openssl/apps/s_client.c
Rich Salz ba8108154d RT2275: use BIO_sock_nbio()
Now that BIO_sock_nbio is available, use it in the apps.

Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-02-27 13:41:41 -05:00

2634 lines
86 KiB
C

/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
* All rights reserved.
*
* This package is an SSL implementation written
* by Eric Young (eay@cryptsoft.com).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson (tjh@cryptsoft.com).
*
* Copyright remains Eric Young's, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at program startup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* "This product includes cryptographic software written by
* Eric Young (eay@cryptsoft.com)"
* The word 'cryptographic' can be left out if the rouines from the library
* being used are not cryptographic related :-).
* 4. If you include any Windows specific code (or a derivative thereof) from
* the apps directory (application code) you must include an acknowledgement:
* "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/
/* ====================================================================
* Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* openssl-core@openssl.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.openssl.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com).
*
*/
/* ====================================================================
* Copyright 2005 Nokia. All rights reserved.
*
* The portions of the attached software ("Contribution") is developed by
* Nokia Corporation and is licensed pursuant to the OpenSSL open source
* license.
*
* The Contribution, originally written by Mika Kousa and Pasi Eronen of
* Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites
* support (see RFC 4279) to OpenSSL.
*
* No patent licenses or other rights except those expressly stated in
* the OpenSSL open source license shall be deemed granted or received
* expressly, by implication, estoppel, or otherwise.
*
* No assurances are provided by Nokia that the Contribution does not
* infringe the patent or other intellectual property rights of any third
* party or that the license provides you with all the necessary rights
* to make use of the Contribution.
*
* THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN
* ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA
* SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY
* OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR
* OTHERWISE.
*/
#include <ctype.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <openssl/e_os2.h>
/*
* With IPv6, it looks like Digital has mixed up the proper order of
* recursive header file inclusion, resulting in the compiler complaining
* that u_int isn't defined, but only if _POSIX_C_SOURCE is defined, which is
* needed to have fileno() declared correctly... So let's define u_int
*/
#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__U_INT)
# define __U_INT
typedef unsigned int u_int;
#endif
#define USE_SOCKETS
#include "apps.h"
#include <openssl/x509.h>
#include <openssl/ssl.h>
#include <openssl/err.h>
#include <openssl/pem.h>
#include <openssl/rand.h>
#include <openssl/ocsp.h>
#include <openssl/bn.h>
#include <openssl/async.h>
#ifndef OPENSSL_NO_SRP
# include <openssl/srp.h>
#endif
#include "s_apps.h"
#include "timeouts.h"
#if defined(__has_feature)
# if __has_feature(memory_sanitizer)
# include <sanitizer/msan_interface.h>
# endif
#endif
#undef BUFSIZZ
#define BUFSIZZ 1024*8
#define S_CLIENT_IRC_READ_TIMEOUT 8
extern int verify_depth;
extern int verify_error;
extern int verify_return_error;
extern int verify_quiet;
static char *prog;
static int async = 0;
static int c_nbio = 0;
static int c_tlsextdebug = 0;
static int c_status_req = 0;
static int c_debug = 0;
static int c_msg = 0;
static int c_showcerts = 0;
static char *keymatexportlabel = NULL;
static int keymatexportlen = 20;
static BIO *bio_c_out = NULL;
static BIO *bio_c_msg = NULL;
static int c_quiet = 0;
static int c_ign_eof = 0;
static int c_brief = 0;
static void print_stuff(BIO *berr, SSL *con, int full);
static int ocsp_resp_cb(SSL *s, void *arg);
static int saved_errno;
static void save_errno(void)
{
saved_errno = errno;
errno = 0;
}
static int restore_errno(void)
{
int ret = errno;
errno = saved_errno;
return ret;
}
static void do_ssl_shutdown(SSL *ssl)
{
int ret;
do {
/* We only do unidirectional shutdown */
ret = SSL_shutdown(ssl);
if (ret < 0) {
switch (SSL_get_error(ssl, ret)) {
case SSL_ERROR_WANT_READ:
case SSL_ERROR_WANT_WRITE:
case SSL_ERROR_WANT_ASYNC:
/* We just do busy waiting. Nothing clever */
continue;
}
ret = 0;
}
} while (ret < 0);
}
#ifndef OPENSSL_NO_PSK
/* Default PSK identity and key */
static char *psk_identity = "Client_identity";
/*
* char *psk_key=NULL; by default PSK is not used
*/
static unsigned int psk_client_cb(SSL *ssl, const char *hint, char *identity,
unsigned int max_identity_len,
unsigned char *psk,
unsigned int max_psk_len)
{
unsigned int psk_len = 0;
int ret;
BIGNUM *bn = NULL;
if (c_debug)
BIO_printf(bio_c_out, "psk_client_cb\n");
if (!hint) {
/* no ServerKeyExchange message */
if (c_debug)
BIO_printf(bio_c_out,
"NULL received PSK identity hint, continuing anyway\n");
} else if (c_debug)
BIO_printf(bio_c_out, "Received PSK identity hint '%s'\n", hint);
/*
* lookup PSK identity and PSK key based on the given identity hint here
*/
ret = BIO_snprintf(identity, max_identity_len, "%s", psk_identity);
if (ret < 0 || (unsigned int)ret > max_identity_len)
goto out_err;
if (c_debug)
BIO_printf(bio_c_out, "created identity '%s' len=%d\n", identity,
ret);
ret = BN_hex2bn(&bn, psk_key);
if (!ret) {
BIO_printf(bio_err, "Could not convert PSK key '%s' to BIGNUM\n",
psk_key);
BN_free(bn);
return 0;
}
if ((unsigned int)BN_num_bytes(bn) > max_psk_len) {
BIO_printf(bio_err,
"psk buffer of callback is too small (%d) for key (%d)\n",
max_psk_len, BN_num_bytes(bn));
BN_free(bn);
return 0;
}
psk_len = BN_bn2bin(bn, psk);
BN_free(bn);
if (psk_len == 0)
goto out_err;
if (c_debug)
BIO_printf(bio_c_out, "created PSK len=%d\n", psk_len);
return psk_len;
out_err:
if (c_debug)
BIO_printf(bio_err, "Error in PSK client callback\n");
return 0;
}
#endif
/* This is a context that we pass to callbacks */
typedef struct tlsextctx_st {
BIO *biodebug;
int ack;
} tlsextctx;
static int ssl_servername_cb(SSL *s, int *ad, void *arg)
{
tlsextctx *p = (tlsextctx *) arg;
const char *hn = SSL_get_servername(s, TLSEXT_NAMETYPE_host_name);
if (SSL_get_servername_type(s) != -1)
p->ack = !SSL_session_reused(s) && hn != NULL;
else
BIO_printf(bio_err, "Can't use SSL_get_servername\n");
return SSL_TLSEXT_ERR_OK;
}
#ifndef OPENSSL_NO_SRP
/* This is a context that we pass to all callbacks */
typedef struct srp_arg_st {
char *srppassin;
char *srplogin;
int msg; /* copy from c_msg */
int debug; /* copy from c_debug */
int amp; /* allow more groups */
int strength /* minimal size for N */ ;
} SRP_ARG;
# define SRP_NUMBER_ITERATIONS_FOR_PRIME 64
static int srp_Verify_N_and_g(const BIGNUM *N, const BIGNUM *g)
{
BN_CTX *bn_ctx = BN_CTX_new();
BIGNUM *p = BN_new();
BIGNUM *r = BN_new();
int ret =
g != NULL && N != NULL && bn_ctx != NULL && BN_is_odd(N) &&
BN_is_prime_ex(N, SRP_NUMBER_ITERATIONS_FOR_PRIME, bn_ctx, NULL) &&
p != NULL && BN_rshift1(p, N) &&
/* p = (N-1)/2 */
BN_is_prime_ex(p, SRP_NUMBER_ITERATIONS_FOR_PRIME, bn_ctx, NULL) &&
r != NULL &&
/* verify g^((N-1)/2) == -1 (mod N) */
BN_mod_exp(r, g, p, N, bn_ctx) &&
BN_add_word(r, 1) && BN_cmp(r, N) == 0;
BN_free(r);
BN_free(p);
BN_CTX_free(bn_ctx);
return ret;
}
/*-
* This callback is used here for two purposes:
* - extended debugging
* - making some primality tests for unknown groups
* The callback is only called for a non default group.
*
* An application does not need the call back at all if
* only the stanard groups are used. In real life situations,
* client and server already share well known groups,
* thus there is no need to verify them.
* Furthermore, in case that a server actually proposes a group that
* is not one of those defined in RFC 5054, it is more appropriate
* to add the group to a static list and then compare since
* primality tests are rather cpu consuming.
*/
static int ssl_srp_verify_param_cb(SSL *s, void *arg)
{
SRP_ARG *srp_arg = (SRP_ARG *)arg;
BIGNUM *N = NULL, *g = NULL;
if (((N = SSL_get_srp_N(s)) == NULL) || ((g = SSL_get_srp_g(s)) == NULL))
return 0;
if (srp_arg->debug || srp_arg->msg || srp_arg->amp == 1) {
BIO_printf(bio_err, "SRP parameters:\n");
BIO_printf(bio_err, "\tN=");
BN_print(bio_err, N);
BIO_printf(bio_err, "\n\tg=");
BN_print(bio_err, g);
BIO_printf(bio_err, "\n");
}
if (SRP_check_known_gN_param(g, N))
return 1;
if (srp_arg->amp == 1) {
if (srp_arg->debug)
BIO_printf(bio_err,
"SRP param N and g are not known params, going to check deeper.\n");
/*
* The srp_moregroups is a real debugging feature. Implementors
* should rather add the value to the known ones. The minimal size
* has already been tested.
*/
if (BN_num_bits(g) <= BN_BITS && srp_Verify_N_and_g(N, g))
return 1;
}
BIO_printf(bio_err, "SRP param N and g rejected.\n");
return 0;
}
# define PWD_STRLEN 1024
static char *ssl_give_srp_client_pwd_cb(SSL *s, void *arg)
{
SRP_ARG *srp_arg = (SRP_ARG *)arg;
char *pass = app_malloc(PWD_STRLEN + 1, "SRP password buffer");
PW_CB_DATA cb_tmp;
int l;
cb_tmp.password = (char *)srp_arg->srppassin;
cb_tmp.prompt_info = "SRP user";
if ((l = password_callback(pass, PWD_STRLEN, 0, &cb_tmp)) < 0) {
BIO_printf(bio_err, "Can't read Password\n");
OPENSSL_free(pass);
return NULL;
}
*(pass + l) = '\0';
return pass;
}
#endif
static char *srtp_profiles = NULL;
#ifndef OPENSSL_NO_NEXTPROTONEG
/* This the context that we pass to next_proto_cb */
typedef struct tlsextnextprotoctx_st {
unsigned char *data;
unsigned short len;
int status;
} tlsextnextprotoctx;
static tlsextnextprotoctx next_proto;
static int next_proto_cb(SSL *s, unsigned char **out, unsigned char *outlen,
const unsigned char *in, unsigned int inlen,
void *arg)
{
tlsextnextprotoctx *ctx = arg;
if (!c_quiet) {
/* We can assume that |in| is syntactically valid. */
unsigned i;
BIO_printf(bio_c_out, "Protocols advertised by server: ");
for (i = 0; i < inlen;) {
if (i)
BIO_write(bio_c_out, ", ", 2);
BIO_write(bio_c_out, &in[i + 1], in[i]);
i += in[i] + 1;
}
BIO_write(bio_c_out, "\n", 1);
}
ctx->status =
SSL_select_next_proto(out, outlen, in, inlen, ctx->data, ctx->len);
return SSL_TLSEXT_ERR_OK;
}
#endif /* ndef OPENSSL_NO_NEXTPROTONEG */
static int serverinfo_cli_parse_cb(SSL *s, unsigned int ext_type,
const unsigned char *in, size_t inlen,
int *al, void *arg)
{
char pem_name[100];
unsigned char ext_buf[4 + 65536];
/* Reconstruct the type/len fields prior to extension data */
ext_buf[0] = ext_type >> 8;
ext_buf[1] = ext_type & 0xFF;
ext_buf[2] = inlen >> 8;
ext_buf[3] = inlen & 0xFF;
memcpy(ext_buf + 4, in, inlen);
BIO_snprintf(pem_name, sizeof(pem_name), "SERVERINFO FOR EXTENSION %d",
ext_type);
PEM_write_bio(bio_c_out, pem_name, "", ext_buf, 4 + inlen);
return 1;
}
/*
* Hex decoder that tolerates optional whitespace. Returns number of bytes
* produced, advances inptr to end of input string.
*/
static ossl_ssize_t hexdecode(const char **inptr, void *result)
{
unsigned char **out = (unsigned char **)result;
const char *in = *inptr;
unsigned char *ret = OPENSSL_malloc(strlen(in)/2);
unsigned char *cp = ret;
uint8_t byte;
int nibble = 0;
if (ret == NULL)
return -1;
for (byte = 0; *in; ++in) {
char c;
if (isspace(_UC(*in)))
continue;
c = tolower(_UC(*in));
if ('0' <= c && c <= '9') {
byte |= c - '0';
} else if ('a' <= c && c <= 'f') {
byte |= c - 'a' + 10;
} else {
OPENSSL_free(ret);
return 0;
}
if ((nibble ^= 1) == 0) {
*cp++ = byte;
byte = 0;
} else {
byte <<= 4;
}
}
if (nibble != 0) {
OPENSSL_free(ret);
return 0;
}
*inptr = in;
return cp - (*out = ret);
}
/*
* Decode unsigned 0..255, returns 1 on success, <= 0 on failure. Advances
* inptr to next field skipping leading whitespace.
*/
static ossl_ssize_t checked_uint8(const char **inptr, void *out)
{
uint8_t *result = (uint8_t *)out;
const char *in = *inptr;
char *endp;
long v;
int e;
save_errno();
v = strtol(in, &endp, 10);
e = restore_errno();
if (((v == LONG_MIN || v == LONG_MAX) && e == ERANGE) ||
endp == in || !isspace(_UC(*endp)) ||
v != (*result = (uint8_t) v)) {
return -1;
}
for (in = endp; isspace(_UC(*in)); ++in)
continue;
*inptr = in;
return 1;
}
struct tlsa_field {
void *var;
const char *name;
ossl_ssize_t (*parser)(const char **, void *);
};
static int tlsa_import_rr(SSL *con, const char *rrdata)
{
/* Not necessary to re-init these values; the "parsers" do that. */
static uint8_t usage;
static uint8_t selector;
static uint8_t mtype;
static unsigned char *data;
static struct tlsa_field tlsa_fields[] = {
{ &usage, "usage", checked_uint8 },
{ &selector, "selector", checked_uint8 },
{ &mtype, "mtype", checked_uint8 },
{ &data, "data", hexdecode },
{ NULL, }
};
struct tlsa_field *f;
int ret;
const char *cp = rrdata;
ossl_ssize_t len = 0;
for (f = tlsa_fields; f->var; ++f) {
/* Returns number of bytes produced, advances cp to next field */
if ((len = f->parser(&cp, f->var)) <= 0) {
BIO_printf(bio_err, "%s: warning: bad TLSA %s field in: %s\n",
prog, f->name, rrdata);
return 0;
}
}
/* The data field is last, so len is its length */
ret = SSL_dane_tlsa_add(con, usage, selector, mtype, data, len);
OPENSSL_free(data);
if (ret == 0) {
ERR_print_errors(bio_err);
BIO_printf(bio_err, "%s: warning: unusable TLSA rrdata: %s\n",
prog, rrdata);
return 0;
}
if (ret < 0) {
ERR_print_errors(bio_err);
BIO_printf(bio_err, "%s: warning: error loading TLSA rrdata: %s\n",
prog, rrdata);
return 0;
}
return ret;
}
static int tlsa_import_rrset(SSL *con, STACK_OF(OPENSSL_STRING) *rrset)
{
int num = sk_OPENSSL_STRING_num(rrset);
int count = 0;
int i;
for (i = 0; i < num; ++i) {
char *rrdata = sk_OPENSSL_STRING_value(rrset, i);
if (tlsa_import_rr(con, rrdata) > 0)
++count;
}
return count > 0;
}
typedef enum OPTION_choice {
OPT_ERR = -1, OPT_EOF = 0, OPT_HELP,
OPT_4, OPT_6, OPT_HOST, OPT_PORT, OPT_CONNECT, OPT_UNIX,
OPT_XMPPHOST, OPT_VERIFY,
OPT_CERT, OPT_CRL, OPT_CRL_DOWNLOAD, OPT_SESS_OUT, OPT_SESS_IN,
OPT_CERTFORM, OPT_CRLFORM, OPT_VERIFY_RET_ERROR, OPT_VERIFY_QUIET,
OPT_BRIEF, OPT_PREXIT, OPT_CRLF, OPT_QUIET, OPT_NBIO,
OPT_SSL_CLIENT_ENGINE, OPT_RAND, OPT_IGN_EOF, OPT_NO_IGN_EOF,
OPT_DEBUG, OPT_TLSEXTDEBUG, OPT_STATUS, OPT_WDEBUG,
OPT_MSG, OPT_MSGFILE, OPT_ENGINE, OPT_TRACE, OPT_SECURITY_DEBUG,
OPT_SECURITY_DEBUG_VERBOSE, OPT_SHOWCERTS, OPT_NBIO_TEST, OPT_STATE,
OPT_PSK_IDENTITY, OPT_PSK, OPT_SRPUSER, OPT_SRPPASS, OPT_SRP_STRENGTH,
OPT_SRP_LATEUSER, OPT_SRP_MOREGROUPS, OPT_SSL3, OPT_SSL_CONFIG,
OPT_TLS1_2, OPT_TLS1_1, OPT_TLS1, OPT_DTLS, OPT_DTLS1,
OPT_DTLS1_2, OPT_TIMEOUT, OPT_MTU, OPT_KEYFORM, OPT_PASS,
OPT_CERT_CHAIN, OPT_CAPATH, OPT_NOCAPATH, OPT_CHAINCAPATH, OPT_VERIFYCAPATH,
OPT_KEY, OPT_RECONNECT, OPT_BUILD_CHAIN, OPT_CAFILE, OPT_NOCAFILE,
OPT_CHAINCAFILE, OPT_VERIFYCAFILE, OPT_NEXTPROTONEG, OPT_ALPN,
OPT_SERVERINFO, OPT_STARTTLS, OPT_SERVERNAME,
OPT_USE_SRTP, OPT_KEYMATEXPORT, OPT_KEYMATEXPORTLEN, OPT_SMTPHOST,
OPT_ASYNC,
OPT_V_ENUM,
OPT_X_ENUM,
OPT_S_ENUM,
OPT_FALLBACKSCSV, OPT_NOCMDS, OPT_PROXY, OPT_DANE_TLSA_DOMAIN,
OPT_DANE_TLSA_RRDATA
} OPTION_CHOICE;
OPTIONS s_client_options[] = {
{"help", OPT_HELP, '-', "Display this summary"},
{"host", OPT_HOST, 's', "Use -connect instead"},
{"port", OPT_PORT, 'p', "Use -connect instead"},
{"connect", OPT_CONNECT, 's',
"TCP/IP where to connect (default is :" PORT ")"},
{"proxy", OPT_PROXY, 's',
"Connect to via specified proxy to the real server"},
#ifdef AF_UNIX
{"unix", OPT_UNIX, 's', "Connect over unix domain sockets"},
#endif
{"4", OPT_4, '-', "Use IPv4 only"},
{"6", OPT_6, '-', "Use IPv6 only"},
{"verify", OPT_VERIFY, 'p', "Turn on peer certificate verification"},
{"cert", OPT_CERT, '<', "Certificate file to use, PEM format assumed"},
{"certform", OPT_CERTFORM, 'F',
"Certificate format (PEM or DER) PEM default"},
{"key", OPT_KEY, '<', "Private key file to use, if not in -cert file"},
{"keyform", OPT_KEYFORM, 'F', "Key format (PEM or DER) PEM default"},
{"pass", OPT_PASS, 's', "Private key file pass phrase source"},
{"CApath", OPT_CAPATH, '/', "PEM format directory of CA's"},
{"CAfile", OPT_CAFILE, '<', "PEM format file of CA's"},
{"no-CAfile", OPT_NOCAFILE, '-',
"Do not load the default certificates file"},
{"no-CApath", OPT_NOCAPATH, '-',
"Do not load certificates from the default certificates directory"},
{"dane_tlsa_domain", OPT_DANE_TLSA_DOMAIN, 's', "DANE TLSA base domain"},
{"dane_tlsa_rrdata", OPT_DANE_TLSA_RRDATA, 's',
"DANE TLSA rrdata presentation form"},
{"reconnect", OPT_RECONNECT, '-',
"Drop and re-make the connection with the same Session-ID"},
{"showcerts", OPT_SHOWCERTS, '-', "Show all certificates in the chain"},
{"debug", OPT_DEBUG, '-', "Extra output"},
{"msg", OPT_MSG, '-', "Show protocol messages"},
{"msgfile", OPT_MSGFILE, '>',
"File to send output of -msg or -trace, instead of stdout"},
{"nbio_test", OPT_NBIO_TEST, '-', "More ssl protocol testing"},
{"state", OPT_STATE, '-', "Print the ssl states"},
{"crlf", OPT_CRLF, '-', "Convert LF from terminal into CRLF"},
{"quiet", OPT_QUIET, '-', "No s_client output"},
{"ign_eof", OPT_IGN_EOF, '-', "Ignore input eof (default when -quiet)"},
{"no_ign_eof", OPT_NO_IGN_EOF, '-', "Don't ignore input eof"},
{"starttls", OPT_STARTTLS, 's',
"Use the appropriate STARTTLS command before starting TLS"},
{"xmpphost", OPT_XMPPHOST, 's',
"Host to use with \"-starttls xmpp[-server]\""},
{"rand", OPT_RAND, 's',
"Load the file(s) into the random number generator"},
{"sess_out", OPT_SESS_OUT, '>', "File to write SSL session to"},
{"sess_in", OPT_SESS_IN, '<', "File to read SSL session from"},
{"use_srtp", OPT_USE_SRTP, 's',
"Offer SRTP key management with a colon-separated profile list"},
{"keymatexport", OPT_KEYMATEXPORT, 's',
"Export keying material using label"},
{"keymatexportlen", OPT_KEYMATEXPORTLEN, 'p',
"Export len bytes of keying material (default 20)"},
{"fallback_scsv", OPT_FALLBACKSCSV, '-', "Send the fallback SCSV"},
{"name", OPT_SMTPHOST, 's', "Hostname to use for \"-starttls smtp\""},
{"CRL", OPT_CRL, '<', "CRL file to use"},
{"crl_download", OPT_CRL_DOWNLOAD, '-', "Download CRL from distribution points"},
{"CRLform", OPT_CRLFORM, 'F', "CRL format (PEM or DER) PEM is default"},
{"verify_return_error", OPT_VERIFY_RET_ERROR, '-',
"Close connection on verification error"},
{"verify_quiet", OPT_VERIFY_QUIET, '-', "Restrict verify output to errors"},
{"brief", OPT_BRIEF, '-',
"Restrict output to brief summary of connection parameters"},
{"prexit", OPT_PREXIT, '-',
"Print session information when the program exits"},
{"security_debug", OPT_SECURITY_DEBUG, '-',
"Enable security debug messages"},
{"security_debug_verbose", OPT_SECURITY_DEBUG_VERBOSE, '-',
"Output more security debug output"},
{"cert_chain", OPT_CERT_CHAIN, '<',
"Certificate chain file (in PEM format)"},
{"chainCApath", OPT_CHAINCAPATH, '/',
"Use dir as certificate store path to build CA certificate chain"},
{"verifyCApath", OPT_VERIFYCAPATH, '/',
"Use dir as certificate store path to verify CA certificate"},
{"build_chain", OPT_BUILD_CHAIN, '-', "Build certificate chain"},
{"chainCAfile", OPT_CHAINCAFILE, '<',
"CA file for certificate chain (PEM format)"},
{"verifyCAfile", OPT_VERIFYCAFILE, '<',
"CA file for certificate verification (PEM format)"},
{"nocommands", OPT_NOCMDS, '-', "Do not use interactive command letters"},
{"servername", OPT_SERVERNAME, 's',
"Set TLS extension servername in ClientHello"},
{"tlsextdebug", OPT_TLSEXTDEBUG, '-',
"Hex dump of all TLS extensions received"},
{"status", OPT_STATUS, '-', "Request certificate status from server"},
{"serverinfo", OPT_SERVERINFO, 's',
"types Send empty ClientHello extensions (comma-separated numbers)"},
{"alpn", OPT_ALPN, 's',
"Enable ALPN extension, considering named protocols supported (comma-separated list)"},
{"async", OPT_ASYNC, '-', "Support asynchronous operation"},
{"ssl_config", OPT_SSL_CONFIG, 's', "Use specified configuration file"},
OPT_S_OPTIONS,
OPT_V_OPTIONS,
OPT_X_OPTIONS,
#ifndef OPENSSL_NO_SSL3
{"ssl3", OPT_SSL3, '-', "Just use SSLv3"},
#endif
#ifndef OPENSSL_NO_TLS1
{"tls1", OPT_TLS1, '-', "Just use TLSv1"},
#endif
#ifndef OPENSSL_NO_TLS1_1
{"tls1_1", OPT_TLS1_1, '-', "Just use TLSv1.1"},
#endif
#ifndef OPENSSL_NO_TLS1_2
{"tls1_2", OPT_TLS1_2, '-', "Just use TLSv1.2"},
#endif
#ifndef OPENSSL_NO_DTLS
{"dtls", OPT_DTLS, '-', "Use any version of DTLS"},
{"timeout", OPT_TIMEOUT, '-',
"Enable send/receive timeout on DTLS connections"},
{"mtu", OPT_MTU, 'p', "Set the link layer MTU"},
#endif
#ifndef OPENSSL_NO_DTLS1
{"dtls1", OPT_DTLS1, '-', "Just use DTLSv1"},
#endif
#ifndef OPENSSL_NO_DTLS1_2
{"dtls1_2", OPT_DTLS1_2, '-', "Just use DTLSv1.2"},
#endif
#ifndef OPENSSL_NO_SSL_TRACE
{"trace", OPT_TRACE, '-', "Show trace output of protocol messages"},
#endif
#ifdef WATT32
{"wdebug", OPT_WDEBUG, '-', "WATT-32 tcp debugging"},
#endif
{"nbio", OPT_NBIO, '-', "Use non-blocking IO"},
#ifndef OPENSSL_NO_PSK
{"psk_identity", OPT_PSK_IDENTITY, 's', "PSK identity"},
{"psk", OPT_PSK, 's', "PSK in hex (without 0x)"},
#endif
#ifndef OPENSSL_NO_SRP
{"srpuser", OPT_SRPUSER, 's', "SRP authentification for 'user'"},
{"srppass", OPT_SRPPASS, 's', "Password for 'user'"},
{"srp_lateuser", OPT_SRP_LATEUSER, '-',
"SRP username into second ClientHello message"},
{"srp_moregroups", OPT_SRP_MOREGROUPS, '-',
"Tolerate other than the known g N values."},
{"srp_strength", OPT_SRP_STRENGTH, 'p', "Minimal length in bits for N"},
#endif
#ifndef OPENSSL_NO_NEXTPROTONEG
{"nextprotoneg", OPT_NEXTPROTONEG, 's',
"Enable NPN extension, considering named protocols supported (comma-separated list)"},
#endif
#ifndef OPENSSL_NO_ENGINE
{"engine", OPT_ENGINE, 's', "Use engine, possibly a hardware device"},
{"ssl_client_engine", OPT_SSL_CLIENT_ENGINE, 's',
"Specify engine to be used for client certificate operations"},
#endif
{NULL}
};
typedef enum PROTOCOL_choice {
PROTO_OFF,
PROTO_SMTP,
PROTO_POP3,
PROTO_IMAP,
PROTO_FTP,
PROTO_TELNET,
PROTO_XMPP,
PROTO_XMPP_SERVER,
PROTO_CONNECT,
PROTO_IRC
} PROTOCOL_CHOICE;
static OPT_PAIR services[] = {
{"smtp", PROTO_SMTP},
{"pop3", PROTO_POP3},
{"imap", PROTO_IMAP},
{"ftp", PROTO_FTP},
{"xmpp", PROTO_XMPP},
{"xmpp-server", PROTO_XMPP_SERVER},
{"telnet", PROTO_TELNET},
{"irc", PROTO_IRC},
{NULL}
};
int s_client_main(int argc, char **argv)
{
BIO *sbio;
EVP_PKEY *key = NULL;
SSL *con = NULL;
SSL_CTX *ctx = NULL;
STACK_OF(X509) *chain = NULL;
X509 *cert = NULL;
X509_VERIFY_PARAM *vpm = NULL;
SSL_EXCERT *exc = NULL;
SSL_CONF_CTX *cctx = NULL;
STACK_OF(OPENSSL_STRING) *ssl_args = NULL;
char *dane_tlsa_domain = NULL;
STACK_OF(OPENSSL_STRING) *dane_tlsa_rrset = NULL;
STACK_OF(X509_CRL) *crls = NULL;
const SSL_METHOD *meth = TLS_client_method();
char *CApath = NULL, *CAfile = NULL, *cbuf = NULL, *sbuf = NULL;
char *mbuf = NULL, *proxystr = NULL, *connectstr = NULL;
char *cert_file = NULL, *key_file = NULL, *chain_file = NULL;
char *chCApath = NULL, *chCAfile = NULL, *host = NULL;
char *port = BUF_strdup(PORT);
char *inrand = NULL;
char *passarg = NULL, *pass = NULL, *vfyCApath = NULL, *vfyCAfile = NULL;
char *sess_in = NULL, *sess_out = NULL, *crl_file = NULL, *p;
char *xmpphost = NULL;
const char *ehlo = "mail.example.com";
struct sockaddr peer;
struct timeval timeout, *timeoutp;
fd_set readfds, writefds;
int noCApath = 0, noCAfile = 0;
int build_chain = 0, cbuf_len, cbuf_off, cert_format = FORMAT_PEM;
int key_format = FORMAT_PEM, crlf = 0, full_log = 1, mbuf_len = 0;
int prexit = 0;
int enable_timeouts = 0, sdebug = 0, peerlen = sizeof peer;
int reconnect = 0, verify = SSL_VERIFY_NONE, vpmtouched = 0;
int ret = 1, in_init = 1, i, nbio_test = 0, s = -1, k, width, state = 0;
int sbuf_len, sbuf_off, cmdletters = 1;
int socket_family = AF_UNSPEC, socket_type = SOCK_STREAM;
int starttls_proto = PROTO_OFF, crl_format = FORMAT_PEM, crl_download = 0;
int write_tty, read_tty, write_ssl, read_ssl, tty_on, ssl_pending;
int fallback_scsv = 0;
long socket_mtu = 0, randamt = 0;
OPTION_CHOICE o;
#ifndef OPENSSL_NO_ENGINE
ENGINE *ssl_client_engine = NULL;
#endif
ENGINE *e = NULL;
#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
struct timeval tv;
#endif
char *servername = NULL;
const char *alpn_in = NULL;
tlsextctx tlsextcbp = { NULL, 0 };
const char *ssl_config = NULL;
#define MAX_SI_TYPES 100
unsigned short serverinfo_types[MAX_SI_TYPES];
int serverinfo_count = 0, start = 0, len;
#ifndef OPENSSL_NO_NEXTPROTONEG
const char *next_proto_neg_in = NULL;
#endif
#ifndef OPENSSL_NO_SRP
char *srppass = NULL;
int srp_lateuser = 0;
SRP_ARG srp_arg = { NULL, NULL, 0, 0, 0, 1024 };
#endif
FD_ZERO(&readfds);
FD_ZERO(&writefds);
/* Known false-positive of MemorySanitizer. */
#if defined(__has_feature)
# if __has_feature(memory_sanitizer)
__msan_unpoison(&readfds, sizeof(readfds));
__msan_unpoison(&writefds, sizeof(writefds));
# endif
#endif
prog = opt_progname(argv[0]);
c_quiet = 0;
c_ign_eof = 0;
c_debug = 0;
c_msg = 0;
c_showcerts = 0;
c_nbio = 0;
verify_depth = 0;
verify_error = X509_V_OK;
vpm = X509_VERIFY_PARAM_new();
cbuf = app_malloc(BUFSIZZ, "cbuf");
sbuf = app_malloc(BUFSIZZ, "sbuf");
mbuf = app_malloc(BUFSIZZ, "mbuf");
cctx = SSL_CONF_CTX_new();
if (vpm == NULL || cctx == NULL) {
BIO_printf(bio_err, "%s: out of memory\n", prog);
goto end;
}
SSL_CONF_CTX_set_flags(cctx, SSL_CONF_FLAG_CLIENT | SSL_CONF_FLAG_CMDLINE);
prog = opt_init(argc, argv, s_client_options);
while ((o = opt_next()) != OPT_EOF) {
switch (o) {
case OPT_EOF:
case OPT_ERR:
opthelp:
BIO_printf(bio_err, "%s: Use -help for summary.\n", prog);
goto end;
case OPT_HELP:
opt_help(s_client_options);
ret = 0;
goto end;
case OPT_4:
#ifdef AF_UNIX
if (socket_family == AF_UNIX) {
OPENSSL_free(host); host = NULL;
OPENSSL_free(port); port = NULL;
}
#endif
socket_family = AF_INET;
break;
case OPT_6:
if (1) {
#ifdef AF_INET6
#ifdef AF_UNIX
if (socket_family == AF_UNIX) {
OPENSSL_free(host); host = NULL;
OPENSSL_free(port); port = NULL;
}
#endif
socket_family = AF_INET6;
} else {
#endif
BIO_printf(bio_err, "%s: IPv6 domain sockets unsupported\n", prog);
goto end;
}
break;
case OPT_HOST:
#ifdef AF_UNIX
if (socket_family == AF_UNIX) {
OPENSSL_free(host); host = NULL;
OPENSSL_free(port); port = NULL;
socket_family = AF_UNSPEC;
}
#endif
OPENSSL_free(host); host = BUF_strdup(opt_arg());
break;
case OPT_PORT:
#ifdef AF_UNIX
if (socket_family == AF_UNIX) {
OPENSSL_free(host); host = NULL;
OPENSSL_free(port); port = NULL;
socket_family = AF_UNSPEC;
}
#endif
OPENSSL_free(port); port = BUF_strdup(opt_arg());
break;
case OPT_CONNECT:
#ifdef AF_UNIX
if (socket_family == AF_UNIX) {
socket_family = AF_UNSPEC;
}
#endif
OPENSSL_free(host); host = NULL;
OPENSSL_free(port); port = NULL;
connectstr = opt_arg();
break;
case OPT_PROXY:
proxystr = opt_arg();
starttls_proto = PROTO_CONNECT;
break;
#ifdef AF_UNIX
case OPT_UNIX:
socket_family = AF_UNIX;
OPENSSL_free(host); host = BUF_strdup(opt_arg());
OPENSSL_free(port); port = NULL;
break;
#endif
case OPT_XMPPHOST:
xmpphost = opt_arg();
break;
case OPT_SMTPHOST:
ehlo = opt_arg();
break;
case OPT_VERIFY:
verify = SSL_VERIFY_PEER;
verify_depth = atoi(opt_arg());
if (!c_quiet)
BIO_printf(bio_err, "verify depth is %d\n", verify_depth);
break;
case OPT_CERT:
cert_file = opt_arg();
break;
case OPT_CRL:
crl_file = opt_arg();
break;
case OPT_CRL_DOWNLOAD:
crl_download = 1;
break;
case OPT_SESS_OUT:
sess_out = opt_arg();
break;
case OPT_SESS_IN:
sess_in = opt_arg();
break;
case OPT_CERTFORM:
if (!opt_format(opt_arg(), OPT_FMT_PEMDER, &cert_format))
goto opthelp;
break;
case OPT_CRLFORM:
if (!opt_format(opt_arg(), OPT_FMT_PEMDER, &crl_format))
goto opthelp;
break;
case OPT_VERIFY_RET_ERROR:
verify_return_error = 1;
break;
case OPT_VERIFY_QUIET:
verify_quiet = 1;
break;
case OPT_BRIEF:
c_brief = verify_quiet = c_quiet = 1;
break;
case OPT_S_CASES:
if (ssl_args == NULL)
ssl_args = sk_OPENSSL_STRING_new_null();
if (ssl_args == NULL
|| !sk_OPENSSL_STRING_push(ssl_args, opt_flag())
|| !sk_OPENSSL_STRING_push(ssl_args, opt_arg())) {
BIO_printf(bio_err, "%s: Memory allocation failure\n", prog);
goto end;
}
break;
case OPT_V_CASES:
if (!opt_verify(o, vpm))
goto end;
vpmtouched++;
break;
case OPT_X_CASES:
if (!args_excert(o, &exc))
goto end;
break;
case OPT_PREXIT:
prexit = 1;
break;
case OPT_CRLF:
crlf = 1;
break;
case OPT_QUIET:
c_quiet = c_ign_eof = 1;
break;
case OPT_NBIO:
c_nbio = 1;
break;
case OPT_NOCMDS:
cmdletters = 0;
break;
case OPT_ENGINE:
e = setup_engine(opt_arg(), 1);
break;
case OPT_SSL_CLIENT_ENGINE:
#ifndef OPENSSL_NO_ENGINE
ssl_client_engine = ENGINE_by_id(opt_arg());
if (ssl_client_engine == NULL) {
BIO_printf(bio_err, "Error getting client auth engine\n");
goto opthelp;
}
break;
#endif
break;
case OPT_RAND:
inrand = opt_arg();
break;
case OPT_IGN_EOF:
c_ign_eof = 1;
break;
case OPT_NO_IGN_EOF:
c_ign_eof = 0;
break;
case OPT_DEBUG:
c_debug = 1;
break;
case OPT_TLSEXTDEBUG:
c_tlsextdebug = 1;
break;
case OPT_STATUS:
c_status_req = 1;
break;
case OPT_WDEBUG:
#ifdef WATT32
dbug_init();
#endif
break;
case OPT_MSG:
c_msg = 1;
break;
case OPT_MSGFILE:
bio_c_msg = BIO_new_file(opt_arg(), "w");
break;
case OPT_TRACE:
#ifndef OPENSSL_NO_SSL_TRACE
c_msg = 2;
#endif
break;
case OPT_SECURITY_DEBUG:
sdebug = 1;
break;
case OPT_SECURITY_DEBUG_VERBOSE:
sdebug = 2;
break;
case OPT_SHOWCERTS:
c_showcerts = 1;
break;
case OPT_NBIO_TEST:
nbio_test = 1;
break;
case OPT_STATE:
state = 1;
break;
#ifndef OPENSSL_NO_PSK
case OPT_PSK_IDENTITY:
psk_identity = opt_arg();
break;
case OPT_PSK:
for (p = psk_key = opt_arg(); *p; p++) {
if (isxdigit(_UC(*p)))
continue;
BIO_printf(bio_err, "Not a hex number '%s'\n", psk_key);
goto end;
}
break;
#else
case OPT_PSK_IDENTITY:
case OPT_PSK:
break;
#endif
#ifndef OPENSSL_NO_SRP
case OPT_SRPUSER:
srp_arg.srplogin = opt_arg();
meth = TLSv1_client_method();
break;
case OPT_SRPPASS:
srppass = opt_arg();
meth = TLSv1_client_method();
break;
case OPT_SRP_STRENGTH:
srp_arg.strength = atoi(opt_arg());
BIO_printf(bio_err, "SRP minimal length for N is %d\n",
srp_arg.strength);
meth = TLSv1_client_method();
break;
case OPT_SRP_LATEUSER:
srp_lateuser = 1;
meth = TLSv1_client_method();
break;
case OPT_SRP_MOREGROUPS:
srp_arg.amp = 1;
meth = TLSv1_client_method();
break;
#else
case OPT_SRPUSER:
case OPT_SRPPASS:
case OPT_SRP_STRENGTH:
case OPT_SRP_LATEUSER:
case OPT_SRP_MOREGROUPS:
break;
#endif
case OPT_SSL_CONFIG:
ssl_config = opt_arg();
break;
case OPT_SSL3:
#ifndef OPENSSL_NO_SSL3
meth = SSLv3_client_method();
#endif
break;
case OPT_TLS1_2:
#ifndef OPENSSL_NO_TLS1_2
meth = TLSv1_2_client_method();
#endif
break;
case OPT_TLS1_1:
#ifndef OPENSSL_NO_TLS1_1
meth = TLSv1_1_client_method();
#endif
break;
case OPT_TLS1:
#ifndef OPENSSL_NO_TLS1
meth = TLSv1_client_method();
#endif
break;
case OPT_DTLS:
#ifndef OPENSSL_NO_DTLS
meth = DTLS_client_method();
socket_type = SOCK_DGRAM;
#endif
break;
case OPT_DTLS1:
#ifndef OPENSSL_NO_DTLS1
meth = DTLSv1_client_method();
socket_type = SOCK_DGRAM;
#endif
break;
case OPT_DTLS1_2:
#ifndef OPENSSL_NO_DTLS1_2
meth = DTLSv1_2_client_method();
socket_type = SOCK_DGRAM;
#endif
break;
case OPT_TIMEOUT:
#ifndef OPENSSL_NO_DTLS
enable_timeouts = 1;
#endif
break;
case OPT_MTU:
#ifndef OPENSSL_NO_DTLS
socket_mtu = atol(opt_arg());
#endif
break;
case OPT_FALLBACKSCSV:
fallback_scsv = 1;
break;
case OPT_KEYFORM:
if (!opt_format(opt_arg(), OPT_FMT_PEMDER, &key_format))
goto opthelp;
break;
case OPT_PASS:
passarg = opt_arg();
break;
case OPT_CERT_CHAIN:
chain_file = opt_arg();
break;
case OPT_KEY:
key_file = opt_arg();
break;
case OPT_RECONNECT:
reconnect = 5;
break;
case OPT_CAPATH:
CApath = opt_arg();
break;
case OPT_NOCAPATH:
noCApath = 1;
break;
case OPT_CHAINCAPATH:
chCApath = opt_arg();
break;
case OPT_VERIFYCAPATH:
vfyCApath = opt_arg();
break;
case OPT_BUILD_CHAIN:
build_chain = 1;
break;
case OPT_CAFILE:
CAfile = opt_arg();
break;
case OPT_NOCAFILE:
noCAfile = 1;
break;
case OPT_CHAINCAFILE:
chCAfile = opt_arg();
break;
case OPT_VERIFYCAFILE:
vfyCAfile = opt_arg();
break;
case OPT_DANE_TLSA_DOMAIN:
dane_tlsa_domain = opt_arg();
break;
case OPT_DANE_TLSA_RRDATA:
if (dane_tlsa_rrset == NULL)
dane_tlsa_rrset = sk_OPENSSL_STRING_new_null();
if (dane_tlsa_rrset == NULL ||
!sk_OPENSSL_STRING_push(dane_tlsa_rrset, opt_arg())) {
BIO_printf(bio_err, "%s: Memory allocation failure\n", prog);
goto end;
}
break;
case OPT_NEXTPROTONEG:
next_proto_neg_in = opt_arg();
break;
case OPT_ALPN:
alpn_in = opt_arg();
break;
case OPT_SERVERINFO:
p = opt_arg();
len = strlen(p);
for (start = 0, i = 0; i <= len; ++i) {
if (i == len || p[i] == ',') {
serverinfo_types[serverinfo_count] = atoi(p + start);
if (++serverinfo_count == MAX_SI_TYPES)
break;
start = i + 1;
}
}
break;
case OPT_STARTTLS:
if (!opt_pair(opt_arg(), services, &starttls_proto))
goto end;
case OPT_SERVERNAME:
servername = opt_arg();
break;
case OPT_USE_SRTP:
srtp_profiles = opt_arg();
break;
case OPT_KEYMATEXPORT:
keymatexportlabel = opt_arg();
break;
case OPT_KEYMATEXPORTLEN:
keymatexportlen = atoi(opt_arg());
break;
case OPT_ASYNC:
async = 1;
break;
}
}
argc = opt_num_rest();
if (argc != 0)
goto opthelp;
if (proxystr) {
int res;
char *tmp_host = host, *tmp_port = port;
if (connectstr == NULL) {
BIO_printf(bio_err, "%s: -proxy requires use of -connect\n", prog);
goto opthelp;
}
res = BIO_parse_hostserv(proxystr, &host, &port, BIO_PARSE_PRIO_HOST);
if (tmp_host != host)
OPENSSL_free(tmp_host);
if (tmp_port != port)
OPENSSL_free(tmp_port);
if (!res) {
BIO_printf(bio_err, "%s: -proxy argument malformed or ambiguous\n",
prog);
goto end;
}
} else {
int res = 1;
char *tmp_host = host, *tmp_port = port;
if (connectstr != NULL)
res = BIO_parse_hostserv(connectstr, &host, &port,
BIO_PARSE_PRIO_HOST);
if (tmp_host != host)
OPENSSL_free(tmp_host);
if (tmp_port != port)
OPENSSL_free(tmp_port);
if (!res) {
BIO_printf(bio_err,
"%s: -connect argument malformed or ambiguous\n",
prog);
goto end;
}
}
if (socket_family == AF_UNIX && socket_type != SOCK_STREAM) {
BIO_printf(bio_err,
"Can't use unix sockets and datagrams together\n");
goto end;
}
#if !defined(OPENSSL_NO_NEXTPROTONEG)
next_proto.status = -1;
if (next_proto_neg_in) {
next_proto.data =
next_protos_parse(&next_proto.len, next_proto_neg_in);
if (next_proto.data == NULL) {
BIO_printf(bio_err, "Error parsing -nextprotoneg argument\n");
goto end;
}
} else
next_proto.data = NULL;
#endif
if (!app_passwd(passarg, NULL, &pass, NULL)) {
BIO_printf(bio_err, "Error getting password\n");
goto end;
}
if (key_file == NULL)
key_file = cert_file;
if (key_file) {
key = load_key(key_file, key_format, 0, pass, e,
"client certificate private key file");
if (key == NULL) {
ERR_print_errors(bio_err);
goto end;
}
}
if (cert_file) {
cert = load_cert(cert_file, cert_format, "client certificate file");
if (cert == NULL) {
ERR_print_errors(bio_err);
goto end;
}
}
if (chain_file) {
if (!load_certs(chain_file, &chain, FORMAT_PEM, NULL,
"client certificate chain"))
goto end;
}
if (crl_file) {
X509_CRL *crl;
crl = load_crl(crl_file, crl_format);
if (crl == NULL) {
BIO_puts(bio_err, "Error loading CRL\n");
ERR_print_errors(bio_err);
goto end;
}
crls = sk_X509_CRL_new_null();
if (crls == NULL || !sk_X509_CRL_push(crls, crl)) {
BIO_puts(bio_err, "Error adding CRL\n");
ERR_print_errors(bio_err);
X509_CRL_free(crl);
goto end;
}
}
if (!load_excert(&exc))
goto end;
if (!app_RAND_load_file(NULL, 1) && inrand == NULL
&& !RAND_status()) {
BIO_printf(bio_err,
"warning, not much extra random data, consider using the -rand option\n");
}
if (inrand != NULL) {
randamt = app_RAND_load_files(inrand);
BIO_printf(bio_err, "%ld semi-random bytes loaded\n", randamt);
}
if (bio_c_out == NULL) {
if (c_quiet && !c_debug) {
bio_c_out = BIO_new(BIO_s_null());
if (c_msg && !bio_c_msg)
bio_c_msg = dup_bio_out(FORMAT_TEXT);
} else if (bio_c_out == NULL)
bio_c_out = dup_bio_out(FORMAT_TEXT);
}
#ifndef OPENSSL_NO_SRP
if (!app_passwd(srppass, NULL, &srp_arg.srppassin, NULL)) {
BIO_printf(bio_err, "Error getting password\n");
goto end;
}
#endif
ctx = SSL_CTX_new(meth);
if (ctx == NULL) {
ERR_print_errors(bio_err);
goto end;
}
if (sdebug)
ssl_ctx_security_debug(ctx, sdebug);
if (ssl_config) {
if (SSL_CTX_config(ctx, ssl_config) == 0) {
BIO_printf(bio_err, "Error using configuration \"%s\"\n",
ssl_config);
ERR_print_errors(bio_err);
goto end;
}
}
if (vpmtouched && !SSL_CTX_set1_param(ctx, vpm)) {
BIO_printf(bio_err, "Error setting verify params\n");
ERR_print_errors(bio_err);
goto end;
}
if (async) {
SSL_CTX_set_mode(ctx, SSL_MODE_ASYNC);
}
if (!config_ctx(cctx, ssl_args, ctx))
goto end;
if (!ssl_load_stores(ctx, vfyCApath, vfyCAfile, chCApath, chCAfile,
crls, crl_download)) {
BIO_printf(bio_err, "Error loading store locations\n");
ERR_print_errors(bio_err);
goto end;
}
#ifndef OPENSSL_NO_ENGINE
if (ssl_client_engine) {
if (!SSL_CTX_set_client_cert_engine(ctx, ssl_client_engine)) {
BIO_puts(bio_err, "Error setting client auth engine\n");
ERR_print_errors(bio_err);
ENGINE_free(ssl_client_engine);
goto end;
}
ENGINE_free(ssl_client_engine);
}
#endif
#ifndef OPENSSL_NO_PSK
if (psk_key != NULL) {
if (c_debug)
BIO_printf(bio_c_out,
"PSK key given, setting client callback\n");
SSL_CTX_set_psk_client_callback(ctx, psk_client_cb);
}
#endif
#ifndef OPENSSL_NO_SRTP
if (srtp_profiles != NULL) {
/* Returns 0 on success! */
if (SSL_CTX_set_tlsext_use_srtp(ctx, srtp_profiles) != 0) {
BIO_printf(bio_err, "Error setting SRTP profile\n");
ERR_print_errors(bio_err);
goto end;
}
}
#endif
if (exc)
ssl_ctx_set_excert(ctx, exc);
#if !defined(OPENSSL_NO_NEXTPROTONEG)
if (next_proto.data)
SSL_CTX_set_next_proto_select_cb(ctx, next_proto_cb, &next_proto);
#endif
if (alpn_in) {
unsigned short alpn_len;
unsigned char *alpn = next_protos_parse(&alpn_len, alpn_in);
if (alpn == NULL) {
BIO_printf(bio_err, "Error parsing -alpn argument\n");
goto end;
}
/* Returns 0 on success! */
if (SSL_CTX_set_alpn_protos(ctx, alpn, alpn_len) != 0) {
BIO_printf(bio_err, "Error setting ALPN\n");
goto end;
}
OPENSSL_free(alpn);
}
for (i = 0; i < serverinfo_count; i++) {
if (!SSL_CTX_add_client_custom_ext(ctx,
serverinfo_types[i],
NULL, NULL, NULL,
serverinfo_cli_parse_cb, NULL)) {
BIO_printf(bio_err,
"Warning: Unable to add custom extension %u, skipping\n",
serverinfo_types[i]);
}
}
if (state)
SSL_CTX_set_info_callback(ctx, apps_ssl_info_callback);
SSL_CTX_set_verify(ctx, verify, verify_callback);
if (!ctx_set_verify_locations(ctx, CAfile, CApath, noCAfile, noCApath)) {
ERR_print_errors(bio_err);
goto end;
}
ssl_ctx_add_crls(ctx, crls, crl_download);
if (!set_cert_key_stuff(ctx, cert, key, chain, build_chain))
goto end;
if (servername != NULL) {
tlsextcbp.biodebug = bio_err;
SSL_CTX_set_tlsext_servername_callback(ctx, ssl_servername_cb);
SSL_CTX_set_tlsext_servername_arg(ctx, &tlsextcbp);
}
# ifndef OPENSSL_NO_SRP
if (srp_arg.srplogin) {
if (!srp_lateuser && !SSL_CTX_set_srp_username(ctx, srp_arg.srplogin)) {
BIO_printf(bio_err, "Unable to set SRP username\n");
goto end;
}
srp_arg.msg = c_msg;
srp_arg.debug = c_debug;
SSL_CTX_set_srp_cb_arg(ctx, &srp_arg);
SSL_CTX_set_srp_client_pwd_callback(ctx, ssl_give_srp_client_pwd_cb);
SSL_CTX_set_srp_strength(ctx, srp_arg.strength);
if (c_msg || c_debug || srp_arg.amp == 0)
SSL_CTX_set_srp_verify_param_callback(ctx,
ssl_srp_verify_param_cb);
}
# endif
if (dane_tlsa_domain != NULL) {
if (SSL_CTX_dane_enable(ctx) <= 0) {
BIO_printf(bio_err,
"%s: Error enabling DANE TLSA authentication.\n", prog);
ERR_print_errors(bio_err);
goto end;
}
}
con = SSL_new(ctx);
if (sess_in) {
SSL_SESSION *sess;
BIO *stmp = BIO_new_file(sess_in, "r");
if (!stmp) {
BIO_printf(bio_err, "Can't open session file %s\n", sess_in);
ERR_print_errors(bio_err);
goto end;
}
sess = PEM_read_bio_SSL_SESSION(stmp, NULL, 0, NULL);
BIO_free(stmp);
if (!sess) {
BIO_printf(bio_err, "Can't open session file %s\n", sess_in);
ERR_print_errors(bio_err);
goto end;
}
if (!SSL_set_session(con, sess)) {
BIO_printf(bio_err, "Can't set session\n");
ERR_print_errors(bio_err);
goto end;
}
SSL_SESSION_free(sess);
}
if (fallback_scsv)
SSL_set_mode(con, SSL_MODE_SEND_FALLBACK_SCSV);
if (servername != NULL) {
if (!SSL_set_tlsext_host_name(con, servername)) {
BIO_printf(bio_err, "Unable to set TLS servername extension.\n");
ERR_print_errors(bio_err);
goto end;
}
}
if (dane_tlsa_domain != NULL) {
if (SSL_dane_enable(con, dane_tlsa_domain) <= 0) {
BIO_printf(bio_err, "%s: Error enabling DANE TLSA "
"authentication.\n", prog);
ERR_print_errors(bio_err);
goto end;
}
if (dane_tlsa_rrset == NULL) {
BIO_printf(bio_err, "%s: DANE TLSA authentication requires at "
"least one -dane_tlsa_rrset option.\n", prog);
goto end;
}
if (tlsa_import_rrset(con, dane_tlsa_rrset) <= 0) {
BIO_printf(bio_err, "%s: Failed to import any TLSA "
"records.\n", prog);
goto end;
}
} else if (dane_tlsa_rrset != NULL) {
BIO_printf(bio_err, "%s: DANE TLSA authentication requires the "
"-dane_tlsa_domain option.\n", prog);
goto end;
}
re_start:
if (init_client(&s, host, port, socket_family, socket_type) == 0)
{
BIO_printf(bio_err, "connect:errno=%d\n", get_last_socket_error());
SHUTDOWN(s);
goto end;
}
BIO_printf(bio_c_out, "CONNECTED(%08X)\n", s);
if (c_nbio) {
if (!BIO_socket_nbio(s, 1)) {
ERR_print_errors(bio_err);
goto end;
}
BIO_printf(bio_c_out, "Turned on non blocking io\n");
}
if (socket_type == SOCK_DGRAM) {
sbio = BIO_new_dgram(s, BIO_NOCLOSE);
if (getsockname(s, &peer, (void *)&peerlen) < 0) {
BIO_printf(bio_err, "getsockname:errno=%d\n",
get_last_socket_error());
SHUTDOWN(s);
goto end;
}
(void)BIO_ctrl_set_connected(sbio, &peer);
if (enable_timeouts) {
timeout.tv_sec = 0;
timeout.tv_usec = DGRAM_RCV_TIMEOUT;
BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_RECV_TIMEOUT, 0, &timeout);
timeout.tv_sec = 0;
timeout.tv_usec = DGRAM_SND_TIMEOUT;
BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_SEND_TIMEOUT, 0, &timeout);
}
if (socket_mtu) {
if (socket_mtu < DTLS_get_link_min_mtu(con)) {
BIO_printf(bio_err, "MTU too small. Must be at least %ld\n",
DTLS_get_link_min_mtu(con));
BIO_free(sbio);
goto shut;
}
SSL_set_options(con, SSL_OP_NO_QUERY_MTU);
if (!DTLS_set_link_mtu(con, socket_mtu)) {
BIO_printf(bio_err, "Failed to set MTU\n");
BIO_free(sbio);
goto shut;
}
} else
/* want to do MTU discovery */
BIO_ctrl(sbio, BIO_CTRL_DGRAM_MTU_DISCOVER, 0, NULL);
} else
sbio = BIO_new_socket(s, BIO_NOCLOSE);
if (nbio_test) {
BIO *test;
test = BIO_new(BIO_f_nbio_test());
sbio = BIO_push(test, sbio);
}
if (c_debug) {
BIO_set_callback(sbio, bio_dump_callback);
BIO_set_callback_arg(sbio, (char *)bio_c_out);
}
if (c_msg) {
#ifndef OPENSSL_NO_SSL_TRACE
if (c_msg == 2)
SSL_set_msg_callback(con, SSL_trace);
else
#endif
SSL_set_msg_callback(con, msg_cb);
SSL_set_msg_callback_arg(con, bio_c_msg ? bio_c_msg : bio_c_out);
}
if (c_tlsextdebug) {
SSL_set_tlsext_debug_callback(con, tlsext_cb);
SSL_set_tlsext_debug_arg(con, bio_c_out);
}
if (c_status_req) {
SSL_set_tlsext_status_type(con, TLSEXT_STATUSTYPE_ocsp);
SSL_CTX_set_tlsext_status_cb(ctx, ocsp_resp_cb);
SSL_CTX_set_tlsext_status_arg(ctx, bio_c_out);
}
SSL_set_bio(con, sbio, sbio);
SSL_set_connect_state(con);
/* ok, lets connect */
width = SSL_get_fd(con) + 1;
read_tty = 1;
write_tty = 0;
tty_on = 0;
read_ssl = 1;
write_ssl = 1;
cbuf_len = 0;
cbuf_off = 0;
sbuf_len = 0;
sbuf_off = 0;
switch ((PROTOCOL_CHOICE) starttls_proto) {
case PROTO_OFF:
break;
case PROTO_SMTP:
{
/*
* This is an ugly hack that does a lot of assumptions. We do
* have to handle multi-line responses which may come in a single
* packet or not. We therefore have to use BIO_gets() which does
* need a buffering BIO. So during the initial chitchat we do
* push a buffering BIO into the chain that is removed again
* later on to not disturb the rest of the s_client operation.
*/
int foundit = 0;
BIO *fbio = BIO_new(BIO_f_buffer());
BIO_push(fbio, sbio);
/* wait for multi-line response to end from SMTP */
do {
mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
}
while (mbuf_len > 3 && mbuf[3] == '-');
BIO_printf(fbio, "EHLO %s\r\n", ehlo);
(void)BIO_flush(fbio);
/* wait for multi-line response to end EHLO SMTP response */
do {
mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
if (strstr(mbuf, "STARTTLS"))
foundit = 1;
}
while (mbuf_len > 3 && mbuf[3] == '-');
(void)BIO_flush(fbio);
BIO_pop(fbio);
BIO_free(fbio);
if (!foundit)
BIO_printf(bio_err,
"didn't find starttls in server response,"
" trying anyway...\n");
BIO_printf(sbio, "STARTTLS\r\n");
BIO_read(sbio, sbuf, BUFSIZZ);
}
break;
case PROTO_POP3:
{
BIO_read(sbio, mbuf, BUFSIZZ);
BIO_printf(sbio, "STLS\r\n");
mbuf_len = BIO_read(sbio, sbuf, BUFSIZZ);
if (mbuf_len < 0) {
BIO_printf(bio_err, "BIO_read failed\n");
goto end;
}
}
break;
case PROTO_IMAP:
{
int foundit = 0;
BIO *fbio = BIO_new(BIO_f_buffer());
BIO_push(fbio, sbio);
BIO_gets(fbio, mbuf, BUFSIZZ);
/* STARTTLS command requires CAPABILITY... */
BIO_printf(fbio, ". CAPABILITY\r\n");
(void)BIO_flush(fbio);
/* wait for multi-line CAPABILITY response */
do {
mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
if (strstr(mbuf, "STARTTLS"))
foundit = 1;
}
while (mbuf_len > 3 && mbuf[0] != '.');
(void)BIO_flush(fbio);
BIO_pop(fbio);
BIO_free(fbio);
if (!foundit)
BIO_printf(bio_err,
"didn't find STARTTLS in server response,"
" trying anyway...\n");
BIO_printf(sbio, ". STARTTLS\r\n");
BIO_read(sbio, sbuf, BUFSIZZ);
}
break;
case PROTO_FTP:
{
BIO *fbio = BIO_new(BIO_f_buffer());
BIO_push(fbio, sbio);
/* wait for multi-line response to end from FTP */
do {
mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
}
while (mbuf_len > 3 && mbuf[3] == '-');
(void)BIO_flush(fbio);
BIO_pop(fbio);
BIO_free(fbio);
BIO_printf(sbio, "AUTH TLS\r\n");
BIO_read(sbio, sbuf, BUFSIZZ);
}
break;
case PROTO_XMPP:
case PROTO_XMPP_SERVER:
{
int seen = 0;
BIO_printf(sbio, "<stream:stream "
"xmlns:stream='http://etherx.jabber.org/streams' "
"xmlns='jabber:%s' to='%s' version='1.0'>",
starttls_proto == PROTO_XMPP ? "client" : "server",
xmpphost ? xmpphost : host);
seen = BIO_read(sbio, mbuf, BUFSIZZ);
mbuf[seen] = 0;
while (!strstr
(mbuf, "<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'")
&& !strstr(mbuf,
"<starttls xmlns=\"urn:ietf:params:xml:ns:xmpp-tls\""))
{
seen = BIO_read(sbio, mbuf, BUFSIZZ);
if (seen <= 0)
goto shut;
mbuf[seen] = 0;
}
BIO_printf(sbio,
"<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'/>");
seen = BIO_read(sbio, sbuf, BUFSIZZ);
sbuf[seen] = 0;
if (!strstr(sbuf, "<proceed"))
goto shut;
mbuf[0] = 0;
}
break;
case PROTO_TELNET:
{
static const unsigned char tls_do[] = {
/* IAC DO START_TLS */
255, 253, 46
};
static const unsigned char tls_will[] = {
/* IAC WILL START_TLS */
255, 251, 46
};
static const unsigned char tls_follows[] = {
/* IAC SB START_TLS FOLLOWS IAC SE */
255, 250, 46, 1, 255, 240
};
int bytes;
/* Telnet server should demand we issue START_TLS */
bytes = BIO_read(sbio, mbuf, BUFSIZZ);
if (bytes != 3 || memcmp(mbuf, tls_do, 3) != 0)
goto shut;
/* Agree to issue START_TLS and send the FOLLOWS sub-command */
BIO_write(sbio, tls_will, 3);
BIO_write(sbio, tls_follows, 6);
(void)BIO_flush(sbio);
/* Telnet server also sent the FOLLOWS sub-command */
bytes = BIO_read(sbio, mbuf, BUFSIZZ);
if (bytes != 6 || memcmp(mbuf, tls_follows, 6) != 0)
goto shut;
}
break;
case PROTO_CONNECT:
{
int foundit = 0;
BIO *fbio = BIO_new(BIO_f_buffer());
BIO_push(fbio, sbio);
BIO_printf(fbio, "CONNECT %s\r\n\r\n", connectstr);
(void)BIO_flush(fbio);
/* wait for multi-line response to end CONNECT response */
do {
mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
if (strstr(mbuf, "200") != NULL
&& strstr(mbuf, "established") != NULL)
foundit++;
} while (mbuf_len > 3 && foundit == 0);
(void)BIO_flush(fbio);
BIO_pop(fbio);
BIO_free(fbio);
if (!foundit) {
BIO_printf(bio_err, "%s: HTTP CONNECT failed\n", prog);
goto shut;
}
}
break;
case PROTO_IRC:
{
int numeric;
BIO *fbio = BIO_new(BIO_f_buffer());
BIO_push(fbio, sbio);
BIO_printf(fbio, "STARTTLS\r\n");
(void)BIO_flush(fbio);
width = SSL_get_fd(con) + 1;
do {
numeric = 0;
FD_ZERO(&readfds);
openssl_fdset(SSL_get_fd(con), &readfds);
timeout.tv_sec = S_CLIENT_IRC_READ_TIMEOUT;
timeout.tv_usec = 0;
/*
* If the IRCd doesn't respond within
* S_CLIENT_IRC_READ_TIMEOUT seconds, assume
* it doesn't support STARTTLS. Many IRCds
* will not give _any_ sort of response to a
* STARTTLS command when it's not supported.
*/
if (!BIO_get_buffer_num_lines(fbio)
&& !BIO_pending(fbio)
&& !BIO_pending(sbio)
&& select(width, (void *)&readfds, NULL, NULL,
&timeout) < 1) {
BIO_printf(bio_err,
"Timeout waiting for response (%d seconds).\n",
S_CLIENT_IRC_READ_TIMEOUT);
break;
}
mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
if (mbuf_len < 1 || sscanf(mbuf, "%*s %d", &numeric) != 1)
break;
/* :example.net 451 STARTTLS :You have not registered */
/* :example.net 421 STARTTLS :Unknown command */
if ((numeric == 451 || numeric == 421)
&& strstr(mbuf, "STARTTLS") != NULL) {
BIO_printf(bio_err, "STARTTLS not supported: %s", mbuf);
break;
}
if (numeric == 691) {
BIO_printf(bio_err, "STARTTLS negotiation failed: ");
ERR_print_errors(bio_err);
break;
}
} while (numeric != 670);
(void)BIO_flush(fbio);
BIO_pop(fbio);
BIO_free(fbio);
if (numeric != 670) {
BIO_printf(bio_err, "Server does not support STARTTLS.\n");
ret = 1;
goto shut;
}
}
}
for (;;) {
FD_ZERO(&readfds);
FD_ZERO(&writefds);
if ((SSL_version(con) == DTLS1_VERSION) &&
DTLSv1_get_timeout(con, &timeout))
timeoutp = &timeout;
else
timeoutp = NULL;
if (SSL_in_init(con) && !SSL_total_renegotiations(con)) {
in_init = 1;
tty_on = 0;
} else {
tty_on = 1;
if (in_init) {
in_init = 0;
if (servername != NULL && !SSL_session_reused(con)) {
BIO_printf(bio_c_out,
"Server did %sacknowledge servername extension.\n",
tlsextcbp.ack ? "" : "not ");
}
if (sess_out) {
BIO *stmp = BIO_new_file(sess_out, "w");
if (stmp) {
PEM_write_bio_SSL_SESSION(stmp, SSL_get_session(con));
BIO_free(stmp);
} else
BIO_printf(bio_err, "Error writing session file %s\n",
sess_out);
}
if (c_brief) {
BIO_puts(bio_err, "CONNECTION ESTABLISHED\n");
print_ssl_summary(con);
}
print_stuff(bio_c_out, con, full_log);
if (full_log > 0)
full_log--;
if (starttls_proto) {
BIO_write(bio_err, mbuf, mbuf_len);
/* We don't need to know any more */
if (!reconnect)
starttls_proto = PROTO_OFF;
}
if (reconnect) {
reconnect--;
BIO_printf(bio_c_out,
"drop connection and then reconnect\n");
do_ssl_shutdown(con);
SSL_set_connect_state(con);
SHUTDOWN(SSL_get_fd(con));
goto re_start;
}
}
}
ssl_pending = read_ssl && SSL_pending(con);
if (!ssl_pending) {
#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_NETWARE)
if (tty_on) {
if (read_tty)
openssl_fdset(fileno(stdin), &readfds);
if (write_tty)
openssl_fdset(fileno(stdout), &writefds);
}
if (read_ssl)
openssl_fdset(SSL_get_fd(con), &readfds);
if (write_ssl)
openssl_fdset(SSL_get_fd(con), &writefds);
#else
if (!tty_on || !write_tty) {
if (read_ssl)
openssl_fdset(SSL_get_fd(con), &readfds);
if (write_ssl)
openssl_fdset(SSL_get_fd(con), &writefds);
}
#endif
/*
* Note: under VMS with SOCKETSHR the second parameter is
* currently of type (int *) whereas under other systems it is
* (void *) if you don't have a cast it will choke the compiler:
* if you do have a cast then you can either go for (int *) or
* (void *).
*/
#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
/*
* Under Windows/DOS we make the assumption that we can always
* write to the tty: therefore if we need to write to the tty we
* just fall through. Otherwise we timeout the select every
* second and see if there are any keypresses. Note: this is a
* hack, in a proper Windows application we wouldn't do this.
*/
i = 0;
if (!write_tty) {
if (read_tty) {
tv.tv_sec = 1;
tv.tv_usec = 0;
i = select(width, (void *)&readfds, (void *)&writefds,
NULL, &tv);
# if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
if (!i && (!_kbhit() || !read_tty))
continue;
# else
if (!i && (!((_kbhit())
|| (WAIT_OBJECT_0 ==
WaitForSingleObject(GetStdHandle
(STD_INPUT_HANDLE),
0)))
|| !read_tty))
continue;
# endif
} else
i = select(width, (void *)&readfds, (void *)&writefds,
NULL, timeoutp);
}
#elif defined(OPENSSL_SYS_NETWARE)
if (!write_tty) {
if (read_tty) {
tv.tv_sec = 1;
tv.tv_usec = 0;
i = select(width, (void *)&readfds, (void *)&writefds,
NULL, &tv);
} else
i = select(width, (void *)&readfds, (void *)&writefds,
NULL, timeoutp);
}
#else
i = select(width, (void *)&readfds, (void *)&writefds,
NULL, timeoutp);
#endif
if (i < 0) {
BIO_printf(bio_err, "bad select %d\n",
get_last_socket_error());
goto shut;
/* goto end; */
}
}
if ((SSL_version(con) == DTLS1_VERSION)
&& DTLSv1_handle_timeout(con) > 0) {
BIO_printf(bio_err, "TIMEOUT occurred\n");
}
if (!ssl_pending && FD_ISSET(SSL_get_fd(con), &writefds)) {
k = SSL_write(con, &(cbuf[cbuf_off]), (unsigned int)cbuf_len);
switch (SSL_get_error(con, k)) {
case SSL_ERROR_NONE:
cbuf_off += k;
cbuf_len -= k;
if (k <= 0)
goto end;
/* we have done a write(con,NULL,0); */
if (cbuf_len <= 0) {
read_tty = 1;
write_ssl = 0;
} else { /* if (cbuf_len > 0) */
read_tty = 0;
write_ssl = 1;
}
break;
case SSL_ERROR_WANT_WRITE:
BIO_printf(bio_c_out, "write W BLOCK\n");
write_ssl = 1;
read_tty = 0;
break;
case SSL_ERROR_WANT_ASYNC:
BIO_printf(bio_c_out, "write A BLOCK\n");
wait_for_async(con);
write_ssl = 1;
read_tty = 0;
break;
case SSL_ERROR_WANT_READ:
BIO_printf(bio_c_out, "write R BLOCK\n");
write_tty = 0;
read_ssl = 1;
write_ssl = 0;
break;
case SSL_ERROR_WANT_X509_LOOKUP:
BIO_printf(bio_c_out, "write X BLOCK\n");
break;
case SSL_ERROR_ZERO_RETURN:
if (cbuf_len != 0) {
BIO_printf(bio_c_out, "shutdown\n");
ret = 0;
goto shut;
} else {
read_tty = 1;
write_ssl = 0;
break;
}
case SSL_ERROR_SYSCALL:
if ((k != 0) || (cbuf_len != 0)) {
BIO_printf(bio_err, "write:errno=%d\n",
get_last_socket_error());
goto shut;
} else {
read_tty = 1;
write_ssl = 0;
}
break;
case SSL_ERROR_SSL:
ERR_print_errors(bio_err);
goto shut;
}
}
#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
/* Assume Windows/DOS/BeOS can always write */
else if (!ssl_pending && write_tty)
#else
else if (!ssl_pending && FD_ISSET(fileno(stdout), &writefds))
#endif
{
#ifdef CHARSET_EBCDIC
ascii2ebcdic(&(sbuf[sbuf_off]), &(sbuf[sbuf_off]), sbuf_len);
#endif
i = raw_write_stdout(&(sbuf[sbuf_off]), sbuf_len);
if (i <= 0) {
BIO_printf(bio_c_out, "DONE\n");
ret = 0;
goto shut;
/* goto end; */
}
sbuf_len -= i;;
sbuf_off += i;
if (sbuf_len <= 0) {
read_ssl = 1;
write_tty = 0;
}
} else if (ssl_pending || FD_ISSET(SSL_get_fd(con), &readfds)) {
#ifdef RENEG
{
static int iiii;
if (++iiii == 52) {
SSL_renegotiate(con);
iiii = 0;
}
}
#endif
k = SSL_read(con, sbuf, 1024 /* BUFSIZZ */ );
switch (SSL_get_error(con, k)) {
case SSL_ERROR_NONE:
if (k <= 0)
goto end;
sbuf_off = 0;
sbuf_len = k;
read_ssl = 0;
write_tty = 1;
break;
case SSL_ERROR_WANT_ASYNC:
BIO_printf(bio_c_out, "read A BLOCK\n");
wait_for_async(con);
write_tty = 0;
read_ssl = 1;
if ((read_tty == 0) && (write_ssl == 0))
write_ssl = 1;
break;
case SSL_ERROR_WANT_WRITE:
BIO_printf(bio_c_out, "read W BLOCK\n");
write_ssl = 1;
read_tty = 0;
break;
case SSL_ERROR_WANT_READ:
BIO_printf(bio_c_out, "read R BLOCK\n");
write_tty = 0;
read_ssl = 1;
if ((read_tty == 0) && (write_ssl == 0))
write_ssl = 1;
break;
case SSL_ERROR_WANT_X509_LOOKUP:
BIO_printf(bio_c_out, "read X BLOCK\n");
break;
case SSL_ERROR_SYSCALL:
ret = get_last_socket_error();
if (c_brief)
BIO_puts(bio_err, "CONNECTION CLOSED BY SERVER\n");
else
BIO_printf(bio_err, "read:errno=%d\n", ret);
goto shut;
case SSL_ERROR_ZERO_RETURN:
BIO_printf(bio_c_out, "closed\n");
ret = 0;
goto shut;
case SSL_ERROR_SSL:
ERR_print_errors(bio_err);
goto shut;
/* break; */
}
}
#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
# if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
else if (_kbhit())
# else
else if ((_kbhit())
|| (WAIT_OBJECT_0 ==
WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0)))
# endif
#elif defined (OPENSSL_SYS_NETWARE)
else if (_kbhit())
#else
else if (FD_ISSET(fileno(stdin), &readfds))
#endif
{
if (crlf) {
int j, lf_num;
i = raw_read_stdin(cbuf, BUFSIZZ / 2);
lf_num = 0;
/* both loops are skipped when i <= 0 */
for (j = 0; j < i; j++)
if (cbuf[j] == '\n')
lf_num++;
for (j = i - 1; j >= 0; j--) {
cbuf[j + lf_num] = cbuf[j];
if (cbuf[j] == '\n') {
lf_num--;
i++;
cbuf[j + lf_num] = '\r';
}
}
assert(lf_num == 0);
} else
i = raw_read_stdin(cbuf, BUFSIZZ);
if ((!c_ign_eof) && ((i <= 0) || (cbuf[0] == 'Q' && cmdletters))) {
BIO_printf(bio_err, "DONE\n");
ret = 0;
goto shut;
}
if ((!c_ign_eof) && (cbuf[0] == 'R' && cmdletters)) {
BIO_printf(bio_err, "RENEGOTIATING\n");
SSL_renegotiate(con);
cbuf_len = 0;
}
#ifndef OPENSSL_NO_HEARTBEATS
else if ((!c_ign_eof) && (cbuf[0] == 'B' && cmdletters)) {
BIO_printf(bio_err, "HEARTBEATING\n");
SSL_heartbeat(con);
cbuf_len = 0;
}
#endif
else {
cbuf_len = i;
cbuf_off = 0;
#ifdef CHARSET_EBCDIC
ebcdic2ascii(cbuf, cbuf, i);
#endif
}
write_ssl = 1;
read_tty = 0;
}
}
ret = 0;
shut:
if (in_init)
print_stuff(bio_c_out, con, full_log);
do_ssl_shutdown(con);
SHUTDOWN(SSL_get_fd(con));
end:
if (con != NULL) {
if (prexit != 0)
print_stuff(bio_c_out, con, 1);
SSL_free(con);
}
#if !defined(OPENSSL_NO_NEXTPROTONEG)
OPENSSL_free(next_proto.data);
#endif
SSL_CTX_free(ctx);
X509_free(cert);
sk_X509_CRL_pop_free(crls, X509_CRL_free);
EVP_PKEY_free(key);
sk_X509_pop_free(chain, X509_free);
OPENSSL_free(pass);
#ifndef OPENSSL_NO_SRP
OPENSSL_free(srp_arg.srppassin);
#endif
OPENSSL_free(host);
OPENSSL_free(port);
X509_VERIFY_PARAM_free(vpm);
ssl_excert_free(exc);
sk_OPENSSL_STRING_free(ssl_args);
sk_OPENSSL_STRING_free(dane_tlsa_rrset);
SSL_CONF_CTX_free(cctx);
OPENSSL_clear_free(cbuf, BUFSIZZ);
OPENSSL_clear_free(sbuf, BUFSIZZ);
OPENSSL_clear_free(mbuf, BUFSIZZ);
BIO_free(bio_c_out);
bio_c_out = NULL;
BIO_free(bio_c_msg);
bio_c_msg = NULL;
return (ret);
}
static void print_stuff(BIO *bio, SSL *s, int full)
{
X509 *peer = NULL;
char buf[BUFSIZ];
STACK_OF(X509) *sk;
STACK_OF(X509_NAME) *sk2;
const SSL_CIPHER *c;
X509_NAME *xn;
int i;
#ifndef OPENSSL_NO_COMP
const COMP_METHOD *comp, *expansion;
#endif
unsigned char *exportedkeymat;
if (full) {
int got_a_chain = 0;
sk = SSL_get_peer_cert_chain(s);
if (sk != NULL) {
got_a_chain = 1;
BIO_printf(bio, "---\nCertificate chain\n");
for (i = 0; i < sk_X509_num(sk); i++) {
X509_NAME_oneline(X509_get_subject_name(sk_X509_value(sk, i)),
buf, sizeof buf);
BIO_printf(bio, "%2d s:%s\n", i, buf);
X509_NAME_oneline(X509_get_issuer_name(sk_X509_value(sk, i)),
buf, sizeof buf);
BIO_printf(bio, " i:%s\n", buf);
if (c_showcerts)
PEM_write_bio_X509(bio, sk_X509_value(sk, i));
}
}
BIO_printf(bio, "---\n");
peer = SSL_get_peer_certificate(s);
if (peer != NULL) {
BIO_printf(bio, "Server certificate\n");
/* Redundant if we showed the whole chain */
if (!(c_showcerts && got_a_chain))
PEM_write_bio_X509(bio, peer);
X509_NAME_oneline(X509_get_subject_name(peer), buf, sizeof buf);
BIO_printf(bio, "subject=%s\n", buf);
X509_NAME_oneline(X509_get_issuer_name(peer), buf, sizeof buf);
BIO_printf(bio, "issuer=%s\n", buf);
} else
BIO_printf(bio, "no peer certificate available\n");
sk2 = SSL_get_client_CA_list(s);
if ((sk2 != NULL) && (sk_X509_NAME_num(sk2) > 0)) {
BIO_printf(bio, "---\nAcceptable client certificate CA names\n");
for (i = 0; i < sk_X509_NAME_num(sk2); i++) {
xn = sk_X509_NAME_value(sk2, i);
X509_NAME_oneline(xn, buf, sizeof(buf));
BIO_write(bio, buf, strlen(buf));
BIO_write(bio, "\n", 1);
}
} else {
BIO_printf(bio, "---\nNo client certificate CA names sent\n");
}
ssl_print_sigalgs(bio, s);
ssl_print_tmp_key(bio, s);
BIO_printf(bio,
"---\nSSL handshake has read %"PRIu64" bytes and written %"PRIu64" bytes\n",
BIO_number_read(SSL_get_rbio(s)),
BIO_number_written(SSL_get_wbio(s)));
}
print_verify_detail(s, bio);
BIO_printf(bio, (SSL_session_reused(s) ? "---\nReused, " : "---\nNew, "));
c = SSL_get_current_cipher(s);
BIO_printf(bio, "%s, Cipher is %s\n",
SSL_CIPHER_get_version(c), SSL_CIPHER_get_name(c));
if (peer != NULL) {
EVP_PKEY *pktmp;
pktmp = X509_get0_pubkey(peer);
BIO_printf(bio, "Server public key is %d bit\n",
EVP_PKEY_bits(pktmp));
}
BIO_printf(bio, "Secure Renegotiation IS%s supported\n",
SSL_get_secure_renegotiation_support(s) ? "" : " NOT");
#ifndef OPENSSL_NO_COMP
comp = SSL_get_current_compression(s);
expansion = SSL_get_current_expansion(s);
BIO_printf(bio, "Compression: %s\n",
comp ? SSL_COMP_get_name(comp) : "NONE");
BIO_printf(bio, "Expansion: %s\n",
expansion ? SSL_COMP_get_name(expansion) : "NONE");
#endif
#ifdef SSL_DEBUG
{
/* Print out local port of connection: useful for debugging */
int sock;
struct sockaddr_in ladd;
socklen_t ladd_size = sizeof(ladd);
sock = SSL_get_fd(s);
getsockname(sock, (struct sockaddr *)&ladd, &ladd_size);
BIO_printf(bio_c_out, "LOCAL PORT is %u\n", ntohs(ladd.sin_port));
}
#endif
#if !defined(OPENSSL_NO_NEXTPROTONEG)
if (next_proto.status != -1) {
const unsigned char *proto;
unsigned int proto_len;
SSL_get0_next_proto_negotiated(s, &proto, &proto_len);
BIO_printf(bio, "Next protocol: (%d) ", next_proto.status);
BIO_write(bio, proto, proto_len);
BIO_write(bio, "\n", 1);
}
#endif
{
const unsigned char *proto;
unsigned int proto_len;
SSL_get0_alpn_selected(s, &proto, &proto_len);
if (proto_len > 0) {
BIO_printf(bio, "ALPN protocol: ");
BIO_write(bio, proto, proto_len);
BIO_write(bio, "\n", 1);
} else
BIO_printf(bio, "No ALPN negotiated\n");
}
#ifndef OPENSSL_NO_SRTP
{
SRTP_PROTECTION_PROFILE *srtp_profile =
SSL_get_selected_srtp_profile(s);
if (srtp_profile)
BIO_printf(bio, "SRTP Extension negotiated, profile=%s\n",
srtp_profile->name);
}
#endif
SSL_SESSION_print(bio, SSL_get_session(s));
if (keymatexportlabel != NULL) {
BIO_printf(bio, "Keying material exporter:\n");
BIO_printf(bio, " Label: '%s'\n", keymatexportlabel);
BIO_printf(bio, " Length: %i bytes\n", keymatexportlen);
exportedkeymat = app_malloc(keymatexportlen, "export key");
if (!SSL_export_keying_material(s, exportedkeymat,
keymatexportlen,
keymatexportlabel,
strlen(keymatexportlabel),
NULL, 0, 0)) {
BIO_printf(bio, " Error\n");
} else {
BIO_printf(bio, " Keying material: ");
for (i = 0; i < keymatexportlen; i++)
BIO_printf(bio, "%02X", exportedkeymat[i]);
BIO_printf(bio, "\n");
}
OPENSSL_free(exportedkeymat);
}
BIO_printf(bio, "---\n");
X509_free(peer);
/* flush, or debugging output gets mixed with http response */
(void)BIO_flush(bio);
}
static int ocsp_resp_cb(SSL *s, void *arg)
{
const unsigned char *p;
int len;
OCSP_RESPONSE *rsp;
len = SSL_get_tlsext_status_ocsp_resp(s, &p);
BIO_puts(arg, "OCSP response: ");
if (!p) {
BIO_puts(arg, "no response sent\n");
return 1;
}
rsp = d2i_OCSP_RESPONSE(NULL, &p, len);
if (!rsp) {
BIO_puts(arg, "response parse error\n");
BIO_dump_indent(arg, (char *)p, len, 4);
return 0;
}
BIO_puts(arg, "\n======================================\n");
OCSP_RESPONSE_print(arg, rsp, 0);
BIO_puts(arg, "======================================\n");
OCSP_RESPONSE_free(rsp);
return 1;
}