When compiling with --strict-warnings using gcc 7.4.0 the compiler
complains that a case falls through, even though there is an explicit
comment stating this. Moving the comment outside of the conditional
compilation section resolves this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9131)
(cherry picked from commit a2e520447e)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9123)
(cherry picked from commit e98e586b31)
The lookup for ::1 with getaddrinfo() might return error even if
the ::1 would work if AI_ADDRCONFIG flag is used.
Fixes: #9053
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9108)
(cherry picked from commit 3f91ede9ae)
The DEVRANDOM_WAIT feature added a select() call to wait for the
`/dev/random` device to become readable before reading from the
`/dev/urandom` device. It was introduced in commit 38023b87f0
in order to mitigate the fact that the `/dev/urandom` device
does not block until the initial seeding of the kernel CSPRNG
has completed, contrary to the behaviour of the `getrandom()`
system call.
It turned out that this change had negative side effects on
performance which were not acceptable. After some discussion it
was decided to revert this feature and leave it up to the OS
resp. the platform maintainer to ensure a proper initialization
during early boot time.
Fixes#9078
This partially reverts commit 38023b87f0.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(cherry picked from commit a08714e181)
(Merged from https://github.com/openssl/openssl/pull/9118)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9101)
(cherry picked from commit bab6046146)
The 4 kB SPACE_SYS_STR_REASONS in crypto/err/err.c isn't enough for some locales.
The Russian locales consume 6856 bytes, Ukrainian even 7000.
build_SYS_str_reasons() contains an overflow check:
if (cnt > sizeof(strerror_pool))
cnt = sizeof(strerror_pool);
But since commit 9f15e5b911 it no longer
works as cnt is incremented once more after the condition.
cnt greater than sizeof(strerror_pool) results in an unbounded
OPENSSL_strlcpy() in openssl_strerror_r(), eventually causing a crash.
When the first received error string was empty or contained only
spaces, cur would move in front of the start of the strerror_pool.
Also don't call openssl_strerror_r when the pool is full.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/8966)
(cherry picked from commit fac9200a88)
Fixes#8923
Found using the openssl cms -resign option.
This uses an alternate path to do the signing which was not adding the required signed attribute
content type. The content type attribute should always exist since it is required is there are
any signed attributes.
As the signing time attribute is always added in code, the content type attribute is also required.
The CMS_si_check_attributes() method adds validity checks for signed and unsigned attributes
e.g. The message digest attribute is a signed attribute that must exist if any signed attributes
exist, it cannot be an unsigned attribute and there must only be one instance containing a single
value.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8944)
(cherry picked from commit 19e512a824)
openssl_config_int() returns the uninitialized variable `ret`
when compiled with OPENSSL_SYS_UEFI.
Fixes#9026
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9029)
(cherry picked from commit f4a96507fb)
The #7408 implemented mandatory digest checking in TLS.
However this broke compatibility of DSS support with GnuTLS
which supports only SHA1 with DSS.
There is no reason why SHA256 would be a mandatory digest
for DSA as other digests in SHA family can be used as well.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9015)
(cherry picked from commit cd4c83b524)
Add a few coverage test case.
Fixes#8949
[extended tests]
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8959)
(cherry picked from commit 5b3accde60)
67c81ec311 forgot about s390x
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8971)
(cherry picked from commit 887e22dd8b)
This change allows to pass the authentication tag after specifying
the AAD in CCM mode. This is already true for the other two supported
AEAD modes (GCM and OCB) and it seems appropriate to match the
behavior.
GCM and OCB also support to set the tag at any point before the call
to `EVP_*Final`, but this won't work for CCM due to a restriction
imposed by section 2.6 of RFC3610: The tag must be set before
actually decrypting data.
This commit also adds a test case for setting the tag after supplying
plaintext length and AAD.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7243)
(cherry picked from commit 67c81ec311)
Return error if the output tag buffer size doesn't match
the tag size exactly. This prevents the caller from
using that portion of the tag buffer that remains
uninitialized after an otherwise succesfull call to
CRYPTO_ccm128_tag.
Bug found by OSS-Fuzz.
Fix suggested by Kurt Roeckx.
Signed-off-by: Guido Vranken <guidovranken@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8810)
(cherry picked from commit 514c9da48b)
This happens in ec_key_simple_check_key and EC_GROUP_check.
Since the the group order is not a secret scalar, it is
unnecessary to use coordinate blinding.
Fixes: #8731
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8734)
(cherry picked from commit 3051bf2afa)
Even with custome ciphers, the combination in == NULL && inl == 0
should not be passed down to the backend cipher function. The reason
is that these are the values passed by EVP_*Final, and some of the
backend cipher functions do check for these to see if a "final" call
is made.
Fixes#8675
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8676)
(cherry picked from commit dcb982d792)
'no-dso' is meaningless, as it doesn't get any macro defined.
Therefore, we remove all checks of OPENSSL_NO_DSO. However, there may
be some odd platforms with no DSO scheme. For those, we generate the
internal macro DSO_NONE aand use it.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8622)
If using a custom X509_LOOKUP_METHOD then calls to
X509_STORE_CTX_get_by_subject may crash due to an incorrectly initialised
X509_OBJECT being passed to the callback get_by_subject function.
Fixes#8673
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8698)
(cherry picked from commit b926f9deb3)
It was assumed that the config functionality returned a boolean.
However, it may return a negative number on error, so we need to take
that into account.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8679)
(cherry picked from commit e3af453bac)
This prevents failure of openssl s_server socket binding to wildcard
address on hosts with disabled IPv6.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8550)
(cherry picked from commit b8472b4e67)
I turns out that this made crypto/rand/rand_win.c to never build with
BCrypt support unless the user sets _WIN32_WINNT. That wasn't the
intent.
This reverts commit cc8926ec8f.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8641)
(cherry picked from commit 705a27f7e0)
Revert win32_pathbyaddr() which is used in DSO_dsobyaddr().
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8596)
(cherry picked from commit 9c98aa354d)
Replace it with InitializeCriticalSection()
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8596)
(cherry picked from commit 09305a7d0a)
DH_check is used to test the validity of Diffie-Hellman parameter sets (p, q, g). Among the tests performed are primality tests on p and q, for this BN_is_prime_ex is called with the rounds of Miller-Rabin set as default. This will therefore use the average case error estimates derived from the function BN_prime_checks_for_size based on the bit size of the number tested.
However, these bounds are only accurate on testing random input. Within this testing scenario, where we are checking the validity of a DH parameter set, we can not assert that these parameters are randomly generated. Thus we must treat them as if they are adversarial in nature and increase the rounds of Miller-Rabin performed.
Generally, each round of Miller-Rabin can declare a composite number prime with probability at most (1/4), thus 64 rounds is sufficient in thwarting known generation techniques (even in safe prime settings - see https://eprint.iacr.org/2019/032 for full analysis). The choice of 64 rounds is also consistent with SRP_NUMBER_ITERATIONS_FOR_PRIME 64 as used in srp_Verify_N_and_g in openssl/apps/s_client.c.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8593)
(cherry picked from commit 2500c093aa)
We treat that as automatic success. Other EVP_*Update functions already do
this (e.g. EVP_EncryptUpdate, EVP_DecryptUpdate etc). EVP_EncodeUpdate is
a bit of an anomoly. That treats 0 byte input length as an error.
Fixes#8576
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8587)
(cherry picked from commit a8274ea351)
constant time with a memory access pattern that does not depend
on secret information.
[extended tests]
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8543)
(cherry picked from commit 9c0cf214e7)
Great effort has been made to make initialization more configurable.
However, the behavior of OPENSSL_config() was lost in the process,
having it suddenly generate errors it didn't previously, which is not
how it's documented to behave.
A simple setting of default flags fixes this problem.
Fixes#8528
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8533)
(cherry picked from commit 905c9a72a7)
There are some compiling errors for mips32r6 and mips64r6:
crypto/bn/bn-mips.S:56: Error: opcode not supported on this processor: mips2 (mips2) `mulu $1,$12,$7'
crypto/mips_arch.h: Assembler messages:
crypto/mips_arch.h:15: Error: junk at end of line, first unrecognized character is `&'
Signed-off-by: Hua Zhang <hua.zhang1974@hotmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8464)
(cherry picked from commit 1b9c5f2e2f)
The secret point R can be recovered from S using the equation R = S - P.
The X and Z coordinates should be sufficient for that.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8504)
(cherry picked from commit 8a74bb5c7b)
There are two copy-paste errors in handling CTR mode. When dealing
with a 2 or 3 block tail, the code branches to the CBC decryption exit
path, rather than to the CTR exit path.
This can lead to data corruption: in the Linux kernel we have a copy
of this file, and the bug leads to corruption of the IV, which leads
to data corruption when we call the encryption function again later to
encrypt subsequent blocks.
Originally reported to the Linux kernel by Ondrej Mosnáček <omosnacek@gmail.com>
CLA: trivial
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8510)
(cherry picked from commit f643deac41)
The function felem_diff_128_64 in ecp_nistp521.c substracts the number |in|
from |out| mod p. In order to avoid underflow it first adds 32p mod p
(which is equivalent to 0 mod p) to |out|. The comments and variable naming
suggest that the original author intended to add 64p mod p. In fact it
has been shown that with certain unusual co-ordinates it is possible to
cause an underflow in this function when only adding 32p mod p while
performing a point double operation. By changing this to 64p mod p the
underflow is avoided.
It turns out to be quite difficult to construct points that satisfy the
underflow criteria although this has been done and the underflow
demonstrated. However none of these points are actually on the curve.
Finding points that satisfy the underflow criteria and are also *on* the
curve is considered significantly more difficult. For this reason we do
not believe that this issue is currently practically exploitable and
therefore no CVE has been assigned.
This only impacts builds using the enable-ec_nistp_64_gcc_128 Configure
option.
With thanks to Bo-Yin Yang, Billy Brumley and Dr Liu for their significant
help in investigating this issue.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8405)
(cherry picked from commit 13fbce17fc)
ChaCha20-Poly1305 is an AEAD cipher, and requires a unique nonce input for
every encryption operation. RFC 7539 specifies that the nonce value (IV)
should be 96 bits (12 bytes). OpenSSL allows a variable nonce length and
front pads the nonce with 0 bytes if it is less than 12 bytes. However it
also incorrectly allows a nonce to be set of up to 16 bytes. In this case
only the last 12 bytes are significant and any additional leading bytes are
ignored.
It is a requirement of using this cipher that nonce values are unique.
Messages encrypted using a reused nonce value are susceptible to serious
confidentiality and integrity attacks. If an application changes the
default nonce length to be longer than 12 bytes and then makes a change to
the leading bytes of the nonce expecting the new value to be a new unique
nonce then such an application could inadvertently encrypt messages with a
reused nonce.
Additionally the ignored bytes in a long nonce are not covered by the
integrity guarantee of this cipher. Any application that relies on the
integrity of these ignored leading bytes of a long nonce may be further
affected.
Any OpenSSL internal use of this cipher, including in SSL/TLS, is safe
because no such use sets such a long nonce value. However user
applications that use this cipher directly and set a non-default nonce
length to be longer than 12 bytes may be vulnerable.
CVE-2019-1543
Fixes#8345
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8406)
(cherry picked from commit 2a3d0ee9d5)
GNU strerror_r may return either a pointer to a string that the function
stores in buf, or a pointer to some (immutable) static string in which case
buf is unused.
In such a case we need to set buf manually.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8371)
(cherry picked from commit e3b35d2b29)
Use select to wait for /dev/random in readable state,
but do not actually read anything from /dev/random,
use /dev/urandom first.
Use linux define __NR_getrandom instead of the
glibc define SYS_getrandom, in case the kernel headers
are more current than the glibc headers.
Fixes#8215
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/8251)
(cherry picked from commit 38023b87f0)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8281)
(cherry picked from commit 54d00677f3)
Currently SM2 shares the ameth with EC, so the current default digest
algorithm returned is SHA256. This fixes the default digest algorithm of
SM2 to SM3, which is the only valid digest algorithm for SM2 signature.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8186)
(cherry picked from commit e766f4a053)
This restores the behavior of previous versions of the /dev/crypto
engine, in alignment with the default implementation.
Reported-by: Gerard Looije <lglooije@hotmail.com>
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8306)
cipher_init may be called on an already initialized context, without a
necessary cleanup. This separates cleanup from initialization, closing
an eventual open session before creating a new one.
Move the /dev/crypto session cleanup code to its own function.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8306)
The real cause for this change is that test/ec_internal_test.c
includes ec_lcl.h, and including curve448/curve448_lcl.h from there
doesn't work so well with compilers who always do inclusions relative
to the C file being compiled.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8334)
Thanks to David Benjamin who reported this, performed the analysis and
suggested the patch. I have incorporated some of his analysis in the
comments below.
This issue can cause an out-of-bounds read. It is believed that this was
not reachable until the recent "fixed top" changes. Analysis has so far
only identified one code path that can encounter this - although it is
possible that others may be found. The one code path only impacts 1.0.2 in
certain builds. The fuzzer found a path in RSA where iqmp is too large. If
the input is all zeros, the RSA CRT logic will multiply a padded zero by
iqmp. Two mitigating factors:
- Private keys which trip this are invalid (iqmp is not reduced mod p).
Only systems which take untrusted private keys care.
- In OpenSSL 1.1.x, there is a check which rejects the oversize iqmp,
so the bug is only reproducible in 1.0.2 so far.
Fortunately, the bug appears to be relatively harmless. The consequences of
bn_cmp_word's misbehavior are:
- OpenSSL may crash if the buffers are page-aligned and the previous page is
non-existent.
- OpenSSL will incorrectly treat two BN_ULONG buffers as not equal when they
are equal.
- Side channel concerns.
The first is indeed a concern and is a DoS bug. The second is fine in this
context. bn_cmp_word and bn_cmp_part_words are used to compute abs(a0 - a1)
in Karatsuba. If a0 = a1, it does not matter whether we use a0 - a1 or
a1 - a0. The third would be worth thinking about, but it is overshadowed
by the entire Karatsuba implementation not being constant time.
Due to the difficulty of tripping this and the low impact no CVE is felt
necessary for this issue.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8326)
(cherry picked from commit 576129cd72)
This commit adds a dedicated function in `EC_METHOD` to access a modular
field inversion implementation suitable for the specifics of the
implemented curve, featuring SCA countermeasures.
The new pointer is defined as:
`int (*field_inv)(const EC_GROUP*, BIGNUM *r, const BIGNUM *a, BN_CTX*)`
and computes the multiplicative inverse of `a` in the underlying field,
storing the result in `r`.
Three implementations are included, each including specific SCA
countermeasures:
- `ec_GFp_simple_field_inv()`, featuring SCA hardening through
blinding.
- `ec_GFp_mont_field_inv()`, featuring SCA hardening through Fermat's
Little Theorem (FLT) inversion.
- `ec_GF2m_simple_field_inv()`, that uses `BN_GF2m_mod_inv()` which
already features SCA hardening through blinding.
From a security point of view, this also helps addressing a leakage
previously affecting conversions from projective to affine coordinates.
This commit also adds a new error reason code (i.e.,
`EC_R_CANNOT_INVERT`) to improve consistency between the three
implementations as all of them could fail for the same reason but
through different code paths resulting in inconsistent error stack
states.
Co-authored-by: Nicola Tuveri <nic.tuv@gmail.com>
(cherry picked from commit e0033efc30)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8262)
Cygwin binaries should not enforce text mode these days, just
use text mode if the underlying mount point requests it
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8248)
(cherry picked from commit 9b57e4a1ef)
The add/double shortcut in ecp_nistz256-x86_64.pl left one instruction
point that did not unwind, and the "slow" path in AES_cbc_encrypt was
not annotated correctly. For the latter, add
.cfi_{remember,restore}_state support to perlasm.
Next, fill in a bunch of functions that are missing no-op .cfi_startproc
and .cfi_endproc blocks. libunwind cannot unwind those stack frames
otherwise.
Finally, work around a bug in libunwind by not encoding rflags. (rflags
isn't a callee-saved register, so there's not much need to annotate it
anyway.)
These were found as part of ABI testing work in BoringSSL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
GH: #8109
(cherry picked from commit c0e8e5007b)
CLA: trivial
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8137)
(cherry picked from commit b754a8a159)
ARMv8.3 adds pointer authentication extension, which in this case allows
to ensure that, when offloaded to stack, return address is same at return
as at entry to the subroutine. The new instructions are nops on processors
that don't implement the extension, so that the vetification is backward
compatible.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8205)
(cherry picked from commit 9a18aae5f2)
If the old openssl versions not supporting the .include directive
load a config file with it, they will bail out with error.
This change allows using the .include = <filename> syntax which
is interpreted as variable assignment by the old openssl
config file parser.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8141)
(cherry picked from commit 9d5560331d)
o2i_ECPublicKey() requires an EC_KEY structure filled with an EC_GROUP.
o2i_ECPublicKey() is called by d2i_PublicKey(). In order to fulfill the
o2i_ECPublicKey()'s requirement, d2i_PublicKey() needs to be called with
an EVP_PKEY with an EC_KEY containing an EC_GROUP.
However, the call to EVP_PKEY_set_type() frees any existing key structure
inside the EVP_PKEY, thus freeing the EC_KEY with the EC_GROUP that
o2i_ECPublicKey() needs.
This means you can't d2i_PublicKey() for an EC key...
The fix is to check to see if the type is already set appropriately, and
if so, not call EVP_PKEY_set_type().
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8168)
(cherry picked from commit 2aa2beb06c)
Trim trailing whitespace. It doesn't match OpenSSL coding standards,
AFAICT, and it can cause problems with git tooling.
Trailing whitespace remains in test data and external source.
Backport-of: https://github.com/openssl/openssl/pull/8092
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8134)
If the call the ERR_set_error_data() in ERR_add_error_vdata() fails then
a mem leak can occur. This commit checks that we successfully added the
error data, and if not frees the buffer.
Fixes#8085
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/8105)
(cherry picked from commit fa6b1ee111)
When the ret parameter is NULL the generated prime
is in rnd variable and not in ret.
CLA: trivial
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8076)
(cherry picked from commit 3d43f9c809)
If this fails try out if mfspr268 works.
Use OPENSSL_ppccap=0x20 for enabling mftb,
OPENSSL_ppccap=0x40 for enabling mfspr268,
and OPENSSL_ppccap=0 for enabling neither.
Fixes#8012
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8043)
(cherry picked from commit c8f370485c)
If you use a BIO and set up your own buffer that is not freed, the
memory bio will leak the BIO_BUF_MEM object it allocates.
The trouble is that the BIO_BUF_MEM is allocated and kept around,
but it is not freed if BIO_NOCLOSE is set.
The freeing of BIO_BUF_MEM was fairly confusing, simplify things
so mem_buf_free only frees the memory buffer and free the BIO_BUF_MEM
in mem_free(), where it should be done.
Alse add a test for a leak in the memory bio
Setting a memory buffer caused a leak.
Signed-off-by: Corey Minyard <minyard@acm.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8051)
(cherry picked from commit c6048af23c)
Having a weak getauxval() and only depending on GNU C without looking
at the library we build against meant that it got picked up where not
really expected.
So we change this to check for the glibc version, and since we know it
exists from that version, there's no real need to make it weak.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/8028)
(cherry picked from commit 5f40dd158c)
It turns out that AT_SECURE may be defined through other means than
our inclusion of sys/auxv.h, so to be on the safe side, we define our
own guard and use that to determine if getauxval() should be used or
not.
Fixes#7932
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7933)
(cherry picked from commit aefb980c45)
1. In addition to overriding the default application name,
one can now also override the configuration file name
and flags passed to CONF_modules_load_file().
2. By default we still keep going when configuration file
processing fails. But, applications that want to be
strict about initialization errors can now make explicit
flag choices via non-null OPENSSL_INIT_SETTINGS that omit
the CONF_MFLAGS_IGNORE_RETURN_CODES flag (which had so far
been both undocumented and unused).
3. In OPENSSL_init_ssl() do not request OPENSSL_INIT_LOAD_CONFIG
if the options already include OPENSSL_INIT_NO_LOAD_CONFIG.
4. Don't set up atexit() handlers when called with opts equal to
OPENSSL_INIT_BASE_ONLY (this flag should only be used alone).
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7969)
Some Travis builds appear to fail because generated objects get
2019 copyrights now, and the diff complains.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7969)
This enables cleanup to happen on DLL unload instead of at process exit.
[extended tests]
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7983)
We have a number of instances where there are multiple "init" functions for
a single CRYPTO_ONCE variable, e.g. to load config automatically or to not
load config automatically. Unfortunately the RUN_ONCE mechanism was not
correctly giving the right return value where an alternative init function
was being used.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7983)
FreeBSD does not enable cryptodev(4) by default. OpenBSD disabled support
for /dev/crypto by default from 4.9 and removed it from 5.7. Now the engine
is properly enabled by default on BSD platforms (see #7885), it continuously
complains:
Could not open /dev/crypto: No such file or directory
Hide the nagging error message behind ENGINE_DEVCRYPTO_DEBUG.
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7896)
(cherry picked from commit c79a022da9)
CLA: trivial
Function EVP_PKEY_size has been modified to take a const parameter
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7892)
(cherry picked from commit 47ec2367eb)
Call to i2d method returns an int value.
Fix:
CID 1338183 (#1 of 1): Improper use of negative value (NEGATIVE_RETURNS)
CID 1371691 (#1 of 1): Improper use of negative value (NEGATIVE_RETURNS)
CID 1371692 (#1 of 1): Improper use of negative value (NEGATIVE_RETURNS)
[extended tests]
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7359)
(cherry picked from commit da84249be6)
The check_key_level() function currently fails when the public key
cannot be extracted from the certificate because its algorithm is not
supported. However, the public key is not needed for the last
certificate in the chain.
This change moves the check for level 0 before the check for a
non-NULL public key.
For background, this is the TPM 1.2 endorsement key certificate.
I.e., this is a real application with millions of certificates issued.
The key is an RSA-2048 key.
The TCG (for a while) specified
Public Key Algorithm: rsaesOaep
rather than the commonly used
Public Key Algorithm: rsaEncryption
because the key is an encryption key rather than a signing key.
The X509 certificate parser fails to get the public key.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7906)
It turns out that intialization may change the error number, so we
need to preserve the system error number in functions where
initialization is called for.
These are ERR_get_state() and err_shelve_state()
Fixes#7897
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7902)
(cherry picked from commit 91c5473035)
Check that s is less than the order before attempting to verify the
signature as per RFC8032 5.2.7
Fixes#7706
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/7748)
(cherry picked from commit 08afd2f37a)
Digest must be able to do partial-state copy to be used.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)
(cherry picked from commit 16e252a01b)
Make CTR mode behave like a stream cipher.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)
(cherry picked from commit b5015e834a)
The engine needs a custom cipher context copy function to open a new
/dev/crypto session.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)
(cherry picked from commit 6d99e23839)
Close the session in digest_cleanup instead of digest_final. A failure
in closing the session does not mean a previous successful digest final
has failed as well.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)
(cherry picked from commit a67203a19d)
If the source ctx has not been initialized, don't initialize the copy
either.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)
(cherry picked from commit ae8183690f)
Return failure when the digest_ctx is null in digest_update and
digest_final, and when md is null in digest_final.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)
(cherry picked from commit 4d9f996544)
Call functions to prepare methods after confirming that /dev/crytpo was
sucessfully open and that the destroy function has been set.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)
(cherry picked from commit d9d4dff5c6)
For the same reasons as in the previous commit we must preserve errno
across dlopen calls. Some implementations (e.g. solaris) do not preserve
errno even on a successful dlopen call.
Fixes#6953
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7680)
(cherry picked from commit 3cb4e7dc1c)
This function can end up being called during ERR_get_error() if we are
initialising. ERR_get_error() must preserve errno since it gets called via
SSL_get_error(). If that function returns SSL_ERROR_SYSCALL then you are
supposed to inspect errno.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7680)
(cherry picked from commit 71b1ceffc4)
It turns out that the strictness that was implemented in
EVP_PKEY_asn1_new() (see Github openssl/openssl#6880) was badly placed
for some usages, and that it's better to do this check only when the
method is getting registered.
Fixes#7758
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7847)
(cherry picked from commit a860031621)
Fixed-top interfaces tolerate zero-padded inputs and facilitate
constant-time-ness. bn_div_fixed_top tolerates zero-padded dividend,
but not divisor. It's argued that divisor's length is public even
when value is secret.
[extended tests]
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7589)
(cherry picked from commit 3a4a88f436)
and add template for constant-time bn_div_3_words.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7589)
(cherry picked from commit 3da2e9c4ee)
It's being replaced with constant-time alternative.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7589)
(cherry picked from commit b34446cca2)
Check that s is less than the order before attempting to verify the
signature as per RFC8032 5.1.7
Fixes#7693
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7697)
(cherry picked from commit 0ac8f35c04)
Copy of RSA_padding_check_PKCS1_type_2 with a twist that rejects padding
if nul delimiter is preceded by 8 consecutive 0x03 bytes.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 603221407d)
And make RSAErr call unconditional.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 75f5e944be)
And make RSAErr call unconditional.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit e875b0cf2f)
Expected usage pattern is to unconditionally set error and then
wipe it if there was no actual error.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit f658a3b64d)
It turns out that on VMS, strerror() returns messages with added
spaces at the end.
We wouldn't had noticed if it wasn't for perl trimming those spaces
off for its own sake and thereby having test/recipes/02-test_errstr.t
fail on VMS.
The safe fix is to do the same trimming ourselves.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7701)
(cherry picked from commit 9f15e5b911)
ASN1_PKEY_CTRL_DEFAULT_MD_NID is documented to return 2 for a mandatory
digest algorithm, when the key can't support any others. That isn't true
here, so return 1 instead.
Partially fixes#7348
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit eb7eb1378c)
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7609)
We stored copies of the system error texts in a fixed line size array,
which is a huge waste. Instead, use a static memory pool and pack all
the string in there. The wasted space at the end, if any, gives us
some leeway for longer strings than we have measured so far.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7681)
(cherry picked from commit 2c5b6bbb67)
Blinding is performed more efficiently and securely if MONT_CTX for public
modulus is available by the time blinding parameter are instantiated. So
make sure it's the case.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7586)
(cherry picked from commit 2cc3f68cde)
dsa_builtin_paramgen2 expects the L parameter to be greater than N,
otherwise the generation will get stuck in an infinite loop.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(cherry picked from commit 3afd38b277)
(Merged from https://github.com/openssl/openssl/pull/7493)
