We need to use the hashsize in generating the exportsecret not 0! Otherwise
we end up with random garbage for the secret.
It was pure chance that this passed the tests previously. It so happens
that, because we call SSL_export_keying_material() repeatedly for different
scenarios in the test, we end up in the tls13_export_keying_material() at
exactly the same position in the stack each time and therefore end up using
the same random garbage secret each time!
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3810)
There are no public TLSv1_3_*method() functions so
OPENSSL_NO_TLS1_3_METHOD doesn't make any sense and should be removed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3800)
Properly copy ext.alpn_session in ssl_session_dup()
Use OPENSSL_strndup() as that's used in ssl_asn1.c
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3770)
In draft-ietf-tls-tls13-20 Appendix B we find that:
This section describes protocol types and constants. Values listed
as _RESERVED were used in previous versions of TLS and are listed
here for completeness. TLS 1.3 implementations MUST NOT send them
but might receive them from older TLS implementations.
Similarly, in section 4.2.3 we see:
Legacy algorithms Indicates algorithms which are being deprecated
because they use algorithms with known weaknesses, specifically
SHA-1 which is used in this context with either with RSA using
RSASSA-PKCS1-v1_5 or ECDSA. These values refer solely to
signatures which appear in certificates (see Section 4.4.2.2) and
are not defined for use in signed TLS handshake messages.
Endpoints SHOULD NOT negotiate these algorithms but are permitted
to do so solely for backward compatibility. Clients offering
these values MUST list them as the lowest priority (listed after
all other algorithms in SignatureSchemeList). TLS 1.3 servers
MUST NOT offer a SHA-1 signed certificate unless no valid
certificate chain can be produced without it (see
Section 4.4.2.2).
However, we are currently sending the SHA2-based DSA signature schemes
and many SHA1-based schemes, which is in contradiction with the specification.
Because TLS 1.3 support will appear in OpenSSL 1.1, we are bound by
stability requirements to continue to offer the DSA signature schemes
and the deprecated hash algorithms. at least until OpenSSL 1.2.
However, for pure TLS 1.3 clients that do not offer lower TLS versions,
we can be compliant. Do so, and leave a note to revisit the issue when
we are permitted to break with sacred historical tradition.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3326)
Following on from the previous commit this fixes another instance where
we need to treat a -ve return from EVP_DigestVerify() as a bad signature.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3756)
Prior to 72ceb6a we treated all failures from the call to
EVP_DigestVerifyFinal() as if it were a bad signature, and failures in
EVP_DigestUpdate() as an internal error. After that commit we replaced
this with the one-shot function EVP_DigestVerify() and treated a 0 return
as a bad signature and a negative return as an internal error. However,
some signature errors can be negative (e.g. according to the docs if the
form of the signature is wrong). Therefore we should treat all <=0
returns as a bad signature.
This fixes a boringssl test failure.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3756)
Per RFC 7905, the cipher suite names end in "_SHA256". The original
implementation targeted the -03 draft, but there was a -04 draft right
before the RFC was published to make the names consistent.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3748)
initialize some local variables
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3741)
The value of BIO_CTRL_DGRAM_SET_PEEK_MODE was clashing with the value for
BIO_CTRL_DGRAM_SCTP_SET_IN_HANDSHAKE. In an SCTP enabled build
BIO_CTRL_DGRAM_SCTP_SET_IN_HANDSHAKE was used unconditionally with
the reasoning that it would be ignored if SCTP wasn't in use. Unfortunately
due to this clash, this wasn't the case. The BIO ended up going into peek
mode and was continually reading the same data over and over - throwing it
away as a replay.
Fixes#3723
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3724)
This does things as per the recommendation in the TLSv1.3 spec. It also
means that the server will always choose its preferred ciphersuite.
Previously the server would only select ciphersuites compatible with the
session.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3623)
Also remove nested OPENSSL_NO_EC conditional; it was properly indented,
but a no-op.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3693)
Add "*" as indicator meaning the function/reason is removed, so put an
empty string in the function/reason string table; this preserves backward
compatibility by keeping the #define's.
In state files, trailing backslash means text is on the next line.
Add copyright to state files
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3640)
It is an API to be used from the early callback that indicates what
extensions were present in the ClientHello, and in what order.
This can be used to eliminate unneeded calls to SSL_early_get0_ext()
(which itself scales linearly in the number of extensions supported
by the library).
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2976)
We prevent compression both when the server is parsing the ClientHello
and when the client is constructing the ClientHello. A 1.3 ServerHello
has no way to hand us back a compression method, and we already check
that the server does not try to give us back a compression method that
we did not request, so these checks seem sufficient.
Weaken the INSTALL note slightly, as we do now expect to interoperate
with other implementations.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3131)
Signed-off-by: Paul Yang <paulyang.inf@gmail.com>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3622)
This uses memset() to clear all of the SRP_CTX when free'ing or
initializing it as well as in error paths instead of having a series
of NULL and zero assignments as it is safer.
It also changes SSL_SRP_CTX_init() to reset all the SRP_CTX to zero
in case or error, previously it could retain pointers to freed
memory, potentially leading to a double free.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3467)
Ownership and lifetime rules of SRP_CTX.info are confusing and different
from those of SRP_CTX.login, making it difficult to use correctly.
This makes the ownership and lifetime be the same as those of SRP_CTX.login,
thet is a copy is made when setting it and is freed when SRP_CTX is freed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3467)
This used to work but was inadvertently removed as part of the TLSv1.3
work. This adds it back.
Fixes#3633
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3639)
Run perltidy on util/mkerr
Change some mkerr flags, write some doc comments
Make generated tables "const" when genearting lib-internal ones.
Add "state" file for mkerr
Renerate error tables and headers
Rationalize declaration of ERR_load_XXX_strings
Fix out-of-tree build
Add -static; sort flags/vars for options.
Also tweak code output
Moved engines/afalg to engines (from master)
Use -static flag
Standard engine #include's of errors
Don't linewrap err string tables unless necessary
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3392)
At the moment we flush the write BIO if we send a fatal alert, but not a
warning one. This can mean the warning is never sent if we never do another
write and subsequently flush the BIO. Instead we should just always flush
after writing an alert.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3432)
Code was added in commit b3c31a65 that overwrote the last ex_data value
using CRYPTO_dup_ex_data() causing a memory leak, and potentially
confusing the ex_data dup() callback.
In ssl_session_dup(), fix error handling (properly reference and up-ref
shared data) and new-up the ex_data before calling CRYPTO_dup_ex_data();
all other structures that dup ex_data have the destination ex_data new'd
before the dup.
Fix up some of the ex_data documentation.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3323)
The check for SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION is
inconsistent. Most places check SSL->options, one place is checking
SSL_CTX->options; fix that.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
GH: #3523
SSLv3 (specifically with client auth) cannot use one shot APIs: the digested
data and the master secret are handled in separate update operations. So
in the special case of SSLv3 use the streaming API.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3527)
The return code from tls1_mac is supposed to be a boolean 0 for fail, 1 for
success. In one place we returned -1 on error. This would cause code calling
the mac function to erroneously see this as a success (because a non-zero
value is being treated as success in all call sites).
Fortunately, AFAICT, the place that returns -1 can only happen on an
internal error so is not under attacker control. Additionally this code only
appears in master. In 1.1.0 the return codes are treated differently.
Therefore there are no security implications.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3495)
We are quite inconsistent about which alerts get sent. Specifically, these
alerts should be used (normally) in the following circumstances:
SSL_AD_DECODE_ERROR = The peer sent a syntactically incorrect message
SSL_AD_ILLEGAL_PARAMETER = The peer sent a message which was syntactically
correct, but a parameter given is invalid for the context
SSL_AD_HANDSHAKE_FAILURE = The peer's messages were syntactically and
semantically correct, but the parameters provided were unacceptable to us
(e.g. because we do not support the requested parameters)
SSL_AD_INTERNAL_ERROR = We messed up (e.g. malloc failure)
The standards themselves aren't always consistent but I think the above
represents the best interpretation.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3480)
add_key_share() is a helper function used during key_share extension
construction. It is expected to be a simple boolean success/fail return.
It shouldn't be using the new EXT_RETURN type but it was partially converted
anyway. This changes it back.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3488)
The current TLSv1.3 spec says:
'If a server is authenticating via a certificate and the client has not
sent a "signature_algorithms" extension, then the server MUST abort the
handshake with a "missing_extension" alert (see Section 8.2).'
If we are resuming then we are not "authenticating via a certificate" but
we were still aborting with the missing_extension alert if sig algs was
missing.
This commit ensures that we only send the alert if we are not resuming.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3478)
We already did this on an ad-hoc per extension basis (for some extensions).
This centralises it and makes sure we do it for all extensions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3418)
An alert message is 2 bytes long. In theory it is permissible in SSLv3 -
TLSv1.2 to fragment such alerts across multiple records (some of which
could be empty). In practice it make no sense to send an empty alert
record, or to fragment one. TLSv1.3 prohibts this altogether and other
libraries (BoringSSL, NSS) do not support this at all. Supporting it adds
significant complexity to the record layer, and its removal is unlikely
to cause inter-operability issues.
The DTLS code for this never worked anyway and it is not supported at a
protocol level for DTLS. Similarly fragmented DTLS handshake records only
work at a protocol level where at least the handshake message header
exists within the record. DTLS code existed for trying to handle fragmented
handshake records smaller than this size. This code didn't work either so
has also been removed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3476)
- Mostly missing fall thru comments
- And uninitialized value used in sslapitest.c
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3440)
Add "single part" digest sign and verify functions. These sign and verify
a message in one function. This simplifies some operations and it will later
be used as the API for algorithms which do not support the update/final
mechanism (e.g. PureEdDSA).
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3409)
The function SSL_set_SSL_CTX() can be used to swap the SSL_CTX used for
a connection as part of an SNI callback. One result of this is that the
s->cert structure is replaced. However this structure contains information
about any custom extensions that have been loaded. In particular flags are
set indicating whether a particular extension has been received in the
ClientHello. By replacing the s->cert structure we lose the custom
extension flag values, and it appears as if a client has not sent those
extensions.
SSL_set_SSL_CTX() should copy any flags for custom extensions that appear
in both the old and the new cert structure.
Fixes#2180
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3425)
It is invalid if we receive an HRR but no change will result in
ClientHello2.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3414)
If an HRR gets sent without a key_share (e.g. cookie only) then the code
fails when it should not.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3414)
It is illegal in a TLSv1.3 ClientHello to send anything other than the
NULL compression method. We should send an alert if we find anything else
there. Previously we were ignoring this error.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3410)
When using the -trace option with TLSv1.3 all records appear as "application
data". This adds the ability to see the inner content type too.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3408)
This trace option does not appear in Configure as a separate option and is
undocumented. It can be switched on using "-DOPENSSL_SSL_TRACE_CRYPTO",
however this does not compile in master or in any 1.1.0 released version.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3408)
The TLSv1.3 spec says that a server SHOULD send supported_groups in the
EE message if there is a group that it prefers to the one used in the
key_share. Clients MAY act on that. At the moment we don't do anything
with it on the client side, but that may change in the future.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3395)
SSL_CTX_use_serverinfo_ex() et al were always processing data as if it was
V2 format, even if it was V1. This bug was masked because, although we had
a test which loaded V1 serverinfo data from a file, the function
SSL_CTX_use_serverinfo_file() transparently converts V1 data to V2 before
calling SSL_CTX_use_serverinfo_ex().
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3382)
|version| "could" be used uninitialized here, not really, but the
compiler doesn't understand the flow
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3373)
Ensure that serverinfo only gets added for the first Certificate in a list.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3298)
We already did this for ServerHello and EncryptedExtensions. We should be
doing it for Certificate and HelloRetryRequest as well.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3298)
This enables us to know what messages the extensions are relevant for in
TLSv1.3. The new file format is not compatible with the previous one so
we call it SERVERINFOV2.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3298)
Add padding callback for application control
Standard block_size callback
Documentation and tests included
Configuration file/s_client/s_srver option
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3130)
This fixes a segfault if a NULL parse_cb is passed to
SSL_CTX_add_{client,server}_custom_ext, which was supported in the
pre-1.1.1 implementation.
This behaviour is consistent with the other custom_ext_*_old_cb_wrap
functions, and with the new SSL_CTX_add_custom_ext function.
CLA: trivial
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3310)
Previously, init and finalization function for extensions are called
per extension block, rather than per message. This commit changes
that behaviour, and now they are called per message. The parse
function is still called per extension block.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3244)
Because NST messages arrive post-handshake, the session may have already
gone into the cache. Once in the cache a session must be immutable -
otherwise you could get multi-thread issues.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3008)
Provide a way to test whether the SSL_SESSION object can be used to resume a
sesion or not.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3008)
TLSv1.3 will do the same thing as TLSv1.2 with tickets with regards to session
ids, i.e. it will create a synthetic session id when the session is established,
so it is reasonable to check the session id length, even in TLSv1.3.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3008)
Ensure that there are ciphersuites enabled for the maximum supported
version we will accept in a ClientHello.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3316)
Ensure that there are ciphersuites enabled for the maximum supported
version we are claiming in the ClientHello.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3316)
The function tls_early_post_process_client_hello() was overwriting the
passed "al" parameter even if it was successful. The caller of that
function, tls_post_process_client_hello(), sets "al" to a sensible default
(HANDSHAKE_FAILURE), but this was being overwritten to be INTERNAL_ERROR.
The result is a "no shared cipher" error (and probably other similar errors)
were being reported back to the client with an incorrect INTERNAL_ERROR
alert.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3314)
We were allocating the write buffer based on the size of max_send_fragment,
but ignoring it when writing data. We should fragment handshake messages
if they exceed max_send_fragment and reject application data writes that
are too large.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3286)
There was code existing which attempted to handle the case where application
data is received after a reneg handshake has started in SCTP. In normal DTLS
we just fail the connection if this occurs, so there doesn't seem any reason
to try and work around it for SCTP. In practice it didn't work properly
anyway and is probably a bad idea to start with.
Fixes#3251
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3286)
ECDHE is not properly defined for SSLv3. Commit fe55c4a2 prevented ECDHE
from being selected in that protocol. However, historically, servers do
still select ECDHE anyway so that commit causes interoperability problems.
Clients that previously worked when talking to an SSLv3 server could now
fail.
This commit introduces an exception which enables a client to continue in
SSLv3 if the server selected ECDHE.
[extended tests]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3204)
doing the pms assignment after log is successful
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3278)
X509_STORE_add_cert and X509_STORE_add_crl are changed to return
success if the object to be added was already found in the store, rather
than returning an error.
Raise errors if empty or malformed files are read when loading certificates
and CRLs.
Remove NULL checks and allow a segv to occur.
Add error handing for all calls to X509_STORE_add_c{ert|tl}
Refactor these two routines into one.
Bring the unit test for duplicate certificates up to date using the test
framework.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2830)
This resulted in the SCT timestamp check always failing, because the
timestamp appeared to be in the future.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3138)
SSLv3 does not support TLS extensions, and thus, cannot provide any
curves for ECDH(E). With the removal of the default (all) list of curves
being used for connections that didn't provide any curves, ECDHE is no
longer possible.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3181)
RFC 7301 mandates that the server SHALL respond with a fatal
"no_application_protocol" alert when there is no overlap between
the client's supplied list and the server's list of supported protocols.
In commit 062178678f we changed from
ignoring non-success returns from the supplied alpn_select_cb() to
treating such non-success returns as indicative of non-overlap and
sending the fatal alert.
In effect, this is using the presence of an alpn_select_cb() as a proxy
to attempt to determine whether the application has configured a list
of supported protocols. However, there may be cases in which an
application's architecture leads it to supply an alpn_select_cb() but
have that callback be configured to take no action on connections that
do not have ALPN configured; returning SSL_TLSEXT_ERR_NOACK from
the callback would be the natural way to do so. Unfortunately, the
aforementioned behavior change also treated SSL_TLSEXT_ERR_NOACK as
indicative of no overlap and terminated the connection; this change
supplies special handling for SSL_TLSEXT_ERR_NOACK returns from the
callback. In effect, it provides a way for a callback to obtain the
behavior that would have occurred if no callback was registered at
all, which was not possible prior to this change.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2570)
The old custom extensions API was not TLSv1.3 aware. Extensions are used
extensively in TLSv1.3 and they can appear in many different types of
messages. Therefore we need a new API to be able to cope with that.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3139)
This move prepares for the later addition of the new custom extensions
API. The context codes have an additional "SSL_" added to their name to
ensure we don't have name clashes with other applications.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3139)
This increases portability of SSL_SESSION files between architectures
where the size of |long| may vary. Before this, SSL_SESSION files
produced on a 64-bit long architecture may break on a 32-bit long
architecture.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3088)
Add functions to add/retrieve the certificate_authorities. The older
client_CA functions mainly just call the new versions now.
Rename fields sice new extension can be generated by client and server.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3015)
The macro SSL_get_server_tmp_key() returns information about the temp key
used by the server during a handshake. This was returning NULL for TLSv1.3
and causing s_client to omit this information in its connection summary.
Fixes#3081
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3114)
If we have received the EoED message but not yet had the CF then we are
"in init". Despite that we still want to write application data, so suppress
the "in init" check in ssl3_write_bytes() in that scenario.
Fixes#3041
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3091)
SSL_get_max_early_data() recently added by 3fc8d85610 ("Construct the
ticket_early_data_info extension", 2017-02-17) is supposed to take an
SSL, but it doesn't.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3113)
Numerous changes have been made to the supported built-in extensions and
SSL_extension_supported() has not kept up.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3097)
If the server received EoED then SSL_read_early_data() will return
SSL_READ_EARLY_DATA_FINISH. However if the CF has not yet been processed
then SSL_is_init_finished() will still return 0. Therefore we should still
be able to write early data.
Fixes#3041
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3089)
If read_ahead is set, or SSL_MODE_AUTO_RETRY is used then if
SSL_read_early_data() hits an EndOfEarlyData message then it will
immediately retry automatically, but this time read normal data instead
of early data!
Fixes#3041
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3077)
Variable 'pktype' was set but not used under OPENSSL_NO_GOST. This change
will fix the build warning under [-Werror=unused-but-set-variable].
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2961)
A similar change that probably should have been wrapped into
commit e0926ef49d.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3010)
Fix some comments too
[skip ci]
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3069)
Commit 6b1bb98fa moved the processing of ClientHello extensions into the
state machine post-processing stage. After processing s->init_num is reset
to 0, so by post-processing we cannot rely on its value. Unfortunately we
were using it to handle the PSK extension. This causes the handshake to
fail.
We were using init_num to figure out the length of ClientHello2 so we can
remove it from the handshake_buffer. The handshake_buffer holds the
transcript of all the messages sent so far. For PSK processing though we
only want to add in a partial ClientHello2. This commit changes things so
we just work out where ClientHello2 starts, working forward from the
beginning of handshake_buffer.
Fixes#2983
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2996)
This label for this derivation was incorrectly "derived" or "der" depending
on the pointer size of the build(!). The correct string is "derived secret".
(cherry picked from commit 936dcf272033c1bf59a5e859ec63e2557194f191)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2989)
In OpenSSL 1.1.0 the padding extension MUST be last because it calculates
the length of everything that has been written into the ClientHello to
determine whether it needs to be padded or not. With TLSv1.3 that isn't
possible because the specification requires that the PSK extension is last.
Therefore we need to fix the padding extension to take account of any PSK
extension that will be later added.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2968)
Choose a new ciphersuite for the HRR. Don't just use the one from the
session.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)
Don't include a PSK that does not have the right hash for the selected
ciphersuite following an HRR.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)
Draft-19 changes the HRR transcript hash so that the initial ClientHello
is replaced in the transcript with a special synthetic message_hash message
that just contains a hash of ClientHello1 as its message body.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)
The end of early data is now indicated by a new handshake message rather
than an alert.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)
tls1_get_curvelist() does not read from its third parameter, so
the assignments prior to function call were dead code and can be removed.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2952)
Instead of making a positive comparison against the invalid value
that our server would send, make a negative check against the only
value that is not an error.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2953)
Zero out the length alongside the NULLing of the pointer, to
bring parity between the selected and proposed fields..
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2954)
No need to break out of the loop and repeat the loop termination
condition when we can just return.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2949)
Found using various (old-ish) versions of gcc.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2940)
... in functions dealing with the SSL object rather than the context.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2870)
that refers to space
deallocated by a call to the free function in tls_decrypt_ticket.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2897)
(cherry picked from commit 13ed1afa92)
The value of SSL3_RT_MAX_ENCRYPTED_LENGTH normally includes the compression
overhead (even if no compression is negotiated for a connection). Except in
a build where no-comp is used the value of SSL3_RT_MAX_ENCRYPTED_LENGTH does
not include the compression overhead.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2872)
In TLSv1.3 the above messages signal a key change. The spec requires that
the end of these messages must align with a record boundary. We can detect
this by checking for decrypted but as yet unread record data sitting in
OpenSSL buffers at the point where we process the messages.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2875)
Also updates SSL_has_pending() to use it. This actually fixes a bug in
SSL_has_pending() which is supposed to return 1 if we have any processed
or unprocessed data sitting in OpenSSL buffers. However it failed to return
1 if we had processed non-application data pending.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2875)
Also, restore 1.0.2 behavior of looping over all BIO's in the chain.
Thanks to Joseph Bester for finding this and suggesting a fix to the
crash.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2651)
If early data is sent to a server, but ALPN is not used then memcmp is
called with a NULL pointer which is undefined behaviour.
Fixes#2841
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2845)
We do not allow the generation of TLSv1.3 cookies. But if we receive one
in an HRR we will echo it back in the ClientHello.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2839)
A leak of an SSL_SESSION object can occur when decoding a psk extension on
an error path when using TLSv1.3
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2843)
Change tls12_sigalg_allowed() so it is passed a SIGALG_LOOKUP parameter,
this avoids multiple lookups.
When we copy signature algorithms return an error if no valid TLS message
signing algorithm is present. For TLS 1.3 this means we need at least one
signature algorithm other than RSA PKCS#1 or SHA1 both of which can only be
used to sign certificates and not TLS messages.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2840)
Change the early data API so that the server must use
SSL_write_early_data() to write to an unauthenticated client.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)
This is for consistency with the rest of the API where all the functions
are called *early_data*.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)
