We just check that if we insert a cookie into an HRR it gets echoed back
in the subsequent ClientHello.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2839)
AGL has a history of pointing out the idiosynchronies/laxness of the
openssl PEM parser in amusing ways. If we want this functionality to
stay present, we should test that it works.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2756)
Generate a fresh certificate and DSA private key in their respective PEM
files. Modify the resulting ASCII in various ways so as to produce input
files that might be generated by non-openssl programs (openssl always
generates "standard" PEM files, with base64 data in 64-character lines
except for a possible shorter last line).
Exercise various combinations of line lengths, leading/trailing
whitespace, non-base64 characters, comments, and padding, for both
unencrypted and encrypted files. (We do not have any other test coverage
that uses encrypted files, as far as I can see, and the parser enforces
different rules for the body of encrypted files.)
Add a recipe to parse these test files and verify that they contain the
expected string or are rejected, according to the expected status.
Some of the current behavior is perhaps suboptimal and could be revisited.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2756)
TODO(robpercival): Should actually test that the output certificate
contains the poison extension.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/843)
On VMS, file names with more than one period get all but the last get
escaped with a ^, so 21-key-update.conf.in becomes 21-key-update^.conf.in
That means that %conf_dependent_tests and %skip become useless unless
we massage the file names that are used as indexes.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2678)
Since 20-cert-select.conf will vary depending in no-dh and no-dsa,
don't check it against original when those options are selected
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2680)
Make sure we get an HRR in the right circumstances based on kex mode.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2341)
test/recipes/40-test_rehash.t uses test files from certs/demo, which
doesn't exist any longer. Have it use PEM files from test/ instead.
Because rehash wants only one certificate or CRL per file, we must
also filter those PEM files to produce test files with a single object
each.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2594)
Idea is to keep it last for all eternity, so that if you find yourself
in time-pressed situation and deem that fuzz test can be temporarily
skipped, you can terminate the test suite with less hesitation about
following tests that you would have originally missed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
For TLS 1.3 we select certificates with signature algorithms extension
only. For ECDSA+SHA384 there is the additional restriction that the
curve must be P-384: since the test uses P-256 this should fail.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2339)
Now that we support internal tests properly, we can test wpacket even in
shared builds.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
It seems that the ssl test 20-cert-select.conf dislikes the lack of TLSv1.2
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2268)
The difference between the AIX MD5 password algorithm and the standard MD5
password algorithm is that in AIX there is no magic string while in the
standard MD5 password algorithm the magic string is "$1$"
Documentation of '-aixmd5' option of 'openssl passwd' command is added.
1 test is added in test/recipes/20-test-passwd.t
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2251)
Add certifcate selection tests: the certificate type is selected by cipher
string and signature algorithm.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2224)
One of the new tests uses a DH based ciphersuite. That test should be
disabled if DH is disabled.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2217)
It tests both the use of UI_METHOD (through the apps/apps.h API) and
wrapping an older style PEM password callback in a UI_METHOD.
Replace the earlier UI test with a run of this test program
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2204)
Check that signatures actually work, and that an incorrect signature
results in a handshake failure.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
Previously SKE in TLSProxy only knew about one anonymous ciphersuite so
there was never a signature. Extend that to include a ciphersuite that is
not anonymous. This also fixes a bug where the existing SKE processing was
checking against the wrong anon ciphersuite value. This has a knock on
impact on the sslskewith0p test. The bug meant the test was working...but
entirely by accident!
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
TLSv1.3 introduces PSS based sigalgs. Offering these in a TLSv1.3 client
implies that the client is prepared to accept these sigalgs even in
TLSv1.2.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
We remove the separate CertificateStatus message for TLSv1.3, and instead
send back the response in the appropriate Certificate message extension.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
Also updates TLSProxy to be able to understand the format and parse the
contained extensions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
These tests depend on there being at least one protocol version below
TLSv1.3 enabled.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2144)
The CT tests in test_sslmessages require EC to be available, therefore
we must skip these if no-ec
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2153)
The previous commit fixed a bug where the EC point formats extensions did
not appear in the ServerHello. This should have been caught by
70-test_sslmessages but that test never tries an EC ciphersuite. This
updates the test to do that.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2153)
More importantly, port CRL test from boringSSL crypto/x509/x509_test.cc
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1775)
The indentation was a bit off in some of the perl files following the
extensions refactor.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Move this module into the same place as other test helper modules. It
simplifies the code and keeps like things together.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Ensure the tests can find the checkhandshake module on all platforms
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Check that the extension framework properly handles extensions specific
to a protocol version
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make sure we did not break the unsafe legacy reneg checks with the extension
work.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The s_server option -status_file has been added so this test can be
enabled.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Repeat for various handshake types
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Extend test_tls13messages to additionally check the expected extensions
under different options given to s_client/s_server.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
In TLS1.3 some ServerHello extensions remain in the ServerHello, while
others move to the EncryptedExtensions message. This commit performs that
move.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
At this stage the message is just empty. We need to fill it in with
extension data.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
There are some minor differences in the format of a ServerHello in TLSv1.3.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The best way to test the UI interface is currently by using an openssl
command that uses password_callback. The only one that does this is
'genrsa'.
Since password_callback uses a UI method derived from UI_OpenSSL(), it
ensures that one gets tested well enough as well.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2040)
Commit b3618f44 added a test for mac-then-encrypt. However the test fails
when running with "enable-tls1_3". The problem is that the test creates a
connection, which ends up being TLSv1.3. However it also restricts the
ciphers to a single mac-then-encrypt ciphersuite that is not TLSv1.3
compatible so the connection aborts and the test fails. Mac-then-encrypt
is not relevant to TLSv1.3, so the test should disable that protocol
version.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Test suite used from boring, written by David Benjamin.
Test driver converted from C++ to C.
Added a Perl program to check the testsuite file.
Extensive review feedback incorporated (thanks folks).
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Verify that the encrypt-then-mac negotiation is handled
correctly. Additionally, when compiled with no-asm, this test ensures
coverage for the constant-time MAC copying code in
ssl3_cbc_copy_mac. The proxy-based CBC padding test covers that as
well but it's nevertheless better to have an explicit handshake test
for mac-then-encrypt.
Reviewed-by: Andy Polyakov <appro@openssl.org>
TLSv1.3 has a NewSessionTicket message, but it is *completely* different to
the TLSv1.2 one and may as well have been called something else. This commit
removes the old style NewSessionTicket from TLSv1.3. We will have to add the
new style one back in later.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The previous commits put in place the logic to exchange key_share data. We
now need to do something with that information. In <= TLSv1.2 the equivalent
of the key_share extension is the ServerKeyExchange and ClientKeyExchange
messages. With key_share those two messages are no longer necessary.
The commit removes the SKE and CKE messages from the TLSv1.3 state machine.
TLSv1.3 is completely different to TLSv1.2 in the messages that it sends
and the transitions that are allowed. Therefore, rather than extend the
existing <=TLS1.2 state transition functions, we create a whole new set for
TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time
they will be amended.
The new TLSv1.3 transitions remove SKE and CKE completely. There's also some
cleanup for some stuff which is not relevant to TLSv1.3 and is easy to
remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN.
I also disable EXTMS for TLSv1.3. Using it was causing some added
complexity, so rather than fix it I removed it, since eventually it will not
be needed anyway.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Send a TLS1.4 ClientHello with supported_versions and get TLS1.3
Send a TLS1.3 ClientHello without supported_versions and get TLS1.2
Reviewed-by: Rich Salz <rsalz@openssl.org>
Prior to TLS1.3 we check that the received record version number is correct.
In TLS1.3 we need to ignore the record version number. This adds a test to
make sure we do it correctly.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Use the newly added "executable" function rather than "system". Also filter
the output to add a prefix to every line so that the "ok" doesn't confuse
Test::More
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
This just disables all tests that fail at the moment. Over time we will
want to go over these and figure out why they are failing (and fix them if
appropriate)
Reviewed-by: Richard Levitte <levitte@openssl.org>
This adds a test to the OpenSSL test suite to invoke the BoringSSL test
suite.
It assumes you have already compiled the ossl_shim (see previous commit).
It also assumes that you have an environment variable BORING_RUNNER_DIR
set up to point to the ssl/test/runner directory of a checkout of BoringSSL.
This has only been tested with a very old version of BoringSSL (from commit
f277add6c) - since that was the last known checkout where the shim compiles
successfully. Even with that version of BoringSSL this test will fail. There
are lots of Boring tests that are failing for various reasons. Some might
be due to bugs in OpenSSL, some might be due to features that BoringSSL has
that OpenSSL doesn't, some are due to assumptions about the way BoringSSL
behaves that are not true for OpenSSL etc.
To get the verbose BoringSSL test output, run like this:
VERBOSE=1 BORING_RUNNER_DIR=/path/to/boring/ssl/test/runner make \
TESTS="test_external" test
Reviewed-by: Richard Levitte <levitte@openssl.org>
test/shlibloadtest.c assumes all Unix style platforms use .so as
shared library extension. This is not the case for Mac OS X, which
uses .dylib. Instead of this, have the test recipe find out the
extension from configuration data.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1844)
This should demonstrate that the atexit() handling is working properly (or
at least not crashing) on process exit.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Also we disable TLS1.3 by default (use enable-tls1_3 to re-enable). This is
because this is a WIP and will not be interoperable with any other TLS1.3
implementation.
Finally, we fix some tests that started failing when TLS1.3 was disabled by
default.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Includes addition of the various options to s_server/s_client. Also adds
one of the new TLS1.3 ciphersuites.
This isn't "real" TLS1.3!! It's identical to TLS1.2 apart from the protocol
and the ciphersuite...and the ciphersuite is just a renamed TLS1.2 one (not
a "real" TLS1.3 ciphersuite).
Reviewed-by: Rich Salz <rsalz@openssl.org>
The prevailing style seems to not have trailing whitespace, but a few
lines do. This is mostly in the perlasm files, but a few C files got
them after the reformat. This is the result of:
find . -name '*.pl' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
find . -name '*.c' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
find . -name '*.h' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
Then bn_prime.h was excluded since this is a generated file.
Note mkerr.pl has some changes in a heredoc for some help output, but
other lines there lack trailing whitespace too.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The TLSProxy::Record->new call hard-codes a version, like
70-test_sslrecords.t.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
This is a regression test for
https://github.com/openssl/openssl/pull/1431. It tests a
maximally-padded record with each possible invalid offset.
This required fixing a bug in Message.pm where the client sending a
fatal alert followed by close_notify was still treated as success.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The tests will only work in no-shared builds because WPACKET is an
internal only API that does not get exported by the shared library.
Reviewed-by: Rich Salz <rsalz@openssl.org>
These tests take a very long time on some platforms, and arent't
always strictly necessary. This makes it possible to turn them
off. The necessary binaries are still built, though, in case
someone still wants to do a manual run.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The previous commit revealed a long standing problem where CertStatus
processing was broken in DTLS. This would have been revealed by better
testing - so add some!
Reviewed-by: Rich Salz <rsalz@openssl.org>
User can make Windows openssl.exe to treat command-line arguments
and console input as UTF-8 By setting OPENSSL_WIN32_UTF8 environment
variable (to any value). This is likely to be required for data
interchangeability with other OSes and PKCS#12 containers generated
with Windows CryptoAPI.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Test doesn't work on Windows with non-Greek locale, because of
Win32 perl[!] limitation, not OpenSSL. For example it passes on
Cygwin and MSYS...
Reviewed-by: Matt Caswell <matt@openssl.org>
Also, re-organize RSA check to use goto err.
Add a test case.
Try all checks, not just stopping at first (via Richard Levitte)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Originally PKCS#12 subroutines treated password strings as ASCII.
It worked as long as they were pure ASCII, but if there were some
none-ASCII characters result was non-interoperable. But fixing it
poses problem accessing data protected with broken password. In
order to make asscess to old data possible add retry with old-style
password.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add a test to inject a record from the next epoch during the handshake and
make sure it doesn't get processed immediately.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make maximum fragment length configurable and add various fragmentation
tests, in addition to the existing multi-buffer tests.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In practice, CT isn't really functional without EC anyway, as most logs
use EC keys. So, skip loading the log list with no-ec, and skip CT tests
completely in that conf.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This commit only ports existing tests, and adds some coverage for
resumption. We don't appear to have any handshake tests that cover SCT
validation success, and this commit doesn't change that.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In NPN and ALPN, the protocol is renegotiated upon resumption. Test that
resumption picks up changes to the extension.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Systematically test every server-side version downgrade or upgrade.
Client version upgrade or downgrade could be tested analogously but will
be done in a later change.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
subject alternate names.
Add nameConstraints tests incluing DNS, IP and email tests both in
subject alt name extension and subject name.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Observe that the old tests were partly ill-defined:
setting sn_server1 but not sn_server2 in ssltest_old.c does not enable
the SNI callback.
Fix this, and also explicitly test both flavours of SNI mismatch (ignore
/ fatal alert). Tests still pass.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The previous commit fixed a problem where fragmented alerts would cause an
infinite loop. This commit adds a test for these fragmented alerts.
Reviewed-by: Andy Polyakov <appro@openssl.org>
On some platforms we can't startup the TLSProxy due to environmental
problems (e.g. network set up on the build machine). These aren't OpenSSL
problems so we shouldn't treat them as test failures. Just visibly
indicate that we are skipping the test.
We only skip the first time we attempt to start up the proxy. If that works
then everything else should do...if not we should probably investigate and
so report as a failure.
This also removes test_networking...there is a danger that this turns into
a test of user's environmental set up rather than OpenSSL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This commit adds some session API tests, and in particular tests the
modified behaviour of SSL_set_session() introduced in the last commit. To
do this I have factored out some common code from the asynciotest into a
new ssltestlib.c file. I've also renamed getsettest to sslapitest as this
more closely matches what it now is!
Reviewed-by: Rich Salz <rsalz@openssl.org>
When session tickets are used, it's possible that SNI might swtich the
SSL_CTX on an SSL. Normally, this is not a problem, because the
initial_ctx/session_ctx are used for all session ticket/id processes.
However, when the SNI callback occurs, it's possible that the callback
may update the options in the SSL from the SSL_CTX, and this could
cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things
can happen:
1. The session ticket TLSEXT may not be written when the ticket expected
flag is set. The state machine transistions to writing the ticket, and
the client responds with an error as its not expecting a ticket.
2. When creating the session ticket, if the ticket key cb returns 0
the crypto/hmac contexts are not initialized, and the code crashes when
trying to encrypt the session ticket.
To fix 1, if the ticket TLSEXT is not written out, clear the expected
ticket flag.
To fix 2, consider a return of 0 from the ticket key cb a recoverable
error, and write a 0 length ticket and continue. The client-side code
can explicitly handle this case.
Fix these two cases, and add unit test code to validate ticket behavior.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1098)
The previous commit changed how we handle out-of-context empty records.
This commit adds some tests for the various scenarios. There are three
tests:
1: Check that if we inject an out-of-context empty record then we fail
2: Check that if we inject an in-context empty record then we succeed
3: Check that if we inject too many in-context empty records then we fail.
Reviewed-by: Andy Polyakov <appro@openssl.org>
In rare cases, the shell we run test programs in may have complaints.
Shut those up unless testing verbosely.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Since one generates files that the other depends on, there's no
real reason to keep them separate. Since they were both different
aspects of 'openssl req', the merge ends up in 25-test_req.t.
This also makes cleanup easier.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Port client auth tests to the new framework, add coverage. The old tests
were only testing success, and only for some protocol versions; the new
tests add all protocol versions and various failure modes.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add copyright to missing assembler files.
Add copyrights to missing test/* files.
Add copyrights
Various source and misc files.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Trying to use normal perl conditions to conditionally 'use' a perl
module didn't quite work. Using the 'if' module to do so does work.
Reviewed-by: Andy Polyakov <appro@openssl.org>
As it turns out default glob's behaviour for quoted argument varies
from version to version, making it impossible to Configure or run
tests in some cases. The reason for quoting globs was to accommodate
source path with spaces in its name, which was treated by default glob
as multiple paths. File::Glob::glob on the other hand doesn't consider
spaces as delimiters and therefore works with unquoted patterns.
[Unfortunaltely File::Glob::glob, being too csh-ly, doesn't work
on VMS, hence the "pinning" is conditional.]
Reviewed-by: Richard Levitte <levitte@openssl.org>
If using the msys console then msys attempts to "fix" command line
arguments to convert them from Unix style to Windows style. One of the
things it does is to look for arguments seperated by colons. This it
assumes is a list of file paths, so it replaces the colon with a semi-colon.
This was causing one of our tests to fail when calling the "req" command
line app. We were attempting to create a new DSA key and passing the
argument "dsa:../apps/dsa1024.pem". This is exactly what we intended but
Msys mangles it to "dsa;../apps/dsa1024.pem" and the command fails.
There doesn't seem to be a way to suppress Msys name mangling. Fortunately
we can work around this issue by generating the DSA key in a separate step
by calling "gendsa".
RT#4255
Reviewed-by: Richard Levitte <levitte@openssl.org>
Previous commits fixed the implementation of the %e and %g format
specifiers as well as other issues. This commit adds a test.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This adds an async IO test. There are two test runs. The first one does
a normal handshake with lots of async IO events. The second one does the
same but this time breaks up all the written records into multiple records
of one byte in length. We do this all the way up until the CCS.
Reviewed-by: Andy Polyakov <appro@openssl.org>
In some cases, perl's glob() thinks it needs to return file names with
generation numbers, such as when a file name pattern includes two
periods. Constructing other file names by simple appending to file
names with generation numbers isn't a good idea, so for the VMS case,
just peal the generation numbers if they are there.
Fortunately, this is easy, as the returned generation number delimiter
will always be a semi-colon.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If the server does not send a session ticket extension, it should not then
send the NewSessionTicket message.
If the server sends the session ticket extension, it MUST then send the
NewSessionTicket message.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
The old proxy tests test the implementation of an application proxy
policy callback defined in the test itself, which is not particularly
useful.
It is, however, useful to test cert verify overrides in
general. Therefore, replace these tests with tests for cert verify
callback behaviour.
Also glob the ssl test inputs on the .in files to catch missing
generated files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The old cipherlist test in ssltest.c only tests the internal order of
the cipher table, which is pretty useless.
Replace this test with a test that catches inadvertent changes to the
default cipherlist.
Fix run_tests.pl to correctly filter tests that have "list" in their name.
(Also includes a small drive-by fix in .gitignore.)
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add tests for ASN.1 INTEGER: invalid tag, valid 0, 1, -1 and 0, -1 with
illegal padding.
Also add ASN1_ANY tests for 0, 1 and -1.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Using ASN1_ITEM tables in d2i_test: this then uses consistent names and
makes it easier to extend.
Add bio, reencode and compare tests.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Our main development platforms are of the Unix family, which doesn't
have the same strictness regarding a shared library being consistent
with the contents of the ld script (.map file, on Linux and Solaris)
as Windows is with the contents of the .def file or VMS is with the
linker symb_vector option.
To eliminate surprises, we therefore need to make sure to check that
the contents of the .map file is matched with the shared library, at
least to check that the shared library isn't missing any symbols that
should be present.
This test isn't absolutely perfect, as it will only check the symbols
that would be present on Linux / Solaris and will therefore miss those
that would only appear on Windows or VMS. On the other hand, those
platform specific are few and far apart in time, so it's not likely
they will pose a problem.
Reviewed-by: Matt Caswell <matt@openssl.org>
Add copyright to most .pl files
This does NOT cover any .pl file that has other copyright in it.
Most of those are Andy's but some are public domain.
Fix typo's in some existing files.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The simple reason is that the pre-generated files are mainly for Unix.
The VMS variants look slightly different, so comparing will always fail.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Suppress CT callbacks with aNULL or PSK ciphersuites that involve
no certificates. Ditto when the certificate chain is validated via
DANE-TA(2) or DANE-EE(3) TLSA records. Also skip SCT processing
when the chain is fails verification.
Move and consolidate CT callbacks from libcrypto to libssl. We
also simplify the interface to SSL_{,CTX_}_enable_ct() which can
specify either a permissive mode that just collects information or
a strict mode that requires at least one valid SCT or else asks to
abort the connection.
Simplified SCT processing and options in s_client(1) which now has
just a simple pair of "-noct" vs. "-ct" options, the latter enables
the permissive callback so that we can complete the handshake and
report all relevant information. When printing SCTs, print the
validation status if set and not valid.
Signed-off-by: Rob Percival <robpercival@google.com>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Currently, SSL tests are configured via command-line switches to
ssltest.c. This results in a lot of duplication between ssltest.c and
apps, and a complex setup. ssltest.c is also simply old and needs
maintenance.
Instead, we already have a way to configure SSL servers and clients, so
we leverage that. SSL tests can now be configured from a configuration
file. Test servers and clients are configured using the standard
ssl_conf module. Additional test settings are configured via a test
configuration.
Moreover, since the CONF language involves unnecessary boilerplate, the
test conf itself is generated from a shorter Perl syntax.
The generated testcase files are checked in to the repo to make
it easier to verify that the intended test cases are in fact run; and to
simplify debugging failures.
To demonstrate the approach, min/max protocol tests are converted to the
new format. This change also fixes MinProtocol and MaxProtocol
handling. It was previously requested that an SSL_CTX have both the
server and client flags set for these commands; this clearly can never work.
Guide to this PR:
- test/ssl_test.c - test framework
- test/ssl_test_ctx.* - test configuration structure
- test/handshake_helper.* - new SSL test handshaking code
- test/ssl-tests/ - test configurations
- test/generate_ssl_tests.pl - script for generating CONF-style test
configurations from perl inputs
Reviewed-by: Richard Levitte <levitte@openssl.org>
A new X509_VERIFY_PARAM_set_auth_level() function sets the
authentication security level. For verification of SSL peers, this
is automatically set from the SSL security level. Otherwise, for
now, the authentication security level remains at (effectively) 0
by default.
The new "-auth_level" verify(1) option is available in all the
command-line tools that support the standard verify(1) options.
New verify(1) tests added to check enforcement of chain signature
and public key security levels. Also added new tests of enforcement
of the verify_depth limit.
Updated documentation.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Since OpenSSL::Test only redirects stderr to /dev/null when being run
through non-verbose test harness, this change allows the stderr output
to be displayed when verbosity is requested.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Previously, it was sufficient to have certSign in keyUsage when the
basicConstraints extension was missing. That is still accepted in
a trust anchor, but is no longer accepted in an intermediate CA.
Reviewed-by: Rich Salz <rsalz@openssl.org>
According to documentation, perl's Math::BigInt does floored division,
i.e. the bdiv function does 1 / -4 = -1. OpenSSL's BN_div, as well as
bc, do truncated division, i.e. 1 / -4 = 0.
We need to compensate for that difference in test/recipes/bc.pl to
make sure to verify the bntest results under its own conditions, by
dividing the absolute values of the given numbers and fixup the
result's negativity afterwards.
Closes RT#4485
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
* Clear proposed, along with selected, before looking at ClientHello
* Add test case for above
* Clear NPN seen after selecting ALPN on server
* Minor documentation updates
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
In most builds, we can assume that engines live in the build tree
subdirectory "engines". This was hard coded into the tests that use
the engine ossltest.
However, that hard coding is tedious, it would need to be done in
every test recipe, and it's an incorrect assumption in some cases.
This change has us play it safe and let the build files tell the
testing framework where the engines are.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
TLSProxy starts s_server and specifies the number of client connects
it should expect. After that s_server is supposed to close down
automatically. However, if another test is then run then TLSProxy
will start a new instance of s_server. If the previous instance
hasn't closed down yet then the new instance can fail to bind to
the socket.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This commit adds the general verify options of ocsp, verify,
cms, etc. to the openssl timestamping app as suggested by
Stephen N. Henson in [openssl.org #4287]. The conflicting
"-policy" option of "openssl ts" has been renamed to
"-tspolicy". Documentation and tests have been updated.
CAVE: This will break code, which currently uses the "-policy"
option.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
While insignificant on Unix like systems, this is significant on
systems like VMS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Running test_ssl with HARNESS_VERBOSE results in lots of spurious warnings
about an inability to load the CT config file. This fixes it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
ct_test assumed it's run in the source directory and failed when built
elsewhere. It still defaults to that, but can be told another story
with the environment variables CT_DIR and CERTS_DIR.
Test recipe updated to match.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
ct_test assumed it's run in the source directory and failed when built
elsewhere. It still defaults to that, but can be told another story
with the environment variables CT_DIR and CERTS_DIR.
Test recipe updated to match.
Reviewed-by: Matt Caswell <matt@openssl.org>
* Perform ALPN after the SNI callback; the SSL_CTX may change due to
that processing
* Add flags to indicate that we actually sent ALPN, to properly error
out if unexpectedly received.
* clean up ssl3_free() no need to explicitly clear when doing memset
* document ALPN functions
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
The new afalg test should have a copyright date of 2016. Also an
incorrect buffer was being sent to EVP_CipherFinal_ex when
decrypting.
Reviewed-by: Richard Levitte <levitte@openssl.org>
1) Simplify code with better PACKET methods.
2) Make broken SNI parsing explicit. SNI was intended to be extensible
to new name types but RFC 4366 defined the syntax inextensibly, and
OpenSSL has never parsed SNI in a way that would allow adding a new name
type. RFC 6066 fixed the definition but due to broken implementations
being widespread, it appears impossible to ever extend SNI.
3) Annotate resumption behaviour. OpenSSL doesn't currently handle all
extensions correctly upon resumption. Annotate for further clean-up.
4) Send an alert on ALPN protocol mismatch.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Specifies a callback that will, in the future, be used by the SSL code to
decide whether to abort a connection on Certificate Transparency grounds.
Reviewed-by: Ben Laurie <ben@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
We were kinda sorta using a mix of $disabled{"static-engine" and
$disabled{"dynamic-engine"} in Configure. Let's avoid confusion,
choose one of them and stick to it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
They depend on this feature because they use the engine ossltest,
which is only available as a dynamic engine.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Adapted from BoringSSL. Added a test.
The extension parsing code is already attempting to already handle this for
some individual extensions, but it is doing so inconsistently. Duplicate
efforts in individual extension parsing will be cleaned up in a follow-up.
Reviewed-by: Stephen Henson <steve@openssl.org>
In the early stages of creating the new test framework,
00-test_checkexes was a temporary check to ensure we had a recipe for
every test program in test/. By now, this test has fulfilled its
purpose, and we've learned how to make recipes properly. It's time
for this check to go away.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If the environment variable HARNESS_ACTIVE isn't defined or
HARNESS_VERBOSE is defined, it's probable that lots of output is
desired.
Reviewed-by: Rich Salz <rsalz@openssl.org>
To enable heartbeats for DTLS, configure with enable-heartbeats.
Heartbeats for TLS have been completely removed.
This addresses RT 3647
Reviewed-by: Richard Levitte <levitte@openssl.org>
To be able to run tests when we've built in a directory other than
the source tree, the testing framework needs a few adjustments.
test/testlib/OpenSSL/Test.pm needs to know where it can find
shlib_wrap.sh, and a number of other tests need to be told a different
place to find engines than what they may be able to figure out on
their own. Relying to $TOP is not enough, $SRCTOP and $BLDTOP can be
used as an alternative.
As part of this change, top_file and top_dir are removed and
srctop_file, bldtop_file, srctop_dir and bldtop_dir take their place.
Reviewed-by: Ben Laurie <ben@openssl.org>
Adds a set of tests for the newly rewritten DTLSv1_listen function.
The test pokes various packets at the function and then checks
the return value and the data written out to ensure it is what we
would have expected.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
This uilds on the same way of checking for availability as we do in
TLSProxy. We use all IP factories we know of, starting with those who
know both IPv6 and IPv4 and ending with the one that only knows IPv4
and cache their possible success as foundation for checking the
available of each IP domain.
80-test_ssl.t has bigger chances of working on platforms that do not
run both IP domains.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The test program clienthello checks TLS extensions, so there's no
point running it when no TLS protocol is available.
Reviewed-by: Ben Laurie <ben@openssl.org>
This makes use of TLSProxy, which was expanded to use IO::Socket::IP
(which is a core perl module) or IO::Socket::INET6 (which is said to
be more popular) instead IO::Socket::INET if one of them is installed.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
This adds a couple of simple tests to see that SSL traffic using the
reimplemented BIO_s_accept() and BIO_s_connect() works as expected,
both on IPv4 and on IPv6.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
When auxiliary data contains only reject entries, continue to trust
self-signed objects just as when no auxiliary data is present.
This makes it possible to reject specific uses without changing
what's accepted (and thus overring the underlying EKU).
Added new supported certs and doubled test count from 38 to 76.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
This includes basic constraints, key usages, issuer EKUs and auxiliary
trust OIDs (given a trust suitably related to the intended purpose).
Added tests and updated documentation.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
top_dir() are used to create directory names, top_file() should be
used for files. In a Unixly environment, that doesn't matter, but...
Reviewed-by: Rich Salz <rsalz@openssl.org>
It seems that Test::More doesn't like 0 tests, a line like this raises
an error and stops the recipe entirely:
plan tests => 0;
So we need to check for 0 tests beforehand and skip the subtest
explicitely in that case.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Missing SKIP: block in SSL unit tests for DTLS and TLS version tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
It is sometimes useful (especially in automated tests) to supply
multiple trusted or untrusted certificates via separate files rather
than have to prepare a single file containing them all.
To that end, change verify(1) to accept these options zero or more
times. Also automatically set -no-CAfile and -no-CApath when
-trusted is specified.
Improve verify(1) documentation, which could still use some work.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The GOST engine is now out of date and is removed by this commit. An up
to date GOST engine is now being maintained in an external repository.
See:
https://wiki.openssl.org/index.php/Binaries
Reviewed-by: Richard Levitte <levitte@openssl.org>
Some users want to disable SSL 3.0/TLS 1.0/TLS 1.1, and enable just
TLS 1.2. In the future they might want to disable TLS 1.2 and
enable just TLS 1.3, ...
This commit makes it possible to disable any or all of the TLS or
DTLS protocols. It also considerably simplifies the SSL/TLS tests,
by auto-generating the min/max version tests based on the set of
supported protocols (425 explicitly written out tests got replaced
by two loops that generate all 425 tests if all protocols are
enabled, fewer otherwise).
Reviewed-by: Richard Levitte <levitte@openssl.org>
On some platforms, the shell will determine what attributes a file
will have, so while the program might think it's safely outputting
binary data, it's not always true.
For the sake of the tests, it's therefore safer to use -out than to
use redirection.
Reviewed-by: Rich Salz <rsalz@openssl.org>
