CLA: trivial
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9021)
(cherry picked from commit ea8d07b155)
The documentation of what a X509_LOOKUP implementation must do was
unclear and confusing. Most of all, clarification was needed that it
must store away the found objects in the X509_STORE.
Fixes#8707
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8755)
(cherry picked from commit 19f43f02aa)
This function only returns a status and does not modify the parameter.
Since similar function are already taking const parameters, also
change this function to have a const parameter.
Fixes#8934
CLA: trivial
Signed-off-by: Arne Schwabe <arne@rfc2549.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8945)
(cherry picked from commit c04b66b18d)
This change allows to pass the authentication tag after specifying
the AAD in CCM mode. This is already true for the other two supported
AEAD modes (GCM and OCB) and it seems appropriate to match the
behavior.
GCM and OCB also support to set the tag at any point before the call
to `EVP_*Final`, but this won't work for CCM due to a restriction
imposed by section 2.6 of RFC3610: The tag must be set before
actually decrypting data.
This commit also adds a test case for setting the tag after supplying
plaintext length and AAD.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7243)
(cherry picked from commit 67c81ec311)
CLA: trivial
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8786)
(cherry picked from commit 87930507ff)
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8756)
(cherry picked from commit 6fda11ae5a)
A couple of minor tweaks to match the style introduced in #7854:
- BIO_connect: remove line break to make more grep friendly
- SSL_CTX_new: harmoise the format of the HISTORY section
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 938e82f622)
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8736)
SEE ALSO before HISTORY is the more common pattern in OpenSSL manual
pages and seems to be the prevalent order based on sampling my system
manual pages.
Fixes#8631
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit b5c4bbbe54)
Conflicts:
doc/man3/RAND_DRBG_generate.pod
doc/man3/RAND_DRBG_reseed.pod
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8736)
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 4564e77ae9)
Conflicts:
doc/internal/man3/openssl_ctx_get_data.pod (non-existant)
doc/man3/OPENSSL_s390xcap.pod (non-existant)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8736)
There are some ciphersuites that were introduced in TLSv1.0/TLSv1.1 but
are backwards compatible with SSLv3.
Fixes#8655
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8658)
(cherry picked from commit 69539990a8)
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8447)
(cherry picked from commit 3dcbb6c4a3)
Correctly describe the maximum IV length.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8406)
(cherry picked from commit 27d5631236)
The option is a flag for Options, not a standalone setting.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8292)
(cherry picked from commit 4ac5e43da6)
The original 1.1.1 design was to use SSL_CB_HANDSHAKE_START and
SSL_CB_HANDSHAKE_DONE to signal start/end of a post-handshake message
exchange in TLSv1.3. Unfortunately experience has shown that this confuses
some applications who mistake it for a TLSv1.2 renegotiation. This means
that KeyUpdate messages are not handled properly.
This commit removes the use of SSL_CB_HANDSHAKE_START and
SSL_CB_HANDSHAKE_DONE to signal the start/end of a post-handshake
message exchange. Individual post-handshake messages are still signalled in
the normal way.
This is a potentially breaking change if there are any applications already
written that expect to see these TLSv1.3 events. However, without it,
KeyUpdate is not currently usable for many applications.
Fixes#8069
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8096)
(cherry picked from commit 4af5836b55)
Making this a no-op removes a potential infinite loop than can occur in
some situations.
Fixes#2865
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8167)
(cherry picked from commit ef45aa14c5)
Trim trailing whitespace. It doesn't match OpenSSL coding standards,
AFAICT, and it can cause problems with git tooling.
Trailing whitespace remains in test data and external source.
Backport-of: https://github.com/openssl/openssl/pull/8092
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8134)
When computing the end-point shared secret, don't take the
terminating NULL character into account.
Please note that this fix breaks interoperability with older
versions of OpenSSL, which are not fixed.
Fixes#7956
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7957)
(cherry picked from commit 09d62b336d)
1. In addition to overriding the default application name,
one can now also override the configuration file name
and flags passed to CONF_modules_load_file().
2. By default we still keep going when configuration file
processing fails. But, applications that want to be
strict about initialization errors can now make explicit
flag choices via non-null OPENSSL_INIT_SETTINGS that omit
the CONF_MFLAGS_IGNORE_RETURN_CODES flag (which had so far
been both undocumented and unused).
3. In OPENSSL_init_ssl() do not request OPENSSL_INIT_LOAD_CONFIG
if the options already include OPENSSL_INIT_NO_LOAD_CONFIG.
4. Don't set up atexit() handlers when called with opts equal to
OPENSSL_INIT_BASE_ONLY (this flag should only be used alone).
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7969)
CLA: trivial
Function EVP_PKEY_size has been modified to take a const parameter
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7892)
(cherry picked from commit 47ec2367eb)
While stereotyped repetitions are frowned upon in literature, they
serve a useful purpose in manual pages, because it is easier for
the user to find certain information if it is always presented in
the same way. For that reason, this commit harmonizes the varying
formulations in the HISTORY section about which functions, flags,
etc. were added in which OpenSSL version.
It also attempts to make the pod files more grep friendly by
avoiding to insert line breaks between the symbol names and the
corresponding version number in which they were introduced
(wherever possible). Some punctuation and typographical errors
were fixed on the way.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7854)
CLA: trivial
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7887)
(cherry picked from commit 829800b073)
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7705)
(cherry picked from commit 56bc3ea0a4)
Fix some issues in tls13_hkdf_expand() which impact the above function
for TLSv1.3. In particular test that we can use the maximum label length
in TLSv1.3.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7755)
(cherry picked from commit 0fb2815b87)
And make RSAErr call unconditional.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit e875b0cf2f)
SSL_get_signature_nid() -- local signature algorithm
SSL_get_signature_type_nid() -- local signature algorithm key type
SSL_get_peer_tmp_key() -- Peer key-exchange public key
SSL_get_tmp_key -- local key exchange public key
Aliased pre-existing SSL_get_server_tmp_key(), which was formerly
just for clients, to SSL_get_peer_tmp_key(). Changed internal
calls to use the new name.
Reviewed-by: Matt Caswell <matt@openssl.org>
SSL(_CTX)?_set_client_CA_list() was a server side only function in 1.1.0.
If it was called on the client side then it was ignored. In 1.1.1 it now
makes sense to have a CA list defined for both client and server (the
client now sends it the the TLSv1.3 certificate_authorities extension).
Unfortunately some applications were using the same SSL_CTX for both
clients and servers and this resulted in some client ClientHellos being
excessively large due to the number of certificate authorities being sent.
This commit seperates out the CA list updated by
SSL(_CTX)?_set_client_CA_list() and the more generic
SSL(_CTX)?_set0_CA_list(). This means that SSL(_CTX)?_set_client_CA_list()
still has no effect on the client side. If both CA lists are set then
SSL(_CTX)?_set_client_CA_list() takes priority.
Fixes#7411
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7503)
(cherry picked from commit 9873297900)
Replace ECDH_KDF_X9_62() with internal ecdh_KDF_X9_63()
Signed-off-by: Antoine Salon <asalon@vmware.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/7345)
(cherry picked from commit ffd89124bd)
The example code in EVP_DigestInit.pod generates warnings if users try
to compile it.
[skip ci]
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7362)
(cherry picked from commit 19ac1bf2de)
CLA: trivial
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7356)
(cherry picked from commit 4fef4981f8)
This commit documents the OPENSSL_VERSION_TEXT which is currently
missing in the man page.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7301)
(cherry picked from commit 7c69495712)
The latter causes problems when complex.h is #included.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7233)
(cherry picked from commit 972f67889b)
That function was removed in favour of SSL_set_post_handshake_auth().
Update the docs accordingly.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7139)
The SSL_client_version() function returns the value held in the
legacy_version field of the ClientHello. This is never greater than
TLSv1.2, even if TLSv1.3 later gets negotiated.
Fixes#7079
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7095)
They did not make it clear how the memory management works for the |pctx|
parameter.
Fixes#7037
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7042)
They add a single item, so the names give a false impression of what
they do, making them hard to remember. Better to give them a somewhat
better name.
Fixes#6930
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6931)
Add or update the documentation of the different man pages in relation to TLSv1.3 behaviour.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/6939)
Previously you had to supply "null" as the digest to use EdDSA. This changes
things so that any digest is ignored.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6901)
CLA: trivial
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7021)
We already have SSL_set_post_handshake_auth(). This just adds the SSL_CTX
equivalent.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6938)
Having post handshake auth automatically switched on breaks some
applications written for TLSv1.2. This changes things so that an explicit
function call is required for a client to indicate support for
post-handshake auth.
Fixes#6933.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6938)
CRYPTO_atomic_read was added with intention to read statistics counters,
but readings are effectively indistinguishable from regular load (even
in non-lock-free case). This is because you can get out-dated value in
both cases. CRYPTO_atomic_write was added for symmetry and was never used.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6883)
This here page only documents the callback values 0 to 2, but the
callers of BN_generate_prime_ex() call it with the value 3.
The list of manual pages in the SEE ALSO section was extended with the
output from
git grep BN_GENCB_call.*[3-9]
while in the doc/man3 directory.
Signed-off-by: Beat Bolli <dev@drbeat.li>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6802)
The old numbers where all generated for an 80 bit security level. But
the number should depend on security level you want to reach. For bigger
primes we want a higher security level and so need to do more tests.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
GH: #6075Fixes: #6012
In some circumstances it is possible for a client to have a session
reporting a max early data value that is greater than the server will
support. In such cases the client could encounter an aborted connection.
Fixes#6735
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6740)
These tiny functions only read from the input SSL, and we are
about to use them from functions that only have a const SSL* available,
so propagate const a bit further.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6378)
Change the description for BN_hex2bn() so that it uses the same BIGNUM argument name as its prototype.
CLA: trivial
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6712)
This also adds the ability to control this through s_server
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6469)
Document SSL_OP_NO_ANTI_REPLAY and SSL_CTX_set_allow_early_data_cb()
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6469)
This allows operation inside a chroot environment without having the
random device present.
A new call, RAND_keep_random_devices_open(), has been introduced that can
be used to control file descriptor use by the random seed sources. Some
seed sources maintain open file descriptors by default, which allows
such sources to operate in a chroot(2) jail without the associated device
nodes being available.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6432)
