A BIO_flush call in the DTLS code was not correctly setting the |rwstate|
variable to SSL_WRITING. This means that SSL_get_error() will not return
SSL_ERROR_WANT_WRITE in the event of an IO retry.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If using DTLS and NBIO then if a second or subsequent handshake message
fragment hits a retry, then the retry attempt uses the wrong fragment
offset value. This commit restores the fragment offset from the last
attempt.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If the call to OBJ_find_sigid_by_algs fails to find the relevant NID then
we should set the NID to NID_undef.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add new flag TLS1_FLAGS_RECEIVED_EXTMS which is set when the peer sends
the extended master secret extension.
Server now sends extms if and only if the client sent extms.
Check consistency of extms extension when resuming sessions following (where
practical) RFC7627.
Reviewed-by: Matt Caswell <matt@openssl.org>
This change required some special treatment, as HMAC is intertwined
with EVP_MD. For now, all local HMAC_CTX variables MUST be
initialised with HMAC_CTX_EMPTY, or whatever happens to be on the
stack will be mistaken for actual pointers to EVP_MD_CTX. This will
change as soon as HMAC_CTX becomes opaque.
Also, since HMAC_CTX_init() can fail now, its return type changes from
void to int, and it will return 0 on failure, 1 on success.
Reviewed-by: Rich Salz <rsalz@openssl.org>
SSL_{CTX}_set_tmp_ecdh() allows to set 1 EC curve and then tries to use it. On
the other hand SSL_{CTX_}set1_curves() allows you to set a list of curves, but
only when SSL_{CTX_}set_ecdh_auto() was called to turn it on.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
This only gets used to set a specific curve without actually checking that the
peer supports it or not and can therefor result in handshake failures that can
be avoided by selecting a different cipher.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
The new state machine code missed an allowed transition when resuming a
session via EAP FAST. This commits adds the missing check for the
transition.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Remove sign/verify and required_pkey_type fields of EVP_MD: these are a
legacy from when digests were linked to public key types. All signing is
now handled by the corresponding EVP_PKEY_METHOD.
Only allow supported digest types in RSA EVP_PKEY_METHOD: other algorithms
already block unsupported types.
Remove now obsolete EVP_dss1() and EVP_ecdsa().
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add CRYPTO_free_ex_index (for shared libraries)
Unify and complete the documentation for all "ex_data" API's and objects.
Replace xxx_get_ex_new_index functions with a macro.
Added an exdata test.
Renamed the ex_data internal datatypes.
Reviewed-by: Matt Caswell <matt@openssl.org>
Don't hard code EVP_sha* etc for signature algorithms: use table
indices instead. Add SHA224 and SHA512 to tables.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Change handshake hash array into a single digest context simplifying the
handhake hash code. Use EVP_md5_sha1() if needed for handshake hashes in
TLS 1.1 and earlier.
Simplify PRF code to also use a single digest and treat EVP_md5_sha1()
as a special case.
Modify algorithm2 field of ciphers to use a single index value for handshake
hash and PRF instead of a bitmap.
Reviewed-by: Matt Caswell <matt@openssl.org>
If somewhere in SSL_new() there is a memory allocation failure, ssl3_free() can
get called with s->s3 still being NULL.
Patch also provided by Willy Tarreau <wtarreau@haproxy.com>
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Viktor Dukhovni <openssl-users@dukhovni.org>
This patch contains the necessary changes to provide GOST 2012
ciphersuites in TLS. It requires the use of an external GOST 2012 engine.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Though the callers check the function return value and ignore the
size_t output argument on failure, it is still often not ideal to
store (-1) in size_t on error. That might signal an unduly large
buffer. Instead set the size_t to 0, to indicate no space.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Initial API implemented for notifying applications that an ASYNC_JOB
has completed. Currently only s_server is using this. The Dummy Async
engine "cheats" in that it notifies that it has completed *before* it
pauses the job. A normal async engine would not do that.
Only the posix version of this has been implemented so far, so it will
probably fail to compile on Windows at the moment.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Removed the function ASYNC_job_is_waiting() as it was redundant. The only
time user code has a handle on a job is when one is waiting, so all they
need to do is check whether the job is NULL. Also did some cleanups to
make sure the job really is NULL after it has been freed!
Reviewed-by: Rich Salz <rsalz@openssl.org>
The following entry points have been made async aware:
SSL_accept
SSL_read
SSL_write
Also added is a new mode - SSL_MODE_ASYNC. Calling the above functions with
the async mode enabled will initiate a new async job. If an async pause is
encountered whilst executing the job (such as for example if using SHA1/RSA
with the Dummy Async engine), then the above functions return with
SSL_WANT_ASYNC. Calling the functions again (with exactly the same args
as per non-blocking IO), will resume the job where it left off.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There are lots of calls to EVP functions from within libssl There were
various places where we should probably check the return value but don't.
This adds these checks.
Reviewed-by: Richard Levitte <levitte@openssl.org>
A call to X509_verify_cert() is used to build a chain of certs for the
server to send back to the client. It isn't *actually* used for verifying
the cert at all - just building the chain. Therefore the return value is
ignored.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
The |passwd| variable in the code can be NULL if it goes to the err label.
Therefore we cannot call strlen on it without first checking that it is non
NULL.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
This adds a TLSv1.0 cipher alias for ciphersuites requiring
at least TLSv1.0: currently only PSK ciphersuites using SHA256
or SHA384 MAC (SSLv3 only supports SHA1 and MD5 MAC).
Reviewed-by: Matt Caswell <matt@openssl.org>
This disables some ciphersuites which aren't supported in SSL v3:
specifically PSK ciphersuites which use SHA256 or SHA384 for the MAC.
Thanks to the Open Crypto Audit Project for identifying this issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
The new function SSL_use_certificate_chain_file was always crashing in
the internal function use_certificate_chain_file because it would pass a
NULL value for SSL_CTX *, but use_certificate_chain_file would
unconditionally try to dereference it.
Reviewed-by: Stephen Henson <steve@openssl.org>
The function tls1_get_curvelist() has an explicit check to see if s->cert
is NULL or not. However the check appears *after* calling the tls1_suiteb
macro which derefs s->cert. In reality s->cert can never be NULL because
it is created in SSL_new(). If the malloc fails then the SSL_new call fails
and no SSL object is created.
Reviewed-by: Tim Hudson <tjh@openssl.org>
if we have a malloc |x = OPENSSL_malloc(...)| sometimes we check |x|
for NULL and sometimes we treat it as a boolean |if(!x) ...|. Standardise
the approach in libssl.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
The SSL object was being deref'd and then there was a later redundant check
to see if it is NULL. We assume all SSL_foo functions pass a non NULL SSL
object and do not check it.
Reviewed-by: Tim Hudson <tjh@openssl.org>
We were setting |s->renegotiate| and |s->new_session| to 0 twice in
tls_finish_handshake. This is redundant so now we just do it once!
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
We finish the handshake when we move into the TLS_ST_OK state. At various
points we were also unnecessarily finishing it when we were reading/writing
the Finished message. It's much simpler just to do it in TLS_ST_OK, so
remove the other calls.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Rebuild error source files: the new mkerr.pl functionality will now
pick up and translate static function names properly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
A buggy application that call SSL_write with a different length after a
NBIO event could cause an OPENSSL_assert to be reached. The assert is not
actually necessary because there was an explicit check a little further
down that would catch this scenario. Therefore remove the assert an move
the check a little higher up.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This OPENSSL_assert in (d)tls1_hearbeat is trivially always going to be
true because it is testing the sum of values that have been set as
constants just a few lines above and nothing has changed them. Therefore
remove this.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There were a few remaining references to SSLv2 support which are no longer
relevant now that it has been removed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
There was a discrepancy between what ciphersuites we allowed to send a
CertificateRequest, and what ciphersuites we allowed to receive one. So
add PSK and SRP to the disallowed ones.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Some functions were marked as inline in statem_srvr.c where they probably
didn't need to be, so remove it.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
|tls_process_finished| was checking that |peer_finish_md_len| was
non-negative. However neither |tls1_final_finish_mac| or
|ssl3_final_finish_mac| can ever return a negative value, so the check is
superfluous.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Due the rest of the state machine changes it makes sense to change the
SSL_state_string return strings from 3* to T*. They are not SSL3 specific
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
There was a few uses of snprintf in the DTLS SCTP code which made more
sense to be a memcpy.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add the ossl_statem prefix to various funtions to avoid name clashes.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Various enums were introduced as part of the state machine rewrite. As a
matter of style it is preferred for these to be typedefs.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The function dtls1_link_min_mtu() was only used within d1_lib.c so make
it static.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Clang with --strict-warnings was complaining about an uninitalised
variable. In reality it will never be used uninitialised but clang can't
figure out the logic, so just init it anyway to silence the warning.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rebasing the state machine code introduced a problem with empty
NewSessionTicket processing. The return value from the
tls_process_new_session_ticket() is supposed to be an enum, but a bare
integer was being used. Unfortunately this is valid C so the compiler
doesn't pick it up.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix another instance of |al| being unitialised in certain error scenarios.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
A number of error codes were wrong due to a rebase of the state machine
code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The SSL variable |in_handshake| seems misplaced. It would be better to have
it in the STATEM structure.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
tls_process_client_hello() failed to initialise the |al| variable in some
(error) scenarios. This could cause issues with creating the alert.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Adding the new state machine broke the DTLSv1_listen code because
calling SSL_in_before() was erroneously returning true after DTLSv1_listen
had successfully completed. This change ensures that SSL_in_before returns
false.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove repeated blocks of checking SSL and then SSL_CTX for the
info_callback.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
SSL_state has been replaced by SSL_get_state and SSL_set_state is no longer
supported.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The |no_cert_verify| should be in the state machine structure not in SSL
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Change various state machine functions to use the prefix ossl_statem
instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rename the enum HANDSHAKE_STATE to OSSL_HANDSHAKE_STATE to ensure there are
no namespace clashes, and convert it into a typedef.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fixed some issues in the logic for determining whether an SKE should be
expected or not. In particular only allow an SKE for RSA if its export and
the key size is not allowed. Also fix the ephemeral ciphersuite checks and
add in a missing call to ssl3_check_cert_and_algorithm().
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix an out of date reference to old state machine code in a comment
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The next_state variable is no longer needed in the new state machine.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add some documentation on the thinking behind the state machine.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Move some function definitions around within the state machine to make sure
they are in the correct files. Also create a statem_locl.h header for stuff
entirely local to the state machine code and move various definitions into
it.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Pull out the state machine into a separate sub directory. Also moved some
functions which were nothing to do with the state machine but were in state
machine files. Pulled all the SSL_METHOD definitions into one place...most
of those files had very little left in them any more.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
ssl_get_message is no longer used so it should be removed from
ssl_method_st
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Previously each message specific process function would create its own
PACKET structure. Rather than duplicate all of this code lots of times we
should create it in the state machine itself.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The SSL structure contained a "state" variable that kept track of the state
machine in the old code. The new state machine does not use this so it can
be removed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The SSL structure contained a "type" variable that was set to either
SSL_ST_ACCEPT or SSL_ST_CONNECT depending on whether we are the server or
the client. This duplicates the capability of the "server" variable and was
actually rarely used.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The DTLSv1_listen code set the state value explicitly to move into init.
Change to use state_set_in_init() instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
ssl.h and ssl3.h have a number of defines for the various states in the old
state machine code. Since this is public API it is not desirable to just
remove them. Instead redefine them to the closest equivalent state in the
new state machine code. If an application calls SSL_state then the return
value can still be compared against these old values if necessary. However
not all values have an equivalent state in the new code, so these are just
redefined to a dummy value.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Clean up and remove lots of code that is now no longer needed due to the
move to the new state machine.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Implement all of the necessary changes to make DTLS on the server work
with the new state machine code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Implement all of the necessary changes for moving TLS server side
processing into the new state machine code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Split the TLS server ssl3_get_* and ssl3_send_* functions into two ready
for the migration to the new state machine code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove all the functions and dead code that is now no longer required as
a result of the DTLS client move into the new state machine code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Move all DTLS client side processing into the new state machine code. A
subsequent commit will clean up the old dead code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Create a dtls_get_message function similar to the old dtls1_get_message but
in the format required for the new state machine code. The old function will
eventually be deleted in later commits.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove redundant code following moving client side TLS handling to the new
state machine implementation.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
This swaps the implementation of the client TLS state machine to use the
new state machine code instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The new state machine code will split up the reading and writing of
hanshake messages into discrete phases. In order to facilitate that the
existing "get" type functions will be split into two halves: one to get
the message and one to process it. The "send" type functions will also have
all work relating to constructing the message split out into a separate
function just for that. For some functions there will also be separate
pre and post "work" phases to prepare or update state.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
This is the first drop of the new state machine code.
The rewrite has the following objectives:
- Remove duplication of state code between client and server
- Remove duplication of state code between TLS and DTLS
- Simplify transitions and bring the logic together in a single location
so that it is easier to validate
- Remove duplication of code between each of the message handling functions
- Receive a message first and then work out whether that is a valid
transition - not the other way around (the other way causes lots of issues
where we are expecting one type of message next but actually get something
else)
- Separate message flow state from handshake state (in order to better
understand each)
- message flow state = when to flush buffers; handling restarts in the
event of NBIO events; handling the common flow of steps for reading a
message and the common flow of steps for writing a message etc
- handshake state = what handshake message are we working on now
- Control complexity: only the state machine can change state: keep all
the state changes local to a file
This builds on previous state machine related work:
- Surface CCS processing in the state machine
- Version negotiation rewrite
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The function ssl3_get_message gets a whole message from the underlying bio
and returns it to the state machine code. The new state machine code will
split this into two discrete steps: get the message header and get the
message body. This commit splits the existing function into these two
sub steps to facilitate the state machine implementation.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Change the sanity check in PACKET_buf_init to check for excessive length
buffers, which should catch the interesting cases where len has been cast
from a negative value whilst avoiding any undefined behaviour.
RT#4094
Reviewed-by: Richard Levitte <levitte@openssl.org>
Note that this commit constifies a user callback parameter and therefore
will break compilation for applications using this callback. But unless
they are abusing write access to the buffer, the fix is trivial.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The function ssl_check_for_safari fingerprints the incoming extensions
to see whether it is one of the broken versions of safari. However it was
failing to reset the PACKET back to the same position it started in, hence
causing some extensions to be skipped incorrectly.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
The user callback takes a non-const pointer, so don't pass PACKET data
to it directly; rather, grab a local copy.
Reviewed-by: Matt Caswell <matt@openssl.org>
Move all packet parsing to the beginning of the method. This limits the
SSLv2 compatibility soup to the parsing, and makes the rest of the
processing uniform.
This is also needed for simpler EMS support: EMS servers need to do an
early scan for EMS to make resumption decisions. This'll be easier when
the entire ClientHello is parsed in the beginning.
As a side effect,
1) PACKETize ssl_get_prev_session and tls1_process_ticket; and
2) Delete dead code for SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG.
Reviewed-by: Matt Caswell <matt@openssl.org>
This patch updates the "DEFAULT" cipherstring to be
"ALL:!COMPLEMENTOFDEFAULT:!eNULL". COMPLEMENTOFDEFAULT is now defined
internally by a flag on each ciphersuite indicating whether it should be
excluded from DEFAULT or not. This gives us control at an individual
ciphersuite level as to exactly what is in DEFAULT and what is not.
Finally all DES, RC4 and RC2 ciphersuites are added to COMPLEMENTOFDEFAULT
and hence removed from DEFAULT.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Much related/similar work also done by
Ivan Nestlerode <ivan.nestlerode@sonos.com>
+Replace FILE BIO's with dummy ops that fail.
+Include <stdio.h> for sscanf() even with no-stdio (since the declaration
is there). We rely on sscanf() to parse the OPENSSL_ia32cap environment
variable, since it can be larger than a 'long'. And we don't rely on the
availability of strtoull().
+Remove OPENSSL_stderr(); not used.
+Make OPENSSL_showfatal() do nothing (currently without stdio there's
nothing we can do).
+Remove file-based functionality from ssl/. The function
prototypes were already gone, but not the functions themselves.
+Remove unviable conf functionality via SYS_UEFI
+Add fallback definition of BUFSIZ.
+Remove functions taking FILE * from header files.
+Add missing DECLARE_PEM_write_fp_const
+Disable X509_LOOKUP_hash_dir(). X509_LOOKUP_file() was already compiled out,
so remove its prototype.
+Use OPENSSL_showfatal() in CRYPTO_destroy_dynlockid().
+Eliminate SRP_VBASE_init() and supporting functions. Users will need to
build the verifier manually instead.
+Eliminate compiler warning for unused do_pk8pkey_fp().
+Disable TEST_ENG_OPENSSL_PKEY.
+Disable GOST engine as is uses [f]printf all over the place.
+Eliminate compiler warning for unused send_fp_chars().
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
RFC 5077 section 3.3 says:
If the server determines that it does not want to include a
ticket after it has included the SessionTicket extension in the
ServerHello, then it sends a zero-length ticket in the
NewSessionTicket handshake message.
Previously the client would fail upon attempting to allocate a
zero-length buffer. Now, we have the client ignore the empty ticket and
keep the existing session.
Reviewed-by: Matt Caswell <matt@openssl.org>
Previously you could only set both the default path and file locations
together. This adds the ability to set one without the other.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The old implementation of DTLSv1_listen which has now been replaced still
had a few vestiges scattered throughout the code. This commit removes them.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The existing implementation of DTLSv1_listen() is fundamentally flawed. This
function is used in DTLS solutions to listen for new incoming connections
from DTLS clients. A client will send an initial ClientHello. The server
will respond with a HelloVerifyRequest containing a unique cookie. The
client the responds with a second ClientHello - which this time contains the
cookie.
Once the cookie has been verified then DTLSv1_listen() returns to user code,
which is typically expected to continue the handshake with a call to (for
example) SSL_accept().
Whilst listening for incoming ClientHellos, the underlying BIO is usually in
an unconnected state. Therefore ClientHellos can come in from *any* peer.
The arrival of the first ClientHello without the cookie, and the second one
with it, could be interspersed with other intervening messages from
different clients.
The whole purpose of this mechanism is as a defence against DoS attacks. The
idea is to avoid allocating state on the server until the client has
verified that it is capable of receiving messages at the address it claims
to come from. However the existing DTLSv1_listen() implementation completely
fails to do this. It attempts to super-impose itself on the standard state
machine and reuses all of this code. However the standard state machine
expects to operate in a stateful manner with a single client, and this can
cause various problems.
A second more minor issue is that the return codes from this function are
quite confused, with no distinction made between fatal and non-fatal errors.
Most user code treats all errors as non-fatal, and simply retries the call
to DTLSv1_listen().
This commit completely rewrites the implementation of DTLSv1_listen() and
provides a stand alone implementation that does not rely on the existing
state machine. It also provides more consistent return codes.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Since SSLv3, a CipherSuite is always 2 bytes. The only place where we
need 3-byte ciphers is SSLv2-compatible ClientHello processing.
So, remove the ssl_put_cipher_by_char indirection.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The bookmark API results in a lot of boilerplate error checking that can
be much more easily achieved with a simple struct copy. It also lays the
path for removing the third PACKET field.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Simplify encrypted premaster secret reading by using new methods in the
PACKET API.
Don't overwrite the packet buffer. RSA decrypt accepts truncated
ciphertext with leading zeroes omitted, so it's even possible that by
crafting a valid ciphertext with several leading zeroes, this could
cause a few bytes out-of-bounds write. The write is harmless because of
the size of the underlying message buffer, but nevertheless we shouldn't
write into the packet.
Reviewed-by: Matt Caswell <matt@openssl.org>
For server use a PSK identity hint value in the CERT structure which
is inherited when SSL_new is called and which allows applications to
set hints on a per-SSL basis. The previous version of
SSL_use_psk_identity_hint tried (wrongly) to use the SSL_SESSION structure.
PR#4039
Reviewed-by: Matt Caswell <matt@openssl.org>
Use each once in s3_srvr.c to show how they work.
Also fix a bug introduced in c3fc7eeab8
and made apparent by this change:
ssl3_get_next_proto wasn't updating next_proto_negotiated_len
Reviewed-by: Matt Caswell <matt@openssl.org>
There are many places (nearly 50) where we malloc and then memset.
Add an OPENSSL_zalloc routine to encapsulate that.
(Missed one conversion; thanks Richard)
Also fixes GH328
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix the setup of DTLS1.2 buffers to take account of the Header
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The PACKET should hold a 'const unsigned char*' underneath as well
but the legacy code passes the record buffer around as 'unsigned char*'
(to callbacks, too) so that's a bigger refactor.
Reviewed-by: Matt Caswell <matt@openssl.org>
A DTLS client will abort a handshake if the server attempts to renew the
session ticket. This is caused by a state machine discrepancy between DTLS
and TLS discovered during the state machine rewrite work.
The bug can be demonstrated as follows:
Start a DTLS s_server instance:
openssl s_server -dtls
Start a client and obtain a session but no ticket:
openssl s_client -dtls -sess_out session.pem -no_ticket
Now start a client reusing the session, but allow a ticket:
openssl s_client -dtls -sess_in session.pem
The client will abort the handshake.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Commit 9ceb2426b0 (PACKETise ClientHello) broke session tickets by failing
to detect the session ticket extension in an incoming ClientHello. This
commit fixes the bug.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Enhance the PACKET code readability, and fix a stale comment. Thanks
to Ben Kaduk (bkaduk@akamai.com) for pointing this out.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
This was obsolete in 2001. This is not the same as Gost94 digest.
Thanks to Dmitry Belyavsky <beldmit@gmail.com> for review and advice.
Reviewed-by: Matt Caswell <matt@openssl.org>
When config'd with "sctp" running "make test" causes a seg fault. This is
actually due to the way ssltest works - it dives under the covers and frees
up BIOs manually and so some BIOs are NULL when the SCTP code does not
expect it. The simplest fix is just to add some sanity checks to make sure
the BIOs aren't NULL before we use them.
This problem occurs in master and 1.0.2. The fix has also been applied to
1.0.1 to keep the code in sync.
Reviewed-by: Tim Hudson <tjh@openssl.org>
There are some missing return value checks in the SCTP code. In master this
was causing a compilation failure when config'd with
"--strict-warnings sctp".
Reviewed-by: Tim Hudson <tjh@openssl.org>
If a client receives a ServerKeyExchange for an anon DH ciphersuite with the
value of p set to 0 then a seg fault can occur. This commits adds a test to
reject p, g and pub key parameters that have a 0 value (in accordance with
RFC 5246)
The security vulnerability only affects master and 1.0.2, but the fix is
additionally applied to 1.0.1 for additional confidence.
CVE-2015-1794
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
make errors wants things in a different order to the way things are
currently defined in the header files. The easiest fix is to just let it
reorder it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
--strict-warnings started showing warnings for this today...
Surely an error should be raised if these reads fail?
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Some of the PACKET functions were returning incorrect data. An unfortunate
choice of test data in the unit test was masking the failure.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The move of CCS into the state machine introduced a bug in ssl3_read_bytes.
The value of |recvd_type| was not being set if we are satisfying the request
from handshake fragment storage. This can occur, for example, with
renegotiation and causes the handshake to fail.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Continuing on from the previous commit this moves the processing of DTLS
CCS messages out of the record layer and into the state machine.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The handling of incoming CCS records is a little strange. Since CCS is not
a handshake message it is handled differently to normal handshake messages.
Unfortunately whilst technically it is not a handhshake message the reality
is that it must be processed in accordance with the state of the handshake.
Currently CCS records are processed entirely within the record layer. In
order to ensure that it is handled in accordance with the handshake state
a flag is used to indicate that it is an acceptable time to receive a CCS.
Previously this flag did not exist (see CVE-2014-0224), but the flag should
only really be considered a workaround for the problem that CCS is not
visible to the state machine.
Outgoing CCS messages are already handled within the state machine.
This patch makes CCS visible to the TLS state machine. A separate commit
will handle DTLS.
Reviewed-by: Tim Hudson <tjh@openssl.org>
