INSTALLATION ON THE WIN32 PLATFORM ---------------------------------- [Instructions for building for Windows CE can be found in INSTALL.WCE] [Instructions for building for Win64 can be found in INSTALL.W64] Heres a few comments about building OpenSSL in Windows environments. Most of this is tested on Win32 but it may also work in Win 3.1 with some modification. You need Perl for Win32. Unless you will build on Cygwin, you will need ActiveState Perl, available from http://www.activestate.com/ActivePerl. and one of the following C compilers: * Visual C++ * Borland C * GNU C (Cygwin or MinGW) If you are compiling from a tarball or a Git snapshot then the Win32 files may well be not up to date. This may mean that some "tweaking" is required to get it all to work. See the trouble shooting section later on for if (when?) it goes wrong. Visual C++ ---------- If you want to compile in the assembly language routines with Visual C++ then you will need an assembler. This is worth doing because it will result in faster code: for example it will typically result in a 2 times speedup in the RSA routines. Currently the following assemblers are supported: * Microsoft MASM (aka "ml") * Free Netwide Assembler NASM. MASM is distributed with most versions of VC++. For the versions where it is not included in VC++, it is also distributed with some Microsoft DDKs, for example the Windows NT 4.0 DDK and the Windows 98 DDK. If you do not have either of these DDKs then you can just download the binaries for the Windows 98 DDK and extract and rename the two files XXXXXml.exe and XXXXXml.err, to ml.exe and ml.err and install somewhere on your PATH. Both DDKs can be downloaded from the Microsoft developers site www.msdn.com. NASM is freely available. Version 0.98 was used during testing: other versions may also work. It is available from many places, see for example: http://www.kernel.org/pub/software/devel/nasm/binaries/win32/ The NASM binary nasmw.exe needs to be installed anywhere on your PATH. Firstly you should run Configure: > perl Configure VC-WIN32 --prefix=c:/some/openssl/dir Where the prefix argument specifies where OpenSSL will be installed to. Next you need to build the Makefiles and optionally the assembly language files: - If you are using MASM then run: > ms\do_masm - If you are using NASM then run: > ms\do_nasm - If you don't want to use the assembly language files at all then run: > ms\do_ms If you get errors about things not having numbers assigned then check the troubleshooting section: you probably won't be able to compile it as it stands. Then from the VC++ environment at a prompt do: > nmake -f ms\ntdll.mak If all is well it should compile and you will have some DLLs and executables in out32dll. If you want to try the tests then do: > nmake -f ms\ntdll.mak test To install OpenSSL to the specified location do: > nmake -f ms\ntdll.mak install Tweaks: There are various changes you can make to the Win32 compile environment. By default the library is not compiled with debugging symbols. If you add 'debug' to the mk1mf.pl lines in the do_* batch file then debugging symbols will be compiled in. Note that mk1mf.pl expects the platform to be the last argument on the command line, so 'debug' must appear before that, as all other options. By default in 0.9.8 OpenSSL will compile builtin ENGINES into the libeay32.dll shared library. If you specify the "no-static-engine" option on the command line to Configure the shared library build (ms\ntdll.mak) will compile the engines as separate DLLs. The default Win32 environment is to leave out any Windows NT specific features. If you want to enable the NT specific features of OpenSSL (currently only the logging BIO) follow the instructions above but call the batch file do_nt.bat instead of do_ms.bat. You can also build a static version of the library using the Makefile ms\nt.mak Borland C++ builder 5 --------------------- * Configure for building with Borland Builder: > perl Configure BC-32 * Create the appropriate makefile > ms\do_nasm * Build > make -f ms\bcb.mak Borland C++ builder 3 and 4 --------------------------- * Setup PATH. First must be GNU make then bcb4/bin * Run ms\bcb4.bat * Run make: > make -f bcb.mak GNU C (Cygwin) -------------- Cygwin provides a bash shell and GNU tools environment running on NT 4.0, Windows 9x, Windows ME, Windows 2000, and Windows XP. Consequently, a make of OpenSSL with Cygwin is closer to a GNU bash environment such as Linux than to other the other Win32 makes. Cygwin implements a Posix/Unix runtime system (cygwin1.dll). It is also possible to create Win32 binaries that only use the Microsoft C runtime system (msvcrt.dll or crtdll.dll) using MinGW. MinGW can be used in the Cygwin development environment or in a standalone setup as described in the following section. To build OpenSSL using Cygwin: * Install Cygwin (see http://cygwin.com/) * Install Perl and ensure it is in the path. Both Cygwin perl (5.6.1-2 or newer) and ActivePerl work. * Run the Cygwin bash shell * $ tar zxvf openssl-x.x.x.tar.gz $ cd openssl-x.x.x To build the Cygwin version of OpenSSL: $ ./config [...] $ make [...] $ make test $ make install This will create a default install in /usr/local/ssl. To build the MinGW version (native Windows) in Cygwin: $ ./Configure mingw [...] $ make [...] $ make test $ make install Cygwin Notes: "make test" and normal file operations may fail in directories mounted as text (i.e. mount -t c:\somewhere /home) due to Cygwin stripping of carriage returns. To avoid this ensure that a binary mount is used, e.g. mount -b c:\somewhere /home. "bc" is not provided in older Cygwin distribution. This causes a non-fatal error in "make test" but is otherwise harmless. If desired and needed, GNU bc can be built with Cygwin without change. GNU C (MinGW) ------------- * Compiler installation: MinGW is available from http://www.mingw.org. Run the installer and set the MinGW bin directory to the PATH in "System Properties" or autoexec.bat. * Compile OpenSSL: > ms\mingw32 This will create the library and binaries in out. In case any problems occur, try > ms\mingw32 no-asm instead. libcrypto.a and libssl.a are the static libraries. To use the DLLs, link with libeay32.a and libssl32.a instead. See troubleshooting if you get error messages about functions not having a number assigned. * You can now try the tests: > cd out > ..\ms\test Installation ------------ If you used the Cygwin procedure above, you have already installed and can skip this section. For all other procedures, there's currently no real installation procedure for Win32. There are, however, some suggestions: - do nothing. The include files are found in the inc32/ subdirectory, all binaries are found in out32dll/ or out32/ depending if you built dynamic or static libraries. - do as is written in INSTALL.Win32 that comes with modssl: $ md c:\openssl $ md c:\openssl\bin $ md c:\openssl\lib $ md c:\openssl\include $ md c:\openssl\include\openssl $ copy /b inc32\openssl\* c:\openssl\include\openssl $ copy /b out32dll\ssleay32.lib c:\openssl\lib $ copy /b out32dll\libeay32.lib c:\openssl\lib $ copy /b out32dll\ssleay32.dll c:\openssl\bin $ copy /b out32dll\libeay32.dll c:\openssl\bin $ copy /b out32dll\openssl.exe c:\openssl\bin Of course, you can choose another device than c:. C: is used here because that's usually the first (and often only) harddisk device. Note: in the modssl INSTALL.Win32, p: is used rather than c:. Troubleshooting --------------- Since the Win32 build is only occasionally tested it may not always compile cleanly. If you get an error about functions not having numbers assigned when you run ms\do_ms then this means the Win32 ordinal files are not up to date. You can do: > perl util\mkdef.pl crypto ssl update then ms\do_XXX should not give a warning any more. However the numbers that get assigned by this technique may not match those that eventually get assigned in the Git tree: so anything linked against this version of the library may need to be recompiled. If you get errors about unresolved symbols there are several possible causes. If this happens when the DLL is being linked and you have disabled some ciphers then it is possible the DEF file generator hasn't removed all the disabled symbols: the easiest solution is to edit the DEF files manually to delete them. The DEF files are ms\libeay32.def ms\ssleay32.def. Another cause is if you missed or ignored the errors about missing numbers mentioned above. If you get warnings in the code then the compilation will halt. The default Makefile for Win32 halts whenever any warnings occur. Since VC++ has its own ideas about warnings which don't always match up to other environments this can happen. The best fix is to edit the file with the warning in and fix it. Alternatively you can turn off the halt on warnings by editing the CFLAG line in the Makefile and deleting the /WX option. You might get compilation errors. Again you will have to fix these or report them. One final comment about compiling applications linked to the OpenSSL library. If you don't use the multithreaded DLL runtime library (/MD option) your program will almost certainly crash because malloc gets confused -- the OpenSSL DLLs are statically linked to one version, the application must not use a different one. You might be able to work around such problems by adding CRYPTO_malloc_init() to your program before any calls to the OpenSSL libraries: This tells the OpenSSL libraries to use the same malloc(), free() and realloc() as the application. However there are many standard library functions used by OpenSSL that call malloc() internally (e.g. fopen()), and OpenSSL cannot change these; so in general you cannot rely on CRYPTO_malloc_init() solving your problem, and you should consistently use the multithreaded library. Linking your application ------------------------ If you link with static OpenSSL libraries [those built with ms/nt.mak], then you're expected to additionally link your application with WSOCK32.LIB, ADVAPI32.LIB, GDI32.LIB and USER32.LIB. Those developing non-interactive service applications might feel concerned about linking with latter two, as they are justly associated with interactive desktop, which is not available to service processes. The toolkit is designed to detect in which context it's currently executed, GUI, console app or service, and act accordingly, namely whether or not to actually make GUI calls. If you link with OpenSSL .DLLs, then you're expected to include into your application code small "shim" snippet, which provides glue between OpenSSL BIO layer and your compiler run-time. Look up OPENSSL_Applink reference page for further details.