Commit aea145e removed some error codes that are generated
algorithmically: mapping alerts to error texts. Found by
Andreas Karlsson. This restores them, and adds two missing ones.
Reviewed-by: Matt Caswell <matt@openssl.org>
Function-like macros are replaced with prototypes and a note
that they are implemented as macros. Constants are just
referenced in-line in the text.
Tweak BIO_TYPE_... documentation.
Also fix RT4592.
Reviewed-by: Matt Caswell <matt@openssl.org>
If application uses any of Windows-specific interfaces, make it
application developer's respondibility to include <windows.h>.
Rationale is that <windows.h> is quite "toxic" and is sensitive
to inclusion order (most notably in relation to <winsock2.h>).
It's only natural to give complete control to the application developer.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The previous commit fixed a problem where fragmented alerts would cause an
infinite loop. This commit adds a test for these fragmented alerts.
Reviewed-by: Andy Polyakov <appro@openssl.org>
with "make install -j8" it happens very often that two or more make
instances are creating the same directory in parallel. As a result one
instace creates the directory and second mkdir fails because the
directory exists already (but it did not while testing for it earlier).
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1204)
Add missing entries to NAME section
Add SYNOPSIS lines, remove old NAME entries
Update find-doc-nits; better regexp's for parsing SYNOPSIS sections.
Rename a couple of files to have an API name.
Remove RSA_private_decrypt; it was duplicate content
Update for recent doc additions
Reviewed-by: Matt Caswell <matt@openssl.org>
Before the addition of this function, it was impossible to read the
symmetric key from an EVP_PKEY_HMAC type EVP_PKEY.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1217)
On some platforms we can't startup the TLSProxy due to environmental
problems (e.g. network set up on the build machine). These aren't OpenSSL
problems so we shouldn't treat them as test failures. Just visibly
indicate that we are skipping the test.
We only skip the first time we attempt to start up the proxy. If that works
then everything else should do...if not we should probably investigate and
so report as a failure.
This also removes test_networking...there is a danger that this turns into
a test of user's environmental set up rather than OpenSSL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make d2i_X509 a generic d2i/i2d manpage.
Pull common stuff out of other d2i/i2d docs.
Update find-doc-nits to know about "generic" manpages.
Cleanup some overlap.
Fix up a bunch of other references.
Reviewed-by: Matt Caswell <matt@openssl.org>
The asdf.pod filename must have asdf in its NAME section.
also check for names existing as a different filename (via Levitte)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Also tweaks to find-doc-nits, including name/synopsis checking.
Ironically, it also reports on duplicated doc names :)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove some unused files.
Rename doc-nit-check to be consistent.
Add check for multiple #include in synopsis.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add copyright to missing assembler files.
Add copyrights to missing test/* files.
Add copyrights
Various source and misc files.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Trying to use normal perl conditions to conditionally 'use' a perl
module didn't quite work. Using the 'if' module to do so does work.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1079)
As it turns out default glob's behaviour for quoted argument varies
from version to version, making it impossible to Configure or run
tests in some cases. The reason for quoting globs was to accommodate
source path with spaces in its name, which was treated by default glob
as multiple paths. File::Glob::glob on the other hand doesn't consider
spaces as delimiters and therefore works with unquoted patterns.
[Unfortunaltely File::Glob::glob, being too csh-ly, doesn't work
on VMS, hence the "pinning" is conditional.]
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix some code examples, trailing whitespace
Fix TBA sections in verify, remove others.
Remove empty sections
Use Mixed Case not ALL CAPS in head2
Enhance doc-nits script.
Remove extra =cut line
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rename sk_xxx to OPENSSL_sk_xxx and _STACK to OPENSSL_STACK
Rename lh_xxx API to OPENSSL_LH_xxx and LHASH_NODE to OPENSSL_LH_NODE
Make lhash stuff opaque.
Use typedefs for function pointers; makes the code simpler.
Remove CHECKED_xxx macros.
Add documentation; remove old X509-oriented doc.
Add API-compat names for entire old API
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Add doc-nit-check to help find future issues.
Make podchecker be almost clean.
Remove trailing whitespace.
Tab expansion
Reviewed-by: Richard Levitte <levitte@openssl.org>
- Adjust mkerr.pl to produce the line length we used for source
reformating.
- Have mkerr.pl keep track of preprocessor directive indentation
Among others, do not spuriously throw away a #endif at the end of
header files.
- Make sure mkerr.pl specifies any header inclusion correctly
Reviewed-by: Rich Salz <rsalz@openssl.org>
Workaround an apparent IO:Socket::IP bug where a seemingly valid
server socket is being returned even though a valid connection does not
exist. This causes the tests to intermittently hang. We additionally check
that the peerport looks ok to verify that the returned socket looks usable.
Reviewed-by: Richard Levitte <levitte@openssl.org>
OpenSSL 1.1.0-pre5 has made some additional structs opaque. Python's ssl
module requires access to some of the struct members. Three new getters
are added:
int X509_OBJECT_get_type(X509_OBJECT *a);
STACK_OF(X509_OBJECT) *X509_STORE_get0_objects(X509_STORE *v);
X509_VERIFY_PARAM *X509_STORE_get0_param(X509_STORE *ctx);
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add X509_STORE_{set,get}_ex_data() function and
X509_STORE_get_ex_new_index() macro.
X509_STORE has ex_data and the documentation also mentions them but they
are not actually implemented.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The no-dsa option was failing on Windows because some symbols were not
correctly flagged in libcrypto.num. Problem found due to the new symbol
consistency test.
Reviewed-by: Richard Levitte <levitte@openssl.org>
no-cmac was failing on Windows/VMS due to libcrypto.num not marking the
CMAC functions properly. Found due to the new symbol consistency test.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Link errors were occurring on Windows because the header files were not
correctly guarding some functions with OPENSSL_NO_SOCK
Reviewed-by: Rich Salz <rsalz@openssl.org>
Link errors were occurring on Windows because the header files were not
correctly guarding some functions with OPENSSL_NO_DGRAM
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add copyright to most .pl files
This does NOT cover any .pl file that has other copyright in it.
Most of those are Andy's but some are public domain.
Fix typo's in some existing files.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make OBJ_name_cmp internal
Rename idea_xxx to IDEA_xxx
Rename get_rfc_xxx to BN_get_rfc_xxx
Rename v3_addr and v3_asid functions to X509v3_...
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make X509_OBJECT, X509_STORE_CTX, X509_STORE, X509_LOOKUP,
and X509_LOOKUP_METHOD opaque.
Remove unused X509_CERT_FILE_CTX
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
There is a preference for suffixes to indicate that a function is internal
rather than prefixes. Note: the suffix is only required to disambiguate
internal functions and public symbols with the same name (but different
case)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
libssl needs to have access to some internal libcrypto symbols.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add an accessor for SSL_CTX.
Since libssl was made opaque, there is no way for users to access the
cipher_list, while users can set the cipher_list by
SSL_CTX_set_cipher_list().
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Numerous fixups based on feedback of the DSA opacity changes.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
BIO_f_linebuffer() is now built by default instead of just on VMS, but
the prototype in the header was still only available on VMS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Instead of have every DSO_METHOD_xxx in all platforms, ensure that only
one DSO_METHOD_openssl is available on all platforms.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The mk1mf build for the VC-WIN* targets is broken and the unified
scheme works well enough, so we clean out the old.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Don't have #error statements in header files, but instead wrap
the contents of that file in #ifndef OPENSSL_NO_xxx
This means it is now always safe to include the header file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
mkdef.pl was not detecting no-comp functions. This updates the header file
so that mkdef.pl detects that no-comp applies, and the functions are marked
accordingly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
In most builds, we can assume that engines live in the build tree
subdirectory "engines". This was hard coded into the tests that use
the engine ossltest.
However, that hard coding is tedious, it would need to be done in
every test recipe, and it's an incorrect assumption in some cases.
This change has us play it safe and let the build files tell the
testing framework where the engines are.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
TLSProxy starts s_server and specifies the number of client connects
it should expect. After that s_server is supposed to close down
automatically. However, if another test is then run then TLSProxy
will start a new instance of s_server. If the previous instance
hasn't closed down yet then the new instance can fail to bind to
the socket.
Reviewed-by: Richard Levitte <levitte@openssl.org>
no-ripemd was unified a while ago but the change was not done in mk1mf.pl. This commit changes the no-ripemd string to no-rmd160 which fixes the no-rmd160 classic build.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove 'log' field from SCT and related accessors
In order to still have access to an SCT's CTLOG when calling SCT_print,
SSL_CTX_get0_ctlog_store has been added.
Improved documentation for some CT functions in openssl/ssl.h.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Both of these functions can easily be implemented by callers instead.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
If there is cause to think LD_LIBRARY_PATH_32 and LD_PRELOAD_32 are
appropriate variables to touch, do so. Otherwise, touch the usual
LD_LIBRARY_PATH and LD_PRELOAD. This covers for older installations
that don't have a mix of 32-bit and 64-bit libs.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This is similar to SSL_pending() but just returns a 1 if there is data
pending in the internal OpenSSL buffers or 0 otherwise (as opposed to
SSL_pending() which returns the number of bytes available). Unlike
SSL_pending() this will work even if "read_ahead" is set (which is the
case if you are using read pipelining, or if you are doing DTLS). A 1
return value means that we have unprocessed data. It does *not* necessarily
indicate that there will be application data returned from a call to
SSL_read(). The unprocessed data may not be application data or there
could be errors when we attempt to parse the records.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
This capability is required for read pipelining. We will only read in as
many records as will fit in the read buffer (and the network can provide
in one go). The bigger the buffer the more records we can process in
parallel.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
We had the function EVP_CIPHER_CTX_cipher_data which is newly added for
1.1.0. As we now also need an EVP_CIPHER_CTX_set_cipher_data it makes
more sense for the former to be called EVP_CIPHER_CTX_get_cipher_data.
Reviewed-by: Tim Hudson <tjh@openssl.org>
This is similar to SSL_pending() but just returns a 1 if there is data
pending in the internal OpenSSL buffers or 0 otherwise (as opposed to
SSL_pending() which returns the number of bytes available). Unlike
SSL_pending() this will work even if "read_ahead" is set (which is the
case if you are using read pipelining, or if you are doing DTLS). A 1
return value means that we have unprocessed data. It does *not* necessarily
indicate that there will be application data returned from a call to
SSL_read(). The unprocessed data may not be application data or there
could be errors when we attempt to parse the records.
Reviewed-by: Tim Hudson <tjh@openssl.org>
This capability is required for read pipelining. We will only read in as
many records as will fit in the read buffer (and the network can provide
in one go). The bigger the buffer the more records we can process in
parallel.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Implement aes128-cbc as a pipeline capable cipher in the dasync engine.
As dasync is just a dummy engine, it actually just performs the parallel
encrypts/decrypts in serial.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Disabled by default, but can be enabled by setting the
ct_validation_callback on a SSL or SSL_CTX.
Reviewed-by: Ben Laurie <ben@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
This patch provides getters for default_passwd_cb and userdata for SSL
and SSL_CTX. The getter functions are required to port Python's ssl module
to OpenSSL 1.1.0.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Specifies a callback that will, in the future, be used by the SSL code to
decide whether to abort a connection on Certificate Transparency grounds.
Reviewed-by: Ben Laurie <ben@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Implementation experience has shown that the original plan for async wait
fds was too simplistic. Originally the async logic created a pipe internally
and user/engine code could then get access to it via API calls. It is more
flexible if the engine is able to create its own fd and provide it to the
async code.
Another issue is that there can be a lot of churn in the fd value within
the context of (say) a single SSL connection leading to continually adding
and removing fds from (say) epoll. It is better if we can provide some
stability of the fd value across a whole SSL connection. This is
problematic because an engine has no concept of an SSL connection.
This commit refactors things to introduce an ASYNC_WAIT_CTX which acts as a
proxy for an SSL connection down at the engine layer.
Reviewed-by: Richard Levitte <levitte@openssl.org>
VisualStudio 2015 has a bug where an internal compiler error was occurring.
By reordering the DEFINE_STACK_OF declarations for SSL_CIPHER and SSL_COMP
until after the ssl3.h include everything seems ok again.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
mkdef.pl was issuing the following error:
Use of uninitialized value within %tag in numeric eq (==) at
util/mkdef.pl line 560, <IN> line 92
This was because it was treating a __cplusplus "#ifdef" check as a "tag"
but then skipping over the corresponding "#endif". Therefore after
processing a file it still had "left over" tags from processing the
previous file. It was also getting confused by "#if" checks that didn't
match is pre-defined styles.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The SRP user database lookup method SRP_VBASE_get_by_user had confusing
memory management semantics; the returned pointer was sometimes newly
allocated, and sometimes owned by the callee. The calling code has no
way of distinguishing these two cases.
Specifically, SRP servers that configure a secret seed to hide valid
login information are vulnerable to a memory leak: an attacker
connecting with an invalid username can cause a memory leak of around
300 bytes per connection.
Servers that do not configure SRP, or configure SRP but do not configure
a seed are not vulnerable.
In Apache, the seed directive is known as SSLSRPUnknownUserSeed.
To mitigate the memory leak, the seed handling in SRP_VBASE_get_by_user
is now disabled even if the user has configured a seed.
Applications are advised to migrate to SRP_VBASE_get1_by_user. However,
note that OpenSSL makes no strong guarantees about the
indistinguishability of valid and invalid logins. In particular,
computations are currently not carried out in constant time.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Because we're requiring Perl 5.10.0 and the 'parent' didn't appear
before Perl 5.10.1, we need to resort to the older parent module
declaration style, modifying @ISA.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Until now, the engines in engines/ were only built as dynamicaly
loadable ones if shared libraries were built.
We not dissociate the two and can build dynamicaly loadable engines
even if we only build static libcrypto and libssl. This is controlled
with the option (enable|disable|no)-static-engine, defaulting to
no-static-engine.
Note that the engines in crypto/engine/ (dynamic and cryptodev) will
always be built into libcrypto.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This takes us away from the idea that we know exactly how our static
libraries are going to get used. Instead, we make them available to
build shareable things with, be it other shared libraries or DSOs.
On the other hand, we also have greater control of when the shared
library cflags. They will never be used with object files meant got
binaries, such as apps/openssl or test/test*.
With unified, we take this a bit further and prepare for having to
deal with extra cflags specifically to be used with DSOs (dynamic
engines), libraries and binaries (applications).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Adapted from BoringSSL. Added a test.
The extension parsing code is already attempting to already handle this for
some individual extensions, but it is doing so inconsistently. Duplicate
efforts in individual extension parsing will be cleaned up in a follow-up.
Reviewed-by: Stephen Henson <steve@openssl.org>
All those flags existed because we had all the dependencies versioned
in the repository, and wanted to have it be consistent, no matter what
the local configuration was. Now that the dependencies are gone from
the versioned Makefile.ins, it makes much more sense to use the exact
same flags as when compiling the object files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add -DBIO_DEBUG to --strict-warnings.
Remove comments about outdated debugging ifdef guards.
Remove md_rand ifdef guarding an assert; it doesn't seem used.
Remove the conf guards in conf_api since we use OPENSSL_assert, not assert.
For pkcs12 stuff put OPENSSL_ in front of the macro name.
Merge TLS_DEBUG into SSL_DEBUG.
Various things just turned on/off asserts, mainly for checking non-NULL
arguments, which is now removed: camellia, bn_ctx, crypto/modes.
Remove some old debug code, that basically just printed things to stderr:
DEBUG_PRINT_UNKNOWN_CIPHERSUITES, DEBUG_ZLIB, OPENSSL_RI_DEBUG,
RL_DEBUG, RSA_DEBUG, SCRYPT_DEBUG.
Remove OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
mk1mf was wondering about the options no-heartbeats and
no-crypto-mdebug-backtrace, so we add option hooks them. They only
need to become OPENSSL_NO_ macros in opensslconf.h, so nothing
additional needs to be done.
Also, add "-DOPENSSL_PIC" when shared libraries are produced.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Three header files from crypto/include/internal were used by
util/mkdef.pl. This should never be needed. Some test program used
these, which made it a valid reason at the time to make the some
internal symbols public in the shared libraries, but that's not the
case any more.
However, to be able to link libssl.so, some symbols found in
include/internal headers still need to be made public.
Reviewed-by: Andy Polyakov <appro@openssl.org>
While IO::Socket::IP is a core perl module (since Perl v5.19.8, or so
says corelist), IO::Socket::INET6 has been around longer, is said to
be more widely deployed, and most importantly, seems to have less bugs
hitting us. We therefore prefer IO::Socket::INET6, and only fall back
to IO::Socket::IP if the former doesn't exist on the local system.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
INSTALL_PREFIX is a confusing name, as there's also --prefix.
Instead, tag along with the rest of the open source world and adopt
the Makefile variable DESTDIR to designate the desired staging
directory.
The Configure option --install_prefix is removed, the only way to
designate a staging directory is with the Makefile variable (this is
also implemented for VMS' descrip.mms et al).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Once upon a time, there was chop, which somply chopped off the last
character of $_ or a given variable, and it was used to take off the
EOL character (\n) of strings.
... but then, you had to check for the presence of such character.
So came chomp, the better chop which checks for \n before chopping it
off. And this worked well, as long as Perl made internally sure that
all EOLs were converted to \n.
These days, though, there seems to be a mixture of perls, so lines
from files in the "wrong" environment might have \r\n as EOL, or just
\r (Mac OS, unless I'm misinformed).
So it's time we went for the more generic variant and use s|\R$||, the
better chomp which recognises all kinds of known EOLs and chops them
off.
A few chops were left alone, as they are use as surgical tools to
remove one last slash or one last comma.
NOTE: \R came with perl 5.10.0. It means that from now on, our
scripts will fail with any older version.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Trouble is that LINK variable assignment in make-file interferes with
LINK environment variable, which can be used to modify Microsoft's
LINK.EXE behaviour.
RT#4289
Reviewed-by: Richard Levitte <levitte@openssl.org>
With this, Cygwin and Mingw builds stand a much better chance to be
able to build outside of the source tree with the unified build.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The old building scripts get removed, they are hopelessly gone in bit
rot by now.
Also remove the old symbol hacks. They were needed needed to shorten
some names to 31 characters, and to resolve other symbol clashes.
Because we now compile with /NAMES=(AS_IS,SHORTENED), this is no
longer required.
Reviewed-by: Rich Salz <rsalz@openssl.org>
As part of this, change util/mkdef.pl to stop adding libraries to
depend on in its output. mkdef.pl should ONLY output a symbol
vector.
Because symbol names can't be longer than 31 characters, we use the
compiler to shorten those that are longer down to 23 characters plus
an 8 character CRC. To make sure users of our header files will pick
up on that automatically, add the DEC C supported extra headers files
__decc_include_prologue.h and __decc_include_epilogue.h.
Furthermore, we add a config.com, so VMS people can configure just as
comfortably as any Unix folks, thusly:
@config
Reviewed-by: Rich Salz <rsalz@openssl.org>
Under certain conditions, one might not want to output certain
sections of a template file. This adds the functions output_off() and
output_on(), reachable inside the templates. And example usage in a
Makefile template could be this:
@ : {- output_off() if $config{no_shared}; "" -}
... lines dealing with shared libraries
@ : {- output_on() -}
Reviewed-by: Rich Salz <rsalz@openssl.org>
This option disables automatic loading of the crypto/ssl error strings in
order to keep statically linked executable file size down
Reviewed-by: Richard Levitte <levitte@openssl.org>
This commit provides the basis and core code for an auto initialisation
and deinitialisation framework for libcrypto and libssl. The intention is
to remove the need (in many circumstances) to call explicit initialise and
deinitialise functions. Explicit initialisation will still be an option,
and if non-default initialisation is needed then it will be required.
Similarly for de-initialisation (although this will be a lot easier since
it will bring all de-initialisation into a single function).
Reviewed-by: Richard Levitte <levitte@openssl.org>
util/mkdef.pl and Makefile.shared needs to know about the source and
the build directories.
Additionally, Makefile.shared needs to know how to build shared
libraries in a directory other than the current one.
Reviewed-by: Ben Laurie <ben@openssl.org>
This works on Linux with Make already, and allows running only specified
tests.
Reviewed-by: Ben Laurie <ben@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The DTLSv1_listen function exposed details of the underlying BIO
abstraction and did not properly allow for IPv6. This commit changes the
"peer" argument to be a BIO_ADDR and makes it a first class function
(rather than a ctrl) to ensure proper type checking.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add no-async option to Configure that forces ASYNC_NULL.
Related to RT1979
An embedded system or replacement C library (e.g. musl or uClibc)
may not support the *context APIs that are needed for async operation.
Compiles with musl. Ran unit tests, async tests skipped as expected.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
When connecting to "localhost" the Proxy's choice of client address
family may not match the server's choice address family. Without
MultiHomed => 1, the proxy may try the wrong address family first,
and give up without trying the other.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This makes use of TLSProxy, which was expanded to use IO::Socket::IP
(which is a core perl module) or IO::Socket::INET6 (which is said to
be more popular) instead IO::Socket::INET if one of them is installed.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
CRIME protection: disable compression by default, even if OpenSSL is
compiled with zlib enabled. Applications can still enable compression by
calling SSL_CTX_clear_options(ctx, SSL_OP_NO_COMPRESSION), or by using
the SSL_CONF library to configure compression. SSL_CONF continues to
work as before:
SSL_CONF_cmd(ctx, "Options", "Compression") enables compression.
SSL_CONF_cmd(ctx, "Options", "-Compression") disables compression (now
no-op by default).
The command-line switch has changed from -no_comp to -comp.
Reviewed-by: Rich Salz <rsalz@openssl.org>
New functions to return internal pointer for order and cofactor. This
avoids the need to allocate a new BIGNUM which to copy the value to.
Simplify code to use new functions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Remove depend hacks from demos/engines.
Remove clean-depend; just call makedepend (or $CC -M) and use that.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The SSL and SSL_CTX structures are reference counted. However since libssl
was made opaque there is no way for users of the library to manipulate the
reference counts. This adds functions to enable that.
Reviewed-by: Stephen Henson <steve@openssl.org>
Now that we're using templates, we should warn people not to edit the
resulting file. We do it through util/dofile.pl, which is enhanced
with an option to tell what file it was called from. We also change
the calls so the template files are on the command line instead of
being redirected through standard input. That way, we can display
something like this (example taken from include/openssl/opensslconf.h):
/* WARNING: do not edit! */
/* Generated by Configure from include/openssl/opensslconf.h.in */
Reviewed-by: Rich Salz <rsalz@openssl.org>
It is time for Makefile.org to fold into the new regime and have a run
through util/dofile.pl. This forces some information out of there and
into Configure, which isn't a bad thing, it makes Configure
increasingly the center of build information, which is as it should
be.
A few extra defaults were needed in the BASE template to get rid of
warnings about missing values.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
This is an internal facility, never documented, not for
public consumption. Move it into ssl (where it's only used
for DTLS).
I also made the typedef's for pqueue and pitem follow our style: they
name structures, not pointers.
Reviewed-by: Richard Levitte <levitte@openssl.org>
For this adaptation, the variables $options and $version needed to
move to %config in Configure, and why not move all other variables
holding diverse version numbers at the same time?
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
For our own convenience, we need a mechanism to be able to fall back
on bundled Perl modules. It's a minimal package that's called like
this:
use with_fallback qw(Module1 Module2 ...);
For each module, it will try to require them from the system
installation, and failing that, it will temporarly add external/perl
and try to require transfer::{ModuleName}. It requires that each
bundled Perl modules is accompanied by a small transfer module
(external/perl/transfer/ModuleName.pm in our example) that knows
exactly what to load.
Reviewed-by: Rich Salz <rsalz@openssl.org>
apps/CA.pl and tools/c_rehash are built from template files. So far,
this was done by Configure, which created its own problems as it
forced everyone to reconfigure just because one of the template files
had changed.
Instead, have those files created as part of the normal build in apps/
and in tools/.
Furthermore, this prepares for a future where Configure may produce
entirely other build files than Makefile, and the latter can't be
guaranteed to be the holder of all information for other scripts.
Instead, configdata.pm (described below) becomes the center of
configuration information.
This introduces a few new things:
%config a hash table to hold all kinds of configuration data
that can be used by any other script.
configdata.pm a perl module that Configure writes. It currently
holds the hash tables %config and %target.
util/dofile.pl a script that takes a template on STDIN and outputs
the result after applying configuration data on it.
It's supposed to be called like this:
perl -I$(TOP) -Mconfigdata < template > result
or
perl -I$(TOP) -Mconfigdata templ1 templ2 ... > result
Note: util/dofile.pl requires Text::Template.
As part of this changed, remove a number of variables that are really
just copies of entries in %target, and use %target directly. The
exceptions are $target{cflags} and $target{lflags}, they do get copied
to $cflags and $lflags. The reason for this is that those variable
potentially go through a lot of changes and would rather deserve a
place in %config. That, however, is for another commit.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
--prefix is now exclusively used for software and manual installation.
--openssldir is not exclusively used as a default location for certs,
keys and the default openssl.cnf.
This change is made to bring clarity, to have the two less
intertwined, and to be more compatible with the usual ways of software
installation.
Please change your habits and scripts to use --prefix rather than
--openssldir for installation location now.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The GOST engine is now out of date and is removed by this commit. An up
to date GOST engine is now being maintained in an external repository.
See:
https://wiki.openssl.org/index.php/Binaries
Reviewed-by: Richard Levitte <levitte@openssl.org>
