If the output to stdout or the input from stdin is meant to be binary,
it's deeply unsetting to get the occasional LF converted to CRLF or
the other way around. If someone happens to forget to redirect stdin
or stdout, they will get gibberish anyway, line ending conversion will
not change that.
Therefore, let's not have dup_bio_* decide unilaterally what mode the
BIO derived from stdin and stdout, and rather let the app decide by
declaring the intended format.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The different apps had the liberty to decide whether they would open their
input and output files in binary mode or not, which could be confusing if
two different apps were handling the same type of file in different ways.
The solution is to centralise the decision of low level file organisation,
and that the apps would use a selection of formats to state the intent of
the file.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Most of all, we needed to sort out which ones are binary and which
ones are text, and make sure they are treated accordingly and
consistently so
Reviewed-by: Tim Hudson <tjh@openssl.org>
In some environments, such as firmware, the current system time is entirely
meaningless. Provide a clean mechanism to suppress the checks against it.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
When generating a private key, try to make the output file be readable
only by the owner. Put it in CHANGES file since it might be noticeable.
Add "int private" flag to apps that write private keys, and check that it's
set whenever we do write a private key. Checked via assert so that this
bug (security-related) gets fixed. Thanks to Viktor for help in tracing
the code-paths where private keys are written.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The module loading feature got broken a while ago, so restore it, but
have it a bit more explicit this time around.
Reviewed-by: Stephen Henson <steve@openssl.org>
Create app_load_config(), a routine to load config file. Remove the
"always load config" from the main app. Change the places that used to
load config to call the new common routine.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Given the pervasive nature of TLS extensions it is inadvisable to run
OpenSSL without support for them. It also means that maintaining
the OPENSSL_NO_TLSEXT option within the code is very invasive (and probably
not well tested). Therefore it is being removed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Typedef STRINT_PAIR to be the same as OPT_PAIR, and use that structure and
a bunch of tables instead of switch statements to lookup various values
out of the SSL/TLS message buffers. Shrinks a bunch of code.
Reviewed-by: Richard Levitte <levitte@openssl.org>
No point in proceeding if you're out of memory. So change
*all* OPENSSL_malloc calls in apps to use the new routine which
prints a message and exits.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove need for multiple arrays, parse the X509 name
one RDN at a time. Thanks to Andy for careful review.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Many functions had a BIO* parameter, and it was always called
with bio_err. Remove the param and just use bio_err.
Reviewed-by: Matt Caswell <matt@openssl.org>
Make setup_engine be a dummy if NO_ENGINE is enabled.
The option is not enabled if NO_ENGINE is enabled, so the one "wasted"
variable just sits there. Removes some variables and code.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This is merges the old "rsalz-monolith" branch over to master. The biggest
change is that option parsing switch from cascasding 'else if strcmp("-foo")'
to a utility routine and somethin akin to getopt. Also, an error in the
command line no longer prints the full summary; use -help (or --help :)
for that. There have been many other changes and code-cleanup, see
bullet list below.
Special thanks to Matt for the long and detailed code review.
TEMPORARY:
For now, comment out CRYPTO_mem_leaks() at end of main
Tickets closed:
RT3515: Use 3DES in pkcs12 if built with no-rc2
RT1766: s_client -reconnect and -starttls broke
RT2932: Catch write errors
RT2604: port should be 'unsigned short'
RT2983: total_bytes undeclared #ifdef RENEG
RT1523: Add -nocert to fix output in x509 app
RT3508: Remove unused variable introduced by b09eb24
RT3511: doc fix; req default serial is random
RT1325,2973: Add more extensions to c_rehash
RT2119,3407: Updated to dgst.pod
RT2379: Additional typo fix
RT2693: Extra include of string.h
RT2880: HFS is case-insensitive filenames
RT3246: req command prints version number wrong
Other changes; incompatibilities marked with *:
Add SCSV support
Add -misalign to speed command
Make dhparam, dsaparam, ecparam, x509 output C in proper style
Make some internal ocsp.c functions void
Only display cert usages with -help in verify
Use global bio_err, remove "BIO*err" parameter from functions
For filenames, - always means stdin (or stdout as appropriate)
Add aliases for -des/aes "wrap" ciphers.
*Remove support for IISSGC (server gated crypto)
*The undocumented OCSP -header flag is now "-header name=value"
*Documented the OCSP -header flag
Reviewed-by: Matt Caswell <matt@openssl.org>
Rename OPENSSL_SYSNAME_xxx to OPENSSL_SYS_xxx
Remove MS_STATIC; it's a relic from platforms <32 bits.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reduces number of silly casts in OpenSSL code and likely most
applications. Consistent with (char *) for "peername" value from
X509_check_host() and X509_VERIFY_PARAM_get0_peername().
OPENSSL_NO_SSL_INTERN all ssl related structures are opaque
and internals cannot be directly accessed. Many applications
will need some modification to support this and most likely some
additional functions added to OpenSSL.
The advantage of this option is that any application supporting
it will still be binary compatible if SSL structures change.
deprecate the original (numeric-only) scheme, and replace with the
CRYPTO_THREADID object. This hides the platform-specifics and should reduce
the possibility for programming errors (where failing to explicitly check
both thread ID forms could create subtle, platform-specific bugs).
Thanks to Bodo, for invaluable review and feedback.
to 'unsigned long' (ie. odd platforms/compilers), so a pointer-typed
version was added but it required portable code to check *both* modes to
determine equality. This commit maintains the availability of both thread
ID types, but deprecates the type-specific accessor APIs that invoke the
callbacks - instead a single type-independent API is used. This simplifies
software that calls into this interface, and should also make it less
error-prone - as forgetting to call and compare *both* thread ID accessors
could have led to hard-to-debug/infrequent bugs (that might only affect
certain platforms or thread implementations). As the CHANGES note says,
there were corresponding deprecations and replacements in the
thread-related functions for BN_BLINDING and ERR too.
This tidies up verify parameters and adds support for integrated policy
checking.
Add support for policy related command line options. Currently only in smime
application.
WARNING: experimental code subject to change.
to 'openssl req' and 'openssl ca'.
PR: 779
Submitted by: Michael Bell <michael.bell@cms.hu-berlin.de>
Reviewed by: Richard Levitte
(there will be some follow-up changes)
platforms that don't (necessarely) have it. In the case of VMS, this
means moving a couple of functions from apps/ to crypto/ and make them
general (although only used privately).
Add "init" command to control ENGINE
initialization.
Call ENGINE_finish on initialized ENGINEs on exit.
Reorder shutdown in apps.c: modules should be shut
down first.
Add test private key loader to openssl ENGINE: this
just loads a private key in PEM format.
Fix print format for dh length parameter.
CONF_modules_unload() now calls CONF_modules_finish()
automatically.
Default use of section openssl_conf moved to
CONF_modules_load()
Load config file in several openssl utilities.
Most utilities now load modules from the config file,
though in a few (such as version) this isn't done
because it couldn't be used for anything.
In the case of ca and req the config file used is
the same as the utility itself: that is the -config
command line option can be used to specify an
alternative file.
* make openssl rsa work with -engine chil
* misc changes, including debug-linux-ppro Configure target
and FORMAT_NETSCAPE-aware load_{,pub}key()
This completes the application of his changes.
New macros SSL[_CTX]_set_msg_callback_arg().
Message callback imlementation for SSL 3.0/TLS 1.0 (no SSL 2.0 yet).
New '-msg' option for 'openssl s_client' and 'openssl s_server'
that enable a message callback that displays all protocol messages.
In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert if
client_version is smaller than the protocol version in use.
Also change ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0
if the client demanded SSL 3.0 but only TLS 1.0 is enabled; then the
client will at least see that alert.
Fix SSL[_CTX]_ctrl prototype (void * instead of char * for generic
pointer).
Add/update some OpenSSL copyright notices.
algorithms present in all loaded ENGINEs. The result is that if any of
those ENGINEs successfully initialises, and the ENGINE_TABLE_FLAG_NOINIT
flag isn't set, then they will always be used (and cached as defaults) in
preference to software implementations. Ie. accidental auto-detection of
acceleration hardware :-)
This change stops all implementations being automatically registered in
"openssl" sub-commands, so that the "setup_engine()" handler in apps.c
controls which ENGINEs are registered for use. A special case has been
added that will revert to this "auto-detect" logic, ie. if the "-engine"
switch is used as;
-engine auto
See the commit log message for that for more information.
NB: X509_STORE_CTX's use of "ex_data" support was actually misimplemented
(initialisation by "memset" won't/can't/doesn't work). This fixes that but
requires that X509_STORE_CTX_init() be able to handle errors - so its
prototype has been changed to return 'int' rather than 'void'. All uses of
that function throughout the source code have been tracked down and
adjusted.
