x509 store's objects cache can get corrupted when using dir lookup
method in multithreaded application. Claim x509 store's lock when
accessing objects cache.
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9326)
(cherry picked from commit a161738a70)
Modified rev to rev64, because rev only takes integer registers.
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90827
Otherwise, the following error will occur.
Error: operand 1 must be an integer register -- `rev v31.16b,v31.16b'
CLA: trivial
Signed-off-by: Lei Maohui <leimaohui@cn.fujitsu.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9151)
(cherry picked from commit 7b0fceed21)
Happens when trying to generate 4 or 5 bit safe primes.
[extended tests]
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9311)
(cherry picked from commit 291f616ced)
If SRCTOP != BLDTOP, and SRCTOP is given in relative form, e.g.
"./config ../openssl", then a bug in Perl's abs2rel may trigger that directory-
rewriting in __cwd results in wrong entries in %directories under certain
circumstances, e.g. when a test executes run(app(["openssl"]) after indir.
There should not be any need to go to a higher directory from BLDDIR or SRCDIR,
so it should be OK to use them in their absolute form, also resolving all
possible symlinks, right from the start.
Following the File::Spec::Functions bug description (reported to perl.org):
When abs2rel gets a path argument with ..s that are crossing over the ..s
trailing the base argument, the result is wrong.
Example
PATH: /home/goal/test/..
BASE: /home/goal/test/../../base
Good result: ../goal
Bad result: ../..
Bug verified with File::Spec versions
- 3.6301
- 3.74 (latest)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7031)
(cherry picked from commit 7a2027240e)
BOOLEAN does not have valid data in the value.ptr member,
thus don't use it here.
Fixes#9276
[extended tests]
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9278)
(cherry picked from commit 6335f837cf)
This does no harm, and ensures that the inclusion isn't mistakenly
removed in the generated *err.h where it's actually needed.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit b53c4fe3f9)
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9281)
The maximum key length for rc5 is 2040 bits so we should not attempt to
use keys longer than this.
Issue found by OSS-Fuzz and Guido Vranken.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8834)
(cherry picked from commit 792cb4ee8d)
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9275)
The manual pages require for some API functions that the 'random number
generator must be seeded' before calling the function. Initially, this
was meant literally, i.e. the OpenSSL CSPRNG had to be seeded manually
before calling these functions.
Since version 1.1.1, the CSPRNG is seeded automatically on first use,
so it's not the responsibility of the programmer anymore. Still, he
needs to be aware that the seeding might fail.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9257)
(cherry picked from commit 262c00882a)
It was only ever in cert_st because ssl_st was a public structure
and could not be modified without breaking the API. However, both
structures are now opaque, and thus we can freely change their layout
without breaking applications. In this case, keeping the shared
sigalgs in the SSL object prevents complications wherein they would
inadvertently get cleared during SSL_set_SSL_CTX() (e.g., as run
during a cert_cb).
Fixes#9099
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9157)
(cherry picked from commit 29948ac80c)
This reverts commit 524006dd1b.
While this change did prevent the sigalgs from getting inadvertently
clobbered by SSL_set_SSL_CTX(), it also caused the sigalgs to not be
set when the cert_cb runs. This, in turn, caused significant breakage,
such as SSL_check_chain() failing to find any valid chain. An alternate
approach to fixing the issue from #7244 will follow.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9157)
(cherry picked from commit 6f34d7bc7d)
Augment the cert_cb sslapitest to include a run that uses
SSL_check_chain() to inspect the certificate prior to installing
it on the SSL object. If the check shows the certificate as not
valid in that context, we do not install a certificate at all, so
the handshake will fail later on in processing (tls_choose_sigalg()),
exposing the indicated regression.
Currently it fails, since we have not yet set the shared sigalgs
by the time the cert_cb runs.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9157)
(cherry picked from commit 7cb8fb07e8)
This feature is enabled by default outside of FIPS builds
which ban such actions completely.
Encryption is always disallowed and will generate an error.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9112)
(cherry picked from commit 2c840201e5)
This is a bit annoying, if for instance "openssl genrsa -aes128"
tries to read a 4+ character size password, but CTRL-C does no longer
work after a RETURN key, since the flag UI_FLAG_REDOABLE is set by
UI_set_result_ex, together with the error "You must type in 4 to 1023 characters".
Thus remove the REDOABLE flag to allow CTRL-C to work.
[extended tests]
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9170)
(cherry picked from commit f8922b5107)
SSL_shutdown can fail if called during initialization, and in such case, it'll
add an error to the error queue. This adds SSL_shutdown to the list of functions
that should preceed the call to SSL_get_error.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/7465)
(cherry picked from commit df9fd168ce)
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9149)
The BIO_FLAGS_NONCLEAR_RST flag behavior was not properly documented
and it also caused the length to be incorrectly set after the reset
operation.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9179)
(cherry picked from commit 8b7b32921e)
The previous 2 commits moved supported groups and ciphers out of the
session object to avoid race conditions. We now also move ecpointformats
for consistency. There does not seem to be a race condition with access
to this data since it is only ever set in a non-resumption handshake.
However, there is no reason for it to be in the session.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9176)
Similarly to the previous commit we were storing the peer offered list
of ciphers in the session. In practice there is no need for this
information to be avilable from one resumption to the next since this
list is specific to a particular handshake. Since the session object is
supposed to be immutable we should not be updating it once we have decided
to resume. The solution is to remove the session list out of the session
object.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9176)
In TLSv1.3 the supported groups can be negotiated each time a handshake
occurs, regardless of whether we are resuming or not. We should not store
the supported groups information in the session because session objects
can be shared between multiple threads and we can end up with race
conditions. For most users this won't be seen because, by default, we
use stateless tickets in TLSv1.3 which don't get shared. However if you
use SSL_OP_NO_TICKET (to get stateful tickets in TLSv1.3) then this can
happen.
The answer is to move the supported the supported group information into
the SSL object instead.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9176)
When bufsize == 0, openssl_strerror_r should return 0 (if _GNU_SOURCE is defined),
to be consistent with non-_GNU_SOURCE variants, which exhibit the same behavior.
Fix a few cases, where the return value of openssl_strerror_r was ignored.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9163)
(cherry picked from commit e7a4682d0b)
This avoids the case where a UEFI build on FreeBSD tries to call the system
issetugid function instead of returning 0 as it should do.
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9158)
The d2i docs state that if an error occurs then |*a| is not freed. This
is not correct. On error it is freed and set to NULL. We update the docs
to say this, and also discuss the fact that this behaviour was inconsistent
prior to OpenSSL 1.1.0.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9146)
(cherry picked from commit b1d14c412a)
When compiling with --strict-warnings using gcc 7.4.0 the compiler
complains that a case falls through, even though there is an explicit
comment stating this. Moving the comment outside of the conditional
compilation section resolves this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9131)
(cherry picked from commit a2e520447e)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9123)
(cherry picked from commit e98e586b31)
ae3947de09 changed the callback arg not to have a const parameter.
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9104)
(cherry picked from commit 7588660a53)
The lookup for ::1 with getaddrinfo() might return error even if
the ::1 would work if AI_ADDRCONFIG flag is used.
Fixes: #9053
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9108)
(cherry picked from commit 3f91ede9ae)
The DEVRANDOM_WAIT feature added a select() call to wait for the
`/dev/random` device to become readable before reading from the
`/dev/urandom` device. It was introduced in commit 38023b87f0
in order to mitigate the fact that the `/dev/urandom` device
does not block until the initial seeding of the kernel CSPRNG
has completed, contrary to the behaviour of the `getrandom()`
system call.
It turned out that this change had negative side effects on
performance which were not acceptable. After some discussion it
was decided to revert this feature and leave it up to the OS
resp. the platform maintainer to ensure a proper initialization
during early boot time.
Fixes#9078
This partially reverts commit 38023b87f0.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(cherry picked from commit a08714e181)
(Merged from https://github.com/openssl/openssl/pull/9118)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9101)
(cherry picked from commit bab6046146)
[skip ci]
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9102)
(cherry picked from commit 87762939b5)
In commit 2b8fa1d56c the version-specific SSL/TLS methods were
deprecated. This patch improves the documentation of that change
by stating the deprecation more prominently in the manual page
and explaining the reason for the deprecation.
Fixes#8989
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9001)
(cherry picked from commit f308fa2573)
The 4 kB SPACE_SYS_STR_REASONS in crypto/err/err.c isn't enough for some locales.
The Russian locales consume 6856 bytes, Ukrainian even 7000.
build_SYS_str_reasons() contains an overflow check:
if (cnt > sizeof(strerror_pool))
cnt = sizeof(strerror_pool);
But since commit 9f15e5b911 it no longer
works as cnt is incremented once more after the condition.
cnt greater than sizeof(strerror_pool) results in an unbounded
OPENSSL_strlcpy() in openssl_strerror_r(), eventually causing a crash.
When the first received error string was empty or contained only
spaces, cur would move in front of the start of the strerror_pool.
Also don't call openssl_strerror_r when the pool is full.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/8966)
(cherry picked from commit fac9200a88)
