If one of the perlasm xlate drivers crashes, OpenSSL's build will
currently swallow the error and silently truncate the output to however
far the driver got. This will hopefully fail to build, but better to
check such things.
Handle this by checking for errors when closing STDOUT (which is a pipe
to the xlate driver).
This is the OpenSSL 1.1.1 version of
https://github.com/openssl/openssl/pull/10883 and
https://github.com/openssl/openssl/pull/10930.
Reviewed-by: Mark J. Cox <mark@awe.com>
Reviewed-by: Paul Dale David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/10931)
Configure creates an empty crypto/include which
gets not cleaned up with make distclean.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10893)
The New Year has caused various files to appear out of date to "make
update". This causes Travis to fail. Therefore we update those files.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10739)
We have always a carry in %rcx or %rbx in range 0..2
from the previous stage, that is added to the result
of the 64-bit square, but the low nibble of any square
can only be 0, 1, 4, 9.
Therefore one "adcq $0, %rdx" can be removed.
Likewise in the ADX code we can remove one
"adcx %rbp, $out" since %rbp is always 0, and carry is
also zero, therefore that is a no-op.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10575)
There is an overflow bug in the x64_64 Montgomery squaring procedure used in
exponentiation with 512-bit moduli. No EC algorithms are affected. Analysis
suggests that attacks against 2-prime RSA1024, 3-prime RSA1536, and DSA1024 as a
result of this defect would be very difficult to perform and are not believed
likely. Attacks against DH512 are considered just feasible. However, for an
attack the target would have to re-use the DH512 private key, which is not
recommended anyway. Also applications directly using the low level API
BN_mod_exp may be affected if they use BN_FLG_CONSTTIME.
CVE-2019-1551
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/10575)
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10454)
(cherry picked from commit 97a986f78289fef71bf8778dc4763458e983750c)
clang imposes some restrictions on the assembler code that
gcc does not.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10330)
(cherry picked from commit 6f93f06135cbbd36c3fe98d63717e8303a5d559b)
Conflicts:
crypto/perlasm/s390x.pm (non-existant)
crypto/s390xcpuid.pl (code to be changed non-existant)
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10209)
(cherry picked from commit 305bf9c8668aff78e668131061f4eb088457be5f)
PR https://github.com/openssl/openssl/pull/10122 introduced changes to
the BN_gcd function and the control logic inside it accessed `g->d[0]`
irrespective of `g->top`.
When BN_add is called, in case the result is zero, `BN_zero` is called.
The latter behaves differently depending on the API compatibility level
flag: normally `g->d[0]` is cleared but in `no-deprecated` builds only
`g->top` is set to zero.
This commit uses bitwise logic to ensure that `g` is treated as zero if
`g->top` is zero, irrespective of `g->d[0]`.
Co-authored-by: Nicola Tuveri <nic.tuv@gmail.com>
(cherry picked from commit 8aca4bfe8213402c80abc06fe25121461f79128d)
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10232)
This commit replaces the current `BN_gcd` function with a constant-time
GCD implementation.
(cherry picked from commit f3c4adfc7eb13e9eff514039b4c60b457bdba433)
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10122)
This commit aims at refactoring the `BN_rshift` by making it a wrapper
around `bn_rshift_fixed_top`, in order to match the current design of
`BN_lshift`, as suggested in the discussion at
https://github.com/openssl/openssl/pull/10122#discussion_r332474277 .
As described in the code, by refactoring this function, `BN_rshift`
provides a constant-time behavior for sufficiently[!] zero-padded inputs
under the following assumptions: `|n < BN_BITS2|` or `|n / BN_BITS2|`
being non-secret.
Notice that `BN_rshift` returns a canonical representation of the
BIGNUM, if a `fixed_top` representation is required, the caller should
call `bn_rshift_fixed_top` instead.
(cherry picked from commit 8eba6de59e2b06f23c214344423a5a618d1c9ffd)
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10196)
Make the include guards consistent by renaming them systematically according
to the naming conventions below
The public header files (in the 'include/openssl' directory) are not changed
in 1.1.1, because it is a stable release.
For the private header files files, the guard names try to match the path
specified in the include directives, with all letters converted to upper case
and '/' and '.' replaced by '_'. An extra 'OSSL_' is added as prefix.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9681)
Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like
'*_lcl.h', '*_local.h', or '*_int.h'
This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9681)
Currently, there are two different directories which contain internal
header files of libcrypto which are meant to be shared internally:
While header files in 'include/internal' are intended to be shared
between libcrypto and libssl, the files in 'crypto/include/internal'
are intended to be shared inside libcrypto only.
To make things complicated, the include search path is set up in such
a way that the directive #include "internal/file.h" could refer to
a file in either of these two directoroes. This makes it necessary
in some cases to add a '_int.h' suffix to some files to resolve this
ambiguity:
#include "internal/file.h" # located in 'include/internal'
#include "internal/file_int.h" # located in 'crypto/include/internal'
This commit moves the private crypto headers from
'crypto/include/internal' to 'include/crypto'
As a result, the include directives become unambiguous
#include "internal/file.h" # located in 'include/internal'
#include "crypto/file.h" # located in 'include/crypto'
hence the superfluous '_int.h' suffixes can be stripped.
The files 'store_int.h' and 'store.h' need to be treated specially;
they are joined into a single file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9681)
This issue was partially addressed by commit
972c87dfc7, which hardened its callee
BN_num_bits_word() to avoid leaking the most-significant word of its
argument via branching and memory access pattern.
The commit message also reported:
> There are a few places where BN_num_bits is called on an input where
> the bit length is also secret. This does *not* fully resolve those
> cases as we still only look at the top word.
BN_num_bits() is called directly or indirectly (e.g., through
BN_num_bytes() or BN_bn2binpad() ) in various parts of the `crypto/ec`
code, notably in all the currently supported implementations of scalar
multiplication (in the generic path through ec_scalar_mul_ladder() as
well as in dedicated methods like ecp_nistp{224,256,521}.c and
ecp_nistz256.c).
Under the right conditions, a motivated SCA attacker could retrieve the
secret bitlength of a secret nonce through this vulnerability,
potentially leading, ultimately, to recover a long-term secret key.
With this commit, exclusively for BIGNUMs that are flagged with
BN_FLG_CONSTTIME, instead of accessing only bn->top, all the limbs of
the BIGNUM are accessed up to bn->dmax and bitwise masking is used to
avoid branching.
Memory access pattern still leaks bn->dmax, the size of the lazily
allocated buffer for representing the BIGNUM, which is inevitable with
the current BIGNUM architecture: reading past bn->dmax would be an
out-of-bound read.
As such, it's the caller responsibility to ensure that bn->dmax does not
leak secret information, by explicitly expanding the internal BIGNUM
buffer to a public value sufficient to avoid any lazy reallocation
while manipulating it: this should be already done at the top level
alongside setting the BN_FLG_CONSTTIME.
Thanks to David Schrammel and Samuel Weiser for reporting this issue
through responsible disclosure.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/9511)
(cherry picked from commit 8b44198b916015f77bef1befa26edb48ad8a0238)
CLA: trivial
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9295)
Happens when trying to generate 4 or 5 bit safe primes.
[extended tests]
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9311)
(cherry picked from commit 291f616ced)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9123)
(cherry picked from commit e98e586b31)
There are some compiling errors for mips32r6 and mips64r6:
crypto/bn/bn-mips.S:56: Error: opcode not supported on this processor: mips2 (mips2) `mulu $1,$12,$7'
crypto/mips_arch.h: Assembler messages:
crypto/mips_arch.h:15: Error: junk at end of line, first unrecognized character is `&'
Signed-off-by: Hua Zhang <hua.zhang1974@hotmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8464)
(cherry picked from commit 1b9c5f2e2f)
Thanks to David Benjamin who reported this, performed the analysis and
suggested the patch. I have incorporated some of his analysis in the
comments below.
This issue can cause an out-of-bounds read. It is believed that this was
not reachable until the recent "fixed top" changes. Analysis has so far
only identified one code path that can encounter this - although it is
possible that others may be found. The one code path only impacts 1.0.2 in
certain builds. The fuzzer found a path in RSA where iqmp is too large. If
the input is all zeros, the RSA CRT logic will multiply a padded zero by
iqmp. Two mitigating factors:
- Private keys which trip this are invalid (iqmp is not reduced mod p).
Only systems which take untrusted private keys care.
- In OpenSSL 1.1.x, there is a check which rejects the oversize iqmp,
so the bug is only reproducible in 1.0.2 so far.
Fortunately, the bug appears to be relatively harmless. The consequences of
bn_cmp_word's misbehavior are:
- OpenSSL may crash if the buffers are page-aligned and the previous page is
non-existent.
- OpenSSL will incorrectly treat two BN_ULONG buffers as not equal when they
are equal.
- Side channel concerns.
The first is indeed a concern and is a DoS bug. The second is fine in this
context. bn_cmp_word and bn_cmp_part_words are used to compute abs(a0 - a1)
in Karatsuba. If a0 = a1, it does not matter whether we use a0 - a1 or
a1 - a0. The third would be worth thinking about, but it is overshadowed
by the entire Karatsuba implementation not being constant time.
Due to the difficulty of tripping this and the low impact no CVE is felt
necessary for this issue.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8326)
(cherry picked from commit 576129cd72)
The add/double shortcut in ecp_nistz256-x86_64.pl left one instruction
point that did not unwind, and the "slow" path in AES_cbc_encrypt was
not annotated correctly. For the latter, add
.cfi_{remember,restore}_state support to perlasm.
Next, fill in a bunch of functions that are missing no-op .cfi_startproc
and .cfi_endproc blocks. libunwind cannot unwind those stack frames
otherwise.
Finally, work around a bug in libunwind by not encoding rflags. (rflags
isn't a callee-saved register, so there's not much need to annotate it
anyway.)
These were found as part of ABI testing work in BoringSSL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
GH: #8109
(cherry picked from commit c0e8e5007b)
ARMv8.3 adds pointer authentication extension, which in this case allows
to ensure that, when offloaded to stack, return address is same at return
as at entry to the subroutine. The new instructions are nops on processors
that don't implement the extension, so that the vetification is backward
compatible.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8205)
(cherry picked from commit 9a18aae5f2)
Trim trailing whitespace. It doesn't match OpenSSL coding standards,
AFAICT, and it can cause problems with git tooling.
Trailing whitespace remains in test data and external source.
Backport-of: https://github.com/openssl/openssl/pull/8092
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8134)
When the ret parameter is NULL the generated prime
is in rnd variable and not in ret.
CLA: trivial
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8076)
(cherry picked from commit 3d43f9c809)
Some Travis builds appear to fail because generated objects get
2019 copyrights now, and the diff complains.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7969)
Fixed-top interfaces tolerate zero-padded inputs and facilitate
constant-time-ness. bn_div_fixed_top tolerates zero-padded dividend,
but not divisor. It's argued that divisor's length is public even
when value is secret.
[extended tests]
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7589)
(cherry picked from commit 3a4a88f436)
and add template for constant-time bn_div_3_words.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7589)
(cherry picked from commit 3da2e9c4ee)
It's being replaced with constant-time alternative.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7589)
(cherry picked from commit b34446cca2)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/7599)
(cherry picked from commit dd41956d80)
This module includes bn.h via other headers, so it picks up the
definition from there and doesn't need to define them locally (any
more?). Worst case scenario, the redefinition may be different and
cause all sorts of compile errors.
Fixes#7227
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7287)
(cherry picked from commit dda5396aae)
