New flags to build certificate chains. The can be used to rearrange
the chain so all an application needs to do is add all certificates
in arbitrary order and then build the chain to check and correct them.
Add verify error code when building chain.
Update docs.
New ctrl sets current certificate based on certain criteria. Currently
two options: set the first valid certificate as current and set the
next valid certificate as current. Using these an application can
iterate over all certificates in an SSL_CTX or SSL structure.
If pointer comparison for current certificate fails check
to see if a match using X509_cmp succeeds for the current
certificate: this is useful for cases where the certificate
pointer is not available.
PR#3169
This patch, which currently applies successfully against master and
1_0_2, adds the following functions:
SSL_[CTX_]select_current_cert() - set the current certificate without
disturbing the existing structure.
SSL_[CTX_]get0_chain_certs() - get the current certificate's chain.
SSL_[CTX_]clear_chain_certs() - clear the current certificate's chain.
The patch also adds these functions to, and fixes some existing errors
in, SSL_CTX_add1_chain_cert.pod.
Removed prior audit proof logic - audit proof support was implemented using the generic TLS extension API
Tests exercising the new supplemental data registration and callback api can be found in ssltest.c.
Implemented changes to s_server and s_client to exercise supplemental data callbacks via the -auth argument, as well as additional flags to exercise supplemental data being sent only during renegotiation.
client hello message. Previously this could only be retrieved on an initial
connection and it was impossible to determine the cipher IDs of any uknown
ciphersuites.
New function X509_chain_up_ref to dup and up the reference count of
a STACK_OF(X509): replace equivalent functionality in several places
by the equivalent call.
by a certificate chain. Add additional tests to handle client
certificates: checks for matching certificate type and issuer name
comparison.
Print out results of checks for each candidate chain tested in
s_server/s_client.
possible to have different stores per SSL structure or one store in
the parent SSL_CTX. Include distint stores for certificate chain
verification and chain building. New ctrl SSL_CTRL_BUILD_CERT_CHAIN
to build and store a certificate chain in CERT structure: returing
an error if the chain cannot be built: this will allow applications
to test if a chain is correctly configured.
Note: if the CERT based stores are not set then the parent SSL_CTX
store is used to retain compatibility with existing behaviour.
details in s_client.
Also add ctrl to set client certificate types. If not used sensible values
will be included based on supported signature algorithms: for example if
we don't include any DSA signing algorithms the DSA certificate type is
omitted.
Fix restriction in old code where certificate types would be truncated
if it exceeded TLS_CT_NUMBER.
the permitted signature algorithms for server and client authentication
are the same but it is now possible to set different algorithms for client
authentication only.
is required by client or server. An application can decide which
certificate chain to present based on arbitrary criteria: for example
supported signature algorithms. Add very simple example to s_server.
This fixes many of the problems and restrictions of the existing client
certificate callback: for example you can now clear existing certificates
and specify the whole chain.
the certificate can be used for (if anything). Set valid_flags field
in new tls1_check_chain function. Simplify ssl_set_cert_masks which used
to have similar checks in it.
Add new "cert_flags" field to CERT structure and include a "strict mode".
This enforces some TLS certificate requirements (such as only permitting
certificate signature algorithms contained in the supported algorithms
extension) which some implementations ignore: this option should be used
with caution as it could cause interoperability issues.
Only store encoded versions of peer and configured signature algorithms.
Determine shared signature algorithms and cache the result along with NID
equivalents of each algorithm.
TLS v1.2. These are sent as an extension for clients and during a certificate
request for servers.
TODO: add support for shared signature algorithms, respect shared algorithms
when deciding which ciphersuites and certificates to permit.
enabled instead of requiring an application to hard code a (possibly
inappropriate) parameter set and delve into EC internals we just
automatically use the preferred curve.
structure.
Before this the only way to add a custom chain was in the parent SSL_CTX
(which is shared by all key types and SSL structures) or rely on auto
chain building (which is performed on each handshake) from the trust store.
certificate chain instead of an X509 structure.
This makes it easier to enhance code in future and the chain
output functions have access to the CERT_PKEY structure being
used.
New function ssl_add_cert_chain which adds a certificate chain to
SSL internal BUF_MEM. Use this function in ssl3_output_cert_chain
and dtls1_output_cert_chain instead of partly duplicating code.
signature algorithms extension and correct signature format for
server key exchange.
All ciphersuites should now work on the server but no client support and
no client certificate support yet.
This change resolves a number of problems and obviates multiple kludges.
A new feature is that you can now say "AES256" or "AES128" (not just
"AES", which enables both).
In some cases the ciphersuite list generated from a given string is
affected by this change. I hope this is just in those cases where the
previous behaviour did not make sense.
This tidies up verify parameters and adds support for integrated policy
checking.
Add support for policy related command line options. Currently only in smime
application.
WARNING: experimental code subject to change.
I have tried to convert 'len' type variable declarations to unsigned as a
means to address these warnings when appropriate, but when in doubt I have
used casts in the comparisons instead. The better solution (that would get
us all lynched by API users) would be to go through and convert all the
function prototypes and structure definitions to use unsigned variables
except when signed is necessary. The proliferation of (signed) "int" for
strictly non-negative uses is unfortunate.
See the commit log message for that for more information.
NB: X509_STORE_CTX's use of "ex_data" support was actually misimplemented
(initialisation by "memset" won't/can't/doesn't work). This fixes that but
requires that X509_STORE_CTX_init() be able to handle errors - so its
prototype has been changed to return 'int' rather than 'void'. All uses of
that function throughout the source code have been tracked down and
adjusted.
and make all files the depend on it include it without prefixing it
with openssl/.
This means that all Makefiles will have $(TOP) as one of the include
directories.
like Malloc, Realloc and especially Free conflict with already existing names
on some operating systems or other packages. That is reason enough to change
the names of the OpenSSL memory allocation macros to something that has a
better chance of being unique, like prepending them with OPENSSL_.
This change includes all the name changes needed throughout all C files.
yet tighter, and also put some heat on the rest of the library by
insisting (correctly) that compare callbacks used in stacks are prototyped
with "const" parameters. This has led to a depth-first explosion of
compiler warnings in the code where 1 constification has led to 3 or 4
more. Fortunately these have all been resolved to completion and the code
seems cleaner as a result - in particular many of the _cmp() functions
should have been prototyped with "const"s, and now are. There was one
little problem however;
X509_cmp() should by rights compare "const X509 *" pointers, and it is now
declared as such. However, it's internal workings can involve
recalculating hash values and extensions if they have not already been
setup. Someone with a more intricate understanding of the flow control of
X509 might be able to tighten this up, but for now - this seemed the
obvious place to stop the "depth-first" constification of the code by
using an evil cast (they have migrated all the way here from safestack.h).
Fortunately, this is the only place in the code where this was required
to complete these type-safety changes, and it's reasonably clear and
commented, and seemed the least unacceptable of the options. Trying to
take the constification further ends up exploding out considerably, and
indeed leads directly into generalised ASN functions which are not likely
to cooperate well with this.
in SSL_new.
If SSL_OP_SINGLE_DH_USE is set, don't waste time in SSL_[CTX_]set_tmp_dh
on computing a DH key that will be ignored anyway.
ssltest -dhe1024dsa (w/ 160-bit sub-prime) had an unfair performance
advantage over -dhe1024 (safe prime): SSL_OP_SINGLE_DH_USE was
effectively always enabled because SSL_new ignored the DH key set in
the SSL_CTX. Now -dhe1024 takes the server only about twice as long
as -dhe1024dsa instead of three times as long (for 1024 bit RSA
with 1024 bit DH).
This will soon be complemented with MacOS specific source code files and
INSTALL.MacOS.
I (Andy) have decided to get rid of a number of #include <sys/types.h>.
I've verified it's ok (both by examining /usr/include/*.h and compiling)
on a number of Unix platforms. Unfortunately I don't have Windows box
to verify this on. I really appreciate if somebody could try to compile
it and contact me a.s.a.p. in case a problem occurs.
Submitted by: Roy Wood <roy@centricsystems.ca>
Reviewed by: Andy Polyakov <appro@fy.chalmers.se>
thread-safe (where thread-safe counterparts are not available on all
platforms), and don't memcpy to NULL-pointers
Submitted by: Anonymous
Reviewed by: Bodo Moeller
Also, clean up htons vs. ntohs confusions.
While modifying the sources, I found some inconsistencies on the use of
s->cert vs. s->session->sess_cert; I don't know if those could
really have caused problems, but possibly this is a proper bug-fix
and not just a clean-up.
Win32 version of rename() ). There isn't a precise rename() equivalent under
Win95: the standard rename() complains if the destination already exists so
replaced with a combination of unlink() and MoveFile().
