Before OpenSSL 1.1.0, binaries were installed in a non-standard
location by default, and runpath directories were therefore added in
those binaries, to make sure the executables would be able to find the
shared libraries they were linked with.
With OpenSSL 1.1.0 and on, binaries are installed in standard
directories by default, and the addition of runpath directories is
therefore not needed any more.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Note that it relies on a trick from Configure, where file names for
object files made from C++ source get '.cc' replaced with '_cc.o' to
recognise them. This is needed so the correct compiler is used when
linking binaries.
Reviewed-by: Rich Salz <rsalz@openssl.org>
A note: this will form object file names by changing '.cc' to
'_cc.o'. This will permit other configuration code to recognise these
object files were built for C++ rather than C.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This is an amendment to the september 8 commit titled "VMS: Don't
force symbol mixed case when building DSOs"
Reviewed-by: Rich Salz <rsalz@openssl.org>
This flag got moved after -xarch=v9 in 1.1.0 and had the unexpected
side effect of the compiler building for 32-bit v8plusa instead of v9.
GH#1521
CLA: none; trivial
Signed-off-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
This is generalised by having the following macros for stuff that won't
be installed:
NO_INST_LIB_CFLAGS, used instead of LIB_CFLAGS
NO_INST_DSO_CFLAGS, used instead of DSO_CFLAGS
NO_INST_BIN_CFLAGS, used instead of BIN_CFLAGS
They take values from corresponding target config fields if those are
defined, otherwise they take the respective values from LIB_CFLAGS,
DSO_CFLAGS and BIN_CFLAGS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Send a bit information to the build file template functions. For
src2obj(), the additional option 'product' holds the name of the final
file that the object file will go into. Additionally, the diverse
functions will get the option 'installed', with a value that evaluates
true if the final product is to be installed, otherwise false.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Improve interchangeability of aix*-gcc targets by linking shared
libraries with -static-libgcc, and address linking problems with
vendor compiler.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The background story is that util/shlib_wrap.sh was setting LD_PRELOAD
or similar platform dependent variables, just in case the shared
libraries were built with -rpath. Unfortunately, this doesn't work
too well with asan, msan or ubsan.
So, the solution is to forbid the combination of shared libraries,
-rpath and any of the sanity analyzers we can configure.
This changes util/shlib_wrap.sh so it only contains the code that sets
LD_PRELOAD when -rpath has been used when configuring.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In the case of using an independent makedepend, we had split that into
two separate recipes, one depending on the other. However, there are
cases where the makedepend recipe was always trying, but doesn't
update the time stamp of the .d file because there are no actual
changes, and thereby causing constant updates of the object files.
This change makes one recipe that takes care of both makedepend och
cc, thereby avoiding these extra updates.
Reviewed-by: Andy Polyakov <appro@openssl.org>
MIPS[32|64]R6 is binary and source incompatible with previous MIPS ISA
specifications. Fortunately it's still possible to resolve differences
in source code with standard pre-processor and switching to trap-free
version of addition and subtraction instructions.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Since vendor assembler can't assemble our modules with -KPIC flag,
it, assembly support, was not available as an option. But this
means lack of side-channel resistant code, which is incompatible
with security by todays standards.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Because some targets execute perl code that might die, we risk
incomplete lists. Make it so dying doesn't happen when we're listing
targets.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Most of the time, this isn't strictly needed. However, in the default
extern model (called relaxed refdef), symbols are treated as weak
common objects unless they are initialised. The librarian doesn't
include weak symbols in the (static) libraries, which renders them
invisible when linking a program with said those libraries, which is a
problem at times.
Using the strict refdef model is much more like standard C on all
other platforms, and thereby avoid the issues that come with the
relaxed refdef model.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The options RC4_CHUNK_LL, DES_PTR, and BF_PTR were removed by Rich
in commit 3e9e810f2e but were still
sticking around in a coupule configuration entries.
Since they're unused, remove them.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1390)
Experience shows that pod2html changes directory during its process
without properly adjusting the given source directory.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Instead, install the new one as openssl.cnf.dist (openssl.cnf-dist on
VMS), and only install it as openssl.cnf if that file doesn't already
exist.
Also, don't install with exec privileges on VMS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Windows never composes UTF-8 strings as result of user interaction
such as passing command-line argument. The only way to compose one
is programmatic conversion from WCHAR string, which in turn can be
picked up on command line.
[For reference, why not wmain, it's not an option on MinGW.]
Reviewed-by: Richard Levitte <levitte@openssl.org>
The way it was implemented before this change, the shared libraries
were installed twice. On a file system that supports file
generations, that's a waste. Slightly rearranging the install targets
solves the problem.
Reviewed-by: Rich Salz <rsalz@openssl.org>
On non-Windows platforms, shared libraries are both development and
runtime files. We only installed them as development files, this
makes sure they get installed as runtime files as well.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This adds a new target 'build_programs' and makes 'build_apps' and
'build_tests' aliases for it, for backward compatibility.
Reviewed-by: Rich Salz <rsalz@openssl.org>
With a number of tools, especially those coming with Visual Studio,
some command options are separated from their argument with a space,
others with a space. Since we parametrise them, we can't know
beforehand which it will be, so we must allow the input and output
options to have either.
However, spaces at the end of nmake macro values are trimmed, so allow
spaces to exist by adding a reference to an undefined macro at the end.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This is only done for the platforms where 'OPENSSL_USE_APPLINK' is defined.
Also, change the docs of OPENSSL_Applink to say where to find applink.c
in the installation directory.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The easiest way to take care of manifest files is to integrate them
into the associated binary (.exe or .dll). MT (the Manifest Tool) is
the utility to use for this.
Reviewed-by: Rich Salz <rsalz@openssl.org>
With OpenSSL 1.1 and on, the engines are tightly tied to the shared
library they're to be used with. That makes them depend on the
pointer size as well as the shared library version, and this gets
reflected in the name of the directory they're installed in.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Some Unix variants require shared libraries to have the execute
permissions set, or they won't be loadable or executable when loaded.
Among others, cygwin has this requirement.
Reviewed-by: Matt Caswell <matt@openssl.org>
$openssldir and $enginesdir were mistakenly made unavailable to other
perl fragments. They are still needed in the definition of CFLAGS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
OpenSSL engines are tied to the OpenSSL shared library versions,
starting with OpenSSL 1.1. We therefore need to install them in
directories which have the shared library version in it's name, to
easily allow multiple OpenSSL versions to be installed at the same
time.
For VMS, the change is a bit more involved, primarly because the top
installation directory was already versioned, *as well as* some of the
files inside. That's a bit too much. Version numbering in files is
also a bit different on VMS. The engines for shared library version
1.1 will therefore end up in OSSL$INSTROOT:[ENGINES0101.'arch']
('arch' is the architecture we build for)
Reviewed-by: Rich Salz <rsalz@openssl.org>
OpenSSL engines are tied to the OpenSSL shared library versions,
starting with OpenSSL 1.1. We therefore need to install them in
directories which have the shared library version in it's name, to
easily allow multiple OpenSSL versions to be installed at the same
time.
For Unix, the default installation directory is changed from
$PREFIX/lib/engines to $PREFIX/lib/engines-${major}_${minor} (mingw)
or $PREFIX/lib/engines-${major}.${minor} (all but mingw)
($PREFIX is the directory given for the configuration option --prefix,
and ${major} and ${minor} are the major and minor shared library
version numbers)
Reviewed-by: Rich Salz <rsalz@openssl.org>
OpenSSL engines are tied to the OpenSSL shared library versions,
starting with OpenSSL 1.1. We therefore need to install them in
directories which have the shared library version in it's name, to
easily allow multiple OpenSSL versions to be installed at the same
time.
For windows, the default installation directory is changed from
$PREFIX/lib/engines to $PREFIX/lib/engines-${major}_${minor}
($PREFIX is the directory given for the configuration option --prefix,
and ${major} and ${minor} are the major and minor shared library
version numbers)
Reviewed-by: Rich Salz <rsalz@openssl.org>
When creating the library $lib.olb, make sure the extension is there.
Otherwise, a logical name with the same name as the file in question
will redirect the creation elsewhere.
Reviewed-by: Tim Hudson <tjh@openssl.org>
On VMS, it's customary to have a procedure to check that the software
was installed correctly and can run as advertised.
The procedure added here is fairly simple, it checks that all
libraries are in place, that the header crypto.h is in place, and that
the command 'openssl version -a' runs without trouble.
Reviewed-by: Rich Salz <rsalz@openssl.org>
- The install top is versioned by default. However, only the major
version should be used.
- the default areas for certs, private keys an config files have
changed, now all prefixed with 'OSSL$'. This gets reflected in
cryptlib.h.
- [.VMS]openssl_startup.com.in had some faults regarding creating
rooted concealed logical names.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This makes it possible for script writers to lock on to a specific
version if they need to. Note that only the major version number is
used.
Reviewed-by: Rich Salz <rsalz@openssl.org>
$prefix was removed as part of the DESTDIR work. However, it was
still used to create the ENGINESDIR_dev and ENGINESDIR_dir variables,
so a restoration is needed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
DESTDIR can't be used on Windows the same way as on Unix, the device
part of the installation paths get in the way.
To remedy this, have INSTALLTOP, OPENSSLDIR and ENGINESDIR get
different values depending on if $(DESTDIR) is empty or not, and use
$(INSTALLTOP), $(OPENSSLDIR) and $(ENGINESDIR) alone.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This is just in case someone passed an inclusion path with the
configuration, and there are OpenSSL headers from another version
in there.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Since corresponding rule was removed from windows-makefile.tmpl out
of necessity, question popped if it's appropriate to harmonize even
unix-Makefile.tmpl. Note that as long as you work on single directory
'make lib<rary>.a' is effectively equivalent to 'make <dir/ectory>'
prior this modification.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Problem with Microsoft lib.exe is that it doesn't *update* modules
in .lib archive, but creates new one upon every invocation. As result
if a source file was updated and nmake was executed, a useless archive
with only one module was created. In other words one has to always
pass all .obj modules on command line, not only recently recompiled.
[This also creates dilemma for directory targets, e.g. crypto\aes,
that were added to simplify every-day life for developer. Since
whole idea behind those targets is to minimize the re-compile time
upon single file modification, the only sensible thing to do is to
omit intended library update.]
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
- User targets are now the same and generally do the same things
- configdata.pm depends on exactly the same files on all platforms
- VMS production of shared libraries is simplified
- VMS automatic dependency files get the extension .D rather than .MMS
Reviewed-by: Rich Salz <rsalz@openssl.org>
'DEPEND[]=file.h' becomes a special way to say that 'file.h' must be
generated before anything else is built. It's likely that a number
of source files depend on these header files, this provides a simple
way to make sure they are always generated even it the dependency data
hasn't been added to the build file yet.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The directories for the final products were never registered, it was
plain luck that intermediary files were in the same place and
registered the directory anyway.
Also, scripts are generated directly from source (binaries go through
intermadiary object files), so we need to explicitely make sure to
avoid registering the source directory unless it's an in source
build.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Previous build scheme allowed building just the stuff in one
subdirectory, like this:
make -C crypto/aes
Because the unified only has a top-level Makefile, this is not
possible with it. This change adds a replacement where each directory
we have something to build in becomes a target in its own right,
allowing building something like this:
make crypto/aes
The exception is the directory test, because we already have such a
target.
Reviewed-by: Stephen Henson <steve@openssl.org>
This applies when building out-of-source.
RT#4486
NOTE: we can't do the same for Unix, as Unix make doesn't handle this
type of issue. Also, directory specs are much less likely to have
spaces on Unix...
Reviewed-by: Matt Caswell <matt@openssl.org>
Someone wants to configure like this:
PERL="/usr/bin/env perl" ./config
The end goal is to get that in the #! line of CA.pl and a few other
scripts. That works well already, but in the Makefile, there were a
few lines looking like this:
PERL=$(PERL) $(PERL) whatever.pl ...
Those need some quoting.
RT#4311
Reviewed-by: Matt Caswell <matt@openssl.org>
Add Configure generated header files to $unified_info{generate}. This
makes sure the build files will pick them up with the rest for the
GENERATED macro, and thereby make sure they get cleaned away by 'make
clean'
Reviewed-by: Rich Salz <rsalz@openssl.org>
