If this fails try out if mfspr268 works.
Use OPENSSL_ppccap=0x20 for enabling mftb,
OPENSSL_ppccap=0x40 for enabling mfspr268,
and OPENSSL_ppccap=0 for enabling neither.
Fixes#8012
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8043)
(cherry picked from commit c8f370485c)
If you use a BIO and set up your own buffer that is not freed, the
memory bio will leak the BIO_BUF_MEM object it allocates.
The trouble is that the BIO_BUF_MEM is allocated and kept around,
but it is not freed if BIO_NOCLOSE is set.
The freeing of BIO_BUF_MEM was fairly confusing, simplify things
so mem_buf_free only frees the memory buffer and free the BIO_BUF_MEM
in mem_free(), where it should be done.
Alse add a test for a leak in the memory bio
Setting a memory buffer caused a leak.
Signed-off-by: Corey Minyard <minyard@acm.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8051)
(cherry picked from commit c6048af23c)
Having a weak getauxval() and only depending on GNU C without looking
at the library we build against meant that it got picked up where not
really expected.
So we change this to check for the glibc version, and since we know it
exists from that version, there's no real need to make it weak.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/8028)
(cherry picked from commit 5f40dd158c)
It turns out that AT_SECURE may be defined through other means than
our inclusion of sys/auxv.h, so to be on the safe side, we define our
own guard and use that to determine if getauxval() should be used or
not.
Fixes#7932
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7933)
(cherry picked from commit aefb980c45)
We were setting a limit of SSL3_RT_MAX_PLAIN_LENGTH on the size of the
ClientHello. AFAIK there is nothing in the standards that requires this
limit.
The limit goes all the way back to when support for extensions was first
added for TLSv1.0. It got converted into a WPACKET max size in 1.1.1. Most
likely it was originally added to avoid the complexity of having to grow
the init_buf in the middle of adding extensions. With WPACKET this is
irrelevant since it will grow automatically.
This issue came up when an attempt was made to send a very large
certificate_authorities extension in the ClientHello.
We should just remove the limit.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7424)
(cherry picked from commit 7835e97b6f)
5. check_return: Calling EVP_EncodeUpdate without checking return value
(as is done elsewhere 4 out of 5 times).
Fix CID 1371695, 1371698: Resource leak in test/evp_test.c
- leaked_storage: Variable edata going out of scope leaks the storage it
points to.
- leaked_storage: Variable encode_ctx going out of scope leaks the
storage it points to
Fix CID 1430437, 1430426, 1430429 : Dereference before null check in test/drbg_cavs_test.c
check_after_deref: Null-checking drbg suggests that it
may be null, but it has already been dereferenced on all paths leading
to the check
Fix CID 1440765: Dereference before null check in test/ssltestlib.c
check_after_deref: Null-checking ctx suggests that it may be null, but
it has already been dereferenced on all paths leading to the check.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7993)
(cherry picked from commit 760e2d60e6)
1. In addition to overriding the default application name,
one can now also override the configuration file name
and flags passed to CONF_modules_load_file().
2. By default we still keep going when configuration file
processing fails. But, applications that want to be
strict about initialization errors can now make explicit
flag choices via non-null OPENSSL_INIT_SETTINGS that omit
the CONF_MFLAGS_IGNORE_RETURN_CODES flag (which had so far
been both undocumented and unused).
3. In OPENSSL_init_ssl() do not request OPENSSL_INIT_LOAD_CONFIG
if the options already include OPENSSL_INIT_NO_LOAD_CONFIG.
4. Don't set up atexit() handlers when called with opts equal to
OPENSSL_INIT_BASE_ONLY (this flag should only be used alone).
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7969)
Some Travis builds appear to fail because generated objects get
2019 copyrights now, and the diff complains.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7969)
This was complicated by the fact that we were using this extension for our
duplicate extension handling tests. In order to add tests for cryptopro
bug the duplicate extension handling tests needed to change first.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7984)
(cherry picked from commit 9effc496ad)
The cryptopro extension is supposed to be unsolicited and appears in the
ServerHello only. Additionally it is unofficial and unregistered - therefore
we should really treat it like any other unknown extension if we see it in
the ClientHello.
Fixes#7747
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7984)
(cherry picked from commit 23fed8ba0e)
This enables cleanup to happen on DLL unload instead of at process exit.
[extended tests]
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7983)
Test that atexit handlers get called properly at process exit, unless we
have explicitly asked for them not to be.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7983)
The whole point of shlibloadtest is to test dynamically loading and
unloading the library. If we link shlibloadtest against libcrypto then that
might mask potential issues.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7983)
We have a number of instances where there are multiple "init" functions for
a single CRYPTO_ONCE variable, e.g. to load config automatically or to not
load config automatically. Unfortunately the RUN_ONCE mechanism was not
correctly giving the right return value where an alternative init function
was being used.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7983)
FreeBSD does not enable cryptodev(4) by default. OpenBSD disabled support
for /dev/crypto by default from 4.9 and removed it from 5.7. Now the engine
is properly enabled by default on BSD platforms (see #7885), it continuously
complains:
Could not open /dev/crypto: No such file or directory
Hide the nagging error message behind ENGINE_DEVCRYPTO_DEBUG.
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7896)
(cherry picked from commit c79a022da9)
CLA: trivial
Function EVP_PKEY_size has been modified to take a const parameter
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7892)
(cherry picked from commit 47ec2367eb)
Call to i2d method returns an int value.
Fix:
CID 1338183 (#1 of 1): Improper use of negative value (NEGATIVE_RETURNS)
CID 1371691 (#1 of 1): Improper use of negative value (NEGATIVE_RETURNS)
CID 1371692 (#1 of 1): Improper use of negative value (NEGATIVE_RETURNS)
[extended tests]
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7359)
(cherry picked from commit da84249be6)
CID 1440002 (#1 of 1): Use after free (USE_AFTER_FREE)
Not a deadly error, because error was just before app exit.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7359)
(cherry picked from commit 39fc4c17c4)
The check_key_level() function currently fails when the public key
cannot be extracted from the certificate because its algorithm is not
supported. However, the public key is not needed for the last
certificate in the chain.
This change moves the check for level 0 before the check for a
non-NULL public key.
For background, this is the TPM 1.2 endorsement key certificate.
I.e., this is a real application with millions of certificates issued.
The key is an RSA-2048 key.
The TCG (for a while) specified
Public Key Algorithm: rsaesOaep
rather than the commonly used
Public Key Algorithm: rsaEncryption
because the key is an encryption key rather than a signing key.
The X509 certificate parser fails to get the public key.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7906)
The correct function name is SSL_CTX_enable_ct, not SSL_CTX_ct_enable.
Signed-off-by: Christian Heimes <christian@python.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7916)
(cherry picked from commit 6f8b858d05)
While stereotyped repetitions are frowned upon in literature, they
serve a useful purpose in manual pages, because it is easier for
the user to find certain information if it is always presented in
the same way. For that reason, this commit harmonizes the varying
formulations in the HISTORY section about which functions, flags,
etc. were added in which OpenSSL version.
It also attempts to make the pod files more grep friendly by
avoiding to insert line breaks between the symbol names and the
corresponding version number in which they were introduced
(wherever possible). Some punctuation and typographical errors
were fixed on the way.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7854)
It turns out that intialization may change the error number, so we
need to preserve the system error number in functions where
initialization is called for.
These are ERR_get_state() and err_shelve_state()
Fixes#7897
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7902)
(cherry picked from commit 91c5473035)
It turned out that .S files aren't to be treated as lightly as I
thought. They need to go through a preprocessing step, which .s files
don't need to.
Corrects #7703
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7889)
(cherry picked from commit e436664828)
CLA: trivial
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7887)
(cherry picked from commit 829800b073)
There was a trailing :w at a line, which didn't make sense in context
of the sentence/styling. Removed it, because I think it's a leftover
vi command.
CLA: trivial
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7875)
(cherry picked from commit 143b631639)
