HOWTO proxy certificates 0. WARNING NONE OF THE CODE PRESENTED HERE HAVE BEEN CHECKED! They are just an example to show you how things can be done. There may be typos or type conflicts, and you will have to resolve them. 1. Introduction Proxy certificates are defined in RFC 3820. They are really usual certificates with the mandatory extension proxyCertInfo. Proxy certificates are issued by an End Entity (typically a user), either directly with the EE certificate as issuing certificate, or by extension through an already issued proxy certificate.. They are used to extend rights to some other entity (a computer process, typically, or sometimes to the user itself), so it can perform operations in the name of the owner of the EE certificate. See http://www.ietf.org/rfc/rfc3820.txt for more information. 2. How to create proxy cerificates It's quite easy to create proxy certificates, by taking advantage of the lack of checks of the 'openssl x509' application (*ahem*). But first, you need to create a configuration section that contains a definition of the proxyCertInfo extension, a little like this: [ v3_proxy ] # A proxy certificate MUST NEVER be a CA certificate. basicConstraints=CA:FALSE # Usual authority key ID authorityKeyIdentifier=keyid,issuer:always # Now, for the extension that marks this certificate as a proxy one proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:1,policy:text:AB It's also possible to give the proxy extension in a separate section: proxyCertInfo=critical,@proxy_ext [ proxy_ext ] language=id-ppl-anyLanguage pathlen=0 policy=text:BC The policy value has a specific syntax, {syntag}:{string}, where the syntag determines what will be done with the string. The recognised syntags are as follows: text indicates that the string is simply the bytes, not encoded in any kind of way: policy=text:räksmörgås Previous versions of this design had a specific tag for UTF-8 text. However, since the bytes are copied as-is anyway, there's no need for it. Instead, use the text: tag, like this: policy=text:räksmörgÃ¥s hex indicates the string is encoded in hex, with colons between each byte (every second hex digit): policy=hex:72:E4:6B:73:6D:F6:72:67:E5:73 Previous versions of this design had a tag to insert a complete DER blob. However, the only legal use for this would be to surround the bytes that would go with the hex: tag with what's needed to construct a correct OCTET STRING. Since hex: does that, the DER tag felt superfluous, and was therefore removed. file indicates that the text of the policy should really be taken from a file. The string is then really a file name. This is useful for policies that are large (more than a few of lines) XML documents, for example. The 'policy' setting can be split up in multiple lines like this: 0.policy=This is 1.polisy= a multi- 2.policy=line policy. NOTE: the proxy policy value is the part that determines the rights granted to the process using the proxy certificate. The value is completely dependent on the application reading and interpretting it! Now that you have created an extension section for your proxy certificate, you can now easily create a proxy certificate like this: openssl req -new -config openssl.cnf \ -out proxy.req -keyout proxy.key openssl x509 -req -CAcreateserial -in proxy.req -days 7 \ -out proxy.crt -CA user.crt -CAkey user.key \ -extfile openssl.cnf -extensions v3_proxy It's just as easy to create a proxy certificate using another proxy certificate as issuer (note that I'm using a different configuration section for it): openssl req -new -config openssl.cnf \ -out proxy2.req -keyout proxy2.key openssl x509 -req -CAcreateserial -in proxy2.req -days 7 \ -out proxy2.crt -CA proxy.crt -CAkey proxy.key \ -extfile openssl.cnf -extensions v3_proxy2 3. How to have your application interpret the policy? The basic way to interpret proxy policies is to prepare some default rights, then do a check of the proxy certificate against the a chain of proxy certificates, user certificate and CA certificates, and see what rights came out by the end. Sounds easy, huh? It almost is. The slightly complicated part is how to pass data between your application and the certificate validation procedure. You need the following ingredients: - a callback routing that will be called for every certificate that's validated. It will be called several times for each certificates, so you must be attentive to when it's a good time to do the proxy policy interpretation and check, as well as to fill in the defaults when the EE certificate is checked. - a structure of data that's shared between your application code and the callback. - a wrapper function that sets it all up. - an ex_data index function that creates an index into the generic ex_data store that's attached to an X509 validation context. This is some cookbook code for you to fill in: /* In this example, I will use a view of granted rights as a bit array, one bit for each possible right. */ typedef struct your_rights { unsigned char rights[total_rights / 8]; } YOUR_RIGHTS; /* The following procedure will create an index for the ex_data store in the X509 validation context the first time it's called. Subsequent calls will return the same index. */ static int get_proxy_auth_ex_data_idx(void) { static volatile int idx = -1; if (idx < 0) { CRYPTO_w_lock(CRYPTO_LOCK_X509_STORE); if (idx < 0) { idx = X509_STORE_CTX_get_ex_new_index(0, "for verify callback", NULL,NULL,NULL); } CRYPTO_w_unlock(CRYPTO_LOCK_X509_STORE); } return idx; } /* Callback to be given to the X509 validation procedure. */ static int verify_callback(int ok, X509_STORE_CTX *ctx) { if (ok == 1) /* It's REALLY important you keep the proxy policy check within this secion. It's important to know that when ok is 1, the certificates are checked from top to bottom. You get the CA root first, followed by the possible chain of intermediate CAs, followed by the EE certificate, followed by the possible proxy certificates. */ { X509 *xs = ctx->current_cert; if (xs->ex_flags & EXFLAG_PROXY) { YOUR_RIGHTS *rights = (YOUR_RIGHTS *)X509_STORE_CTX_get_ex_data(ctx, get_proxy_auth_ex_data_idx()); PROXY_CERT_INFO_EXTENSION *pci = X509_get_ext_d2i(xs, NID_proxyCertInfo, NULL, NULL); switch (OBJ_obj2nid(pci->proxyPolicy->policyLanguage)) { case NID_Independent: /* Do whatever you need to grant explicit rights to this particular proxy certificate, usually by pulling them from some database. If there are none to be found, clear all rights (making this and any subsequent proxy certificate void of any rights). */ memset(rights->rights, 0, sizeof(rights->rights)); break; case NID_id_ppl_inheritAll: /* This is basically a NOP, we simply let the current rights stand as they are. */ break; default: /* This is usually the most complex section of code. You really do whatever you want as long as you follow RFC 3820. In the example we use here, the simplest thing to do is to build another, temporary bit array and fill it with the rights granted by the current proxy certificate, then use it as a mask on the accumulated rights bit array, and voilà, you now have a new accumulated rights bit array. */ { int i; YOUR_RIGHTS tmp_rights; memset(tmp_rights.rights, 0, sizeof(tmp_rights.rights)); /* process_rights() is supposed to be a procedure that takes a string and it's length, interprets it and sets the bits in the YOUR_RIGHTS pointed at by the third argument. */ process_rights((char *) pci->proxyPolicy->policy->data, pci->proxyPolicy->policy->length, &tmp_rights); for(i = 0; i < total_rights / 8; i++) rights->rights[i] &= tmp_rights.rights[i]; } break; } PROXY_CERT_INFO_EXTENSION_free(pci); } else if (!(xs->ex_flags & EXFLAG_CA)) { /* We have a EE certificate, let's use it to set default! */ YOUR_RIGHTS *rights = (YOUR_RIGHTS *)X509_STORE_CTX_get_ex_data(ctx, get_proxy_auth_ex_data_idx()); /* The following procedure finds out what rights the owner of the current certificate has, and sets them in the YOUR_RIGHTS structure pointed at by the second argument. */ set_default_rights(xs, rights); } } return ok; } static int my_X509_verify_cert(X509_STORE_CTX *ctx, YOUR_RIGHTS *needed_rights) { int i; int (*save_verify_cb)(int ok,X509_STORE_CTX *ctx) = ctx->verify_cb; YOUR_RIGHTS rights; X509_STORE_CTX_set_verify_cb(ctx, verify_callback); X509_STORE_CTX_set_ex_data(ctx, get_proxy_auth_ex_data_idx(), &rights); ok = X509_verify_cert(ctx); if (ok == 1) { ok = check_needed_rights(rights, needed_rights); } X509_STORE_CTX_set_verify_cb(ctx, save_verify_cb); return ok; } If you use SSL or TLS, you can easily set up a callback to have the certificates checked properly, using the code above: SSL_CTX_set_cert_verify_callback(s_ctx, my_X509_verify_cert, &needed_rights); -- Richard Levitte