the uninitialized session_id now.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2608)
There are a small number of functions in libssl that are internal only
and never used by anything.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2770)
This adds partial support for TLS 1.3 certificate request message.
The request context and extensions are currently ignored on receive
and set to zero length on send.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2728)
The certificate types used to be held in a fixed length array or (if
it was too long) a malloced buffer. This was done to retain binary
compatibility. The code can be simplified now SSL is opaque by always
using a malloced buffer.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2733)
Provide a callback interface that gives the application the ability
to adjust the nascent SSL object at the earliest stage of ClientHello
processing, immediately after extensions have been collected but
before they have been processed.
This is akin to BoringSSL's "select_certificate_cb" (though it is not
API compatible), and as the name indicates, one major use is to examine
the supplied server name indication and select what certificate to
present to the client. However, it can also be used to make more
sweeping configuration changes to the SSL object according to the
selected server identity and configuration. That may include adjusting
the permitted TLS versions, swapping out the SSL_CTX object (as is
traditionally done in a tlsext_servername_callback), changing the
server's cipher list, and more.
We also wish to allow an early callback to indicate that it needs to perform
additional work asynchronously and resume processing later. To that effect,
refactor the second half of tls_process_client_hello() into a subroutine to be
called at the post-processing stage (including the early callback itself), to
allow the callback to result in remaining in the same work stage for a later
call to succeed. This requires allocating for and storing the CLIENTHELLO_MSG
in the SSL object to be preserved across such calls, but the storage is
reclaimed after ClientHello processing finishes.
Information about the CliehtHello is available to the callback by means of
accessor functions that can only be used from the early callback. This allows
extensions to make use of the existing internal parsing machinery without
exposing structure internals (e.g., of PACKET), so that applications do not
have to write fragile parsing code.
Applications are encouraged to utilize an early callback and not use
a servername_callback, in order to avoid unexpected behavior that
occurs due to the relative order of processing between things like
session resumption and the historical servername callback.
Also tidy up nearby style by removing unnecessary braces around one-line
conditional bodies.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Add the new enum value and case statements as appropriate.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Split off the portions that mutate the SSL object into a separate
function that the state machine calls, so that the public API can
be a pure function. (It still needs the SSL parameter in order
to determine what SSL_METHOD's get_cipher_by_char() routine to use,
though.)
Instead of returning the stack of ciphers (functionality that was
not used internally), require using the output parameter, and add
a separate output parameter for the SCSVs contained in the supplied
octets, if desired. This lets us move to the standard return value
convention. Also make both output stacks optional parameters.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Move ssl_bytes_to_cipher_list() to ssl_lib.c and create a public
wrapper around it. This lets application early callbacks easily get
SSL_CIPHER objects from the raw ciphers bytes without having to
reimplement the parsing code. In particular, they do not need to
know the details of the sslv2 format ClientHello's ciphersuite
specifications.
Document the new public function, including the arguably buggy behavior
of modifying the supplied SSL object. On the face of it, such a function
should be able to be pure, just a direct translation of wire octets to
internal data structures.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Now that we have made SCSVs into more of a first-class object, provide
a way for the bytes-to-SSL_CIPHER conversion to actually return them.
Add a flag 'all' to ssl_get_cipher_by_char to indicate that we want
all the known ciphers, not just the ones valid for encryption. This will,
in practice, let the caller retrieve the SCSVs.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Just as we have a table of ssl3_ciphers, add a table of ssl3_scsvs, to contain
SSL_CIPHER objects for these non-valid ciphers. This will allow for unified
handling of such indicators, especially as we are preparing to pass them around
between functions.
Since the 'valid' field is not set for the SCSVs, they should not be used
for anything requiring a cryptographic cipher (as opposed to something
being stuck in a cipher-shaped hole in the TLS wire protocol).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
We'll be adding a field of this type to struct ssl_st in a subsequent
commit, and need the type definition to be in scope already.
Also move up the RAW_EXTENSION definition that it depends on.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Keep track of the length of the pre_proc_exts array.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Modify the API of tls_collect_extensions() to be able to output the number of
extensions that are known (i.e., the length of its 'res' output). This number
can never be zero on a successful return due to the builtin extensions list,
but use a separate output variable so as to not overload the return value
semantics.
Having this value easily available will give consumers a way to avoid repeating
the calculation.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2607)
Set default validity flags if signature algorithms extension
is not present. Preserve flags when checking chains.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2679)
This implementation is written in endian agnostic C code. No attempt
at providing machine specific assembly code has been made. This
implementation expands the evptests by including the test cases from
RFC 5794 and ARIA official site rather than providing an individual
test case. Support for ARIA has been integrated into the command line
applications, but not TLS. Implemented modes are CBC, CFB1, CFB8,
CFB128, CTR, ECB and OFB128.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2337)
We use an int instead. That means SSL_key_update() also should use an int.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2609)
Too many KeyUpdate message could be inicative of a problem (e.g. an
infinite KeyUpdate loop if the peer always responds to a KeyUpdate message
with an "update_requested" KeyUpdate response), or (conceivably) an attack.
Either way we limit the number of KeyUpdate messages we are prepared to
handle.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2609)
For client auth call tls_choose_sigalg to select the certificate
and signature algorithm. Use the selected algorithm in
tls_construct_cert_verify.
Remove obsolete tls12_get_sigandhash.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2643)
Select appropriate signature algorithm and certificate for client
authentication using tls_choose_sigalg.
A lot of selection logic is very similar except not finding a
certificate is not a fatal error: we just do not present a
certificate.
For TLS 1.2 and earlier we only check the current certificate
is suitable (for compatibility with previous logic) for TLS 1.3
(where there are no compatibility issues) we support multiple
client certificates for different algorithms.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2643)
Following on from CVE-2017-3733, this removes the OPENSSL_assert() check
that failed and replaces it with a soft assert, and an explicit check of
value with an error return if it fails.
Reviewed-by: Richard Levitte <levitte@openssl.org>
In 1.1.0 changing the ciphersuite during a renegotiation can result in
a crash leading to a DoS attack. In master this does not occur with TLS
(instead you get an internal error, which is still wrong but not a security
issue) - but the problem still exists in the DTLS code.
The problem is caused by changing the flag indicating whether to use ETM
or not immediately on negotiation of ETM, rather than at CCS. Therefore,
during a renegotiation, if the ETM state is changing (usually due to a
change of ciphersuite), then an error/crash will occur.
Due to the fact that there are separate CCS messages for read and write
we actually now need two flags to determine whether to use ETM or not.
CVE-2017-3733
Reviewed-by: Richard Levitte <levitte@openssl.org>
