointer to ASN1_TYPE
when reusing existing structure (this took *ages* to
find because the new PKCS#12 code triggered it).
functions need to be constified, and therefore meant a number of easy
changes a little everywhere.
Now, if someone could explain to me why OBJ_dup() cheats...
DECLARE/IMPLEMENT macros now exist to create type (and prototype) safe
wrapper functions that avoid the use of function pointer casting yet retain
type-safety for type-specific callbacks. However, most of the usage within
OpenSSL itself doesn't really require the extra function because the hash
and compare callbacks are internal functions declared only for use by the
hash table. So this change catches all those cases and reimplements the
functions using the base-level LHASH prototypes and does per-variable
casting inside those functions to convert to the appropriate item type.
The exception so far is in ssl_lib.c where the hash and compare callbacks
are not static - they're exposed in ssl.h so their prototypes should not be
changed. In this last case, the IMPLEMENT_LHASH_*** macros have been left
intact.
