The naming of generated assembler wasn't done quite right. There are
assembler files that are generated from a perl script, and there are
those who are not. Only the former must be renamed to the platform
specific asm extension.
Furthermore, we need to make sure that 'OSSL_provider_init' isn't case
sensitive on VMS, to allow for the least surprise for provider
builders.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8529)
These will be used to point out general OpenSSL modules directory.
ENGINE modules are kept apart for backward compatibility.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8287)
The only thing that makes an ENGINE module special is its entry
points. Other than that, it's a normal dynamically loadable module,
nothing special about it. This change has us stop pretending anything
else.
We retain using ENGINE as a term for installation, because it's
related to a specific installation directory, and we therefore also
mark ENGINE modules specifically as such with an attribute in the
build.info files.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8147)
Trim trailing whitespace. It doesn't match OpenSSL coding standards,
AFAICT, and it can cause problems with git tooling.
Trailing whitespace remains in test data and external source.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8092)
There was a hack specifically for VMS, which involved setting a make
variable to indicate that test/libtestutil contains a 'main'.
Instead, we use the new attributes 'has_main' to indicate this, and
let the VMS build file template fend with it appropriately.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8125)
We have two classes of scripts to be installed, those that are
installed as "normal" programs, and those that are installed as "misc"
scripts. These classes are installed in different locations, so the
build file templates must pay attention.
Because we didn't have the tools to indicate what scripts go where, we
had these scripts hard coded in the build template files, with the
maintenance issues that may cause. Now that we have attributes, those
can be used to classify the installed scripts, and have the build file
templates simply check the attributes to know what's what.
Furthermore, the 'tsget.pl' script exists both as 'tsget.pl' and
'tsget', which is done by installing a symbolic link (or copy). This
link name is now given through an attribute, which results in even
less hard coding in the Unix Makefile template.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7581)
This means that all PROGRAMS_NO_INST, LIBS_NO_INST, ENGINES_NO_INST
and SCRIPTS_NO_INST are changed to be PROGRAM, LIBS, ENGINES and
SCRIPTS with the associated attribute 'noinst'.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7581)
Add platform::VMS, which is a generic VMS module. Additional modules
to support specific building aspects (such as specific compilers) may
be added later, but since we currently work on file names and those
are generic enough, this is also enough.
This reworks Configurations/descrip.mms.tmpl to work out product names
in platform::VMS terms. Something to be noted is that the new
functionality ignores the *_extension config attributes, as they were
never used. VMS is very consistent in its use of extensions, so there
is no reason to believe much will change in this respect.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7473)
It turned out that .S files aren't to be treated as lightly as I
thought. They need to go through a preprocessing step, which .s files
don't need to.
Corrects #7703
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7889)
Since `$config{version}` and `$config{version_num}` were removed
in commit 3a63dbef15, the configure output displays an empty
version number string in parentheses instead of the version number.
This pull request fixes that by adding new config variables
`version` and `full_version`, analogous to `OPENSSL_VERSION_STR`
and `OPENSSL_FULL_VERSION_STR`.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7841)
We're strictly use version numbers of the form MAJOR.MINOR.PATCH.
Letter releases are things of days past.
The most central change is that we now express the version number with
three macros, one for each part of the version number:
OPENSSL_VERSION_MAJOR
OPENSSL_VERSION_MINOR
OPENSSL_VERSION_PATCH
We also provide two additional macros to express pre-release and build
metadata information (also specified in semantic versioning):
OPENSSL_VERSION_PRE_RELEASE
OPENSSL_VERSION_BUILD_METADATA
To get the library's idea of all those values, we introduce the
following functions:
unsigned int OPENSSL_version_major(void);
unsigned int OPENSSL_version_minor(void);
unsigned int OPENSSL_version_patch(void);
const char *OPENSSL_version_pre_release(void);
const char *OPENSSL_version_build_metadata(void);
Additionally, for shared library versioning (which is out of scope in
semantic versioning, but that we still need):
OPENSSL_SHLIB_VERSION
We also provide a macro that contains the release date. This is not
part of the version number, but is extra information that we want to
be able to display:
OPENSSL_RELEASE_DATE
Finally, also provide the following convenience functions:
const char *OPENSSL_version_text(void);
const char *OPENSSL_version_text_full(void);
The following macros and functions are deprecated, and while currently
existing for backward compatibility, they are expected to disappear:
OPENSSL_VERSION_NUMBER
OPENSSL_VERSION_TEXT
OPENSSL_VERSION
OpenSSL_version_num()
OpenSSL_version()
Also, this function is introduced to replace OpenSSL_version() for all
indexes except for OPENSSL_VERSION:
OPENSSL_info()
For configuration, the option 'newversion-only' is added to disable all
the macros and functions that are mentioned as deprecated above.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7724)
We only convert lowercase .s to .asm, that turned out not to be sufficient.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7703)
We only had the main 'install' target depend on 'all'. This changes
the dependencies so targets like install_dev, install_runtime_libs,
install_engines and install_programs depend on build targets that are
correspond to them more specifically. This increases the parallel
possibilities.
Fixes#7466
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7583)
When trying 'make -j{n} install', you may occasionally run into
trouble because to sub-targets (install_dev and install_runtime) try
to install the same shared libraries. That makes parallel install
difficult.
This is solved by dividing install_runtime into two parts, one for
libraries and one for programs, and have install_dev depend on
install_runtime_libs instead of installing the shared runtime
libraries itself.
Fixes#7466
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7583)
Some modules are built with case insensitive (uppercase) symbols on
VMS. This needs to be reflected in the export symbol vector.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7347)
Move the .num updating functionality to util/mknum.pl.
Rewrite util/mkdef.pl to create .def / .map / .opt files exclusively,
using the separate ordinals reading module.
Adapt the build files.
Adapt the symbol presence test.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7191)
The generation of linker scripts was badly balanced, as all sorts of
platform dependent stuff went into the top build.info, when that part
should really be made as simply and generic as possible.
Therefore, we move a lot of the "magic" to the build files templates,
since they are the place for platform dependent things. What remains
is to parametrize just enough in the build.info file to generate the
linker scripts correctly for each associated library.
"linker script" is a term usually reserved for certain Unix linkers.
However, we only use them to say what symbols should be exported, so
we use the term loosely for all platforms. The internal extension is
'.ld', and is changed by the build file templates as appropriate for
each target platform.
Note that this adds extra meaning to the value of the shared_target
attribute.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7333)
The possibility to do this was killed when we started producing object
file names with encoded intention (and possibly different builds), and
leads to build errors.
With that, 'libobj2shlib' is renamed to 'obj2shlib' to reflect this
design change. The old name is still used if the new one isn't
available, for the sake of backward compatibility.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7198)
This is in preparation for having separate CFLAGS variables for static
and for shared library builds.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7159)
OpenSSL 1.1.0 supports the use of this environment variable for
passing to the build files. For the sake of backward compatibility,
we keep it.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/6668)
Purpose of build_all_generated is to execute all the rules that require
perl, so that one can copy the tree to system with compiler but without
perl. This commit removes last dependencies on perl.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5929)
Computing the value of the GENERATED variable in the build file
templates is somewhat overcomplicated, and because of possible
duplication errors, changes are potentially error prone.
Looking more closely at how this list is determined, it can be
observed that the exact list of files to check is consistently
available in all the values found in the %unified_info tables
'depends', 'sources' and 'shared_sources', and all that's needed is to
filter those values so only those present as keys in the 'generate'
table are left.
This computation is also common for all build files, so due to its
apparent complexity, we move it to common0.tmpl, with the result left
in a global variable (@generated), to be consumed by all build file
templates.
common0.tmpl is included among the files to process when creating
build files, but unlike common.tmpl, it comes first of all.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5930)
In the end, it's more efficient to only have one perl instance (that
loads configdata.pm) dealing with dependency files than running one
(that still loads configdata.pm) for each such file.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5631)
It seems that only gcc -MMD produces dependency files that are "sane"
for our needs. For all other methods, some post processing is needed:
- 'makedepend' (Unix) insists that object files are located in the
same spot as the source file.
- 'cl /Zs /showIncludes' (Visual C) has "Note: including file: " where
we'd like to see the object.
- 'CC/DECC' (VMS) insists that the object file is located in the
current directory, i.e. it strips away all directory information.
So far, we've managed this (except for the VMS case) with individual
uncommented perl command lines directly in the build file template.
We're now collecting these diverse hacks into one perl script that
takes an argument to tell what kind of input to expect and that
massages whatever it gets on STDIN and outputs the result on STDOUT.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5591)
With the help of the perl script util/add-depends.pl, which takes all
its information directly from configdata.pm, the dependency adding
procedure can be streamlined for all support platforms.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5606)
With the support of "make variables" comes the possibility for the
user to override them. However, we need to make a difference between
defaults that we use (and that should be overridable by the user) and
flags that are crucial for building OpenSSL (should not be
overridable).
Typically, overridable flags are those setting optimization levels,
warnings levels, that kind of thing, while non-overridable flags are,
for example, macros that indicate aspects of how the config target
should be treated, such as L_ENDIAN and B_ENDIAN.
We do that differentiation by allowing upper case attributes in the
config targets, named exactly like the "make variables" we support,
and reserving the lower case attributes for non-overridable project
flags.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5534)
The reason for this is that some of the C flags affect built in macros
that we may depend on.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5436)
The make variables LIB_CFLAGS, DSO_CFLAGS and so on were used in
addition to CFLAGS and so on. This works without problem on Unix and
Windows, where options with different purposes (such as -D and -I) can
appear anywhere on the command line and get accumulated as they come.
This is not necessarely so on VMS. For example, macros must all be
collected and given through one /DEFINE, and the same goes for
inclusion directories (/INCLUDE).
So, to harmonize all platforms, we repurpose make variables starting
with LIB_, DSO_ and BIN_ to be all encompassing variables that
collects the corresponding values from CFLAGS, CPPFLAGS, DEFINES,
INCLUDES and so on together with possible config target values
specific for libraries DSOs and programs, and use them instead of the
general ones everywhere.
This will, for example, allow VMS to use the exact same generators for
generated files that go through cpp as all other platforms, something
that has been impossible to do safely before now.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5357)
Instead of having the knowledge of the exact flags to run the C
preprocessor only and have it output on standard output in the deeper
recesses of the build file template, make it a config parameter, or
rely on build CPP in value ('$(CC) -E' on Unix).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/5356)
It was a bit absurd to have this being specially handled in the build
file templates, especially that we have the 'includes' attribute.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5296)
Configurations/descrip.mms.tmpl didn't treat the includes config
attribute very well. In fact, it didn't treat it at all!
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5295)
