TLS1.0 and TLS1.1 say you SHOULD ignore unrecognised record types, but
TLS 1.2 says you MUST send an unexpected message alert. We swap to the
TLS 1.2 behaviour for all protocol versions to prevent issues where no
progress is being made and the peer continually sends unrecognised record
types, using up resources processing them.
Issue reported by 郭志攀
Reviewed-by: Tim Hudson <tjh@openssl.org>
The function ssl3_read_n() takes a parameter |clearold| which, if set,
causes any old data in the read buffer to be forgotten, and any unread data
to be moved to the start of the buffer. This is supposed to happen when we
first read the record header.
However, the data move was only taking place if there was not already
sufficient data in the buffer to satisfy the request. If read_ahead is set
then the record header could be in the buffer already from when we read the
preceding record. So with read_ahead we can get into a situation where even
though |clearold| is set, the data does not get moved to the start of the
read buffer when we read the record header. This means there is insufficient
room in the read buffer to consume the rest of the record body, resulting in
an internal error.
This commit moves the |clearold| processing to earlier in ssl3_read_n()
to ensure that it always takes place.
Reviewed-by: Richard Levitte <levitte@openssl.org>
A zero return from BIO_read()/BIO_write() could mean that an IO operation
is retryable. A zero return from SSL_read()/SSL_write() means that the
connection has been closed down (either cleanly or not). Therefore we
should not propagate a zero return value from BIO_read()/BIO_write() back
up the stack to SSL_read()/SSL_write(). This could result in a retryable
failure being treated as fatal.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If while calling SSL_peek() we read an empty record then we go into an
infinite loop, continually trying to read data from the empty record and
never making any progress. This could be exploited by a malicious peer in
a Denial Of Service attack.
CVE-2016-6305
GitHub Issue #1563
Reviewed-by: Rich Salz <rsalz@openssl.org>
Certain warning alerts are ignored if they are received. This can mean that
no progress will be made if one peer continually sends those warning alerts.
Implement a count so that we abort the connection if we receive too many.
Issue reported by Shi Lei.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This reverts commit 77a6be4dfc.
There were some unexpected side effects to this commit, e.g. in SSLv3 a
warning alert gets sent "no_certificate" if a client does not send a
Certificate during Client Auth. With the above commit this causes the
connection to abort, which is incorrect. There may be some other edge cases
like this so we need to have a rethink on this.
Reviewed-by: Tim Hudson <tjh@openssl.org>
A peer continually sending unrecognised warning alerts could mean that we
make no progress on a connection. We should abort rather than continuing if
we receive an unrecognised warning alert.
Thanks to Shi Lei for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
It is never valid to call ssl3_read_bytes with
type == SSL3_RT_CHANGE_CIPHER_SPEC, and in fact we check for valid values
for type near the beginning of the function. Therefore this check will never
be true and can be removed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Run util/openssl-format-source on ssl/
Some comments and hand-formatted tables were fixed up
manually by disabling auto-formatting.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Feedback on the previous SSLv2 ClientHello processing fix was that it
breaks layering by reading init_num in the record layer. It also does not
detect if there was a previous non-fatal warning.
This is an alternative approach that directly tracks in the record layer
whether this is the first record.
GitHub Issue #1298
Reviewed-by: Tim Hudson <tjh@openssl.org>
The MULTIBLOCK code uses a "jumbo" sized write buffer which it allocates
and then frees later. Pipelining however introduced multiple pipelines. It
keeps track of how many pipelines are initialised using numwpipes.
Unfortunately the MULTIBLOCK code was not updating this when in deallocated
its buffers, leading to a buffer being marked as initialised but set to
NULL.
RT#4618
Reviewed-by: Rich Salz <rsalz@openssl.org>
Fix some indentation at the same time
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1292)
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1264)
In some situations (such as when we receive a fragment of an alert)
we try to get the next packet but did not mark the current one as read,
meaning that we got the same record back again - leading to an infinite
loop.
Found using the BoringSSL test suite.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Sessions are stored on the session_ctx, which doesn't change after
SSL_set_SSL_CTX().
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Previously if we received an empty record we just threw it away and
ignored it. Really though if we get an empty record of a different content
type to what we are expecting then that should be an error, i.e. we should
reject out of context empty records. This commit makes the necessary changes
to achieve that.
RT#4395
Reviewed-by: Andy Polyakov <appro@openssl.org>
Windows was complaining about a unary minus operator being applied to an
unsigned type. It did seem to go on and do the right thing anyway, but the
code does look a little suspect. This fixes it.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
We used to use the wrec field in the record layer for keeping track of the
current record that we are writing out. As part of the pipelining changes
this has been moved to stack allocated variables to do the same thing,
therefore the field is no longer needed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
This is similar to SSL_pending() but just returns a 1 if there is data
pending in the internal OpenSSL buffers or 0 otherwise (as opposed to
SSL_pending() which returns the number of bytes available). Unlike
SSL_pending() this will work even if "read_ahead" is set (which is the
case if you are using read pipelining, or if you are doing DTLS). A 1
return value means that we have unprocessed data. It does *not* necessarily
indicate that there will be application data returned from a call to
SSL_read(). The unprocessed data may not be application data or there
could be errors when we attempt to parse the records.
Reviewed-by: Tim Hudson <tjh@openssl.org>
This capability is required for read pipelining. We will only read in as
many records as will fit in the read buffer (and the network can provide
in one go). The bigger the buffer the more records we can process in
parallel.
Reviewed-by: Tim Hudson <tjh@openssl.org>
With read pipelining we use multiple SSL3_RECORD structures for reading.
There are SSL_MAX_PIPELINES (32) of them defined (typically not all of these
would be used). Each one has a 16k compression buffer allocated! This
results in a significant amount of memory being consumed which, most of the
time, is not needed. This change swaps the allocation of the compression
buffer to be lazy so that it is only done immediately before it is actually
used.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Read pipelining is controlled in a slightly different way than with write
pipelining. While reading we are constrained by the number of records that
the peer (and the network) can provide to us in one go. The more records
we can get in one go the more opportunity we have to parallelise the
processing.
There are two parameters that affect this:
* The number of pipelines that we are willing to process in one go. This is
controlled by max_pipelines (as for write pipelining)
* The size of our read buffer. A subsequent commit will provide an API for
adjusting the size of the buffer.
Another requirement for this to work is that "read_ahead" must be set. The
read_ahead parameter will attempt to read as much data into our read buffer
as the network can provide. Without this set, data is read into the read
buffer on demand. Setting the max_pipelines parameter to a value greater
than 1 will automatically also turn read_ahead on.
Finally, the read pipelining as currently implemented will only parallelise
the processing of application data records. This would only make a
difference for renegotiation so is unlikely to have a significant impact.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Use the new pipeline cipher capability to encrypt multiple records being
written out all in one go. Two new SSL/SSL_CTX parameters can be used to
control how this works: max_pipelines and split_send_fragment.
max_pipelines defines the maximum number of pipelines that can ever be used
in one go for a single connection. It must always be less than or equal to
SSL_MAX_PIPELINES (currently defined to be 32). By default only one
pipeline will be used (i.e. normal non-parallel operation).
split_send_fragment defines how data is split up into pipelines. The number
of pipelines used will be determined by the amount of data provided to the
SSL_write call divided by split_send_fragment. For example if
split_send_fragment is set to 2000 and max_pipelines is 4 then:
SSL_write called with 0-2000 bytes == 1 pipeline used
SSL_write called with 2001-4000 bytes == 2 pipelines used
SSL_write called with 4001-6000 bytes == 3 pipelines used
SSL_write_called with 6001+ bytes == 4 pipelines used
split_send_fragment must always be less than or equal to max_send_fragment.
By default it is set to be equal to max_send_fragment. This will mean that
the same number of records will always be created as would have been
created in the non-parallel case, although the data will be apportioned
differently. In the parallel case data will be spread equally between the
pipelines.
Reviewed-by: Tim Hudson <tjh@openssl.org>
To enable heartbeats for DTLS, configure with enable-heartbeats.
Heartbeats for TLS have been completely removed.
This addresses RT 3647
Reviewed-by: Richard Levitte <levitte@openssl.org>
This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.
And then some hand-editing of other files.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Also tweak some of the code in demos/bio, to enable interactive
testing of BIO_s_accept's use of SSL_dup. Changed the sconnect
client to authenticate the server, which now exercises the new
SSL_set1_host() function.
Reviewed-by: Richard Levitte <levitte@openssl.org>
if we have a malloc |x = OPENSSL_malloc(...)| sometimes we check |x|
for NULL and sometimes we treat it as a boolean |if(!x) ...|. Standardise
the approach in libssl.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
A buggy application that call SSL_write with a different length after a
NBIO event could cause an OPENSSL_assert to be reached. The assert is not
actually necessary because there was an explicit check a little further
down that would catch this scenario. Therefore remove the assert an move
the check a little higher up.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The SSL variable |in_handshake| seems misplaced. It would be better to have
it in the STATEM structure.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Change various state machine functions to use the prefix ossl_statem
instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Clean up and remove lots of code that is now no longer needed due to the
move to the new state machine.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
This swaps the implementation of the client TLS state machine to use the
new state machine code instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
