Adding support for these operations for the EdDSA implementations
makes pkeyutl usable for signing/verifying for these algorithms.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5880)
There are two undocumented DSA parameter generation options available in
the genpkey command line app:
dsa_paramgen_md and dsa_paramgen_q_bits.
These can also be accessed via the EVP API but only by using
EVP_PKEY_CTX_ctrl() or EVP_PKEY_CTX_ctrl_str() directly. There are no
helper macros for these options.
dsa_paramgen_q_bits sets the length of q in bits (default 160 bits).
dsa_paramgen_md sets the digest that is used during the parameter
generation (default SHA1). In particular the output length of the digest
used must be equal to or greater than the number of bits in q because of
this code:
if (!EVP_Digest(seed, qsize, md, NULL, evpmd, NULL))
goto err;
if (!EVP_Digest(buf, qsize, buf2, NULL, evpmd, NULL))
goto err;
for (i = 0; i < qsize; i++)
md[i] ^= buf2[i];
/* step 3 */
md[0] |= 0x80;
md[qsize - 1] |= 0x01;
if (!BN_bin2bn(md, qsize, q))
goto err;
qsize here is the number of bits in q and evpmd is the digest set via
dsa_paramgen_md. md and buf2 are buffers of length SHA256_DIGEST_LENGTH.
buf2 has been filled with qsize bits of random seed data, and md is
uninitialised.
If the output size of evpmd is less than qsize then the line "md[i] ^=
buf2[i]" will be xoring an uninitialised value and the random seed data
together to form the least significant bits of q (and not using the
output of the digest at all for those bits) - which is probably not what
was intended. The same seed is then used as an input to generating p. If
the uninitialised data is actually all zeros (as seems quite likely)
then the least significant bits of q will exactly match the least
significant bits of the seed.
This problem only occurs if you use these undocumented and difficult to
find options and you set the size of q to be greater than the message
digest output size. This is for parameter generation only not key
generation. This scenario is considered highly unlikely and
therefore the security risk of this is considered negligible.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5800)
The GOST engine needs to be loaded before we initialise libssl. Otherwise
the GOST ciphersuites are not enabled. However the SSL conf module must
be loaded before we initialise libcrypto. Otherwise we will fail to read
the SSL config from a config file properly.
Another problem is that an application may make use of both libcrypto and
libssl. If it performs libcrypto stuff first and OPENSSL_init_crypto()
is called and loads a config file it will fail if that config file has
any libssl stuff in it.
This commit separates out the loading of the SSL conf module from the
interpretation of its contents. The loading piece doesn't know anything
about SSL so this can be moved to libcrypto. The interpretation of what it
means remains in libssl. This means we can load the SSL conf data before
libssl is there and interpret it when it later becomes available.
Fixes#5809
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5818)
Fail harshly (in debug builds) when rand_pool_acquire_entropy isn't
delivering the required amount of entropy. In release builds, this
produces an error with details.
We also take the opportunity to modernise the types used.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5857)
This removes some code because we cannot trace the original contributor
to get their agreement for the licence change (original commit e03ddfae).
After this change there will be numerous failures in the test cases until
someone rewrites the missing code.
All *_free functions should accept a NULL parameter. After this change
the following *_free functions will fail if a NULL parameter is passed:
BIO_ACCEPT_free()
BIO_CONNECT_free()
BN_BLINDING_free()
BN_CTX_free()
BN_MONT_CTX_free()
BN_RECP_CTX_free()
BUF_MEM_free()
COMP_CTX_free()
ERR_STATE_free()
TXT_DB_free()
X509_STORE_free()
ssl3_free()
ssl_cert_free()
SSL_SESSION_free()
SSL_free()
[skip ci]
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5757)
Constructed types with a recursive definition (such as can be found in
PKCS7) could eventually exceed the stack given malicious input with
excessive recursion. Therefore we limit the stack depth.
CVE-2018-0739
Credit to OSSFuzz for finding this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There is a requirements of having access to a live entropy source
which we can't do with the default callbacks. If you need prediction
resistance you need to set up your own callbacks that follow the
requirements of NIST SP 800-90C.
Reviewed-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
GH: #5402
This commit adds a new api RAND_DRBG_set_defaults() which sets the
default type and flags for new DRBG instances. See also #5576.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5632)
Fixes#4403
This commit moves the internal header file "internal/rand.h" to
<openssl/rand_drbg.h>, making the RAND_DRBG API public.
The RAND_POOL API remains private, its function prototypes were
moved to "internal/rand_int.h" and converted to lowercase.
Documentation for the new API is work in progress on GitHub #5461.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5462)
Renamed to EVP_PKEY_new_raw_private_key()/EVP_new_raw_public_key() as per
feedback.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5520)
Not all algorithms will support this, since their keys are not a simple
block of data. But many can.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5520)
With the current mechanism, old cipher strings that used to work in 1.1.0,
may inadvertently disable all TLSv1.3 ciphersuites causing connections to
fail. This is confusing for users.
In reality TLSv1.3 are quite different to older ciphers. They are much
simpler and there are only a small number of them so, arguably, they don't
need the same level of control that the older ciphers have.
This change splits the configuration of TLSv1.3 ciphers from older ones.
By default the TLSv1.3 ciphers are on, so you cannot inadvertently disable
them through your existing config.
Fixes#5359
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5392)
Add functions that will do the work of assigning certificate, privatekey
and chain certs to an SSL or SSL_CTX. If no privatekey is given, use the
publickey. This will permit the keys to pass validation for both ECDSA
and RSA. If a private key has already been set for the certificate, it
is discarded. A real private key can be set later.
This is an all-or-nothing setting of these parameters. Unlike the
SSL/SSL_CTX_use_certificate() and SSL/SSL_CTX_use_PrivateKey() functions,
the existing cert or privatekey is not modified (i.e. parameters copied).
This permits the existing cert/privatekey to be replaced.
It replaces the sequence of:
* SSL_use_certificate()
* SSL_use_privatekey()
* SSL_set1_chain()
And may actually be faster, as multiple checks are consolidated.
The private key can be NULL, if so an ENGINE module needs to contain the
actual private key that is to be used.
Note that ECDH (using the certificate's ECDSA key) ciphers do not work
without the private key being present, based on how the private key is
used in ECDH. ECDH does not offer PFS; ECDHE ciphers should be used instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/1130)
Retain open file handle and previous stat data for the CA index
file, enabling detection and index reload (upcoming commit).
Check requirements before entering accept loop.
Reviewed-by: Matt Caswell <matt@openssl.org>
We currently don't support the algorithm from NIST SP 800-90C
10.1.2 to use a weaker DRBG as source
Reviewed-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
GH: #5506
Either files or directories of *.cnf or *.conf files
can be included.
Recursive inclusion of directories is not supported.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5351)
This adds all of the relevant EVP plumbing required to make
X448 and Ed448 work.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/5481)
Add -bind option to s_client application to allow specification of
local address for connection.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5272)
In PR #5295 it was decided that the locking api should remain private
and used only inside libcrypto. However, the locking functions were added
back to `libcrypto.num` by `mkdef.pl`, because the function prototypes
were still listed in `internal/rand.h`. (This header contains functions
which are internal, but shared between libcrypto and libssl.)
This commit moves the prototypes to `rand_lcl.h` and changes the names
to lowercase, following the convention therein. It also corrects an
outdated documenting comment.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5375)
This commit adds three new accessors to the internal DRBG lock
int RAND_DRBG_lock(RAND_DRBG *drbg)
int RAND_DRBG_unlock(RAND_DRBG *drbg)
int RAND_DRBG_enable_locking(RAND_DRBG *drbg)
The three shared DRBGs are intended to be used concurrently, so they
have locking enabled by default. It is the callers responsibility to
guard access to the shared DRBGs by calls to RAND_DRBG_lock() and
RAND_DRBG_unlock().
All other DRBG instances don't have locking enabled by default, because
they are intendended to be used by a single thread. If it is desired,
locking can be enabled by using RAND_DRBG_enable_locking().
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5294)
Add SSL_verify_client_post_handshake() for servers to initiate PHA
Add SSL_force_post_handshake_auth() for clients that don't have certificates
initially configured, but use a certificate callback.
Update SSL_CTX_set_verify()/SSL_set_verify() mode:
* Add SSL_VERIFY_POST_HANDSHAKE to postpone client authentication until after
the initial handshake.
* Update SSL_VERIFY_CLIENT_ONCE now only sends out one CertRequest regardless
of when the certificate authentication takes place; either initial handshake,
re-negotiation, or post-handshake authentication.
Add 'RequestPostHandshake' and 'RequirePostHandshake' SSL_CONF options that
add the SSL_VERIFY_POST_HANDSHAKE to the 'Request' and 'Require' options
Add support to s_client:
* Enabled automatically when cert is configured
* Can be forced enabled via -force_pha
Add support to s_server:
* Use 'c' to invoke PHA in s_server
* Remove some dead code
Update documentation
Update unit tests:
* Illegal use of PHA extension
* TLSv1.3 certificate tests
DTLS and TLS behave ever-so-slightly differently. So, when DTLS1.3 is
implemented, it's PHA support state machine may need to be different.
Add a TODO and a #error
Update handshake context to deal with PHA.
The handshake context for TLSv1.3 post-handshake auth is up through the
ClientFinish message, plus the CertificateRequest message. Subsequent
Certificate, CertificateVerify, and Finish messages are based on this
handshake context (not the Certificate message per se, but it's included
after the hash). KeyUpdate, NewSessionTicket, and prior Certificate
Request messages are not included in post-handshake authentication.
After the ClientFinished message is processed, save off the digest state
for future post-handshake authentication. When post-handshake auth occurs,
copy over the saved handshake context into the "main" handshake digest.
This effectively discards the any KeyUpdate or NewSessionTicket messages
and any prior post-handshake authentication.
This, of course, assumes that the ID-22 did not mean to include any
previous post-handshake authentication into the new handshake transcript.
This is implied by section 4.4.1 that lists messages only up to the
first ClientFinished.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4964)
Conceptually, this is a squashed version of:
Revert "Address feedback"
This reverts commit 75551e07bd.
and
Revert "Add CRYPTO_thread_glock_new"
This reverts commit ed6b2c7938.
But there were some intervening commits that made neither revert apply
cleanly, so instead do it all as one shot.
The crypto global locks were an attempt to cope with the awkward
POSIX semantics for pthread_atfork(); its documentation (the "RATIONALE"
section) indicates that the expected usage is to have the prefork handler
lock all "global" locks, and the parent and child handlers release those
locks, to ensure that forking happens with a consistent (lock) state.
However, the set of functions available in the child process is limited
to async-signal-safe functions, and pthread_mutex_unlock() is not on
the list of async-signal-safe functions! The only synchronization
primitives that are async-signal-safe are the semaphore primitives,
which are not really appropriate for general-purpose usage.
However, the state consistency problem that the global locks were
attempting to solve is not actually a serious problem, particularly for
OpenSSL. That is, we can consider four cases of forking application
that might use OpenSSL:
(1) Single-threaded, does not call into OpenSSL in the child (e.g.,
the child calls exec() immediately)
For this class of process, no locking is needed at all, since there is
only ever a single thread of execution and the only reentrancy is due to
signal handlers (which are themselves limited to async-signal-safe
operation and should not be doing much work at all).
(2) Single-threaded, calls into OpenSSL after fork()
The application must ensure that it does not fork() with an unexpected
lock held (that is, one that would get unlocked in the parent but
accidentally remain locked in the child and cause deadlock). Since
OpenSSL does not expose any of its internal locks to the application
and the application is single-threaded, the OpenSSL internal locks
will be unlocked for the fork(), and the state will be consistent.
(OpenSSL will need to reseed its PRNG in the child, but that is
an orthogonal issue.) If the application makes use of locks from
libcrypto, proper handling for those locks is the responsibility of
the application, as for any other locking primitive that is available
for application programming.
(3) Multi-threaded, does not call into OpenSSL after fork()
As for (1), the OpenSSL state is only relevant in the parent, so
no particular fork()-related handling is needed. The internal locks
are relevant, but there is no interaction with the child to consider.
(4) Multi-threaded, calls into OpenSSL after fork()
This is the case where the pthread_atfork() hooks to ensure that all
global locks are in a known state across fork() would come into play,
per the above discussion. However, these "calls into OpenSSL after
fork()" are still subject to the restriction to async-signal-safe
functions. Since OpenSSL uses all sorts of locking and libc functions
that are not on the list of safe functions (e.g., malloc()), this
case is not currently usable and is unlikely to ever be usable,
independently of the locking situation. So, there is no need to
go through contortions to attempt to support this case in the one small
area of locking interaction with fork().
In light of the above analysis (thanks @davidben and @achernya), go
back to the simpler implementation that does not need to distinguish
"library-global" locks or to have complicated atfork handling for locks.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5089)
The new extension is like signature_algorithms, but only for the
signature *on* the certificate we will present to the peer (the
old signature_algorithms extension is still used for signatures that
we *generate*, i.e., those over TLS data structures).
We do not need to generate this extension, since we are the same
implementation as our X.509 stack and can handle the same types
of signatures, but we need to be prepared to receive it, and use the received
information when selecting what certificate to present.
There is a lot of interplay between signature_algorithms_cert and
signature_algorithms, since both affect what certificate we can
use, and thus the resulting signature algorithm used for TLS messages.
So, apply signature_algorithms_cert (if present) as a filter on what
certificates we can consider when choosing a certificate+sigalg
pair.
As part of this addition, we also remove the fallback code that let
keys of type EVP_PKEY_RSA be used to generate RSA-PSS signatures -- the
new rsa_pss_pss_* and rsa_pss_rsae_* signature schemes have pulled
the key type into what is covered by the signature algorithm, so
we should not apply this sort of compatibility workaround.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5068)
This just adds the various extension functions. More changes will be
required to actually use them.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4435)
EVP_PKEY_asn1_find_str() would search through standard asn1 methods
first, then those added by the application, which EVP_PKEY_asn1_find()
worked the other way around. Also, EVP_PKEY_asn1_find_str() didn't
handle aliases.
This change brings EVP_PKEY_asn1_find_str() closer to EVP_PKEY_asn1_find().
Fixes#5086
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5137)
This is based on RT#3810, which added dedicated modular inversion.
ECDSA verify results improves as well, but not as much.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5001)
The DRGB concept described in NIST SP 800-90A provides for having different
algorithms to generate random output. In fact, the FIPS object module used to
implement three of them, CTR DRBG, HASH DRBG and HMAC DRBG.
When the FIPS code was ported to master in #4019, two of the three algorithms
were dropped, and together with those the entire code that made RAND_DRBG
generic was removed, since only one concrete implementation was left.
This commit restores the original generic implementation of the DRBG, making it
possible again to add additional implementations using different algorithms
(like RAND_DRBG_CHACHA20) in the future.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4998)
The new ServerHello format is essentially now the same as the old TLSv1.2
one, but it must additionally include supported_versions. The version
field is fixed at TLSv1.2, and the version negotiation happens solely via
supported_versions.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4701)
If OPENSSL_init_crypto() hasn't been called yet when ERR_get_state()
is called, it need to be called early, so the base initialization is
done. On some platforms (those who support DSO functionality and
don't define OPENSSL_USE_NODELETE), that includes a call of
ERR_set_mark(), which calls this function again.
Furthermore, we know that ossl_init_thread_start(), which is called
later in ERR_get_state(), calls OPENSSL_init_crypto(0, NULL), except
that's too late.
Here's what happens without an early call of OPENSSL_init_crypto():
=> ERR_get_state():
=> CRYPTO_THREAD_get_local():
<= NULL;
# no state is found, so it gets allocated.
=> ossl_init_thread_start():
=> OPENSSL_init_crypto():
# Here, base_inited is set to 1
# before ERR_set_mark() call
=> ERR_set_mark():
=> ERR_get_state():
=> CRYPTO_THREAD_get_local():
<= NULL;
# no state is found, so it gets allocated!!!!!
=> ossl_init_thread_start():
=> OPENSSL_init_crypto():
# base_inited is 1,
# so no more init to be done
<= 1
<=
=> CRYPTO_thread_set_local():
<=
<=
<=
<= 1
<=
=> CRYPTO_thread_set_local() # previous value removed!
<=
Result: double allocation, and we have a leak.
By calling the base OPENSSL_init_crypto() early, we get this instead:
=> ERR_get_state():
=> OPENSSL_init_crypto():
# Here, base_inited is set to 1
# before ERR_set_mark() call
=> ERR_set_mark():
=> ERR_get_state():
=> OPENSSL_init_crypto():
# base_inited is 1,
# so no more init to be done
<= 1
=> CRYPTO_THREAD_get_local():
<= NULL;
# no state is found, so it gets allocated
# let's assume we got 0xDEADBEEF
=> ossl_init_thread_start():
=> OPENSSL_init_crypto():
# base_inited is 1,
# so no more init to be done
<= 1
<= 1
=> CRYPTO_thread_set_local():
<=
<=
<=
<= 1
=> CRYPTO_THREAD_get_local():
<= 0xDEADBEEF
<= 0xDEADBEEF
Result: no leak.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4913)
Expression '...' is always true.
The 'b->init' variable is assigned values twice successively
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4753)
Follow up from the conversion to use SSLfatal() in the state machine to
clean things up a bit more.
[extended tests]
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4778)
Sometimes at the top level of the state machine code we know we are
supposed to be in a fatal error condition. This commit adds some sanity
checks to ensure that SSLfatal() has been called.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4778)
This avoids taking quadratic time to pretty-print certificates with
excessively large integer fields. Very large integers aren't any more
readable in decimal than hexadecimal anyway, and the i2s_* functions
will parse either form.
Found by libFuzzer.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4790)
* Introduce RSA_generate_multi_prime_key to generate multi-prime
RSA private key. As well as the following functions:
RSA_get_multi_prime_extra_count
RSA_get0_multi_prime_factors
RSA_get0_multi_prime_crt_params
RSA_set0_multi_prime_params
RSA_get_version
* Support EVP operations for multi-prime RSA
* Support ASN.1 operations for multi-prime RSA
* Support multi-prime check in RSA_check_key_ex
* Support multi-prime RSA in apps/genrsa and apps/speed
* Support multi-prime RSA manipulation functions
* Test cases and documentation are added
* CHANGES is updated
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4241)
EVP_PKEY_public_check() and EVP_PKEY_param_check()
Doc and test cases are added
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4647)
Since return is inconsistent, I removed unnecessary parentheses and
unified them.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4541)
Reseeding is handled very differently by the classic RAND_METHOD API
and the new RAND_DRBG api. These differences led to some problems when
the new RAND_DRBG was made the default OpenSSL RNG. In particular,
RAND_add() did not work as expected anymore. These issues are discussed
on the thread '[openssl-dev] Plea for a new public OpenSSL RNG API'
and in Pull Request #4328. This commit fixes the mentioned issues,
introducing the following changes:
- Replace the fixed size RAND_BYTES_BUFFER by a new RAND_POOL API which
facilitates collecting entropy by the get_entropy() callback.
- Don't use RAND_poll()/RAND_add() for collecting entropy from the
get_entropy() callback anymore. Instead, replace RAND_poll() by
RAND_POOL_acquire_entropy().
- Add a new function rand_drbg_restart() which tries to get the DRBG
in an instantiated state by all means, regardless of the current
state (uninstantiated, error, ...) the DRBG is in. If the caller
provides entropy or additional input, it will be used for reseeding.
- Restore the original documented behaviour of RAND_add() and RAND_poll()
(namely to reseed the DRBG immediately) by a new implementation based
on rand_drbg_restart().
- Add automatic error recovery from temporary failures of the entropy
source to RAND_DRBG_generate() using the rand_drbg_restart() function.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4328)
Rewrite the -req-nodes flag from CA.pl (idea from Andy)
Rewrite ERR_string_error_n
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4478)
When an SSL's context is swtiched from a ticket-enabled context to
a ticket-disabled context in the servername callback, no session-id
is generated, so the session can't be resumed.
If a servername callback changes the SSL_OP_NO_TICKET option, check
to see if it's changed to disable, and whether a session ticket is
expected (i.e. the client indicated ticket support and the SSL had
tickets enabled at the time), and whether we already have a previous
session (i.e. s->hit is set).
In this case, clear the ticket-expected flag, remove any ticket data
and generate a session-id in the session.
If the SSL hit (resumed) and switched to a ticket-disabled context,
assume that the resumption was via session-id, and don't bother to
update the session.
Before this fix, the updated unit-tests in 06-sni-ticket.conf would
fail test #4 (server1 = SNI, server2 = no SNI).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/1529)
A new method is added to EVP_PKEY_METH as:
int (*check) (EVP_PKEY_CTX *ctx);
and to EVP_PKEY_ASN1_METHOD as:
int (*pkey_check) (EVP_PKEY_CTX *ctx);
This is used to check the validity of a specific key.
The order of calls is:
EVP_PKEY_check -> pmeth.check -> ameth.pkey_check.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4337)
This allows completely arbitrary passphrases to be entered, including
NUL bytes.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3821)
SNI and ALPN must be set to be consistent with the PSK. Otherwise this is
an error.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3926)
This allows callers to set a mark, and then clear it without removing
the errors. Useful in case an error is encountered that should be
returned up the call stack.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4094)
Add an interface that allows accessing the scrypt KDF as a PKEY_METHOD.
This fixes#4021 (at least for the scrypt portion of the issue).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Stephen Henson <steve@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4026)
Add a new global DRBG for private keys used by RAND_priv_bytes.
Add BN_priv_rand() and BN_priv_rand_range() which use RAND_priv_bytes().
Change callers to use the appropriate BN_priv... function.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4076)
This was previously mistakenly handled as a single error code.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Stephen Henson <steve@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3989)
Changed HKDF to use EVP_PKEY_CTX_md() (review comment of @snhenson) and
introduced more specific error codes (not only indicating *that* some
parameter is missing, but actually *which* one it is).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Stephen Henson <steve@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3989)
HKDF now handles an invalid digest like TLS1-PRF does (i.e., returns
KDF_R_INVALID_DIGEST if the passed digest is not known). Both KDFs now
set the error code KDF_R_UNKNOWN_PARAMETER_TYPE if a type was passed
that is not recognized. This will have the effect of improving debugging
output in case a user uses "openssl pkeyutl -kdf ..." in a wrong way and
result in an actual error code (instead of just "failure" and an empty
error stack).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Stephen Henson <steve@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3989)
Introduce KDF_F_PKEY_HKDF_DERIVE and return the KDF_R_MISSING_PARAMETER
error code when required parameters have not been set. This will make
"openssl pkeyutl -kdf HKDF" return a meaningful error message instead of
simply "Public Key operation error".
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Stephen Henson <steve@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3989)
This symbol was added in commit d33b215b33
but was only used in certain (presumed uncommon) preprocessor conditionals,
as no build failures have been reported yet.
Reported by Balaji Marisetti.
Closes: #4029
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4030)
Ported from the last FIPS release, with DUAL_EC and SHA1 and the
self-tests removed. Since only AES-CTR is supported, other code
simplifications were done. Removed the "entropy blocklen" concept.
Moved internal functions to new include/internal/rand.h.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3789)
