The function X509_verify_cert checks the value of |ctx->chain| at the
beginning, and if it is NULL then it initialises it, along with the value
of ctx->untrusted. The normal way to use X509_verify_cert() is to first
call X509_STORE_CTX_init(); then set up various parameters etc; then call
X509_verify_cert(); then check the results; and finally call
X509_STORE_CTX_cleanup(). The initial call to X509_STORE_CTX_init() sets
|ctx->chain| to NULL. The only place in the OpenSSL codebase where
|ctx->chain| is set to anything other than a non NULL value is in
X509_verify_cert itself. Therefore the only ways that |ctx->chain| could be
non NULL on entry to X509_verify_cert is if one of the following occurs:
1) An application calls X509_verify_cert() twice without re-initialising
in between.
2) An application reaches inside the X509_STORE_CTX structure and changes
the value of |ctx->chain| directly.
With regards to the second of these, we should discount this - it should
not be supported to allow this.
With regards to the first of these, the documentation is not exactly
crystal clear, but the implication is that you must call
X509_STORE_CTX_init() before each call to X509_verify_cert(). If you fail
to do this then, at best, the results would be undefined.
Calling X509_verify_cert() with |ctx->chain| set to a non NULL value is
likely to have unexpected results, and could be dangerous. This commit
changes the behaviour of X509_verify_cert() so that it causes an error if
|ctx->chain| is anything other than NULL (because this indicates that we
have not been initialised properly). It also clarifies the associated
documentation. This is a follow up commit to CVE-2015-1793.
Reviewed-by: Stephen Henson <steve@openssl.org>
This adds a test for CVE-2015-1793. This adds a new test file
verify_extra_test.c, which could form the basis for additional
verification tests.
Reviewed-by: Stephen Henson <steve@openssl.org>
During certificate verfification, OpenSSL will attempt to find an
alternative certificate chain if the first attempt to build such a chain
fails. An error in the implementation of this logic can mean that an
attacker could cause certain checks on untrusted certificates to be
bypassed, such as the CA flag, enabling them to use a valid leaf
certificate to act as a CA and "issue" an invalid certificate.
This occurs where at least one cert is added to the first chain from the
trust store, but that chain still ends up being untrusted. In that case
ctx->last_untrusted is decremented in error.
Patch provided by the BoringSSL project.
CVE-2015-1793
Reviewed-by: Stephen Henson <steve@openssl.org>
In CCM mode don't require a tag before initialising decrypt: this allows
the tag length to be set without requiring the tag.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 9cca7be11d)
A small rearrangement so the inclusion of rsaz_exp.h would be
unconditional, but what that header defines becomes conditional.
This solves the weirdness where rsaz_exp.h gets in and out of the
dependency list for bn_exp.c, depending on the present architecture.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Construct bio_err and bio_stdout from file handles instead of FILE
pointers, since the latter might not be implemented (when OPENSSL_NO_STDIO
is defined).
Convert all output to use BIO_printf.
Change lh_foo to lh_SSL_SESSION_foo.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit bb8abd6735)
Conflicts:
crypto/threads/mttest.c
Recent HMAC changes broke ABI compatibility due to a new field in HMAC_CTX.
This backs that change out, and does it a different way.
Thanks to Timo Teras for the concept.
Conflicts:
crypto/hmac/hmac.c
Reviewed-by: Richard Levitte <levitte@openssl.org>
Also tighten X509_cmp_time to reject more than three fractional
seconds in the time; and to reject trailing garbage after the offset.
CVE-2015-1789
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix loop in do_free_upto if cmsbio is NULL: this will happen when attempting
to verify and a digest is not recognised. Reported by Johannes Bauer.
CVE-2015-1792
Reviewed-by: Matt Caswell <matt@openssl.org>
In the event of an error in the HMAC function, leaks can occur because the
HMAC_CTX does not get cleaned up.
Thanks to the BoringSSL project for reporting this issue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit e43a13c807)
The function EC_POINT_is_on_curve does not return a boolean value.
It returns 1 if the point is on the curve, 0 if it is not, and -1
on error. Many usages within OpenSSL were incorrectly using this
function and therefore not correctly handling error conditions.
With thanks to the Open Crypto Audit Project for reporting this issue.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit 68886be7e2)
This fixes a memory leak that can occur whilst duplicating a BIO chain if
the call to CRYPTO_dup_ex_data() fails. It also fixes a second memory leak
where if a failure occurs after successfully creating the first BIO in the
chain, then the beginning of the new chain was not freed.
With thanks to the Open Crypto Audit Project for reporting this issue.
Reviewed-by: Stephen Henson <steve@openssl.org>
Conflicts:
crypto/bio/bio_lib.c
BUF_MEM_free() attempts to cleanse memory using memset immediately prior
to a free. This is at risk of being optimised away by the compiler, so
replace with a call to OPENSSL_cleanse() instead.
With thanks to the Open Crypto Audit Project for reporting this issue.
Reviewed-by: Stephen Henson <steve@openssl.org>
Pointed out by Victor Vasiliev (vasilvv@mit.edu) via Adam Langley
(Google).
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 1e4a355dca)
A BIGNUM can have the value of -0. The function BN_bn2hex fails to account
for this and can allocate a buffer one byte too short in the event of -0
being used, leading to a one byte buffer overrun. All usage within the
OpenSSL library is considered safe. Any security risk is considered
negligible.
With thanks to Mateusz Kocielski (LogicalTrust), Marek Kroemeke and
Filip Palian for discovering and reporting this issue.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit c56353071d)
Conflicts:
crypto/bn/bn_print.c
Some tool chains (e.g. android) do not define IP_PMTUDISC_PROBE, and so
this build breaks.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 133dce447b)
objects.pl only looked for a space to see if the name could be
used as a C identifier. Improve the test to match the real C
rules.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 591b7aef05)
The code in bss_dgram.c checks if IP_MTUDISCOVER is defined, where it
should test for IP_MTU_DISCOVER
RT#3888
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 0baaff1a76)
The members of struct timeval on OpenVMS are unsigned. The logic for
calculating timeouts needs adjusting to deal with this.
RT#3862
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit fc52ac9028)
bn_get_bits5 was overstepping array boundary by 1 byte. It was exclusively
read overstep and data could not have been used. The only potential problem
would be if array happens to end on the very edge of last accesible page.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 69567687b0)
BLKINIT optimization worked on T4, but for some reason appears "too
aggressive" for T3 triggering intermiitent EC failures. It's not clear
why only EC is affected...
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 579734ced6)
We had updates of certain header files in both Makefile.org and the
Makefile in the directory the header file lived in. This is error
prone and also sometimes generates slightly different results (usually
just a comment that differs) depending on which way the update was
done.
This removes the file update targets from the top level Makefile, adds
an update: target in all Makefiles and has it depend on the depend: or
local_depend: targets, whichever is appropriate, so we don't get a
double run through the whole file tree.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 0f539dc1a2)
Conflicts:
Makefile.org
apps/Makefile
test/Makefile
If BN_rand is called with |bits| set to 1 and |top| set to 1 then a 1 byte
buffer overflow can occur. There are no such instances within the OpenSSL at
the moment.
Thanks to Mateusz Kocielski (LogicalTrust), Marek Kroemeke, Filip Palian for
discovering and reporting this issue.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
The functions BN_rshift and BN_lshift shift their arguments to the right or
left by a specified number of bits. Unpredicatable results (including
crashes) can occur if a negative number is supplied for the shift value.
Thanks to Mateusz Kocielski (LogicalTrust), Marek Kroemeke and Filip Palian
for discovering and reporting this issue.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit 7cc18d8158)
Conflicts:
crypto/bn/bn.h
crypto/bn/bn_err.c
40 bit ciphers are limited to 512 bit RSA, 56 bit ciphers to 1024 bit.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit ac38115c1a)
The big "don't check for NULL" cleanup requires backporting some
of the lowest-level functions to actually do nothing if NULL is
given. This will make it easier to backport fixes to release
branches, where master assumes those lower-level functions are "safe"
This commit addresses those tickets: 3798 3799 3801.
Reviewed-by: Matt Caswell <matt@openssl.org>
The function obj_cmp() (file crypto/objects/obj_dat.c) can in some
situations call memcmp() with a null pointer and a zero length.
This is invalid behaviour. When compiling openssl with undefined
behaviour sanitizer (add -fsanitize=undefined to compile flags) this
can be seen. One example that triggers this behaviour is the pkcs7
command (but there are others, e.g. I've seen it with the timestamp
function):
apps/openssl pkcs7 -in test/testp7.pem
What happens is that obj_cmp takes objects of the type ASN1_OBJECT and
passes their ->data pointer to memcmp. Zero-sized ASN1_OBJECT
structures can have a null pointer as data.
RT#3816
Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 2b8dc08b74)
Matt's note: I added a call to X509V3err to Kurt's original patch.
RT#3840
Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 344c271eb3)
Remove dependency on ssl_locl.h from v3_scts.c, and incidentally fix a build problem with
kerberos (the dependency meant v3_scts.c was trying to include krb5.h, but without having been
passed the relevanant -I flags to the compiler)
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit d13bd6130b)
Conflicts:
crypto/x509v3/v3_scts.c
The problem occurs in EVP_PKEY_sign() when using RSA with X931 padding.
It is only triggered if the RSA key size is smaller than the digest length.
So with SHA512 you can trigger the overflow with anything less than an RSA
512 bit key. I managed to trigger a 62 byte overflow when using a 16 bit RSA
key. This wasn't sufficient to cause a crash, although your mileage may
vary.
In practice RSA keys of this length are never used and X931 padding is very
rare. Even if someone did use an excessively short RSA key, the chances of
them combining that with a longer digest and X931 padding is very
small. For these reasons I do not believe there is a security implication to
this. Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3
Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 34166d4189)
Add a sanity check to the print_bin function to ensure that the |off|
argument is positive. Thanks to Kevin Wojtysiak (Int3 Solutions) and
Paramjot Oberoi (Int3 Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 3deeeeb61b)
The static function dynamically allocates an output buffer if the output
grows larger than the static buffer that is normally used. The original
logic implied that |currlen| could be greater than |maxlen| which is
incorrect (and if so would cause a buffer overrun). Also the original
logic would call OPENSSL_malloc to create a dynamic buffer equal to the
size of the static buffer, and then immediately call OPENSSL_realloc to
make it bigger, rather than just creating a buffer than was big enough in
the first place. Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot
Oberoi (Int3 Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 9d9e37744c)
There was already a sanity check to ensure the passed buffer length is not
zero. Extend this to ensure that it also not negative. Thanks to Kevin
Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3 Solutions) for
reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit b86d7dca69)
The various implementations of EVP_CTRL_AEAD_TLS_AAD expect a buffer of at
least 13 bytes long. Add sanity checks to ensure that the length is at
least that. Also add a new constant (EVP_AEAD_TLS1_AAD_LEN) to evp.h to
represent this length. Thanks to Kevin Wojtysiak (Int3 Solutions) and
Paramjot Oberoi (Int3 Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit c826988109)
Conflicts:
ssl/record/ssl3_record.c
Add a sanity check to DES_enc_write to ensure the buffer length provided
is not negative. Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot
Oberoi (Int3 Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 873fb39f20)
This reverts commit 47daa155a3.
The above commit was backported to the 1.0.2 branch as part of backporting
the alternative chain verify algorithm changes. However it has been pointed
out (credit to Shigeki Ohtsu) that this is unnecessary in 1.0.2 as this
commit is a work around for loop checking that only exists in master.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The function CRYPTO_strdup (aka OPENSSL_strdup) fails to check the return
value from CRYPTO_malloc to see if it is NULL before attempting to use it.
This patch adds a NULL check.
RT3786
Signed-off-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 37b0cf936744d9edb99b5dd82cae78a7eac6ad60)
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 20d21389c8b6f5b754573ffb6a4dc4f3986f2ca4)
This addresses
- request for improvement for faster key setup in RT#3576;
- clearing registers and stack in RT#3554 (this is more of a gesture to
see if there will be some traction from compiler side);
- more commentary around input parameters handling and stack layout
(desired when RT#3553 was reviewed);
- minor size and single block performance optimization (was lying around);
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 23f6eec71d)
Disable loop checking when we retry verification with an alternative path.
This fixes the case where an intermediate CA is explicitly trusted and part
of the untrusted certificate list. By disabling loop checking for this case
the untrusted CA can be replaced by the explicitly trusted case and
verification will succeed.
Signed-off-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit e5991ec528)
Reviewed-by: Rich Salz <rsalz@openssl.org>
valid. However the issuer of the leaf, or some intermediate cert is in fact
in the trust store.
When building a trust chain if the first attempt fails, then try to see if
alternate chains could be constructed that are trusted.
RT3637
RT3621
Reviewed-by: Rich Salz <rsalz@openssl.org>
Fix bug where i2c_ASN1_INTEGER mishandles zero if it is marked as
negative.
Thanks to Huzaifa Sidhpurwala <huzaifas@redhat.com> and
Hanno Böck <hanno@hboeck.de> for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit a0eed48d37)
It would set gen->d.dirn to a freed pointer in case X509V3_NAME_from_section
failed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 8ec5c5dd36)
While *pval is usually a pointer in rare circumstances it can be a long
value. One some platforms (e.g. WIN64) where
sizeof(long) < sizeof(ASN1_VALUE *) this will write past the field.
*pval is initialised correctly in the rest of ASN1_item_ex_new so setting it
to NULL is unecessary anyway.
Thanks to Julien Kauffmann for reporting this issue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit f617b4969a)
Conflicts:
crypto/asn1/tasn_new.c
The macros BSWAP4 and BSWAP8 have statetemnt expressions
implementations that use local variable names that shadow variables
outside the macro call, generating warnings like this
e_aes_cbc_hmac_sha1.c:263:14: warning: declaration shadows a local variable
[-Wshadow]
seqnum = BSWAP8(blocks[0].q[0]);
^
../modes/modes_lcl.h:41:29: note: expanded from macro 'BSWAP8'
^
e_aes_cbc_hmac_sha1.c:223:12: note: previous declaration is here
size_t ret = 0;
^
Have clang be quiet by modifying the macro variable names slightly
(suffixing them with an underscore).
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 2da2a4349c)
ebcdic.c:284:7: warning: ISO C requires a translation unit to contain at least one
declaration [-Wempty-translation-unit]
^
1 warning generated.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit c25dea53e9)
ARM has optimized Cortex-A5x pipeline to favour pairs of complementary
AES instructions. While modified code improves performance of post-r0p0
Cortex-A53 performance by >40% (for CBC decrypt and CTR), it hurts
original r0p0. We favour later revisions, because one can't prevent
future from coming. Improvement on post-r0p0 Cortex-A57 exceeds 50%,
while new code is not slower on r0p0, or Apple A7 for that matter.
[Update even SHA results for latest Cortex-A53.]
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 94376cccb4)
RFC5915 requires the use of the I2OSP primitive as defined in RFC3447
for storing an EC Private Key. This converts the private key into an
OCTETSTRING and retains any leading zeros. This commit ensures that those
leading zeros are present if required.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 30cd4ff294)
Conflicts:
crypto/ec/ec_asn1.c
create an HMAC
Inspired by BoringSSL commit 2fe7f2d0d9a6fcc75b4e594eeec306cc55acd594
Reviewed-by: Richard Levitte <levitte@openssl.org>
Conflicts:
crypto/hmac/hmac.c
If a set of certificates is supplied to OCSP_basic_verify use those in
addition to any present in the OCSP response as untrusted CAs when
verifying a certificate chain.
PR#3668
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 4ca5efc287)
Fix compilation failure when SCTP is compiled due to incorrect define.
Reported-by: Conrad Kostecki <ck+gentoobugzilla@bl4ckb0x.de>
URL: https://bugs.gentoo.org/543828
RT#3758
Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 7c82e339a6)
In cooperation with Ard Biesheuvel (Linaro) and Sami Tolvanen (Google).
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 2ecd32a1f8)
In PKCS#7, the ASN.1 content component is optional.
This typically applies to inner content (detached signatures),
however we must also handle unexpected missing outer content
correctly.
This patch only addresses functions reachable from parsing,
decryption and verification, and functions otherwise associated
with reading potentially untrusted data.
Correcting all low-level API calls requires further work.
CVE-2015-0289
Thanks to Michal Zalewski (Google) for reporting this issue.
Reviewed-by: Steve Henson <steve@openssl.org>
Fix segmentation violation when ASN1_TYPE_cmp is passed a boolean type. This
can be triggered during certificate verification so could be a DoS attack
against a client or a server enabling client authentication.
CVE-2015-0286
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix a bug where invalid PSS parameters are not rejected resulting in a
NULL pointer exception. This can be triggered during certificate
verification so could be a DoS attack against a client or a server
enabling client authentication.
Thanks to Brian Carpenter for reporting this issues.
CVE-2015-0208
Reviewed-by: Tim Hudson <tjh@openssl.org>
The function sk_zero is supposed to zero the elements held within a stack.
It uses memset to do this. However it calculates the size of each element
as being sizeof(char **) instead of sizeof(char *). This probably doesn't
make much practical difference in most cases, but isn't a portable
assumption.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 7132ac830f)
Previously, ASN1_UTCTIME_cmp_time_t would return 1 if s > t, -1 if
s < t, and 0 if s == t.
This behavior was broken in a refactor [0], resulting in the opposite
time comparison behavior.
[0]: 904348a492
PR#3706
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit da27006df0)
Other curves don't have this problem.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 9fbbdd73c5)
Td4 and Te4 are arrays of u8. A u8 << int promotes the u8 to an int first then shifts.
If the mathematical result of a shift (as modelled by lhs * 2^{rhs}) is not representable
in an integer, behaviour is undefined. In other words, you can't shift into the sign bit
of a signed integer. Fix this by casting to u32 whenever we're shifting left by 24.
(For consistency, cast other shifts, too.)
Caught by -fsanitize=shift
Submitted by Nick Lewycky (Google)
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 8b37e5c14f)
When printing out an ASN.1 structure if the type is an item template don't
fall thru and attempt to interpret as a primitive type.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 5dc1247a74)
The return value from ASN1_STRING_new() was not being checked which could
lead to a NULL deref in the event of a malloc failure. Also fixed a mem
leak in the error path.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 0c7ca4033d)
The return value from ASN1_STRING_new() was not being checked which could
lead to a NULL deref in the event of a malloc failure. Also fixed a mem
leak in the error path.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 6aa8dab2bb)
The call to asn1_do_adb can return NULL on error, so we should check the
return value before attempting to use it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 34a7ed0c39)
ASN1_primitive_new takes an ASN1_ITEM * param |it|. There are a couple
of conditional code paths that check whether |it| is NULL or not - but
later |it| is deref'd unconditionally. If |it| was ever really NULL then
this would seg fault. In practice ASN1_primitive_new is marked as an
internal function in the public header file. The only places it is ever
used internally always pass a non NULL parameter for |it|. Therefore, change
the code to sanity check that |it| is not NULL, and remove the conditional
checking.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 9e488fd6ab)
Calling EVP_DigestInit_ex which has already had the digest set up for it
should be possible. You are supposed to be able to pass NULL for the type.
However currently this seg faults.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit a01087027b)
In the event of an error |rr| could be NULL. Therefore don't assume you can
use |rr| in the error handling code.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 8c5a7b33c6)
BIO_debug_callback() no longer assumes the hexadecimal representation of
a pointer fits in 8 characters.
Signed-off-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 460e920d8a)
New function ASN1_STRING_clear_free which cleanses an ASN1_STRING
structure before freeing it.
Call ASN1_STRING_clear_free on PKCS#8 private key components.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit a8ae0891d4)
Miscellaneous unchecked malloc fixes. Also fixed some mem leaks on error
paths as I spotted them along the way.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 918bb86529)
Conflicts:
crypto/bio/bss_dgram.c
The format script didn't correctly recognise some ASN.1 macros and
didn't reformat some files as a result. Fix script and reformat
affected files.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 437b14b533)
When OpenSSL is configured with no-ec, then the new evp_extra_test fails to
pass. This change adds appropriate OPENSSL_NO_EC guards around the code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit a988036259)
called evp_test.c, so I have called this one evp_extra_test.c
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Conflicts:
crypto/evp/Makefile
test/Makefile
The typo doesn't affect supported configuration, only unsupported masm.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 3372c4fffa)
The rationale for this move is that TERMIOS is default, supported by
POSIX-1.2001, and most definitely on Linux. For a few other systems,
TERMIO may still be the termnial interface of preference, so we keep
-DTERMIO on those in Configure.
crypto/ui/ui_openssl.c is simplified in this regard, and will define
TERMIOS for all systems except a select few exceptions.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 64e6bf64b3)
Conflicts:
Configure
crypto/ui/ui_openssl.c
Specifically, an ASN.1 NumericString in the certificate CN will fail UTF-8 conversion
and result in a negative return value, which the "x509 -checkhost" command-line option
incorrectly interpreted as success.
Also update X509_check_host docs to reflect reality.
Thanks to Sean Burford (Google) for reporting this issue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 0923e7df9e)
