Only set the load_crypto_strings_inited to 1 when err_load_crypto_strings_int was called.
This solves the following issue:
- openssl is built with no-err
- load_crypto_strings_inited is set to 1 during the OPENSSL_init_crypto call
- During the cleanup: OPENSSL_cleanup, err_free_strings_int is called because load_crypto_strings_inited == 1
- err_free_strings_int calls do_err_strings_init because it has never been called
- Now do_err_strings_init calls OPENSSL_init_crypto
- But since we are in the cleanup (stopped == 1) this results in an error:
CRYPTOerr(CRYPTO_F_OPENSSL_INIT_CRYPTO, ERR_R_INIT_FAIL);
- which then tries to initialize everything we are trying to clean up: ERR_get_state, ossl_init_thread_start, etc
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1654)
Since dasync isn't installed, and is only ever used as a dynamic
engine, there's no reason to consider it for initialization when
building static engines.
Reviewed-by: Ben Laurie <ben@openssl.org>
The calls we made to it were redundant, as the same initialization is
done later in OPENSSL_init_crypto() anyway.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The ERR_remove_thread_state() API is restored to take a pointer
argument, but does nothing more. ERR_remove_state() is also made into
a no-op. Both functions are deprecated and users are recommended to
use OPENSSL_thread_stop() instead.
Documentation is changed to reflect this.
Reviewed-by: Matt Caswell <matt@openssl.org>
The check_defer() function was used to ensure that EVP_cleanup() was always
called before OBJ_cleanup(). The new cleanup code ensures this so it is
no longer needed.
Remove obj_cleanup() call in OID config module: it is not needed
any more either.
Reviewed-by: Matt Caswell <matt@openssl.org>
There is a preference for suffixes to indicate that a function is internal
rather than prefixes. Note: the suffix is only required to disambiguate
internal functions and public symbols with the same name (but different
case)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
There was a lot of naming inconsistency, so we try and standardise on
one form.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
CONF_modules_free() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
ENGINE_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
OBJ_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
EVP_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
BIO_sock_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
CRYPTO_cleanup_all_ex_data() should not be called expicitly - we should
leave auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
RAND_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
ERR_free_strings() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
COMP_zlib_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
When config'd with "no-async" the ASYNC_NULL implementation is used, so
async symbols still exist. We should still init the NULL implementation so
that when we get the async ctx it is NULL rather than undefined.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Don't have #error statements in header files, but instead wrap
the contents of that file in #ifndef OPENSSL_NO_xxx
This means it is now always safe to include the header file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
mkdef.pl was not detecting no-comp functions. This updates the header file
so that mkdef.pl detects that no-comp applies, and the functions are marked
accordingly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
There are internal dependencies between the various cleanup functions.
This re-orders things to try and get that right.
Reviewed-by: Richard Levitte <levitte@openssl.org>
OBJ_cleanup() doesn't always get called from EVP_cleanup() so needs to be
explicitly called in de-init. Also BIO_sock_cleanup() also needs to be
called.
Reviewed-by: Richard Levitte <levitte@openssl.org>
ENGINE_cleanup calls CRYPTO_free_ex_data and therefore,
CRYPTO_cleanup_all_ex_data - which cleans up the method pointers - must
run after ENGINE_cleanup.
Additionally, don't needlessly initialize the EX_CALLBACKS stack during
e.g. CRYPTO_free_ex_data. The only time this is actually needed is when
reserving the first ex data index. Specifically, since sk_num returns -1
on NULL input, the rest of the code already handles a NULL method stack
correctly.
Reviewed-by: Rich Salz <rsalz@openssl.org>
During auto de-init we were calling ENGINE_cleanup(), and then later
CONF_modules_free(). However the latter function can end up calling
engine code, which can lead to a use of the global_engine_lock after it
has already been freed. Therefore we should swap the calling order of
these two functions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Even if we haven't loaded an engine, we might have set up the
global_engine_lock, so we should still clean up.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Swap the use of CRYPTO_LOCK_INIT in the init code to use the new threading
API mechanism for locking.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The init code was using its own thread local code. Now we have a central
API for it we should use that instead.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The init code was using its own "once" implementation. Now that we have
the new thread API we should use that instead.
Reviewed-by: Richard Levitte <levitte@openssl.org>
1. Cleaned up eventfd handling
2. Reworked socket setup code to allow other algorithms to be added in
future
3. Fixed compile errors for static build
4. Added error to error stack in all cases of ALG_PERR/ALG_ERR
5. Called afalg_aes_128_cbc() from bind() to avoid race conditions
6. Used MAX_INFLIGHT define in io_getevents system call
7. Coding style fixes
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The windows thread stop code was erroneously not just deleting the thread
local variable on thread stop, but also deleting the thread local *key*
(thus removing thread local data for *all* threads in one go!).
Reviewed-by: Rich Salz <rsalz@openssl.org>
When OPENSSL_NO_ASYNC is set, make ASYNC_{un,}block_pause() do nothing.
This prevents md_rand.c from failing to build. Probably better to do it
this way than to wrap every instance in an explicit #ifdef.
A bunch of new socket code got added to a new file crypto/bio/b_addr.c.
Make it all go away if OPENSSL_NO_SOCK is defined.
Allow configuration with no-ripemd, no-ts, no-ui
We use these for the UEFI build.
Also remove the 'Really???' comment from no-err and no-locking. We use
those too.
We need to drop the crypto/engine directory from the build too, and also
set OPENSSL_NO_ENGINE
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
We don't have atexit() in the EDK2 environment. Firmware never exits.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
If init failed we'd like to set an error code to indicate that. But if
init failed then when the error system tries to load its strings its going
to fail again. We could get into an infinite loop. Therefore we just set
a single error the first time around. After that no error is set.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The new init functions can fail if the library has already been stopped. We
should be able to indicate failure with a 0 return value.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The local variable tmp was declared static when it shouldn't be. This
is in the no-threads implementation, and it was immediately initialised
to something else on every invokation of the function so it doesn't break
anything...but still shouldn't be there.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
If you call an explicit deinit when we've not been inited then a seg
fault can occur. We should check that we've been inited before attempting
to deinit.
Reviewed-by: Rich Salz <rsalz@openssl.org>
After the final use of the thread_local_inits_st we should ensure it is
set to NULL, just in case OPENSSL_INIT_thread_stop gets called again and
it tries to use garbage.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This option disables automatic loading of the crypto/ssl error strings in
order to keep statically linked executable file size down
Reviewed-by: Richard Levitte <levitte@openssl.org>
This commit provides the basis and core code for an auto initialisation
and deinitialisation framework for libcrypto and libssl. The intention is
to remove the need (in many circumstances) to call explicit initialise and
deinitialise functions. Explicit initialisation will still be an option,
and if non-default initialisation is needed then it will be required.
Similarly for de-initialisation (although this will be a lot easier since
it will bring all de-initialisation into a single function).
Reviewed-by: Richard Levitte <levitte@openssl.org>
