%disabled_algorithms isn't necessarily initialised with the "algos"
'DEPRECATEDIN_1_1_0' etc. However, we know that @known_algorithms has
them all, so use that to find them instead.
Fixes#5157
(where this was reported)
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5282)
If a module is disablable (i.e. can be configured with 'no-FOO'), the
resulting header file needs to be guarded with a check of the
corresponding OPENSSL_NO_FOO. While this seem fairly innocuous, it
has an impact on the information in util/*.num, generated by mkdef.pl.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5275)
This script kept its own database of disablable algorithms, which is a
maintenance problem, as it's not always perfectly in sync with what
Configure does. However, we do have all the data in configdata.pm,
produced by Configure, so let's use that instead.
Also, make sure to parse the *err.h header files, as they contain
function declarations that might not be present elsewhere.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5157)
Add SSL_verify_client_post_handshake() for servers to initiate PHA
Add SSL_force_post_handshake_auth() for clients that don't have certificates
initially configured, but use a certificate callback.
Update SSL_CTX_set_verify()/SSL_set_verify() mode:
* Add SSL_VERIFY_POST_HANDSHAKE to postpone client authentication until after
the initial handshake.
* Update SSL_VERIFY_CLIENT_ONCE now only sends out one CertRequest regardless
of when the certificate authentication takes place; either initial handshake,
re-negotiation, or post-handshake authentication.
Add 'RequestPostHandshake' and 'RequirePostHandshake' SSL_CONF options that
add the SSL_VERIFY_POST_HANDSHAKE to the 'Request' and 'Require' options
Add support to s_client:
* Enabled automatically when cert is configured
* Can be forced enabled via -force_pha
Add support to s_server:
* Use 'c' to invoke PHA in s_server
* Remove some dead code
Update documentation
Update unit tests:
* Illegal use of PHA extension
* TLSv1.3 certificate tests
DTLS and TLS behave ever-so-slightly differently. So, when DTLS1.3 is
implemented, it's PHA support state machine may need to be different.
Add a TODO and a #error
Update handshake context to deal with PHA.
The handshake context for TLSv1.3 post-handshake auth is up through the
ClientFinish message, plus the CertificateRequest message. Subsequent
Certificate, CertificateVerify, and Finish messages are based on this
handshake context (not the Certificate message per se, but it's included
after the hash). KeyUpdate, NewSessionTicket, and prior Certificate
Request messages are not included in post-handshake authentication.
After the ClientFinished message is processed, save off the digest state
for future post-handshake authentication. When post-handshake auth occurs,
copy over the saved handshake context into the "main" handshake digest.
This effectively discards the any KeyUpdate or NewSessionTicket messages
and any prior post-handshake authentication.
This, of course, assumes that the ID-22 did not mean to include any
previous post-handshake authentication into the new handshake transcript.
This is implied by section 4.4.1 that lists messages only up to the
first ClientFinished.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4964)
The reason to do this is that some output might start with an 'ok',
which TAP catches and takes for TAP output. The TAP compatible way is
to make all output it shouldn't catch look like comments.
We do this by setting the environment variable HARNESS_OSSL_PREFIX
during tests. When that is set, apps/openssl uses BIO_f_linebuffer
and sets its prefix to the content of that environment variable.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5224)
Conceptually, this is a squashed version of:
Revert "Address feedback"
This reverts commit 75551e07bd.
and
Revert "Add CRYPTO_thread_glock_new"
This reverts commit ed6b2c7938.
But there were some intervening commits that made neither revert apply
cleanly, so instead do it all as one shot.
The crypto global locks were an attempt to cope with the awkward
POSIX semantics for pthread_atfork(); its documentation (the "RATIONALE"
section) indicates that the expected usage is to have the prefork handler
lock all "global" locks, and the parent and child handlers release those
locks, to ensure that forking happens with a consistent (lock) state.
However, the set of functions available in the child process is limited
to async-signal-safe functions, and pthread_mutex_unlock() is not on
the list of async-signal-safe functions! The only synchronization
primitives that are async-signal-safe are the semaphore primitives,
which are not really appropriate for general-purpose usage.
However, the state consistency problem that the global locks were
attempting to solve is not actually a serious problem, particularly for
OpenSSL. That is, we can consider four cases of forking application
that might use OpenSSL:
(1) Single-threaded, does not call into OpenSSL in the child (e.g.,
the child calls exec() immediately)
For this class of process, no locking is needed at all, since there is
only ever a single thread of execution and the only reentrancy is due to
signal handlers (which are themselves limited to async-signal-safe
operation and should not be doing much work at all).
(2) Single-threaded, calls into OpenSSL after fork()
The application must ensure that it does not fork() with an unexpected
lock held (that is, one that would get unlocked in the parent but
accidentally remain locked in the child and cause deadlock). Since
OpenSSL does not expose any of its internal locks to the application
and the application is single-threaded, the OpenSSL internal locks
will be unlocked for the fork(), and the state will be consistent.
(OpenSSL will need to reseed its PRNG in the child, but that is
an orthogonal issue.) If the application makes use of locks from
libcrypto, proper handling for those locks is the responsibility of
the application, as for any other locking primitive that is available
for application programming.
(3) Multi-threaded, does not call into OpenSSL after fork()
As for (1), the OpenSSL state is only relevant in the parent, so
no particular fork()-related handling is needed. The internal locks
are relevant, but there is no interaction with the child to consider.
(4) Multi-threaded, calls into OpenSSL after fork()
This is the case where the pthread_atfork() hooks to ensure that all
global locks are in a known state across fork() would come into play,
per the above discussion. However, these "calls into OpenSSL after
fork()" are still subject to the restriction to async-signal-safe
functions. Since OpenSSL uses all sorts of locking and libc functions
that are not on the list of safe functions (e.g., malloc()), this
case is not currently usable and is unlikely to ever be usable,
independently of the locking situation. So, there is no need to
go through contortions to attempt to support this case in the one small
area of locking interaction with fork().
In light of the above analysis (thanks @davidben and @achernya), go
back to the simpler implementation that does not need to distinguish
"library-global" locks or to have complicated atfork handling for locks.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5089)
We don't need to send this extension in normal operation since
we are our own X.509 library, but add some test cases that force
the extension to be sent and exercise our code to process the extension.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5068)
Add a -rsigopt option to the ocsp command that allows signature parameters to be provided for the signing of OCSP responses. The parameters that may be provided to -rsigopt are the same as may be provided to -sigopt in the ca, req, and x509 commands.
This PR also defines a OCSP_basic_sign_ctx() function, which functions in the same way as OCSP_basic_sign(), except that it accepts a EVP_MD_CTX rather than a key and digest. The OCSP_basic_sign_ctx() function is used to implement the -rsigopt option in the ocsp command.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4190)
This enables sending and receiving of the TLSv1.3 cookie on the server side
as appropriate.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4435)
Support added for these two digests, available only via the EVP interface.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5093)
On Windows, we sometimes see a behavior with SO_REUSEADDR where there
remains lingering listening sockets on the same address and port as a
newly created one.
To avoid this scenario, we don't create a new proxy port for each new
client run. Instead, we create one proxy socket when the proxy object
is created, and close it when destroying that object.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5095)
On Windows, we sometimes see a behavior with SO_REUSEADDR where there
remains lingering listening sockets on the same address and port as a
newly created one.
An easy solution is not to use ReuseAddr on Windows.
Thanks Bernd Edlinger for the suggestion.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5103)
On Windows, it seems that doing so in a forked (pseudo-)process
sometimes affects the parent, and thereby hides all the results that
are supposed to be seen by the running test framework (the "ok" and
"not ok" lines).
It turns out that our redirection isn't necessary, as the test
framework seems to swallow it all in non-verbose mode anyway.
It's possible that we did need this at some point, but the framework
has undergone some refinement since then...
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5100)
We use the first we can of the following IO::Socket modules to create
sockets:
- IO::Socket::INET6
- IO::Socket::IP
- IO::Socket::INET
The last of them doesn't support IPv6, so if that's the one available,
we must force the s_client and s_server processes to use IPv4.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5092)
To avoid check failure, make dummy RETURN VALUES sections in the docs
which have no real functions decribed inside...
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4976)
I received this error from a TLSProxy test:
Failed to start up server (localhost,4443): Transport endpoint is not
connected
So, extend the timeout before we give up trying to connect to the server.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5088)
- Avoid creating repeated year ranges <current_year>-<current_year> for
documents which were added in the current year.
- Use extended regular expressions for better readability (less quoting)
- Use a shebang line which is more portable
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5044)
usage: openssl-update-copyright [-h|--help] [file|directory] ...
Updates the year ranges of all OpenSSL copyright statements in the given
files or directories. (Directories are traversed recursively.)
Only copyright statements containing the string 'The OpenSSL Project' are
affected. The copyright time range is adjusted to include the current year.
If only a single year was specified, it is replaced by a time range starting
at that year and ending at the current year. All '(c)' and '(C)' signs are
preserved.
Signed-off-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5027)
Every DRBG now supports automatic reseeding not only after a given
number of generate requests, but also after a specified time interval.
Signed-off-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/4402)
A third shared DRBG is added, the so called master DRBG. Its sole purpose
is to reseed the two other shared DRBGs, the public and the private DRBG.
The randomness for the master DRBG is either pulled from the os entropy
sources, or added by the application using the RAND_add() call.
The master DRBG reseeds itself automatically after a given number of generate
requests, but can also be reseeded using RAND_seed() or RAND_add().
A reseeding of the master DRBG is automatically propagated to the public
and private DRBG. This construction fixes the problem, that up to now
the randomness provided by RAND_add() was added only to the public and
not to the private DRBG.
Signed-off-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/4402)
The new ServerHello format is essentially now the same as the old TLSv1.2
one, but it must additionally include supported_versions. The version
field is fixed at TLSv1.2, and the version negotiation happens solely via
supported_versions.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4701)
Because this also includes handling all sorts of non-object files when
linking a program, shared library or DSO, this also includes allowing
general recognition of files such as .res files (compiled from .rc
files), or .def / .map / .opt files (for export and possibly
versioning of public symbols only).
This does mean that there's a tangible change for all build file
templates: they must now recognise and handle the `.o` extension,
which is used internally to recognise object files internally. This
extension was removed by common.tmpl before this change, but would
mean that the platform specific templates wouldn't know if "foo.map"
was originally "foo.map.o" (i.e. an object file in its own right) or
"foo.map" (an export definition file that should be treated as such,
not as an object file).
For the sake of simplifying things, we also modify util/mkdef.pl to
produce .def (Windows) and .opt (VMS) files that don't need additional
hackery.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4840)
This small change in the Unix template and shared library build
scripts enables building "variant" shared libraries. A "variant"
shared library has a non-default SONAME, and non default symbol
versions. This makes it possible to build (say) an OpenSSL 1.1.0
library that can coexist without conflict in the same process address
space as the system's default OpenSSL library which may be OpenSSL
1.0.2.
Such "variant" shared libraries make it possible to link applications
against a custom OpenSSL library installed in /opt/openssl/1.1 or
similar location, and not risk conflict with an indirectly loaded
OpenSSL runtime that is required by some other dependency.
Variant shared libraries have been fully tested under Linux, and
build successfully on MacOS/X producing variant DYLD names. MacOS/X
Darwin has no symbol versioning, but has a non-flat library namespace.
Variant libraries may therefore support multiple OpenSSL libraries
in the same address space also with MacOS/X, despite lack of symbol
versions, but this has not been verified.
Variant shared libraries are optional and off by default.
Reviewed-by: Richard Levitte <levitte@openssl.org>
* Introduce RSA_generate_multi_prime_key to generate multi-prime
RSA private key. As well as the following functions:
RSA_get_multi_prime_extra_count
RSA_get0_multi_prime_factors
RSA_get0_multi_prime_crt_params
RSA_set0_multi_prime_params
RSA_get_version
* Support EVP operations for multi-prime RSA
* Support ASN.1 operations for multi-prime RSA
* Support multi-prime check in RSA_check_key_ex
* Support multi-prime RSA in apps/genrsa and apps/speed
* Support multi-prime RSA manipulation functions
* Test cases and documentation are added
* CHANGES is updated
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4241)
EVP_PKEY_public_check() and EVP_PKEY_param_check()
Doc and test cases are added
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4647)
Around 138 distinct errors found and fixed; thanks!
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3459)
In earlier 5.1x Perl versions quoting globs works only if there is
white space. If there is none, it's looking for names starting with ".
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4695)
Normally TLSProxy waits for the s_server process to finish before
continuing. However in cases where serverconnects > 1 we need to keep the
s_server process around for a later test so we continue immediately. This
means that TAP test output can end up being printed to stdout at the same
time as s_server is printing stuff. This confuses the test runner and can
cause spurious test failures. This commit introduces a small delay in cases
where serverconnects > 1 in order to give s_server enough time to finish
what it was doing before we continue to the next test.
Fixes#4129
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4660)
SM3 is a secure hash function which is part of the Chinese
"Commercial Cryptography" suite of algorithms which use is
required for certain commercial applications in China.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4616)
* ARIA, SEED, Camellia
* AES-XTS, OCB, CTR
* Key wrap for 3DES, AES
* RC4-MD5 AD
* CFB modes with 1-bit and 8-bit shifts
Split EVP_EncryptInit cipher list to individual man pages.
Consolidate cipher bit-lengths in EVP_EncryptInit cipher list.
Clarify
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4564)
