Check for a failure and free a_tm as appropriate.
Found by Coverity
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5339)
Coverity was complaining because we checked if s->ctx is NULL and then
later on in the function deref s->ctx anyway. In reality if s->ctx is
NULL then this is an internal error.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/5334)
In PR #5295 it was decided that the locking api should remain private
and used only inside libcrypto. However, the locking functions were added
back to `libcrypto.num` by `mkdef.pl`, because the function prototypes
were still listed in `internal/rand.h`. (This header contains functions
which are internal, but shared between libcrypto and libssl.)
This commit moves the prototypes to `rand_lcl.h` and changes the names
to lowercase, following the convention therein. It also corrects an
outdated documenting comment.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5375)
configdata.pm -d prints out a lot of information, including a table
of what features are disabled, why, and the effect of that disablement
(in terms of preprocessor symbols defined and directories skipped).
The first column is already auto-sized, to easily accomodate future
disableable features with long names. Also auto-size the second column,
to accomodate future reasons for disablement with long names as well.
Failing to take such precautions results in stderr spew from
configdata.pm -d when such long reasons are in use:
Negative repeat count does nothing at ./configdata.pm line 14504.
Such output is pretty distracting from the actual desired output,
so try to avoid it if possible.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5371)
It's a convenient complement to OSSL_STORE_ctrl()
Suggested by Norm Green
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5363)
Avoid using crypto/modes/ghash-ia64.s, as it uses features that are
explicitely prohibited on VMS.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5357)
The make variables LIB_CFLAGS, DSO_CFLAGS and so on were used in
addition to CFLAGS and so on. This works without problem on Unix and
Windows, where options with different purposes (such as -D and -I) can
appear anywhere on the command line and get accumulated as they come.
This is not necessarely so on VMS. For example, macros must all be
collected and given through one /DEFINE, and the same goes for
inclusion directories (/INCLUDE).
So, to harmonize all platforms, we repurpose make variables starting
with LIB_, DSO_ and BIN_ to be all encompassing variables that
collects the corresponding values from CFLAGS, CPPFLAGS, DEFINES,
INCLUDES and so on together with possible config target values
specific for libraries DSOs and programs, and use them instead of the
general ones everywhere.
This will, for example, allow VMS to use the exact same generators for
generated files that go through cpp as all other platforms, something
that has been impossible to do safely before now.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5357)
The 'pp' function parameters of d2i_TYPE() and i2d_TYPE() are referenced
in the DESCRIPTION section as 'in' resp. 'out'. This commit renames the
references to 'ppin' resp. 'ppout' and adds an explaining sentence.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5365)
The s_client psk_use_session_cb callback has a comment stating that we
should ignore a key that isn't suitable for TLSv1.3. However we were
actually causing the connection to fail. Changing the return value fixes
the issue.
Also related to this is that the early_data extension was not marked as
TLSv1.3 only which it should be.
Fixes#5202
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/5205)
Commit 42d7d7dd6 turned this function from returning void to
returning an int error code. This instance of calling it was
missed.
Found by Coverity.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5338)
Instead of having the knowledge of the exact flags to run the C
preprocessor only and have it output on standard output in the deeper
recesses of the build file template, make it a config parameter, or
rely on build CPP in value ('$(CC) -E' on Unix).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/5356)
All VMS config targets were literally copies of each other, only
differing in what argument the parameter seeking function vms_info()
received (the pointer size).
This could be hugely simplified by letting vms_info() detect what
pointer size was desired from the desired config target name instead.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5364)
This is purported to save a few cycles, but makes the code less
obvious and more brittle, and in fact breaks on platforms where for
ABI continuity reasons there is a SHA2 implementation in libc, and
so EVP needs to call those to avoid conflicts.
A sufficiently good optimizer could simply generate the same entry
points for:
foo(...) { ... }
and
bar(...) { return foo(...); }
but, even without that, the different is negligible, with the
"winner" varying from run to run (openssl speed -evp sha384):
Old:
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes
sha384 28864.28k 117362.62k 266469.21k 483258.03k 635144.87k 649123.16k
New:
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes
sha384 30055.18k 120725.98k 272057.26k 482847.40k 634585.09k 650308.27k
Reviewed-by: Rich Salz <rsalz@openssl.org>
Without that, output comes one character per line. It's the same
issue as has been observed before, this happens when using write()
on a record oriented stream (possibly unbuffered too).
This also uncovered a bug in BIO_f_linebuffer, where this would cause
an error:
BIO_write(bio, "1\n", 1);
I.e. there's a \n just after the part of the string that we currently
ask to get written.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5352)
.. if avalable. STCK has an artificial delay to ensure uniqueness
which can result in a performance penalty if used heavily
concurrently.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5284)
Output copyright year depends on any input file(s) and the script.
This is not perfect, but better than what we had.
Also run 'make update'
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5350)
If the global DRBGs are allocated on the secure heap, then calling
CRYPTO_secure_malloc_done() inside main() will have no effect, unless
OPENSSL_cleanup() has been called explicitely before that, because
otherwise the DRBGs will still be allocated. So it is better to cleanup
the secure heap automatically at the end of OPENSSL_cleanup().
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5294)
The NIST standard presents two alternative ways for seeding the
CTR DRBG, depending on whether a derivation function is used or not.
In Section 10.2.1 of NIST SP800-90Ar1 the following is assessed:
The use of the derivation function is optional if either an
approved RBG or an entropy source provides full entropy output
when entropy input is requested by the DRBG mechanism.
Otherwise, the derivation function shall be used.
Since the OpenSSL DRBG supports being reseeded from low entropy random
sources (using RAND_POOL), the use of a derivation function is mandatory.
For that reason we change the default and replace the opt-in flag
RAND_DRBG_FLAG_CTR_USE_DF with an opt-out flag RAND_DRBG_FLAG_CTR_NO_DF.
This change simplifies the RAND_DRBG_new() calls.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5294)
The functions drbg_setup() and drbg_cleanup() used to duplicate a lot of
code from RAND_DRBG_new() and RAND_DRBG_free(). This duplication has been
removed, which simplifies drbg_setup() and makes drbg_cleanup() obsolete.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5294)
This commit adds three new accessors to the internal DRBG lock
int RAND_DRBG_lock(RAND_DRBG *drbg)
int RAND_DRBG_unlock(RAND_DRBG *drbg)
int RAND_DRBG_enable_locking(RAND_DRBG *drbg)
The three shared DRBGs are intended to be used concurrently, so they
have locking enabled by default. It is the callers responsibility to
guard access to the shared DRBGs by calls to RAND_DRBG_lock() and
RAND_DRBG_unlock().
All other DRBG instances don't have locking enabled by default, because
they are intendended to be used by a single thread. If it is desired,
locking can be enabled by using RAND_DRBG_enable_locking().
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5294)
Updated the NEWS file with the most significant items from CHANGES
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5333)
when the data block ends with SPACEs or NULs.
The problem is, you can't see if the data ends
with SPACE or NUL or a combination of both.
This can happen for instance with
openssl rsautl -decrypt -hexdump
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5328)
On the client we calculate the age of the ticket in seconds but the server
may work in ms. Due to rounding errors we could overestimate the age by up
to 1s. It is better to underestimate it. Otherwise, if the RTT is very
short, when the server calculates the age reported by the client it could
be bigger than the age calculated on the server - which should never happen.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5306)
The no-tls1_2 option does not work properly in conjunction with TLSv1.3
being enabled (which is now the default). This commit fixes the issues.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5301)
- pem2.h is empty, so pem.h doesn't need to include it.
- pem2.h once declared ERR_load_PEM_strings(), so it should now
include pemerr.h
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5150)
