The different apps had the liberty to decide whether they would open their
input and output files in binary mode or not, which could be confusing if
two different apps were handling the same type of file in different ways.
The solution is to centralise the decision of low level file organisation,
and that the apps would use a selection of formats to state the intent of
the file.
Reviewed-by: Tim Hudson <tjh@openssl.org>
When generating a private key, try to make the output file be readable
only by the owner. Put it in CHANGES file since it might be noticeable.
Add "int private" flag to apps that write private keys, and check that it's
set whenever we do write a private key. Checked via assert so that this
bug (security-related) gets fixed. Thanks to Viktor for help in tracing
the code-paths where private keys are written.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The module loading feature got broken a while ago, so restore it, but
have it a bit more explicit this time around.
Reviewed-by: Stephen Henson <steve@openssl.org>
Create app_load_config(), a routine to load config file. Remove the
"always load config" from the main app. Change the places that used to
load config to call the new common routine.
Reviewed-by: Richard Levitte <levitte@openssl.org>
For a local variable:
TYPE *p;
Allocations like this are "risky":
p = OPENSSL_malloc(sizeof(TYPE));
if the type of p changes, and the malloc call isn't updated, you
could get memory corruption. Instead do this:
p = OPENSSL_malloc(sizeof(*p));
Also fixed a few memset() calls that I noticed while doing this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
After the finale, the "real" final part. :) Do a recursive grep with
"-B1 -w [a-zA-Z0-9_]*_free" to see if any of the preceeding lines are
an "if NULL" check that can be removed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
No point in proceeding if you're out of memory. So change
*all* OPENSSL_malloc calls in apps to use the new routine which
prints a message and exits.
Reviewed-by: Richard Levitte <levitte@openssl.org>
There's a new "list" command, which takes a flag to say what
to list. Removing the old hacky commands. Re-ordered some
functions to remove some needless declarations.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This is merges the old "rsalz-monolith" branch over to master. The biggest
change is that option parsing switch from cascasding 'else if strcmp("-foo")'
to a utility routine and somethin akin to getopt. Also, an error in the
command line no longer prints the full summary; use -help (or --help :)
for that. There have been many other changes and code-cleanup, see
bullet list below.
Special thanks to Matt for the long and detailed code review.
TEMPORARY:
For now, comment out CRYPTO_mem_leaks() at end of main
Tickets closed:
RT3515: Use 3DES in pkcs12 if built with no-rc2
RT1766: s_client -reconnect and -starttls broke
RT2932: Catch write errors
RT2604: port should be 'unsigned short'
RT2983: total_bytes undeclared #ifdef RENEG
RT1523: Add -nocert to fix output in x509 app
RT3508: Remove unused variable introduced by b09eb24
RT3511: doc fix; req default serial is random
RT1325,2973: Add more extensions to c_rehash
RT2119,3407: Updated to dgst.pod
RT2379: Additional typo fix
RT2693: Extra include of string.h
RT2880: HFS is case-insensitive filenames
RT3246: req command prints version number wrong
Other changes; incompatibilities marked with *:
Add SCSV support
Add -misalign to speed command
Make dhparam, dsaparam, ecparam, x509 output C in proper style
Make some internal ocsp.c functions void
Only display cert usages with -help in verify
Use global bio_err, remove "BIO*err" parameter from functions
For filenames, - always means stdin (or stdout as appropriate)
Add aliases for -des/aes "wrap" ciphers.
*Remove support for IISSGC (server gated crypto)
*The undocumented OCSP -header flag is now "-header name=value"
*Documented the OCSP -header flag
Reviewed-by: Matt Caswell <matt@openssl.org>
Free up bio_err after memory leak data has been printed to it.
In int_free_ex_data if ex_data is NULL there is nothing to free up
so return immediately and don't reallocate it.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Rename OPENSSL_SYSNAME_xxx to OPENSSL_SYS_xxx
Remove MS_STATIC; it's a relic from platforms <32 bits.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
different options:
"64" The build system will choose /POINTER_SIZE=64=ARGV if
the compiler supports it, otherwise /POINTER_SIZE=64.
"64=" The build system will force /POINTER_SIZE=64.
"64=ARGV" The build system will force /POINTER_SIZE=64=ARGV.
directly in main(). 'if needed' also includes when argv is a 32 bit
pointer in an otherwise 64 bit environment.
* apps/makeapps.com: When using /POINTER_SIZE=64, try to use the additional
=ARGV, but only if it's supported. Fortunately, DCL is very helpful
telling us in this case.
exit() in whatever way works for the intended platform, and define
OPENSSL_EXIT() to have the old meaning (the name is of course because
it's only used in the openssl program)
des_old.h redefines crypt:
#define crypt(b,s)\
DES_crypt((b),(s))
This scheme leads to failure, if header files with the OS's true definition
of crypt() are processed _after_ des_old.h was processed. This is e.g. the
case on HP-UX with unistd.h.
As evp.h now again includes des.h (which includes des_old.h), this problem
only came up after this modification.
Solution: move header files (indirectly) including e_os.h before the header
files (indirectly) including evp.h.
Submitted by:
Reviewed by:
PR:
New macros SSL[_CTX]_set_msg_callback_arg().
Message callback imlementation for SSL 3.0/TLS 1.0 (no SSL 2.0 yet).
New '-msg' option for 'openssl s_client' and 'openssl s_server'
that enable a message callback that displays all protocol messages.
In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert if
client_version is smaller than the protocol version in use.
Also change ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0
if the client demanded SSL 3.0 but only TLS 1.0 is enabled; then the
client will at least see that alert.
Fix SSL[_CTX]_ctrl prototype (void * instead of char * for generic
pointer).
Add/update some OpenSSL copyright notices.
CRYPTO_set_mem_debug_options() instead of CRYPTO_dbg_set_options(),
which is the default implementation of the former and should usually
not be directly used by applications (at least if we assume that the
options accepted by the default implementation will also be meaningful
to any other implementations).
Also fix apps/openssl.c and ssl/ssltest such that environment variable
setting 'OPENSSL_DEBUG_MEMORY=off' actively disables the compiled-in
library defaults (i.e. such that CRYPTO_MDEBUG is ignored in this
case).
Add new extension functions which work with NCONF.
Tidy up extension config routines and remove redundant code.
Fix NCONF_get_number().
Todo: more testing of apps to see they still work...
functions need to be constified, and therefore meant a number of easy
changes a little everywhere.
Now, if someone could explain to me why OBJ_dup() cheats...
DECLARE/IMPLEMENT macros now exist to create type (and prototype) safe
wrapper functions that avoid the use of function pointer casting yet retain
type-safety for type-specific callbacks. However, most of the usage within
OpenSSL itself doesn't really require the extra function because the hash
and compare callbacks are internal functions declared only for use by the
hash table. So this change catches all those cases and reimplements the
functions using the base-level LHASH prototypes and does per-variable
casting inside those functions to convert to the appropriate item type.
The exception so far is in ssl_lib.c where the hash and compare callbacks
are not static - they're exposed in ssl.h so their prototypes should not be
changed. In this last case, the IMPLEMENT_LHASH_*** macros have been left
intact.
be used as the hash/compare callbacks without function pointer casting.
For now, this is just happening in the apps/ directory whilst a few people
check the approach. The rest of the library will be moved across to the
same idea if there's no problems with this.
casts) used in the lhash code are about as horrible and evil as they can
be. For starters, the callback prototypes contain empty parameter lists.
Yuck.
This first change defines clearer prototypes - including "typedef"'d
function pointer types to use as "hash" and "compare" callbacks, as well as
the callbacks passed to the lh_doall and lh_doall_arg iteration functions.
Now at least more explicit (and clear) casting is required in all of the
dependant code - and that should be included in this commit.
The next step will be to hunt down and obliterate some of the function
pointer casting being used when it's not necessary - a particularly evil
variant exists in the implementation of lh_doall.
record-oriented fashion. That means that every write() will write a
separate record, which will be read separately by the programs trying
to read from it. This can be very confusing.
The solution is to put a BIO filter in the way that will buffer text
until a linefeed is reached, and then write everything a line at a
time, so every record written will be an actual line, not chunks of
lines and not (usually doesn't happen, but I've seen it once) several
lines in one record. Voila, BIO_f_linebuffer() is born.
Since we're so close to release time, I'm making this VMS-only for
now, just to make sure no code is needlessly broken by this. After
the release, this BIO method will be enabled on all other platforms as
well.
environment variable OPENSSL_DEBUG_MEMORY (existence is sufficient). At the
same time, it makes sure that CRYPTO_malloc_debug_init() gets expanded some-
where and thereby tested for compilation.
like Malloc, Realloc and especially Free conflict with already existing names
on some operating systems or other packages. That is reason enough to change
the names of the OpenSSL memory allocation macros to something that has a
better chance of being unique, like prepending them with OPENSSL_.
This change includes all the name changes needed throughout all C files.
from MemCheck_start() to CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON)
because that is what applications should use
(MemCheck_start/stop never really worked for applications
unless CRYPTO_MDEBUG was defined both when compiling the library
and when compiling the application, so probably we should
get rid of it).
`openssl' and second, the shortcut symlinks for the `openssl <command>' are no
longer created. This way we have a single and consistent command line
interface `openssl <command>', similar to `cvs <command>'.
Notice, the openssl.cnf, openssl.c and progs.pl files were changed after a
repository copy, i.e. they still contain the complete file history.
