There are rare cases when an object file will only be used when
building a shared library. To enable this, we introduce
SHARED_SOURCE:
SHARED_SOURCE[libfoo]=dllmain.c
Reviewed-by: Andy Polyakov <appro@openssl.org>
Should it be needed because the recipes within a RAW section might
clash with those generated by Configure, it's possible to tell it
not to generate them with the use of OVERRIDES, for example:
SOURCE[libfoo]=foo.c bar.c
OVERRIDES=bar.o
BEGINRAW[Makefile(unix)]
bar.o: bar.c
$(CC) $(CFLAGS) -DSPECIAL -c -o $@ $<
ENDRAW[Makefile(unix)]
Reviewed-by: Rich Salz <rsalz@openssl.org>
In some cases, one might want to generate some source files from
others, that's done as follows:
GENERATE[foo.s]=asm/something.pl $(CFLAGS)
GENERATE[bar.s]=asm/bar.S
The value of each GENERATE line is a command line or part of it.
Configure places no rules on the command line, except the the first
item muct be the generator file. It is, however, entirely up to the
build file template to define exactly how those command lines should
be handled, how the output is captured and so on.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This takes us away from the idea that we know exactly how our static
libraries are going to get used. Instead, we make them available to
build shareable things with, be it other shared libraries or DSOs.
On the other hand, we also have greater control of when the shared
library cflags. They will never be used with object files meant got
binaries, such as apps/openssl or test/test*.
With unified, we take this a bit further and prepare for having to
deal with extra cflags specifically to be used with DSOs (dynamic
engines), libraries and binaries (applications).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Since we're using the acronym DSO everywhere else and that's a common
name for that kind of object, we might as well do so here as well.
Reviewed-by: Andy Polyakov <appro@openssl.org>
.d (.MMS in the VMS world) files with just dependencies are built from
exactly the same conditions as the object files. Therefore, the rules
for them can be built at the same time as the rules for the
corresponding object files.
This removes the requirement for a src2dep function in the build file
templates, and for common.tmpl to call it. In the end, the existence
of depend files is entirely up to the build file.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There was a catch 22, where 'make depend' directly after configuring
in an otherwise pristine build tree would fail because buildinf.h
didn't exist yet.
This change has the depend building targets depend on the same other
targets as the object file building targets, so the generation of
buildinf.h and similar files would kick in during 'make depend'.
Reviewed-by: Rich Salz <rsalz@openssl.org>
As part of this, change util/mkdef.pl to stop adding libraries to
depend on in its output. mkdef.pl should ONLY output a symbol
vector.
Because symbol names can't be longer than 31 characters, we use the
compiler to shorten those that are longer down to 23 characters plus
an 8 character CRC. To make sure users of our header files will pick
up on that automatically, add the DEC C supported extra headers files
__decc_include_prologue.h and __decc_include_epilogue.h.
Furthermore, we add a config.com, so VMS people can configure just as
comfortably as any Unix folks, thusly:
@config
Reviewed-by: Rich Salz <rsalz@openssl.org>
With some compilers, C macros are defined differently on the command
line than on Unix. It could be that the flad to define them isn't -D,
it could also be that they need to be grouped together and not be mixed
in with the other compiler flags (that's how it's done on VMS, for
example).
On Unix family platform configurations, we can continue to have macro
definitions mixed in with the rest of the flags, so the changes in
Configurations/*.conf are kept to an absolute minimum.
Reviewed-by: Rich Salz <rsalz@openssl.org>
common.tmpl will be used together with the template build file, and is
the engine that connects the information gathered from all the
build.info files with making the build file itself.
This file expects there to be a template section in the build file
template that defines a number perl functions designed to return
strings with appropriate lines for the build system at hand. The
exact functions, what they can expect as arguments and what output
they're expected to produce is documented in Configurations/README.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Some time ago, we had a ex_libs configuration setting that could be
divided into lflags and ex_libs. These got divided in two settings,
lflags and ex_libs, and the former was interpreted to be general
linking flags.
Unfortunately, that conclusion wasn't entirely accurate. Most of
those linking were meant to end up in a very precise position on the
linking command line, just before the spec of libraries the linking
depends on.
Back to the drawing board, we're diving things further, now having
lflags, which are linking flags that aren't depending on command line
position, plib_lflags, which are linking flags that should show up just
before the spec of libraries to depend on, and finally ex_libs, which
is the spec of extra libraries to depend on.
Also, documentation is changed in Configurations/README. This was
previously forgotten.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
The "unified" build scheme revolves around small information files,
build.info, which each describe their own bit of everything that needs
to be built, using a mini-language described in Configurations/README.
The information in build.info file contain references to source files
and final result. Object files are not mentioned at all, they are
simply from source files. Because of this, all the *_obj items in
Configurations/*.conf are renamed to *_asm_src and the files listed
in the values are change from object files to their corresponding
source files. For the sake of the other build schemes, Configure
generates corresponding *_obj entries in %target.
Furthermore, the "unified" build scheme supports having a build
directory tree separate from the source directry tree.
All paths in a build.info file is assumed to be relative to its
location, either within the source tree or within the build tree.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Many options for supporting optimizations for legacy crypto on legacy
platforms have been removed. This simplifies the source code and
does not really penalize anyone.
DES_PTR (always on)
DES_RISC1, DES_RISC2 (always off)
DES_INT (always 'unsigned int')
DES_UNROLL (always on)
BF_PTR (always on) BF_PTR2 (removed)
MD2_CHAR, MD2_LONG (always 'unsigned char')
IDEA_SHORT, IDEA_LONG (always 'unsigned int')
RC2_SHORT, RC2_LONG (always 'unsigned int')
RC4_LONG (only int and char (for assembler) are supported)
RC4_CHUNK (always long), RC_CHUNK_LL (removed)
RC4_INDEX (always on)
And also make D_ENCRYPT macro more clear (@appro)
This is done in consultation with Andy.
Reviewed-by: Andy Polyakov <appro@openssl.org>
- Small rearrangement of the TABLE and HASH printouts, and adding
printout of the "build_scheme" item
- Renamed "engines_obj" to "padlock_obj"
- Moved the runs of dofile down... it didn't quite make sense to have
that in the middle of a printout
Reviewed-by: Rich Salz <rsalz@openssl.org>
Time to get rid of @MK1MF_Builds and introduce a more flexible
'build_scheme' configuration key. Its value may be a string or an
array of strings, meaning we need to teach resolve_config how to
handle ARRAY referenses.
The build scheme is a word that selects a function to create the
appropriate result files for a certain configuration. Currently valid
build schemes aer "mk1mf" and "unixmake", the plan is however to add
at least one other for a more universal build scheme.
Incidently, this also adds the functions 'add' and 'add_before', which
can be used in a configuration, so instead of having to repeatedly
write a sub like this:
key1 => sub { join(" ", @_, "myvalues"); },
key2 => sub { join(" ", "myvalues", @_); },
one could write this:
key1 => add(" ", "myvalues"),
key2 => add_before(" ", "myvalues"),
The good point with 'add' and 'add_before' is that they handle
inheritances where the values are a misture of scalars and ARRAYs. If
there are any ARRAY to be found, the resulting value will be an ARRAY,
otherwise it will be a scalar with all the incoming valued joined
together with the separator given as first argument to add/add_before.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Move the documentation of the target configuration form to
Configurations/README.
Move initial assembler object templates to
Configurations/00-BASE-templates.conf.
Furthermore, remove all variables containing the names of the
non-assembler object files and make a BASE template of them instead.
The values from this templates are used as defaults as is. The
remaining manipulation of data when assembler modules are used is done
only when $no_asm is false.
While doing this, clean out some other related variables that aren't
used anywhere.
Also, we had to move the resolution of the chosen target a bit, or the
function 'asm' would never catch a true $no_asm... this hasn't
mattered before we've moved it all to the BASE template, but now it
does.
At the same time, add the default for the 'unistd' key to the BASE
template.
Reviewed-by: Rich Salz <rsalz@openssl.org>
