openssl/crypto/ec/asm/ecp_nistz256-sparcv9.pl
Josh Soref 46f4e1bec5 Many spelling fixes/typo's corrected.
Around 138 distinct errors found and fixed; thanks!

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3459)
2017-11-11 19:03:10 -05:00

3061 lines
76 KiB
Perl
Executable file
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#! /usr/bin/env perl
# Copyright 2015-2016 The OpenSSL Project Authors. All Rights Reserved.
#
# Licensed under the OpenSSL license (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
# in the file LICENSE in the source distribution or at
# https://www.openssl.org/source/license.html
# ====================================================================
# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
# project. The module is, however, dual licensed under OpenSSL and
# CRYPTOGAMS licenses depending on where you obtain it. For further
# details see http://www.openssl.org/~appro/cryptogams/.
# ====================================================================
#
# ECP_NISTZ256 module for SPARCv9.
#
# February 2015.
#
# Original ECP_NISTZ256 submission targeting x86_64 is detailed in
# http://eprint.iacr.org/2013/816. In the process of adaptation
# original .c module was made 32-bit savvy in order to make this
# implementation possible.
#
# with/without -DECP_NISTZ256_ASM
# UltraSPARC III +12-18%
# SPARC T4 +99-550% (+66-150% on 32-bit Solaris)
#
# Ranges denote minimum and maximum improvement coefficients depending
# on benchmark. Lower coefficients are for ECDSA sign, server-side
# operation. Keep in mind that +200% means 3x improvement.
$output = pop;
open STDOUT,">$output";
$code.=<<___;
#include "sparc_arch.h"
#define LOCALS (STACK_BIAS+STACK_FRAME)
#ifdef __arch64__
.register %g2,#scratch
.register %g3,#scratch
# define STACK64_FRAME STACK_FRAME
# define LOCALS64 LOCALS
#else
# define STACK64_FRAME (2047+192)
# define LOCALS64 STACK64_FRAME
#endif
.section ".text",#alloc,#execinstr
___
########################################################################
# Convert ecp_nistz256_table.c to layout expected by ecp_nistz_gather_w7
#
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
open TABLE,"<ecp_nistz256_table.c" or
open TABLE,"<${dir}../ecp_nistz256_table.c" or
die "failed to open ecp_nistz256_table.c:",$!;
use integer;
foreach(<TABLE>) {
s/TOBN\(\s*(0x[0-9a-f]+),\s*(0x[0-9a-f]+)\s*\)/push @arr,hex($2),hex($1)/geo;
}
close TABLE;
# See ecp_nistz256_table.c for explanation for why it's 64*16*37.
# 64*16*37-1 is because $#arr returns last valid index or @arr, not
# amount of elements.
die "insane number of elements" if ($#arr != 64*16*37-1);
$code.=<<___;
.globl ecp_nistz256_precomputed
.align 4096
ecp_nistz256_precomputed:
___
########################################################################
# this conversion smashes P256_POINT_AFFINE by individual bytes with
# 64 byte interval, similar to
# 1111222233334444
# 1234123412341234
for(1..37) {
@tbl = splice(@arr,0,64*16);
for($i=0;$i<64;$i++) {
undef @line;
for($j=0;$j<64;$j++) {
push @line,(@tbl[$j*16+$i/4]>>(($i%4)*8))&0xff;
}
$code.=".byte\t";
$code.=join(',',map { sprintf "0x%02x",$_} @line);
$code.="\n";
}
}
{{{
my ($rp,$ap,$bp)=map("%i$_",(0..2));
my @acc=map("%l$_",(0..7));
my ($t0,$t1,$t2,$t3,$t4,$t5,$t6,$t7)=(map("%o$_",(0..5)),"%g4","%g5");
my ($bi,$a0,$mask,$carry)=(map("%i$_",(3..5)),"%g1");
my ($rp_real,$ap_real)=("%g2","%g3");
$code.=<<___;
.type ecp_nistz256_precomputed,#object
.size ecp_nistz256_precomputed,.-ecp_nistz256_precomputed
.align 64
.LRR: ! 2^512 mod P precomputed for NIST P256 polynomial
.long 0x00000003, 0x00000000, 0xffffffff, 0xfffffffb
.long 0xfffffffe, 0xffffffff, 0xfffffffd, 0x00000004
.Lone:
.long 1,0,0,0,0,0,0,0
.asciz "ECP_NISTZ256 for SPARCv9, CRYPTOGAMS by <appro\@openssl.org>"
! void ecp_nistz256_to_mont(BN_ULONG %i0[8],const BN_ULONG %i1[8]);
.globl ecp_nistz256_to_mont
.align 64
ecp_nistz256_to_mont:
save %sp,-STACK_FRAME,%sp
nop
1: call .+8
add %o7,.LRR-1b,$bp
call __ecp_nistz256_mul_mont
nop
ret
restore
.type ecp_nistz256_to_mont,#function
.size ecp_nistz256_to_mont,.-ecp_nistz256_to_mont
! void ecp_nistz256_from_mont(BN_ULONG %i0[8],const BN_ULONG %i1[8]);
.globl ecp_nistz256_from_mont
.align 32
ecp_nistz256_from_mont:
save %sp,-STACK_FRAME,%sp
nop
1: call .+8
add %o7,.Lone-1b,$bp
call __ecp_nistz256_mul_mont
nop
ret
restore
.type ecp_nistz256_from_mont,#function
.size ecp_nistz256_from_mont,.-ecp_nistz256_from_mont
! void ecp_nistz256_mul_mont(BN_ULONG %i0[8],const BN_ULONG %i1[8],
! const BN_ULONG %i2[8]);
.globl ecp_nistz256_mul_mont
.align 32
ecp_nistz256_mul_mont:
save %sp,-STACK_FRAME,%sp
nop
call __ecp_nistz256_mul_mont
nop
ret
restore
.type ecp_nistz256_mul_mont,#function
.size ecp_nistz256_mul_mont,.-ecp_nistz256_mul_mont
! void ecp_nistz256_sqr_mont(BN_ULONG %i0[8],const BN_ULONG %i2[8]);
.globl ecp_nistz256_sqr_mont
.align 32
ecp_nistz256_sqr_mont:
save %sp,-STACK_FRAME,%sp
mov $ap,$bp
call __ecp_nistz256_mul_mont
nop
ret
restore
.type ecp_nistz256_sqr_mont,#function
.size ecp_nistz256_sqr_mont,.-ecp_nistz256_sqr_mont
___
########################################################################
# Special thing to keep in mind is that $t0-$t7 hold 64-bit values,
# while all others are meant to keep 32. "Meant to" means that additions
# to @acc[0-7] do "contaminate" upper bits, but they are cleared before
# they can affect outcome (follow 'and' with $mask). Also keep in mind
# that addition with carry is addition with 32-bit carry, even though
# CPU is 64-bit. [Addition with 64-bit carry was introduced in T3, see
# below for VIS3 code paths.]
$code.=<<___;
.align 32
__ecp_nistz256_mul_mont:
ld [$bp+0],$bi ! b[0]
mov -1,$mask
ld [$ap+0],$a0
srl $mask,0,$mask ! 0xffffffff
ld [$ap+4],$t1
ld [$ap+8],$t2
ld [$ap+12],$t3
ld [$ap+16],$t4
ld [$ap+20],$t5
ld [$ap+24],$t6
ld [$ap+28],$t7
mulx $a0,$bi,$t0 ! a[0-7]*b[0], 64-bit results
mulx $t1,$bi,$t1
mulx $t2,$bi,$t2
mulx $t3,$bi,$t3
mulx $t4,$bi,$t4
mulx $t5,$bi,$t5
mulx $t6,$bi,$t6
mulx $t7,$bi,$t7
srlx $t0,32,@acc[1] ! extract high parts
srlx $t1,32,@acc[2]
srlx $t2,32,@acc[3]
srlx $t3,32,@acc[4]
srlx $t4,32,@acc[5]
srlx $t5,32,@acc[6]
srlx $t6,32,@acc[7]
srlx $t7,32,@acc[0] ! "@acc[8]"
mov 0,$carry
___
for($i=1;$i<8;$i++) {
$code.=<<___;
addcc @acc[1],$t1,@acc[1] ! accumulate high parts
ld [$bp+4*$i],$bi ! b[$i]
ld [$ap+4],$t1 ! re-load a[1-7]
addccc @acc[2],$t2,@acc[2]
addccc @acc[3],$t3,@acc[3]
ld [$ap+8],$t2
ld [$ap+12],$t3
addccc @acc[4],$t4,@acc[4]
addccc @acc[5],$t5,@acc[5]
ld [$ap+16],$t4
ld [$ap+20],$t5
addccc @acc[6],$t6,@acc[6]
addccc @acc[7],$t7,@acc[7]
ld [$ap+24],$t6
ld [$ap+28],$t7
addccc @acc[0],$carry,@acc[0] ! "@acc[8]"
addc %g0,%g0,$carry
___
# Reduction iteration is normally performed by accumulating
# result of multiplication of modulus by "magic" digit [and
# omitting least significant word, which is guaranteed to
# be 0], but thanks to special form of modulus and "magic"
# digit being equal to least significant word, it can be
# performed with additions and subtractions alone. Indeed:
#
# ffff.0001.0000.0000.0000.ffff.ffff.ffff
# * abcd
# + xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.abcd
#
# Now observing that ff..ff*x = (2^n-1)*x = 2^n*x-x, we
# rewrite above as:
#
# xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.abcd
# + abcd.0000.abcd.0000.0000.abcd.0000.0000.0000
# - abcd.0000.0000.0000.0000.0000.0000.abcd
#
# or marking redundant operations:
#
# xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.----
# + abcd.0000.abcd.0000.0000.abcd.----.----.----
# - abcd.----.----.----.----.----.----.----
$code.=<<___;
! multiplication-less reduction
addcc @acc[3],$t0,@acc[3] ! r[3]+=r[0]
addccc @acc[4],%g0,@acc[4] ! r[4]+=0
and @acc[1],$mask,@acc[1]
and @acc[2],$mask,@acc[2]
addccc @acc[5],%g0,@acc[5] ! r[5]+=0
addccc @acc[6],$t0,@acc[6] ! r[6]+=r[0]
and @acc[3],$mask,@acc[3]
and @acc[4],$mask,@acc[4]
addccc @acc[7],%g0,@acc[7] ! r[7]+=0
addccc @acc[0],$t0,@acc[0] ! r[8]+=r[0] "@acc[8]"
and @acc[5],$mask,@acc[5]
and @acc[6],$mask,@acc[6]
addc $carry,%g0,$carry ! top-most carry
subcc @acc[7],$t0,@acc[7] ! r[7]-=r[0]
subccc @acc[0],%g0,@acc[0] ! r[8]-=0 "@acc[8]"
subc $carry,%g0,$carry ! top-most carry
and @acc[7],$mask,@acc[7]
and @acc[0],$mask,@acc[0] ! "@acc[8]"
___
push(@acc,shift(@acc)); # rotate registers to "omit" acc[0]
$code.=<<___;
mulx $a0,$bi,$t0 ! a[0-7]*b[$i], 64-bit results
mulx $t1,$bi,$t1
mulx $t2,$bi,$t2
mulx $t3,$bi,$t3
mulx $t4,$bi,$t4
mulx $t5,$bi,$t5
mulx $t6,$bi,$t6
mulx $t7,$bi,$t7
add @acc[0],$t0,$t0 ! accumulate low parts, can't overflow
add @acc[1],$t1,$t1
srlx $t0,32,@acc[1] ! extract high parts
add @acc[2],$t2,$t2
srlx $t1,32,@acc[2]
add @acc[3],$t3,$t3
srlx $t2,32,@acc[3]
add @acc[4],$t4,$t4
srlx $t3,32,@acc[4]
add @acc[5],$t5,$t5
srlx $t4,32,@acc[5]
add @acc[6],$t6,$t6
srlx $t5,32,@acc[6]
add @acc[7],$t7,$t7
srlx $t6,32,@acc[7]
srlx $t7,32,@acc[0] ! "@acc[8]"
___
}
$code.=<<___;
addcc @acc[1],$t1,@acc[1] ! accumulate high parts
addccc @acc[2],$t2,@acc[2]
addccc @acc[3],$t3,@acc[3]
addccc @acc[4],$t4,@acc[4]
addccc @acc[5],$t5,@acc[5]
addccc @acc[6],$t6,@acc[6]
addccc @acc[7],$t7,@acc[7]
addccc @acc[0],$carry,@acc[0] ! "@acc[8]"
addc %g0,%g0,$carry
addcc @acc[3],$t0,@acc[3] ! multiplication-less reduction
addccc @acc[4],%g0,@acc[4]
addccc @acc[5],%g0,@acc[5]
addccc @acc[6],$t0,@acc[6]
addccc @acc[7],%g0,@acc[7]
addccc @acc[0],$t0,@acc[0] ! "@acc[8]"
addc $carry,%g0,$carry
subcc @acc[7],$t0,@acc[7]
subccc @acc[0],%g0,@acc[0] ! "@acc[8]"
subc $carry,%g0,$carry ! top-most carry
___
push(@acc,shift(@acc)); # rotate registers to omit acc[0]
$code.=<<___;
! Final step is "if result > mod, subtract mod", but we do it
! "other way around", namely subtract modulus from result
! and if it borrowed, add modulus back.
subcc @acc[0],-1,@acc[0] ! subtract modulus
subccc @acc[1],-1,@acc[1]
subccc @acc[2],-1,@acc[2]
subccc @acc[3],0,@acc[3]
subccc @acc[4],0,@acc[4]
subccc @acc[5],0,@acc[5]
subccc @acc[6],1,@acc[6]
subccc @acc[7],-1,@acc[7]
subc $carry,0,$carry ! broadcast borrow bit
! Note that because mod has special form, i.e. consists of
! 0xffffffff, 1 and 0s, we can conditionally synthesize it by
! using value of broadcasted borrow and the borrow bit itself.
! To minimize dependency chain we first broadcast and then
! extract the bit by negating (follow $bi).
addcc @acc[0],$carry,@acc[0] ! add modulus or zero
addccc @acc[1],$carry,@acc[1]
neg $carry,$bi
st @acc[0],[$rp]
addccc @acc[2],$carry,@acc[2]
st @acc[1],[$rp+4]
addccc @acc[3],0,@acc[3]
st @acc[2],[$rp+8]
addccc @acc[4],0,@acc[4]
st @acc[3],[$rp+12]
addccc @acc[5],0,@acc[5]
st @acc[4],[$rp+16]
addccc @acc[6],$bi,@acc[6]
st @acc[5],[$rp+20]
addc @acc[7],$carry,@acc[7]
st @acc[6],[$rp+24]
retl
st @acc[7],[$rp+28]
.type __ecp_nistz256_mul_mont,#function
.size __ecp_nistz256_mul_mont,.-__ecp_nistz256_mul_mont
! void ecp_nistz256_add(BN_ULONG %i0[8],const BN_ULONG %i1[8],
! const BN_ULONG %i2[8]);
.globl ecp_nistz256_add
.align 32
ecp_nistz256_add:
save %sp,-STACK_FRAME,%sp
ld [$ap],@acc[0]
ld [$ap+4],@acc[1]
ld [$ap+8],@acc[2]
ld [$ap+12],@acc[3]
ld [$ap+16],@acc[4]
ld [$ap+20],@acc[5]
ld [$ap+24],@acc[6]
call __ecp_nistz256_add
ld [$ap+28],@acc[7]
ret
restore
.type ecp_nistz256_add,#function
.size ecp_nistz256_add,.-ecp_nistz256_add
.align 32
__ecp_nistz256_add:
ld [$bp+0],$t0 ! b[0]
ld [$bp+4],$t1
ld [$bp+8],$t2
ld [$bp+12],$t3
addcc @acc[0],$t0,@acc[0]
ld [$bp+16],$t4
ld [$bp+20],$t5
addccc @acc[1],$t1,@acc[1]
ld [$bp+24],$t6
ld [$bp+28],$t7
addccc @acc[2],$t2,@acc[2]
addccc @acc[3],$t3,@acc[3]
addccc @acc[4],$t4,@acc[4]
addccc @acc[5],$t5,@acc[5]
addccc @acc[6],$t6,@acc[6]
addccc @acc[7],$t7,@acc[7]
addc %g0,%g0,$carry
.Lreduce_by_sub:
! if a+b >= modulus, subtract modulus.
!
! But since comparison implies subtraction, we subtract
! modulus and then add it back if subtraction borrowed.
subcc @acc[0],-1,@acc[0]
subccc @acc[1],-1,@acc[1]
subccc @acc[2],-1,@acc[2]
subccc @acc[3], 0,@acc[3]
subccc @acc[4], 0,@acc[4]
subccc @acc[5], 0,@acc[5]
subccc @acc[6], 1,@acc[6]
subccc @acc[7],-1,@acc[7]
subc $carry,0,$carry
! Note that because mod has special form, i.e. consists of
! 0xffffffff, 1 and 0s, we can conditionally synthesize it by
! using value of borrow and its negative.
addcc @acc[0],$carry,@acc[0] ! add synthesized modulus
addccc @acc[1],$carry,@acc[1]
neg $carry,$bi
st @acc[0],[$rp]
addccc @acc[2],$carry,@acc[2]
st @acc[1],[$rp+4]
addccc @acc[3],0,@acc[3]
st @acc[2],[$rp+8]
addccc @acc[4],0,@acc[4]
st @acc[3],[$rp+12]
addccc @acc[5],0,@acc[5]
st @acc[4],[$rp+16]
addccc @acc[6],$bi,@acc[6]
st @acc[5],[$rp+20]
addc @acc[7],$carry,@acc[7]
st @acc[6],[$rp+24]
retl
st @acc[7],[$rp+28]
.type __ecp_nistz256_add,#function
.size __ecp_nistz256_add,.-__ecp_nistz256_add
! void ecp_nistz256_mul_by_2(BN_ULONG %i0[8],const BN_ULONG %i1[8]);
.globl ecp_nistz256_mul_by_2
.align 32
ecp_nistz256_mul_by_2:
save %sp,-STACK_FRAME,%sp
ld [$ap],@acc[0]
ld [$ap+4],@acc[1]
ld [$ap+8],@acc[2]
ld [$ap+12],@acc[3]
ld [$ap+16],@acc[4]
ld [$ap+20],@acc[5]
ld [$ap+24],@acc[6]
call __ecp_nistz256_mul_by_2
ld [$ap+28],@acc[7]
ret
restore
.type ecp_nistz256_mul_by_2,#function
.size ecp_nistz256_mul_by_2,.-ecp_nistz256_mul_by_2
.align 32
__ecp_nistz256_mul_by_2:
addcc @acc[0],@acc[0],@acc[0] ! a+a=2*a
addccc @acc[1],@acc[1],@acc[1]
addccc @acc[2],@acc[2],@acc[2]
addccc @acc[3],@acc[3],@acc[3]
addccc @acc[4],@acc[4],@acc[4]
addccc @acc[5],@acc[5],@acc[5]
addccc @acc[6],@acc[6],@acc[6]
addccc @acc[7],@acc[7],@acc[7]
b .Lreduce_by_sub
addc %g0,%g0,$carry
.type __ecp_nistz256_mul_by_2,#function
.size __ecp_nistz256_mul_by_2,.-__ecp_nistz256_mul_by_2
! void ecp_nistz256_mul_by_3(BN_ULONG %i0[8],const BN_ULONG %i1[8]);
.globl ecp_nistz256_mul_by_3
.align 32
ecp_nistz256_mul_by_3:
save %sp,-STACK_FRAME,%sp
ld [$ap],@acc[0]
ld [$ap+4],@acc[1]
ld [$ap+8],@acc[2]
ld [$ap+12],@acc[3]
ld [$ap+16],@acc[4]
ld [$ap+20],@acc[5]
ld [$ap+24],@acc[6]
call __ecp_nistz256_mul_by_3
ld [$ap+28],@acc[7]
ret
restore
.type ecp_nistz256_mul_by_3,#function
.size ecp_nistz256_mul_by_3,.-ecp_nistz256_mul_by_3
.align 32
__ecp_nistz256_mul_by_3:
addcc @acc[0],@acc[0],$t0 ! a+a=2*a
addccc @acc[1],@acc[1],$t1
addccc @acc[2],@acc[2],$t2
addccc @acc[3],@acc[3],$t3
addccc @acc[4],@acc[4],$t4
addccc @acc[5],@acc[5],$t5
addccc @acc[6],@acc[6],$t6
addccc @acc[7],@acc[7],$t7
addc %g0,%g0,$carry
subcc $t0,-1,$t0 ! .Lreduce_by_sub but without stores
subccc $t1,-1,$t1
subccc $t2,-1,$t2
subccc $t3, 0,$t3
subccc $t4, 0,$t4
subccc $t5, 0,$t5
subccc $t6, 1,$t6
subccc $t7,-1,$t7
subc $carry,0,$carry
addcc $t0,$carry,$t0 ! add synthesized modulus
addccc $t1,$carry,$t1
neg $carry,$bi
addccc $t2,$carry,$t2
addccc $t3,0,$t3
addccc $t4,0,$t4
addccc $t5,0,$t5
addccc $t6,$bi,$t6
addc $t7,$carry,$t7
addcc $t0,@acc[0],@acc[0] ! 2*a+a=3*a
addccc $t1,@acc[1],@acc[1]
addccc $t2,@acc[2],@acc[2]
addccc $t3,@acc[3],@acc[3]
addccc $t4,@acc[4],@acc[4]
addccc $t5,@acc[5],@acc[5]
addccc $t6,@acc[6],@acc[6]
addccc $t7,@acc[7],@acc[7]
b .Lreduce_by_sub
addc %g0,%g0,$carry
.type __ecp_nistz256_mul_by_3,#function
.size __ecp_nistz256_mul_by_3,.-__ecp_nistz256_mul_by_3
! void ecp_nistz256_sub(BN_ULONG %i0[8],const BN_ULONG %i1[8],
! const BN_ULONG %i2[8]);
.globl ecp_nistz256_sub
.align 32
ecp_nistz256_sub:
save %sp,-STACK_FRAME,%sp
ld [$ap],@acc[0]
ld [$ap+4],@acc[1]
ld [$ap+8],@acc[2]
ld [$ap+12],@acc[3]
ld [$ap+16],@acc[4]
ld [$ap+20],@acc[5]
ld [$ap+24],@acc[6]
call __ecp_nistz256_sub_from
ld [$ap+28],@acc[7]
ret
restore
.type ecp_nistz256_sub,#function
.size ecp_nistz256_sub,.-ecp_nistz256_sub
! void ecp_nistz256_neg(BN_ULONG %i0[8],const BN_ULONG %i1[8]);
.globl ecp_nistz256_neg
.align 32
ecp_nistz256_neg:
save %sp,-STACK_FRAME,%sp
mov $ap,$bp
mov 0,@acc[0]
mov 0,@acc[1]
mov 0,@acc[2]
mov 0,@acc[3]
mov 0,@acc[4]
mov 0,@acc[5]
mov 0,@acc[6]
call __ecp_nistz256_sub_from
mov 0,@acc[7]
ret
restore
.type ecp_nistz256_neg,#function
.size ecp_nistz256_neg,.-ecp_nistz256_neg
.align 32
__ecp_nistz256_sub_from:
ld [$bp+0],$t0 ! b[0]
ld [$bp+4],$t1
ld [$bp+8],$t2
ld [$bp+12],$t3
subcc @acc[0],$t0,@acc[0]
ld [$bp+16],$t4
ld [$bp+20],$t5
subccc @acc[1],$t1,@acc[1]
subccc @acc[2],$t2,@acc[2]
ld [$bp+24],$t6
ld [$bp+28],$t7
subccc @acc[3],$t3,@acc[3]
subccc @acc[4],$t4,@acc[4]
subccc @acc[5],$t5,@acc[5]
subccc @acc[6],$t6,@acc[6]
subccc @acc[7],$t7,@acc[7]
subc %g0,%g0,$carry ! broadcast borrow bit
.Lreduce_by_add:
! if a-b borrows, add modulus.
!
! Note that because mod has special form, i.e. consists of
! 0xffffffff, 1 and 0s, we can conditionally synthesize it by
! using value of broadcasted borrow and the borrow bit itself.
! To minimize dependency chain we first broadcast and then
! extract the bit by negating (follow $bi).
addcc @acc[0],$carry,@acc[0] ! add synthesized modulus
addccc @acc[1],$carry,@acc[1]
neg $carry,$bi
st @acc[0],[$rp]
addccc @acc[2],$carry,@acc[2]
st @acc[1],[$rp+4]
addccc @acc[3],0,@acc[3]
st @acc[2],[$rp+8]
addccc @acc[4],0,@acc[4]
st @acc[3],[$rp+12]
addccc @acc[5],0,@acc[5]
st @acc[4],[$rp+16]
addccc @acc[6],$bi,@acc[6]
st @acc[5],[$rp+20]
addc @acc[7],$carry,@acc[7]
st @acc[6],[$rp+24]
retl
st @acc[7],[$rp+28]
.type __ecp_nistz256_sub_from,#function
.size __ecp_nistz256_sub_from,.-__ecp_nistz256_sub_from
.align 32
__ecp_nistz256_sub_morf:
ld [$bp+0],$t0 ! b[0]
ld [$bp+4],$t1
ld [$bp+8],$t2
ld [$bp+12],$t3
subcc $t0,@acc[0],@acc[0]
ld [$bp+16],$t4
ld [$bp+20],$t5
subccc $t1,@acc[1],@acc[1]
subccc $t2,@acc[2],@acc[2]
ld [$bp+24],$t6
ld [$bp+28],$t7
subccc $t3,@acc[3],@acc[3]
subccc $t4,@acc[4],@acc[4]
subccc $t5,@acc[5],@acc[5]
subccc $t6,@acc[6],@acc[6]
subccc $t7,@acc[7],@acc[7]
b .Lreduce_by_add
subc %g0,%g0,$carry ! broadcast borrow bit
.type __ecp_nistz256_sub_morf,#function
.size __ecp_nistz256_sub_morf,.-__ecp_nistz256_sub_morf
! void ecp_nistz256_div_by_2(BN_ULONG %i0[8],const BN_ULONG %i1[8]);
.globl ecp_nistz256_div_by_2
.align 32
ecp_nistz256_div_by_2:
save %sp,-STACK_FRAME,%sp
ld [$ap],@acc[0]
ld [$ap+4],@acc[1]
ld [$ap+8],@acc[2]
ld [$ap+12],@acc[3]
ld [$ap+16],@acc[4]
ld [$ap+20],@acc[5]
ld [$ap+24],@acc[6]
call __ecp_nistz256_div_by_2
ld [$ap+28],@acc[7]
ret
restore
.type ecp_nistz256_div_by_2,#function
.size ecp_nistz256_div_by_2,.-ecp_nistz256_div_by_2
.align 32
__ecp_nistz256_div_by_2:
! ret = (a is odd ? a+mod : a) >> 1
and @acc[0],1,$bi
neg $bi,$carry
addcc @acc[0],$carry,@acc[0]
addccc @acc[1],$carry,@acc[1]
addccc @acc[2],$carry,@acc[2]
addccc @acc[3],0,@acc[3]
addccc @acc[4],0,@acc[4]
addccc @acc[5],0,@acc[5]
addccc @acc[6],$bi,@acc[6]
addccc @acc[7],$carry,@acc[7]
addc %g0,%g0,$carry
! ret >>= 1
srl @acc[0],1,@acc[0]
sll @acc[1],31,$t0
srl @acc[1],1,@acc[1]
or @acc[0],$t0,@acc[0]
sll @acc[2],31,$t1
srl @acc[2],1,@acc[2]
or @acc[1],$t1,@acc[1]
sll @acc[3],31,$t2
st @acc[0],[$rp]
srl @acc[3],1,@acc[3]
or @acc[2],$t2,@acc[2]
sll @acc[4],31,$t3
st @acc[1],[$rp+4]
srl @acc[4],1,@acc[4]
or @acc[3],$t3,@acc[3]
sll @acc[5],31,$t4
st @acc[2],[$rp+8]
srl @acc[5],1,@acc[5]
or @acc[4],$t4,@acc[4]
sll @acc[6],31,$t5
st @acc[3],[$rp+12]
srl @acc[6],1,@acc[6]
or @acc[5],$t5,@acc[5]
sll @acc[7],31,$t6
st @acc[4],[$rp+16]
srl @acc[7],1,@acc[7]
or @acc[6],$t6,@acc[6]
sll $carry,31,$t7
st @acc[5],[$rp+20]
or @acc[7],$t7,@acc[7]
st @acc[6],[$rp+24]
retl
st @acc[7],[$rp+28]
.type __ecp_nistz256_div_by_2,#function
.size __ecp_nistz256_div_by_2,.-__ecp_nistz256_div_by_2
___
########################################################################
# following subroutines are "literal" implementation of those found in
# ecp_nistz256.c
#
########################################################################
# void ecp_nistz256_point_double(P256_POINT *out,const P256_POINT *inp);
#
{
my ($S,$M,$Zsqr,$tmp0)=map(32*$_,(0..3));
# above map() describes stack layout with 4 temporary
# 256-bit vectors on top.
$code.=<<___;
#ifdef __PIC__
SPARC_PIC_THUNK(%g1)
#endif
.globl ecp_nistz256_point_double
.align 32
ecp_nistz256_point_double:
SPARC_LOAD_ADDRESS_LEAF(OPENSSL_sparcv9cap_P,%g1,%g5)
ld [%g1],%g1 ! OPENSSL_sparcv9cap_P[0]
and %g1,(SPARCV9_VIS3|SPARCV9_64BIT_STACK),%g1
cmp %g1,(SPARCV9_VIS3|SPARCV9_64BIT_STACK)
be ecp_nistz256_point_double_vis3
nop
save %sp,-STACK_FRAME-32*4,%sp
mov $rp,$rp_real
mov $ap,$ap_real
.Lpoint_double_shortcut:
ld [$ap+32],@acc[0]
ld [$ap+32+4],@acc[1]
ld [$ap+32+8],@acc[2]
ld [$ap+32+12],@acc[3]
ld [$ap+32+16],@acc[4]
ld [$ap+32+20],@acc[5]
ld [$ap+32+24],@acc[6]
ld [$ap+32+28],@acc[7]
call __ecp_nistz256_mul_by_2 ! p256_mul_by_2(S, in_y);
add %sp,LOCALS+$S,$rp
add $ap_real,64,$bp
add $ap_real,64,$ap
call __ecp_nistz256_mul_mont ! p256_sqr_mont(Zsqr, in_z);
add %sp,LOCALS+$Zsqr,$rp
add $ap_real,0,$bp
call __ecp_nistz256_add ! p256_add(M, Zsqr, in_x);
add %sp,LOCALS+$M,$rp
add %sp,LOCALS+$S,$bp
add %sp,LOCALS+$S,$ap
call __ecp_nistz256_mul_mont ! p256_sqr_mont(S, S);
add %sp,LOCALS+$S,$rp
ld [$ap_real],@acc[0]
add %sp,LOCALS+$Zsqr,$bp
ld [$ap_real+4],@acc[1]
ld [$ap_real+8],@acc[2]
ld [$ap_real+12],@acc[3]
ld [$ap_real+16],@acc[4]
ld [$ap_real+20],@acc[5]
ld [$ap_real+24],@acc[6]
ld [$ap_real+28],@acc[7]
call __ecp_nistz256_sub_from ! p256_sub(Zsqr, in_x, Zsqr);
add %sp,LOCALS+$Zsqr,$rp
add $ap_real,32,$bp
add $ap_real,64,$ap
call __ecp_nistz256_mul_mont ! p256_mul_mont(tmp0, in_z, in_y);
add %sp,LOCALS+$tmp0,$rp
call __ecp_nistz256_mul_by_2 ! p256_mul_by_2(res_z, tmp0);
add $rp_real,64,$rp
add %sp,LOCALS+$Zsqr,$bp
add %sp,LOCALS+$M,$ap
call __ecp_nistz256_mul_mont ! p256_mul_mont(M, M, Zsqr);
add %sp,LOCALS+$M,$rp
call __ecp_nistz256_mul_by_3 ! p256_mul_by_3(M, M);
add %sp,LOCALS+$M,$rp
add %sp,LOCALS+$S,$bp
add %sp,LOCALS+$S,$ap
call __ecp_nistz256_mul_mont ! p256_sqr_mont(tmp0, S);
add %sp,LOCALS+$tmp0,$rp
call __ecp_nistz256_div_by_2 ! p256_div_by_2(res_y, tmp0);
add $rp_real,32,$rp
add $ap_real,0,$bp
add %sp,LOCALS+$S,$ap
call __ecp_nistz256_mul_mont ! p256_mul_mont(S, S, in_x);
add %sp,LOCALS+$S,$rp
call __ecp_nistz256_mul_by_2 ! p256_mul_by_2(tmp0, S);
add %sp,LOCALS+$tmp0,$rp
add %sp,LOCALS+$M,$bp
add %sp,LOCALS+$M,$ap
call __ecp_nistz256_mul_mont ! p256_sqr_mont(res_x, M);
add $rp_real,0,$rp
add %sp,LOCALS+$tmp0,$bp
call __ecp_nistz256_sub_from ! p256_sub(res_x, res_x, tmp0);
add $rp_real,0,$rp
add %sp,LOCALS+$S,$bp
call __ecp_nistz256_sub_morf ! p256_sub(S, S, res_x);
add %sp,LOCALS+$S,$rp
add %sp,LOCALS+$M,$bp
add %sp,LOCALS+$S,$ap
call __ecp_nistz256_mul_mont ! p256_mul_mont(S, S, M);
add %sp,LOCALS+$S,$rp
add $rp_real,32,$bp
call __ecp_nistz256_sub_from ! p256_sub(res_y, S, res_y);
add $rp_real,32,$rp
ret
restore
.type ecp_nistz256_point_double,#function
.size ecp_nistz256_point_double,.-ecp_nistz256_point_double
___
}
########################################################################
# void ecp_nistz256_point_add(P256_POINT *out,const P256_POINT *in1,
# const P256_POINT *in2);
{
my ($res_x,$res_y,$res_z,
$H,$Hsqr,$R,$Rsqr,$Hcub,
$U1,$U2,$S1,$S2)=map(32*$_,(0..11));
my ($Z1sqr, $Z2sqr) = ($Hsqr, $Rsqr);
# above map() describes stack layout with 12 temporary
# 256-bit vectors on top. Then we reserve some space for
# !in1infty, !in2infty, result of check for zero and return pointer.
my $bp_real=$rp_real;
$code.=<<___;
.globl ecp_nistz256_point_add
.align 32
ecp_nistz256_point_add:
SPARC_LOAD_ADDRESS_LEAF(OPENSSL_sparcv9cap_P,%g1,%g5)
ld [%g1],%g1 ! OPENSSL_sparcv9cap_P[0]
and %g1,(SPARCV9_VIS3|SPARCV9_64BIT_STACK),%g1
cmp %g1,(SPARCV9_VIS3|SPARCV9_64BIT_STACK)
be ecp_nistz256_point_add_vis3
nop
save %sp,-STACK_FRAME-32*12-32,%sp
stx $rp,[%fp+STACK_BIAS-8] ! off-load $rp
mov $ap,$ap_real
mov $bp,$bp_real
ld [$bp+64],$t0 ! in2_z
ld [$bp+64+4],$t1
ld [$bp+64+8],$t2
ld [$bp+64+12],$t3
ld [$bp+64+16],$t4
ld [$bp+64+20],$t5
ld [$bp+64+24],$t6
ld [$bp+64+28],$t7
or $t1,$t0,$t0
or $t3,$t2,$t2
or $t5,$t4,$t4
or $t7,$t6,$t6
or $t2,$t0,$t0
or $t6,$t4,$t4
or $t4,$t0,$t0 ! !in2infty
movrnz $t0,-1,$t0
st $t0,[%fp+STACK_BIAS-12]
ld [$ap+64],$t0 ! in1_z
ld [$ap+64+4],$t1
ld [$ap+64+8],$t2
ld [$ap+64+12],$t3
ld [$ap+64+16],$t4
ld [$ap+64+20],$t5
ld [$ap+64+24],$t6
ld [$ap+64+28],$t7
or $t1,$t0,$t0
or $t3,$t2,$t2
or $t5,$t4,$t4
or $t7,$t6,$t6
or $t2,$t0,$t0
or $t6,$t4,$t4
or $t4,$t0,$t0 ! !in1infty
movrnz $t0,-1,$t0
st $t0,[%fp+STACK_BIAS-16]
add $bp_real,64,$bp
add $bp_real,64,$ap
call __ecp_nistz256_mul_mont ! p256_sqr_mont(Z2sqr, in2_z);
add %sp,LOCALS+$Z2sqr,$rp
add $ap_real,64,$bp
add $ap_real,64,$ap
call __ecp_nistz256_mul_mont ! p256_sqr_mont(Z1sqr, in1_z);
add %sp,LOCALS+$Z1sqr,$rp
add $bp_real,64,$bp
add %sp,LOCALS+$Z2sqr,$ap
call __ecp_nistz256_mul_mont ! p256_mul_mont(S1, Z2sqr, in2_z);
add %sp,LOCALS+$S1,$rp
add $ap_real,64,$bp
add %sp,LOCALS+$Z1sqr,$ap
call __ecp_nistz256_mul_mont ! p256_mul_mont(S2, Z1sqr, in1_z);
add %sp,LOCALS+$S2,$rp
add $ap_real,32,$bp
add %sp,LOCALS+$S1,$ap
call __ecp_nistz256_mul_mont ! p256_mul_mont(S1, S1, in1_y);
add %sp,LOCALS+$S1,$rp
add $bp_real,32,$bp
add %sp,LOCALS+$S2,$ap
call __ecp_nistz256_mul_mont ! p256_mul_mont(S2, S2, in2_y);
add %sp,LOCALS+$S2,$rp
add %sp,LOCALS+$S1,$bp
call __ecp_nistz256_sub_from ! p256_sub(R, S2, S1);
add %sp,LOCALS+$R,$rp
or @acc[1],@acc[0],@acc[0] ! see if result is zero
or @acc[3],@acc[2],@acc[2]
or @acc[5],@acc[4],@acc[4]
or @acc[7],@acc[6],@acc[6]
or @acc[2],@acc[0],@acc[0]
or @acc[6],@acc[4],@acc[4]
or @acc[4],@acc[0],@acc[0]
st @acc[0],[%fp+STACK_BIAS-20]
add $ap_real,0,$bp
add %sp,LOCALS+$Z2sqr,$ap
call __ecp_nistz256_mul_mont ! p256_mul_mont(U1, in1_x, Z2sqr);
add %sp,LOCALS+$U1,$rp
add $bp_real,0,$bp
add %sp,LOCALS+$Z1sqr,$ap
call __ecp_nistz256_mul_mont ! p256_mul_mont(U2, in2_x, Z1sqr);
add %sp,LOCALS+$U2,$rp
add %sp,LOCALS+$U1,$bp
call __ecp_nistz256_sub_from ! p256_sub(H, U2, U1);
add %sp,LOCALS+$H,$rp
or @acc[1],@acc[0],@acc[0] ! see if result is zero
or @acc[3],@acc[2],@acc[2]
or @acc[5],@acc[4],@acc[4]
or @acc[7],@acc[6],@acc[6]
or @acc[2],@acc[0],@acc[0]
or @acc[6],@acc[4],@acc[4]
orcc @acc[4],@acc[0],@acc[0]
bne,pt %icc,.Ladd_proceed ! is_equal(U1,U2)?
nop
ld [%fp+STACK_BIAS-12],$t0
ld [%fp+STACK_BIAS-16],$t1
ld [%fp+STACK_BIAS-20],$t2
andcc $t0,$t1,%g0
be,pt %icc,.Ladd_proceed ! (in1infty || in2infty)?
nop
andcc $t2,$t2,%g0
be,pt %icc,.Ladd_double ! is_equal(S1,S2)?
nop
ldx [%fp+STACK_BIAS-8],$rp
st %g0,[$rp]
st %g0,[$rp+4]
st %g0,[$rp+8]
st %g0,[$rp+12]
st %g0,[$rp+16]
st %g0,[$rp+20]
st %g0,[$rp+24]
st %g0,[$rp+28]
st %g0,[$rp+32]
st %g0,[$rp+32+4]
st %g0,[$rp+32+8]
st %g0,[$rp+32+12]
st %g0,[$rp+32+16]
st %g0,[$rp+32+20]
st %g0,[$rp+32+24]
st %g0,[$rp+32+28]
st %g0,[$rp+64]
st %g0,[$rp+64+4]
st %g0,[$rp+64+8]
st %g0,[$rp+64+12]
st %g0,[$rp+64+16]
st %g0,[$rp+64+20]
st %g0,[$rp+64+24]
st %g0,[$rp+64+28]
b .Ladd_done
nop
.align 16
.Ladd_double:
ldx [%fp+STACK_BIAS-8],$rp_real
mov $ap_real,$ap
b .Lpoint_double_shortcut
add %sp,32*(12-4)+32,%sp ! difference in frame sizes
.align 16
.Ladd_proceed:
add %sp,LOCALS+$R,$bp
add %sp,LOCALS+$R,$ap
call __ecp_nistz256_mul_mont ! p256_sqr_mont(Rsqr, R);
add %sp,LOCALS+$Rsqr,$rp
add $ap_real,64,$bp
add %sp,LOCALS+$H,$ap
call __ecp_nistz256_mul_mont ! p256_mul_mont(res_z, H, in1_z);
add %sp,LOCALS+$res_z,$rp
add %sp,LOCALS+$H,$bp
add %sp,LOCALS+$H,$ap
call __ecp_nistz256_mul_mont ! p256_sqr_mont(Hsqr, H);
add %sp,LOCALS+$Hsqr,$rp
add $bp_real,64,$bp
add %sp,LOCALS+$res_z,$ap
call __ecp_nistz256_mul_mont ! p256_mul_mont(res_z, res_z, in2_z);
add %sp,LOCALS+$res_z,$rp
add %sp,LOCALS+$H,$bp
add %sp,LOCALS+$Hsqr,$ap
call __ecp_nistz256_mul_mont ! p256_mul_mont(Hcub, Hsqr, H);
add %sp,LOCALS+$Hcub,$rp
add %sp,LOCALS+$U1,$bp
add %sp,LOCALS+$Hsqr,$ap
call __ecp_nistz256_mul_mont ! p256_mul_mont(U2, U1, Hsqr);
add %sp,LOCALS+$U2,$rp
call __ecp_nistz256_mul_by_2 ! p256_mul_by_2(Hsqr, U2);
add %sp,LOCALS+$Hsqr,$rp
add %sp,LOCALS+$Rsqr,$bp
call __ecp_nistz256_sub_morf ! p256_sub(res_x, Rsqr, Hsqr);
add %sp,LOCALS+$res_x,$rp
add %sp,LOCALS+$Hcub,$bp
call __ecp_nistz256_sub_from ! p256_sub(res_x, res_x, Hcub);
add %sp,LOCALS+$res_x,$rp
add %sp,LOCALS+$U2,$bp
call __ecp_nistz256_sub_morf ! p256_sub(res_y, U2, res_x);
add %sp,LOCALS+$res_y,$rp
add %sp,LOCALS+$Hcub,$bp
add %sp,LOCALS+$S1,$ap
call __ecp_nistz256_mul_mont ! p256_mul_mont(S2, S1, Hcub);
add %sp,LOCALS+$S2,$rp
add %sp,LOCALS+$R,$bp
add %sp,LOCALS+$res_y,$ap
call __ecp_nistz256_mul_mont ! p256_mul_mont(res_y, res_y, R);
add %sp,LOCALS+$res_y,$rp
add %sp,LOCALS+$S2,$bp
call __ecp_nistz256_sub_from ! p256_sub(res_y, res_y, S2);
add %sp,LOCALS+$res_y,$rp
ld [%fp+STACK_BIAS-16],$t1 ! !in1infty
ld [%fp+STACK_BIAS-12],$t2 ! !in2infty
ldx [%fp+STACK_BIAS-8],$rp
___
for($i=0;$i<96;$i+=8) { # conditional moves
$code.=<<___;
ld [%sp+LOCALS+$i],@acc[0] ! res
ld [%sp+LOCALS+$i+4],@acc[1]
ld [$bp_real+$i],@acc[2] ! in2
ld [$bp_real+$i+4],@acc[3]
ld [$ap_real+$i],@acc[4] ! in1
ld [$ap_real+$i+4],@acc[5]
movrz $t1,@acc[2],@acc[0]
movrz $t1,@acc[3],@acc[1]
movrz $t2,@acc[4],@acc[0]
movrz $t2,@acc[5],@acc[1]
st @acc[0],[$rp+$i]
st @acc[1],[$rp+$i+4]
___
}
$code.=<<___;
.Ladd_done:
ret
restore
.type ecp_nistz256_point_add,#function
.size ecp_nistz256_point_add,.-ecp_nistz256_point_add
___
}
########################################################################
# void ecp_nistz256_point_add_affine(P256_POINT *out,const P256_POINT *in1,
# const P256_POINT_AFFINE *in2);
{
my ($res_x,$res_y,$res_z,
$U2,$S2,$H,$R,$Hsqr,$Hcub,$Rsqr)=map(32*$_,(0..9));
my $Z1sqr = $S2;
# above map() describes stack layout with 10 temporary
# 256-bit vectors on top. Then we reserve some space for
# !in1infty, !in2infty, result of check for zero and return pointer.
my @ONE_mont=(1,0,0,-1,-1,-1,-2,0);
my $bp_real=$rp_real;
$code.=<<___;
.globl ecp_nistz256_point_add_affine
.align 32
ecp_nistz256_point_add_affine:
SPARC_LOAD_ADDRESS_LEAF(OPENSSL_sparcv9cap_P,%g1,%g5)
ld [%g1],%g1 ! OPENSSL_sparcv9cap_P[0]
and %g1,(SPARCV9_VIS3|SPARCV9_64BIT_STACK),%g1
cmp %g1,(SPARCV9_VIS3|SPARCV9_64BIT_STACK)
be ecp_nistz256_point_add_affine_vis3
nop
save %sp,-STACK_FRAME-32*10-32,%sp
stx $rp,[%fp+STACK_BIAS-8] ! off-load $rp
mov $ap,$ap_real
mov $bp,$bp_real
ld [$ap+64],$t0 ! in1_z
ld [$ap+64+4],$t1
ld [$ap+64+8],$t2
ld [$ap+64+12],$t3
ld [$ap+64+16],$t4
ld [$ap+64+20],$t5
ld [$ap+64+24],$t6
ld [$ap+64+28],$t7
or $t1,$t0,$t0
or $t3,$t2,$t2
or $t5,$t4,$t4
or $t7,$t6,$t6
or $t2,$t0,$t0
or $t6,$t4,$t4
or $t4,$t0,$t0 ! !in1infty
movrnz $t0,-1,$t0
st $t0,[%fp+STACK_BIAS-16]
ld [$bp],@acc[0] ! in2_x
ld [$bp+4],@acc[1]
ld [$bp+8],@acc[2]
ld [$bp+12],@acc[3]
ld [$bp+16],@acc[4]
ld [$bp+20],@acc[5]
ld [$bp+24],@acc[6]
ld [$bp+28],@acc[7]
ld [$bp+32],$t0 ! in2_y
ld [$bp+32+4],$t1
ld [$bp+32+8],$t2
ld [$bp+32+12],$t3
ld [$bp+32+16],$t4
ld [$bp+32+20],$t5
ld [$bp+32+24],$t6
ld [$bp+32+28],$t7
or @acc[1],@acc[0],@acc[0]
or @acc[3],@acc[2],@acc[2]
or @acc[5],@acc[4],@acc[4]
or @acc[7],@acc[6],@acc[6]
or @acc[2],@acc[0],@acc[0]
or @acc[6],@acc[4],@acc[4]
or @acc[4],@acc[0],@acc[0]
or $t1,$t0,$t0
or $t3,$t2,$t2
or $t5,$t4,$t4
or $t7,$t6,$t6
or $t2,$t0,$t0
or $t6,$t4,$t4
or $t4,$t0,$t0
or @acc[0],$t0,$t0 ! !in2infty
movrnz $t0,-1,$t0
st $t0,[%fp+STACK_BIAS-12]
add $ap_real,64,$bp
add $ap_real,64,$ap
call __ecp_nistz256_mul_mont ! p256_sqr_mont(Z1sqr, in1_z);
add %sp,LOCALS+$Z1sqr,$rp
add $bp_real,0,$bp
add %sp,LOCALS+$Z1sqr,$ap
call __ecp_nistz256_mul_mont ! p256_mul_mont(U2, Z1sqr, in2_x);
add %sp,LOCALS+$U2,$rp
add $ap_real,0,$bp
call __ecp_nistz256_sub_from ! p256_sub(H, U2, in1_x);
add %sp,LOCALS+$H,$rp
add $ap_real,64,$bp
add %sp,LOCALS+$Z1sqr,$ap
call __ecp_nistz256_mul_mont ! p256_mul_mont(S2, Z1sqr, in1_z);
add %sp,LOCALS+$S2,$rp
add $ap_real,64,$bp
add %sp,LOCALS+$H,$ap
call __ecp_nistz256_mul_mont ! p256_mul_mont(res_z, H, in1_z);
add %sp,LOCALS+$res_z,$rp
add $bp_real,32,$bp
add %sp,LOCALS+$S2,$ap
call __ecp_nistz256_mul_mont ! p256_mul_mont(S2, S2, in2_y);
add %sp,LOCALS+$S2,$rp
add $ap_real,32,$bp
call __ecp_nistz256_sub_from ! p256_sub(R, S2, in1_y);
add %sp,LOCALS+$R,$rp
add %sp,LOCALS+$H,$bp
add %sp,LOCALS+$H,$ap
call __ecp_nistz256_mul_mont ! p256_sqr_mont(Hsqr, H);
add %sp,LOCALS+$Hsqr,$rp
add %sp,LOCALS+$R,$bp
add %sp,LOCALS+$R,$ap
call __ecp_nistz256_mul_mont ! p256_sqr_mont(Rsqr, R);
add %sp,LOCALS+$Rsqr,$rp
add %sp,LOCALS+$H,$bp
add %sp,LOCALS+$Hsqr,$ap
call __ecp_nistz256_mul_mont ! p256_mul_mont(Hcub, Hsqr, H);
add %sp,LOCALS+$Hcub,$rp
add $ap_real,0,$bp
add %sp,LOCALS+$Hsqr,$ap
call __ecp_nistz256_mul_mont ! p256_mul_mont(U2, in1_x, Hsqr);
add %sp,LOCALS+$U2,$rp
call __ecp_nistz256_mul_by_2 ! p256_mul_by_2(Hsqr, U2);
add %sp,LOCALS+$Hsqr,$rp
add %sp,LOCALS+$Rsqr,$bp
call __ecp_nistz256_sub_morf ! p256_sub(res_x, Rsqr, Hsqr);
add %sp,LOCALS+$res_x,$rp
add %sp,LOCALS+$Hcub,$bp
call __ecp_nistz256_sub_from ! p256_sub(res_x, res_x, Hcub);
add %sp,LOCALS+$res_x,$rp
add %sp,LOCALS+$U2,$bp
call __ecp_nistz256_sub_morf ! p256_sub(res_y, U2, res_x);
add %sp,LOCALS+$res_y,$rp
add $ap_real,32,$bp
add %sp,LOCALS+$Hcub,$ap
call __ecp_nistz256_mul_mont ! p256_mul_mont(S2, in1_y, Hcub);
add %sp,LOCALS+$S2,$rp
add %sp,LOCALS+$R,$bp
add %sp,LOCALS+$res_y,$ap
call __ecp_nistz256_mul_mont ! p256_mul_mont(res_y, res_y, R);
add %sp,LOCALS+$res_y,$rp
add %sp,LOCALS+$S2,$bp
call __ecp_nistz256_sub_from ! p256_sub(res_y, res_y, S2);
add %sp,LOCALS+$res_y,$rp
ld [%fp+STACK_BIAS-16],$t1 ! !in1infty
ld [%fp+STACK_BIAS-12],$t2 ! !in2infty
ldx [%fp+STACK_BIAS-8],$rp
___
for($i=0;$i<64;$i+=8) { # conditional moves
$code.=<<___;
ld [%sp+LOCALS+$i],@acc[0] ! res
ld [%sp+LOCALS+$i+4],@acc[1]
ld [$bp_real+$i],@acc[2] ! in2
ld [$bp_real+$i+4],@acc[3]
ld [$ap_real+$i],@acc[4] ! in1
ld [$ap_real+$i+4],@acc[5]
movrz $t1,@acc[2],@acc[0]
movrz $t1,@acc[3],@acc[1]
movrz $t2,@acc[4],@acc[0]
movrz $t2,@acc[5],@acc[1]
st @acc[0],[$rp+$i]
st @acc[1],[$rp+$i+4]
___
}
for(;$i<96;$i+=8) {
my $j=($i-64)/4;
$code.=<<___;
ld [%sp+LOCALS+$i],@acc[0] ! res
ld [%sp+LOCALS+$i+4],@acc[1]
ld [$ap_real+$i],@acc[4] ! in1
ld [$ap_real+$i+4],@acc[5]
movrz $t1,@ONE_mont[$j],@acc[0]
movrz $t1,@ONE_mont[$j+1],@acc[1]
movrz $t2,@acc[4],@acc[0]
movrz $t2,@acc[5],@acc[1]
st @acc[0],[$rp+$i]
st @acc[1],[$rp+$i+4]
___
}
$code.=<<___;
ret
restore
.type ecp_nistz256_point_add_affine,#function
.size ecp_nistz256_point_add_affine,.-ecp_nistz256_point_add_affine
___
} }}}
{{{
my ($out,$inp,$index)=map("%i$_",(0..2));
my $mask="%o0";
$code.=<<___;
! void ecp_nistz256_scatter_w5(void *%i0,const P256_POINT *%i1,
! int %i2);
.globl ecp_nistz256_scatter_w5
.align 32
ecp_nistz256_scatter_w5:
save %sp,-STACK_FRAME,%sp
sll $index,2,$index
add $out,$index,$out
ld [$inp],%l0 ! X
ld [$inp+4],%l1
ld [$inp+8],%l2
ld [$inp+12],%l3
ld [$inp+16],%l4
ld [$inp+20],%l5
ld [$inp+24],%l6
ld [$inp+28],%l7
add $inp,32,$inp
st %l0,[$out+64*0-4]
st %l1,[$out+64*1-4]
st %l2,[$out+64*2-4]
st %l3,[$out+64*3-4]
st %l4,[$out+64*4-4]
st %l5,[$out+64*5-4]
st %l6,[$out+64*6-4]
st %l7,[$out+64*7-4]
add $out,64*8,$out
ld [$inp],%l0 ! Y
ld [$inp+4],%l1
ld [$inp+8],%l2
ld [$inp+12],%l3
ld [$inp+16],%l4
ld [$inp+20],%l5
ld [$inp+24],%l6
ld [$inp+28],%l7
add $inp,32,$inp
st %l0,[$out+64*0-4]
st %l1,[$out+64*1-4]
st %l2,[$out+64*2-4]
st %l3,[$out+64*3-4]
st %l4,[$out+64*4-4]
st %l5,[$out+64*5-4]
st %l6,[$out+64*6-4]
st %l7,[$out+64*7-4]
add $out,64*8,$out
ld [$inp],%l0 ! Z
ld [$inp+4],%l1
ld [$inp+8],%l2
ld [$inp+12],%l3
ld [$inp+16],%l4
ld [$inp+20],%l5
ld [$inp+24],%l6
ld [$inp+28],%l7
st %l0,[$out+64*0-4]
st %l1,[$out+64*1-4]
st %l2,[$out+64*2-4]
st %l3,[$out+64*3-4]
st %l4,[$out+64*4-4]
st %l5,[$out+64*5-4]
st %l6,[$out+64*6-4]
st %l7,[$out+64*7-4]
ret
restore
.type ecp_nistz256_scatter_w5,#function
.size ecp_nistz256_scatter_w5,.-ecp_nistz256_scatter_w5
! void ecp_nistz256_gather_w5(P256_POINT *%i0,const void *%i1,
! int %i2);
.globl ecp_nistz256_gather_w5
.align 32
ecp_nistz256_gather_w5:
save %sp,-STACK_FRAME,%sp
neg $index,$mask
srax $mask,63,$mask
add $index,$mask,$index
sll $index,2,$index
add $inp,$index,$inp
ld [$inp+64*0],%l0
ld [$inp+64*1],%l1
ld [$inp+64*2],%l2
ld [$inp+64*3],%l3
ld [$inp+64*4],%l4
ld [$inp+64*5],%l5
ld [$inp+64*6],%l6
ld [$inp+64*7],%l7
add $inp,64*8,$inp
and %l0,$mask,%l0
and %l1,$mask,%l1
st %l0,[$out] ! X
and %l2,$mask,%l2
st %l1,[$out+4]
and %l3,$mask,%l3
st %l2,[$out+8]
and %l4,$mask,%l4
st %l3,[$out+12]
and %l5,$mask,%l5
st %l4,[$out+16]
and %l6,$mask,%l6
st %l5,[$out+20]
and %l7,$mask,%l7
st %l6,[$out+24]
st %l7,[$out+28]
add $out,32,$out
ld [$inp+64*0],%l0
ld [$inp+64*1],%l1
ld [$inp+64*2],%l2
ld [$inp+64*3],%l3
ld [$inp+64*4],%l4
ld [$inp+64*5],%l5
ld [$inp+64*6],%l6
ld [$inp+64*7],%l7
add $inp,64*8,$inp
and %l0,$mask,%l0
and %l1,$mask,%l1
st %l0,[$out] ! Y
and %l2,$mask,%l2
st %l1,[$out+4]
and %l3,$mask,%l3
st %l2,[$out+8]
and %l4,$mask,%l4
st %l3,[$out+12]
and %l5,$mask,%l5
st %l4,[$out+16]
and %l6,$mask,%l6
st %l5,[$out+20]
and %l7,$mask,%l7
st %l6,[$out+24]
st %l7,[$out+28]
add $out,32,$out
ld [$inp+64*0],%l0
ld [$inp+64*1],%l1
ld [$inp+64*2],%l2
ld [$inp+64*3],%l3
ld [$inp+64*4],%l4
ld [$inp+64*5],%l5
ld [$inp+64*6],%l6
ld [$inp+64*7],%l7
and %l0,$mask,%l0
and %l1,$mask,%l1
st %l0,[$out] ! Z
and %l2,$mask,%l2
st %l1,[$out+4]
and %l3,$mask,%l3
st %l2,[$out+8]
and %l4,$mask,%l4
st %l3,[$out+12]
and %l5,$mask,%l5
st %l4,[$out+16]
and %l6,$mask,%l6
st %l5,[$out+20]
and %l7,$mask,%l7
st %l6,[$out+24]
st %l7,[$out+28]
ret
restore
.type ecp_nistz256_gather_w5,#function
.size ecp_nistz256_gather_w5,.-ecp_nistz256_gather_w5
! void ecp_nistz256_scatter_w7(void *%i0,const P256_POINT_AFFINE *%i1,
! int %i2);
.globl ecp_nistz256_scatter_w7
.align 32
ecp_nistz256_scatter_w7:
save %sp,-STACK_FRAME,%sp
nop
add $out,$index,$out
mov 64/4,$index
.Loop_scatter_w7:
ld [$inp],%l0
add $inp,4,$inp
subcc $index,1,$index
stb %l0,[$out+64*0-1]
srl %l0,8,%l1
stb %l1,[$out+64*1-1]
srl %l0,16,%l2
stb %l2,[$out+64*2-1]
srl %l0,24,%l3
stb %l3,[$out+64*3-1]
bne .Loop_scatter_w7
add $out,64*4,$out
ret
restore
.type ecp_nistz256_scatter_w7,#function
.size ecp_nistz256_scatter_w7,.-ecp_nistz256_scatter_w7
! void ecp_nistz256_gather_w7(P256_POINT_AFFINE *%i0,const void *%i1,
! int %i2);
.globl ecp_nistz256_gather_w7
.align 32
ecp_nistz256_gather_w7:
save %sp,-STACK_FRAME,%sp
neg $index,$mask
srax $mask,63,$mask
add $index,$mask,$index
add $inp,$index,$inp
mov 64/4,$index
.Loop_gather_w7:
ldub [$inp+64*0],%l0
prefetch [$inp+3840+64*0],1
subcc $index,1,$index
ldub [$inp+64*1],%l1
prefetch [$inp+3840+64*1],1
ldub [$inp+64*2],%l2
prefetch [$inp+3840+64*2],1
ldub [$inp+64*3],%l3
prefetch [$inp+3840+64*3],1
add $inp,64*4,$inp
sll %l1,8,%l1
sll %l2,16,%l2
or %l0,%l1,%l0
sll %l3,24,%l3
or %l0,%l2,%l0
or %l0,%l3,%l0
and %l0,$mask,%l0
st %l0,[$out]
bne .Loop_gather_w7
add $out,4,$out
ret
restore
.type ecp_nistz256_gather_w7,#function
.size ecp_nistz256_gather_w7,.-ecp_nistz256_gather_w7
___
}}}
{{{
########################################################################
# Following subroutines are VIS3 counterparts of those above that
# implement ones found in ecp_nistz256.c. Key difference is that they
# use 128-bit multiplication and addition with 64-bit carry, and in order
# to do that they perform conversion from uin32_t[8] to uint64_t[4] upon
# entry and vice versa on return.
#
my ($rp,$ap,$bp)=map("%i$_",(0..2));
my ($t0,$t1,$t2,$t3,$a0,$a1,$a2,$a3)=map("%l$_",(0..7));
my ($acc0,$acc1,$acc2,$acc3,$acc4,$acc5)=map("%o$_",(0..5));
my ($bi,$poly1,$poly3,$minus1)=(map("%i$_",(3..5)),"%g1");
my ($rp_real,$ap_real)=("%g2","%g3");
my ($acc6,$acc7)=($bp,$bi); # used in squaring
$code.=<<___;
.align 32
__ecp_nistz256_mul_by_2_vis3:
addcc $acc0,$acc0,$acc0
addxccc $acc1,$acc1,$acc1
addxccc $acc2,$acc2,$acc2
addxccc $acc3,$acc3,$acc3
b .Lreduce_by_sub_vis3
addxc %g0,%g0,$acc4 ! did it carry?
.type __ecp_nistz256_mul_by_2_vis3,#function
.size __ecp_nistz256_mul_by_2_vis3,.-__ecp_nistz256_mul_by_2_vis3
.align 32
__ecp_nistz256_add_vis3:
ldx [$bp+0],$t0
ldx [$bp+8],$t1
ldx [$bp+16],$t2
ldx [$bp+24],$t3
__ecp_nistz256_add_noload_vis3:
addcc $t0,$acc0,$acc0
addxccc $t1,$acc1,$acc1
addxccc $t2,$acc2,$acc2
addxccc $t3,$acc3,$acc3
addxc %g0,%g0,$acc4 ! did it carry?
.Lreduce_by_sub_vis3:
addcc $acc0,1,$t0 ! add -modulus, i.e. subtract
addxccc $acc1,$poly1,$t1
addxccc $acc2,$minus1,$t2
addxccc $acc3,$poly3,$t3
addxc $acc4,$minus1,$acc4
movrz $acc4,$t0,$acc0 ! ret = borrow ? ret : ret-modulus
movrz $acc4,$t1,$acc1
stx $acc0,[$rp]
movrz $acc4,$t2,$acc2
stx $acc1,[$rp+8]
movrz $acc4,$t3,$acc3
stx $acc2,[$rp+16]
retl
stx $acc3,[$rp+24]
.type __ecp_nistz256_add_vis3,#function
.size __ecp_nistz256_add_vis3,.-__ecp_nistz256_add_vis3
! Trouble with subtraction is that there is no subtraction with 64-bit
! borrow, only with 32-bit one. For this reason we "decompose" 64-bit
! $acc0-$acc3 to 32-bit values and pick b[4] in 32-bit pieces. But
! recall that SPARC is big-endian, which is why you'll observe that
! b[4] is accessed as 4-0-12-8-20-16-28-24. And prior reduction we
! "collect" result back to 64-bit $acc0-$acc3.
.align 32
__ecp_nistz256_sub_from_vis3:
ld [$bp+4],$t0
ld [$bp+0],$t1
ld [$bp+12],$t2
ld [$bp+8],$t3
srlx $acc0,32,$acc4
not $poly1,$poly1
srlx $acc1,32,$acc5
subcc $acc0,$t0,$acc0
ld [$bp+20],$t0
subccc $acc4,$t1,$acc4
ld [$bp+16],$t1
subccc $acc1,$t2,$acc1
ld [$bp+28],$t2
and $acc0,$poly1,$acc0
subccc $acc5,$t3,$acc5
ld [$bp+24],$t3
sllx $acc4,32,$acc4
and $acc1,$poly1,$acc1
sllx $acc5,32,$acc5
or $acc0,$acc4,$acc0
srlx $acc2,32,$acc4
or $acc1,$acc5,$acc1
srlx $acc3,32,$acc5
subccc $acc2,$t0,$acc2
subccc $acc4,$t1,$acc4
subccc $acc3,$t2,$acc3
and $acc2,$poly1,$acc2
subccc $acc5,$t3,$acc5
sllx $acc4,32,$acc4
and $acc3,$poly1,$acc3
sllx $acc5,32,$acc5
or $acc2,$acc4,$acc2
subc %g0,%g0,$acc4 ! did it borrow?
b .Lreduce_by_add_vis3
or $acc3,$acc5,$acc3
.type __ecp_nistz256_sub_from_vis3,#function
.size __ecp_nistz256_sub_from_vis3,.-__ecp_nistz256_sub_from_vis3
.align 32
__ecp_nistz256_sub_morf_vis3:
ld [$bp+4],$t0
ld [$bp+0],$t1
ld [$bp+12],$t2
ld [$bp+8],$t3
srlx $acc0,32,$acc4
not $poly1,$poly1
srlx $acc1,32,$acc5
subcc $t0,$acc0,$acc0
ld [$bp+20],$t0
subccc $t1,$acc4,$acc4
ld [$bp+16],$t1
subccc $t2,$acc1,$acc1
ld [$bp+28],$t2
and $acc0,$poly1,$acc0
subccc $t3,$acc5,$acc5
ld [$bp+24],$t3
sllx $acc4,32,$acc4
and $acc1,$poly1,$acc1
sllx $acc5,32,$acc5
or $acc0,$acc4,$acc0
srlx $acc2,32,$acc4
or $acc1,$acc5,$acc1
srlx $acc3,32,$acc5
subccc $t0,$acc2,$acc2
subccc $t1,$acc4,$acc4
subccc $t2,$acc3,$acc3
and $acc2,$poly1,$acc2
subccc $t3,$acc5,$acc5
sllx $acc4,32,$acc4
and $acc3,$poly1,$acc3
sllx $acc5,32,$acc5
or $acc2,$acc4,$acc2
subc %g0,%g0,$acc4 ! did it borrow?
or $acc3,$acc5,$acc3
.Lreduce_by_add_vis3:
addcc $acc0,-1,$t0 ! add modulus
not $poly3,$t3
addxccc $acc1,$poly1,$t1
not $poly1,$poly1 ! restore $poly1
addxccc $acc2,%g0,$t2
addxc $acc3,$t3,$t3
movrnz $acc4,$t0,$acc0 ! if a-b borrowed, ret = ret+mod
movrnz $acc4,$t1,$acc1
stx $acc0,[$rp]
movrnz $acc4,$t2,$acc2
stx $acc1,[$rp+8]
movrnz $acc4,$t3,$acc3
stx $acc2,[$rp+16]
retl
stx $acc3,[$rp+24]
.type __ecp_nistz256_sub_morf_vis3,#function
.size __ecp_nistz256_sub_morf_vis3,.-__ecp_nistz256_sub_morf_vis3
.align 32
__ecp_nistz256_div_by_2_vis3:
! ret = (a is odd ? a+mod : a) >> 1
not $poly1,$t1
not $poly3,$t3
and $acc0,1,$acc5
addcc $acc0,-1,$t0 ! add modulus
addxccc $acc1,$t1,$t1
addxccc $acc2,%g0,$t2
addxccc $acc3,$t3,$t3
addxc %g0,%g0,$acc4 ! carry bit
movrnz $acc5,$t0,$acc0
movrnz $acc5,$t1,$acc1
movrnz $acc5,$t2,$acc2
movrnz $acc5,$t3,$acc3
movrz $acc5,%g0,$acc4
! ret >>= 1
srlx $acc0,1,$acc0
sllx $acc1,63,$t0
srlx $acc1,1,$acc1
or $acc0,$t0,$acc0
sllx $acc2,63,$t1
srlx $acc2,1,$acc2
or $acc1,$t1,$acc1
sllx $acc3,63,$t2
stx $acc0,[$rp]
srlx $acc3,1,$acc3
or $acc2,$t2,$acc2
sllx $acc4,63,$t3 ! don't forget carry bit
stx $acc1,[$rp+8]
or $acc3,$t3,$acc3
stx $acc2,[$rp+16]
retl
stx $acc3,[$rp+24]
.type __ecp_nistz256_div_by_2_vis3,#function
.size __ecp_nistz256_div_by_2_vis3,.-__ecp_nistz256_div_by_2_vis3
! compared to __ecp_nistz256_mul_mont it's almost 4x smaller and
! 4x faster [on T4]...
.align 32
__ecp_nistz256_mul_mont_vis3:
mulx $a0,$bi,$acc0
not $poly3,$poly3 ! 0xFFFFFFFF00000001
umulxhi $a0,$bi,$t0
mulx $a1,$bi,$acc1
umulxhi $a1,$bi,$t1
mulx $a2,$bi,$acc2
umulxhi $a2,$bi,$t2
mulx $a3,$bi,$acc3
umulxhi $a3,$bi,$t3
ldx [$bp+8],$bi ! b[1]
addcc $acc1,$t0,$acc1 ! accumulate high parts of multiplication
sllx $acc0,32,$t0
addxccc $acc2,$t1,$acc2
srlx $acc0,32,$t1
addxccc $acc3,$t2,$acc3
addxc %g0,$t3,$acc4
mov 0,$acc5
___
for($i=1;$i<4;$i++) {
# Reduction iteration is normally performed by accumulating
# result of multiplication of modulus by "magic" digit [and
# omitting least significant word, which is guaranteed to
# be 0], but thanks to special form of modulus and "magic"
# digit being equal to least significant word, it can be
# performed with additions and subtractions alone. Indeed:
#
# ffff0001.00000000.0000ffff.ffffffff
# * abcdefgh
# + xxxxxxxx.xxxxxxxx.xxxxxxxx.xxxxxxxx.abcdefgh
#
# Now observing that ff..ff*x = (2^n-1)*x = 2^n*x-x, we
# rewrite above as:
#
# xxxxxxxx.xxxxxxxx.xxxxxxxx.xxxxxxxx.abcdefgh
# + abcdefgh.abcdefgh.0000abcd.efgh0000.00000000
# - 0000abcd.efgh0000.00000000.00000000.abcdefgh
#
# or marking redundant operations:
#
# xxxxxxxx.xxxxxxxx.xxxxxxxx.xxxxxxxx.--------
# + abcdefgh.abcdefgh.0000abcd.efgh0000.--------
# - 0000abcd.efgh0000.--------.--------.--------
# ^^^^^^^^ but this word is calculated with umulxhi, because
# there is no subtract with 64-bit borrow:-(
$code.=<<___;
sub $acc0,$t0,$t2 ! acc0*0xFFFFFFFF00000001, low part
umulxhi $acc0,$poly3,$t3 ! acc0*0xFFFFFFFF00000001, high part
addcc $acc1,$t0,$acc0 ! +=acc[0]<<96 and omit acc[0]
mulx $a0,$bi,$t0
addxccc $acc2,$t1,$acc1
mulx $a1,$bi,$t1
addxccc $acc3,$t2,$acc2 ! +=acc[0]*0xFFFFFFFF00000001
mulx $a2,$bi,$t2
addxccc $acc4,$t3,$acc3
mulx $a3,$bi,$t3
addxc $acc5,%g0,$acc4
addcc $acc0,$t0,$acc0 ! accumulate low parts of multiplication
umulxhi $a0,$bi,$t0
addxccc $acc1,$t1,$acc1
umulxhi $a1,$bi,$t1
addxccc $acc2,$t2,$acc2
umulxhi $a2,$bi,$t2
addxccc $acc3,$t3,$acc3
umulxhi $a3,$bi,$t3
addxc $acc4,%g0,$acc4
___
$code.=<<___ if ($i<3);
ldx [$bp+8*($i+1)],$bi ! bp[$i+1]
___
$code.=<<___;
addcc $acc1,$t0,$acc1 ! accumulate high parts of multiplication
sllx $acc0,32,$t0
addxccc $acc2,$t1,$acc2
srlx $acc0,32,$t1
addxccc $acc3,$t2,$acc3
addxccc $acc4,$t3,$acc4
addxc %g0,%g0,$acc5
___
}
$code.=<<___;
sub $acc0,$t0,$t2 ! acc0*0xFFFFFFFF00000001, low part
umulxhi $acc0,$poly3,$t3 ! acc0*0xFFFFFFFF00000001, high part
addcc $acc1,$t0,$acc0 ! +=acc[0]<<96 and omit acc[0]
addxccc $acc2,$t1,$acc1
addxccc $acc3,$t2,$acc2 ! +=acc[0]*0xFFFFFFFF00000001
addxccc $acc4,$t3,$acc3
b .Lmul_final_vis3 ! see below
addxc $acc5,%g0,$acc4
.type __ecp_nistz256_mul_mont_vis3,#function
.size __ecp_nistz256_mul_mont_vis3,.-__ecp_nistz256_mul_mont_vis3
! compared to above __ecp_nistz256_mul_mont_vis3 it's 21% less
! instructions, but only 14% faster [on T4]...
.align 32
__ecp_nistz256_sqr_mont_vis3:
! | | | | | |a1*a0| |
! | | | | |a2*a0| | |
! | |a3*a2|a3*a0| | | |
! | | | |a2*a1| | | |
! | | |a3*a1| | | | |
! *| | | | | | | | 2|
! +|a3*a3|a2*a2|a1*a1|a0*a0|
! |--+--+--+--+--+--+--+--|
! |A7|A6|A5|A4|A3|A2|A1|A0|, where Ax is $accx, i.e. follow $accx
!
! "can't overflow" below mark carrying into high part of
! multiplication result, which can't overflow, because it
! can never be all ones.
mulx $a1,$a0,$acc1 ! a[1]*a[0]
umulxhi $a1,$a0,$t1
mulx $a2,$a0,$acc2 ! a[2]*a[0]
umulxhi $a2,$a0,$t2
mulx $a3,$a0,$acc3 ! a[3]*a[0]
umulxhi $a3,$a0,$acc4
addcc $acc2,$t1,$acc2 ! accumulate high parts of multiplication
mulx $a2,$a1,$t0 ! a[2]*a[1]
umulxhi $a2,$a1,$t1
addxccc $acc3,$t2,$acc3
mulx $a3,$a1,$t2 ! a[3]*a[1]
umulxhi $a3,$a1,$t3
addxc $acc4,%g0,$acc4 ! can't overflow
mulx $a3,$a2,$acc5 ! a[3]*a[2]
not $poly3,$poly3 ! 0xFFFFFFFF00000001
umulxhi $a3,$a2,$acc6
addcc $t2,$t1,$t1 ! accumulate high parts of multiplication
mulx $a0,$a0,$acc0 ! a[0]*a[0]
addxc $t3,%g0,$t2 ! can't overflow
addcc $acc3,$t0,$acc3 ! accumulate low parts of multiplication
umulxhi $a0,$a0,$a0
addxccc $acc4,$t1,$acc4
mulx $a1,$a1,$t1 ! a[1]*a[1]
addxccc $acc5,$t2,$acc5
umulxhi $a1,$a1,$a1
addxc $acc6,%g0,$acc6 ! can't overflow
addcc $acc1,$acc1,$acc1 ! acc[1-6]*=2
mulx $a2,$a2,$t2 ! a[2]*a[2]
addxccc $acc2,$acc2,$acc2
umulxhi $a2,$a2,$a2
addxccc $acc3,$acc3,$acc3
mulx $a3,$a3,$t3 ! a[3]*a[3]
addxccc $acc4,$acc4,$acc4
umulxhi $a3,$a3,$a3
addxccc $acc5,$acc5,$acc5
addxccc $acc6,$acc6,$acc6
addxc %g0,%g0,$acc7
addcc $acc1,$a0,$acc1 ! +a[i]*a[i]
addxccc $acc2,$t1,$acc2
addxccc $acc3,$a1,$acc3
addxccc $acc4,$t2,$acc4
sllx $acc0,32,$t0
addxccc $acc5,$a2,$acc5
srlx $acc0,32,$t1
addxccc $acc6,$t3,$acc6
sub $acc0,$t0,$t2 ! acc0*0xFFFFFFFF00000001, low part
addxc $acc7,$a3,$acc7
___
for($i=0;$i<3;$i++) { # reductions, see commentary
# in multiplication for details
$code.=<<___;
umulxhi $acc0,$poly3,$t3 ! acc0*0xFFFFFFFF00000001, high part
addcc $acc1,$t0,$acc0 ! +=acc[0]<<96 and omit acc[0]
sllx $acc0,32,$t0
addxccc $acc2,$t1,$acc1
srlx $acc0,32,$t1
addxccc $acc3,$t2,$acc2 ! +=acc[0]*0xFFFFFFFF00000001
sub $acc0,$t0,$t2 ! acc0*0xFFFFFFFF00000001, low part
addxc %g0,$t3,$acc3 ! can't overflow
___
}
$code.=<<___;
umulxhi $acc0,$poly3,$t3 ! acc0*0xFFFFFFFF00000001, high part
addcc $acc1,$t0,$acc0 ! +=acc[0]<<96 and omit acc[0]
addxccc $acc2,$t1,$acc1
addxccc $acc3,$t2,$acc2 ! +=acc[0]*0xFFFFFFFF00000001
addxc %g0,$t3,$acc3 ! can't overflow
addcc $acc0,$acc4,$acc0 ! accumulate upper half
addxccc $acc1,$acc5,$acc1
addxccc $acc2,$acc6,$acc2
addxccc $acc3,$acc7,$acc3
addxc %g0,%g0,$acc4
.Lmul_final_vis3:
! Final step is "if result > mod, subtract mod", but as comparison
! means subtraction, we do the subtraction and then copy outcome
! if it didn't borrow. But note that as we [have to] replace
! subtraction with addition with negative, carry/borrow logic is
! inverse.
addcc $acc0,1,$t0 ! add -modulus, i.e. subtract
not $poly3,$poly3 ! restore 0x00000000FFFFFFFE
addxccc $acc1,$poly1,$t1
addxccc $acc2,$minus1,$t2
addxccc $acc3,$poly3,$t3
addxccc $acc4,$minus1,%g0 ! did it carry?
movcs %xcc,$t0,$acc0
movcs %xcc,$t1,$acc1
stx $acc0,[$rp]
movcs %xcc,$t2,$acc2
stx $acc1,[$rp+8]
movcs %xcc,$t3,$acc3
stx $acc2,[$rp+16]
retl
stx $acc3,[$rp+24]
.type __ecp_nistz256_sqr_mont_vis3,#function
.size __ecp_nistz256_sqr_mont_vis3,.-__ecp_nistz256_sqr_mont_vis3
___
########################################################################
# void ecp_nistz256_point_double(P256_POINT *out,const P256_POINT *inp);
#
{
my ($res_x,$res_y,$res_z,
$in_x,$in_y,$in_z,
$S,$M,$Zsqr,$tmp0)=map(32*$_,(0..9));
# above map() describes stack layout with 10 temporary
# 256-bit vectors on top.
$code.=<<___;
.align 32
ecp_nistz256_point_double_vis3:
save %sp,-STACK64_FRAME-32*10,%sp
mov $rp,$rp_real
.Ldouble_shortcut_vis3:
mov -1,$minus1
mov -2,$poly3
sllx $minus1,32,$poly1 ! 0xFFFFFFFF00000000
srl $poly3,0,$poly3 ! 0x00000000FFFFFFFE
! convert input to uint64_t[4]
ld [$ap],$a0 ! in_x
ld [$ap+4],$t0
ld [$ap+8],$a1
ld [$ap+12],$t1
ld [$ap+16],$a2
ld [$ap+20],$t2
ld [$ap+24],$a3
ld [$ap+28],$t3
sllx $t0,32,$t0
sllx $t1,32,$t1
ld [$ap+32],$acc0 ! in_y
or $a0,$t0,$a0
ld [$ap+32+4],$t0
sllx $t2,32,$t2
ld [$ap+32+8],$acc1
or $a1,$t1,$a1
ld [$ap+32+12],$t1
sllx $t3,32,$t3
ld [$ap+32+16],$acc2
or $a2,$t2,$a2
ld [$ap+32+20],$t2
or $a3,$t3,$a3
ld [$ap+32+24],$acc3
sllx $t0,32,$t0
ld [$ap+32+28],$t3
sllx $t1,32,$t1
stx $a0,[%sp+LOCALS64+$in_x]
sllx $t2,32,$t2
stx $a1,[%sp+LOCALS64+$in_x+8]
sllx $t3,32,$t3
stx $a2,[%sp+LOCALS64+$in_x+16]
or $acc0,$t0,$acc0
stx $a3,[%sp+LOCALS64+$in_x+24]
or $acc1,$t1,$acc1
stx $acc0,[%sp+LOCALS64+$in_y]
or $acc2,$t2,$acc2
stx $acc1,[%sp+LOCALS64+$in_y+8]
or $acc3,$t3,$acc3
stx $acc2,[%sp+LOCALS64+$in_y+16]
stx $acc3,[%sp+LOCALS64+$in_y+24]
ld [$ap+64],$a0 ! in_z
ld [$ap+64+4],$t0
ld [$ap+64+8],$a1
ld [$ap+64+12],$t1
ld [$ap+64+16],$a2
ld [$ap+64+20],$t2
ld [$ap+64+24],$a3
ld [$ap+64+28],$t3
sllx $t0,32,$t0
sllx $t1,32,$t1
or $a0,$t0,$a0
sllx $t2,32,$t2
or $a1,$t1,$a1
sllx $t3,32,$t3
or $a2,$t2,$a2
or $a3,$t3,$a3
sllx $t0,32,$t0
sllx $t1,32,$t1
stx $a0,[%sp+LOCALS64+$in_z]
sllx $t2,32,$t2
stx $a1,[%sp+LOCALS64+$in_z+8]
sllx $t3,32,$t3
stx $a2,[%sp+LOCALS64+$in_z+16]
stx $a3,[%sp+LOCALS64+$in_z+24]
! in_y is still in $acc0-$acc3
call __ecp_nistz256_mul_by_2_vis3 ! p256_mul_by_2(S, in_y);
add %sp,LOCALS64+$S,$rp
! in_z is still in $a0-$a3
call __ecp_nistz256_sqr_mont_vis3 ! p256_sqr_mont(Zsqr, in_z);
add %sp,LOCALS64+$Zsqr,$rp
mov $acc0,$a0 ! put Zsqr aside
mov $acc1,$a1
mov $acc2,$a2
mov $acc3,$a3
add %sp,LOCALS64+$in_x,$bp
call __ecp_nistz256_add_vis3 ! p256_add(M, Zsqr, in_x);
add %sp,LOCALS64+$M,$rp
mov $a0,$acc0 ! restore Zsqr
ldx [%sp+LOCALS64+$S],$a0 ! forward load
mov $a1,$acc1
ldx [%sp+LOCALS64+$S+8],$a1
mov $a2,$acc2
ldx [%sp+LOCALS64+$S+16],$a2
mov $a3,$acc3
ldx [%sp+LOCALS64+$S+24],$a3
add %sp,LOCALS64+$in_x,$bp
call __ecp_nistz256_sub_morf_vis3 ! p256_sub(Zsqr, in_x, Zsqr);
add %sp,LOCALS64+$Zsqr,$rp
call __ecp_nistz256_sqr_mont_vis3 ! p256_sqr_mont(S, S);
add %sp,LOCALS64+$S,$rp
ldx [%sp+LOCALS64+$in_z],$bi
ldx [%sp+LOCALS64+$in_y],$a0
ldx [%sp+LOCALS64+$in_y+8],$a1
ldx [%sp+LOCALS64+$in_y+16],$a2
ldx [%sp+LOCALS64+$in_y+24],$a3
add %sp,LOCALS64+$in_z,$bp
call __ecp_nistz256_mul_mont_vis3 ! p256_mul_mont(tmp0, in_z, in_y);
add %sp,LOCALS64+$tmp0,$rp
ldx [%sp+LOCALS64+$M],$bi ! forward load
ldx [%sp+LOCALS64+$Zsqr],$a0
ldx [%sp+LOCALS64+$Zsqr+8],$a1
ldx [%sp+LOCALS64+$Zsqr+16],$a2
ldx [%sp+LOCALS64+$Zsqr+24],$a3
call __ecp_nistz256_mul_by_2_vis3 ! p256_mul_by_2(res_z, tmp0);
add %sp,LOCALS64+$res_z,$rp
add %sp,LOCALS64+$M,$bp
call __ecp_nistz256_mul_mont_vis3 ! p256_mul_mont(M, M, Zsqr);
add %sp,LOCALS64+$M,$rp
mov $acc0,$a0 ! put aside M
mov $acc1,$a1
mov $acc2,$a2
mov $acc3,$a3
call __ecp_nistz256_mul_by_2_vis3
add %sp,LOCALS64+$M,$rp
mov $a0,$t0 ! copy M
ldx [%sp+LOCALS64+$S],$a0 ! forward load
mov $a1,$t1
ldx [%sp+LOCALS64+$S+8],$a1
mov $a2,$t2
ldx [%sp+LOCALS64+$S+16],$a2
mov $a3,$t3
ldx [%sp+LOCALS64+$S+24],$a3
call __ecp_nistz256_add_noload_vis3 ! p256_mul_by_3(M, M);
add %sp,LOCALS64+$M,$rp
call __ecp_nistz256_sqr_mont_vis3 ! p256_sqr_mont(tmp0, S);
add %sp,LOCALS64+$tmp0,$rp
ldx [%sp+LOCALS64+$S],$bi ! forward load
ldx [%sp+LOCALS64+$in_x],$a0
ldx [%sp+LOCALS64+$in_x+8],$a1
ldx [%sp+LOCALS64+$in_x+16],$a2
ldx [%sp+LOCALS64+$in_x+24],$a3
call __ecp_nistz256_div_by_2_vis3 ! p256_div_by_2(res_y, tmp0);
add %sp,LOCALS64+$res_y,$rp
add %sp,LOCALS64+$S,$bp
call __ecp_nistz256_mul_mont_vis3 ! p256_mul_mont(S, S, in_x);
add %sp,LOCALS64+$S,$rp
ldx [%sp+LOCALS64+$M],$a0 ! forward load
ldx [%sp+LOCALS64+$M+8],$a1
ldx [%sp+LOCALS64+$M+16],$a2
ldx [%sp+LOCALS64+$M+24],$a3
call __ecp_nistz256_mul_by_2_vis3 ! p256_mul_by_2(tmp0, S);
add %sp,LOCALS64+$tmp0,$rp
call __ecp_nistz256_sqr_mont_vis3 ! p256_sqr_mont(res_x, M);
add %sp,LOCALS64+$res_x,$rp
add %sp,LOCALS64+$tmp0,$bp
call __ecp_nistz256_sub_from_vis3 ! p256_sub(res_x, res_x, tmp0);
add %sp,LOCALS64+$res_x,$rp
ldx [%sp+LOCALS64+$M],$a0 ! forward load
ldx [%sp+LOCALS64+$M+8],$a1
ldx [%sp+LOCALS64+$M+16],$a2
ldx [%sp+LOCALS64+$M+24],$a3
add %sp,LOCALS64+$S,$bp
call __ecp_nistz256_sub_morf_vis3 ! p256_sub(S, S, res_x);
add %sp,LOCALS64+$S,$rp
mov $acc0,$bi
call __ecp_nistz256_mul_mont_vis3 ! p256_mul_mont(S, S, M);
add %sp,LOCALS64+$S,$rp
ldx [%sp+LOCALS64+$res_x],$a0 ! forward load
ldx [%sp+LOCALS64+$res_x+8],$a1
ldx [%sp+LOCALS64+$res_x+16],$a2
ldx [%sp+LOCALS64+$res_x+24],$a3
add %sp,LOCALS64+$res_y,$bp
call __ecp_nistz256_sub_from_vis3 ! p256_sub(res_y, S, res_y);
add %sp,LOCALS64+$res_y,$bp
! convert output to uint_32[8]
srlx $a0,32,$t0
srlx $a1,32,$t1
st $a0,[$rp_real] ! res_x
srlx $a2,32,$t2
st $t0,[$rp_real+4]
srlx $a3,32,$t3
st $a1,[$rp_real+8]
st $t1,[$rp_real+12]
st $a2,[$rp_real+16]
st $t2,[$rp_real+20]
st $a3,[$rp_real+24]
st $t3,[$rp_real+28]
ldx [%sp+LOCALS64+$res_z],$a0 ! forward load
srlx $acc0,32,$t0
ldx [%sp+LOCALS64+$res_z+8],$a1
srlx $acc1,32,$t1
ldx [%sp+LOCALS64+$res_z+16],$a2
srlx $acc2,32,$t2
ldx [%sp+LOCALS64+$res_z+24],$a3
srlx $acc3,32,$t3
st $acc0,[$rp_real+32] ! res_y
st $t0, [$rp_real+32+4]
st $acc1,[$rp_real+32+8]
st $t1, [$rp_real+32+12]
st $acc2,[$rp_real+32+16]
st $t2, [$rp_real+32+20]
st $acc3,[$rp_real+32+24]
st $t3, [$rp_real+32+28]
srlx $a0,32,$t0
srlx $a1,32,$t1
st $a0,[$rp_real+64] ! res_z
srlx $a2,32,$t2
st $t0,[$rp_real+64+4]
srlx $a3,32,$t3
st $a1,[$rp_real+64+8]
st $t1,[$rp_real+64+12]
st $a2,[$rp_real+64+16]
st $t2,[$rp_real+64+20]
st $a3,[$rp_real+64+24]
st $t3,[$rp_real+64+28]
ret
restore
.type ecp_nistz256_point_double_vis3,#function
.size ecp_nistz256_point_double_vis3,.-ecp_nistz256_point_double_vis3
___
}
########################################################################
# void ecp_nistz256_point_add(P256_POINT *out,const P256_POINT *in1,
# const P256_POINT *in2);
{
my ($res_x,$res_y,$res_z,
$in1_x,$in1_y,$in1_z,
$in2_x,$in2_y,$in2_z,
$H,$Hsqr,$R,$Rsqr,$Hcub,
$U1,$U2,$S1,$S2)=map(32*$_,(0..17));
my ($Z1sqr, $Z2sqr) = ($Hsqr, $Rsqr);
# above map() describes stack layout with 18 temporary
# 256-bit vectors on top. Then we reserve some space for
# !in1infty, !in2infty and result of check for zero.
$code.=<<___;
.globl ecp_nistz256_point_add_vis3
.align 32
ecp_nistz256_point_add_vis3:
save %sp,-STACK64_FRAME-32*18-32,%sp
mov $rp,$rp_real
mov -1,$minus1
mov -2,$poly3
sllx $minus1,32,$poly1 ! 0xFFFFFFFF00000000
srl $poly3,0,$poly3 ! 0x00000000FFFFFFFE
! convert input to uint64_t[4]
ld [$bp],$a0 ! in2_x
ld [$bp+4],$t0
ld [$bp+8],$a1
ld [$bp+12],$t1
ld [$bp+16],$a2
ld [$bp+20],$t2
ld [$bp+24],$a3
ld [$bp+28],$t3
sllx $t0,32,$t0
sllx $t1,32,$t1
ld [$bp+32],$acc0 ! in2_y
or $a0,$t0,$a0
ld [$bp+32+4],$t0
sllx $t2,32,$t2
ld [$bp+32+8],$acc1
or $a1,$t1,$a1
ld [$bp+32+12],$t1
sllx $t3,32,$t3
ld [$bp+32+16],$acc2
or $a2,$t2,$a2
ld [$bp+32+20],$t2
or $a3,$t3,$a3
ld [$bp+32+24],$acc3
sllx $t0,32,$t0
ld [$bp+32+28],$t3
sllx $t1,32,$t1
stx $a0,[%sp+LOCALS64+$in2_x]
sllx $t2,32,$t2
stx $a1,[%sp+LOCALS64+$in2_x+8]
sllx $t3,32,$t3
stx $a2,[%sp+LOCALS64+$in2_x+16]
or $acc0,$t0,$acc0
stx $a3,[%sp+LOCALS64+$in2_x+24]
or $acc1,$t1,$acc1
stx $acc0,[%sp+LOCALS64+$in2_y]
or $acc2,$t2,$acc2
stx $acc1,[%sp+LOCALS64+$in2_y+8]
or $acc3,$t3,$acc3
stx $acc2,[%sp+LOCALS64+$in2_y+16]
stx $acc3,[%sp+LOCALS64+$in2_y+24]
ld [$bp+64],$acc0 ! in2_z
ld [$bp+64+4],$t0
ld [$bp+64+8],$acc1
ld [$bp+64+12],$t1
ld [$bp+64+16],$acc2
ld [$bp+64+20],$t2
ld [$bp+64+24],$acc3
ld [$bp+64+28],$t3
sllx $t0,32,$t0
sllx $t1,32,$t1
ld [$ap],$a0 ! in1_x
or $acc0,$t0,$acc0
ld [$ap+4],$t0
sllx $t2,32,$t2
ld [$ap+8],$a1
or $acc1,$t1,$acc1
ld [$ap+12],$t1
sllx $t3,32,$t3
ld [$ap+16],$a2
or $acc2,$t2,$acc2
ld [$ap+20],$t2
or $acc3,$t3,$acc3
ld [$ap+24],$a3
sllx $t0,32,$t0
ld [$ap+28],$t3
sllx $t1,32,$t1
stx $acc0,[%sp+LOCALS64+$in2_z]
sllx $t2,32,$t2
stx $acc1,[%sp+LOCALS64+$in2_z+8]
sllx $t3,32,$t3
stx $acc2,[%sp+LOCALS64+$in2_z+16]
stx $acc3,[%sp+LOCALS64+$in2_z+24]
or $acc1,$acc0,$acc0
or $acc3,$acc2,$acc2
or $acc2,$acc0,$acc0
movrnz $acc0,-1,$acc0 ! !in2infty
stx $acc0,[%fp+STACK_BIAS-8]
or $a0,$t0,$a0
ld [$ap+32],$acc0 ! in1_y
or $a1,$t1,$a1
ld [$ap+32+4],$t0
or $a2,$t2,$a2
ld [$ap+32+8],$acc1
or $a3,$t3,$a3
ld [$ap+32+12],$t1
ld [$ap+32+16],$acc2
ld [$ap+32+20],$t2
ld [$ap+32+24],$acc3
sllx $t0,32,$t0
ld [$ap+32+28],$t3
sllx $t1,32,$t1
stx $a0,[%sp+LOCALS64+$in1_x]
sllx $t2,32,$t2
stx $a1,[%sp+LOCALS64+$in1_x+8]
sllx $t3,32,$t3
stx $a2,[%sp+LOCALS64+$in1_x+16]
or $acc0,$t0,$acc0
stx $a3,[%sp+LOCALS64+$in1_x+24]
or $acc1,$t1,$acc1
stx $acc0,[%sp+LOCALS64+$in1_y]
or $acc2,$t2,$acc2
stx $acc1,[%sp+LOCALS64+$in1_y+8]
or $acc3,$t3,$acc3
stx $acc2,[%sp+LOCALS64+$in1_y+16]
stx $acc3,[%sp+LOCALS64+$in1_y+24]
ldx [%sp+LOCALS64+$in2_z],$a0 ! forward load
ldx [%sp+LOCALS64+$in2_z+8],$a1
ldx [%sp+LOCALS64+$in2_z+16],$a2
ldx [%sp+LOCALS64+$in2_z+24],$a3
ld [$ap+64],$acc0 ! in1_z
ld [$ap+64+4],$t0
ld [$ap+64+8],$acc1
ld [$ap+64+12],$t1
ld [$ap+64+16],$acc2
ld [$ap+64+20],$t2
ld [$ap+64+24],$acc3
ld [$ap+64+28],$t3
sllx $t0,32,$t0
sllx $t1,32,$t1
or $acc0,$t0,$acc0
sllx $t2,32,$t2
or $acc1,$t1,$acc1
sllx $t3,32,$t3
stx $acc0,[%sp+LOCALS64+$in1_z]
or $acc2,$t2,$acc2
stx $acc1,[%sp+LOCALS64+$in1_z+8]
or $acc3,$t3,$acc3
stx $acc2,[%sp+LOCALS64+$in1_z+16]
stx $acc3,[%sp+LOCALS64+$in1_z+24]
or $acc1,$acc0,$acc0
or $acc3,$acc2,$acc2
or $acc2,$acc0,$acc0
movrnz $acc0,-1,$acc0 ! !in1infty
stx $acc0,[%fp+STACK_BIAS-16]
call __ecp_nistz256_sqr_mont_vis3 ! p256_sqr_mont(Z2sqr, in2_z);
add %sp,LOCALS64+$Z2sqr,$rp
ldx [%sp+LOCALS64+$in1_z],$a0
ldx [%sp+LOCALS64+$in1_z+8],$a1
ldx [%sp+LOCALS64+$in1_z+16],$a2
ldx [%sp+LOCALS64+$in1_z+24],$a3
call __ecp_nistz256_sqr_mont_vis3 ! p256_sqr_mont(Z1sqr, in1_z);
add %sp,LOCALS64+$Z1sqr,$rp
ldx [%sp+LOCALS64+$Z2sqr],$bi
ldx [%sp+LOCALS64+$in2_z],$a0
ldx [%sp+LOCALS64+$in2_z+8],$a1
ldx [%sp+LOCALS64+$in2_z+16],$a2
ldx [%sp+LOCALS64+$in2_z+24],$a3
add %sp,LOCALS64+$Z2sqr,$bp
call __ecp_nistz256_mul_mont_vis3 ! p256_mul_mont(S1, Z2sqr, in2_z);
add %sp,LOCALS64+$S1,$rp
ldx [%sp+LOCALS64+$Z1sqr],$bi
ldx [%sp+LOCALS64+$in1_z],$a0
ldx [%sp+LOCALS64+$in1_z+8],$a1
ldx [%sp+LOCALS64+$in1_z+16],$a2
ldx [%sp+LOCALS64+$in1_z+24],$a3
add %sp,LOCALS64+$Z1sqr,$bp
call __ecp_nistz256_mul_mont_vis3 ! p256_mul_mont(S2, Z1sqr, in1_z);
add %sp,LOCALS64+$S2,$rp
ldx [%sp+LOCALS64+$S1],$bi
ldx [%sp+LOCALS64+$in1_y],$a0
ldx [%sp+LOCALS64+$in1_y+8],$a1
ldx [%sp+LOCALS64+$in1_y+16],$a2
ldx [%sp+LOCALS64+$in1_y+24],$a3
add %sp,LOCALS64+$S1,$bp
call __ecp_nistz256_mul_mont_vis3 ! p256_mul_mont(S1, S1, in1_y);
add %sp,LOCALS64+$S1,$rp
ldx [%sp+LOCALS64+$S2],$bi
ldx [%sp+LOCALS64+$in2_y],$a0
ldx [%sp+LOCALS64+$in2_y+8],$a1
ldx [%sp+LOCALS64+$in2_y+16],$a2
ldx [%sp+LOCALS64+$in2_y+24],$a3
add %sp,LOCALS64+$S2,$bp
call __ecp_nistz256_mul_mont_vis3 ! p256_mul_mont(S2, S2, in2_y);
add %sp,LOCALS64+$S2,$rp
ldx [%sp+LOCALS64+$Z2sqr],$bi ! forward load
ldx [%sp+LOCALS64+$in1_x],$a0
ldx [%sp+LOCALS64+$in1_x+8],$a1
ldx [%sp+LOCALS64+$in1_x+16],$a2
ldx [%sp+LOCALS64+$in1_x+24],$a3
add %sp,LOCALS64+$S1,$bp
call __ecp_nistz256_sub_from_vis3 ! p256_sub(R, S2, S1);
add %sp,LOCALS64+$R,$rp
or $acc1,$acc0,$acc0 ! see if result is zero
or $acc3,$acc2,$acc2
or $acc2,$acc0,$acc0
stx $acc0,[%fp+STACK_BIAS-24]
add %sp,LOCALS64+$Z2sqr,$bp
call __ecp_nistz256_mul_mont_vis3 ! p256_mul_mont(U1, in1_x, Z2sqr);
add %sp,LOCALS64+$U1,$rp
ldx [%sp+LOCALS64+$Z1sqr],$bi
ldx [%sp+LOCALS64+$in2_x],$a0
ldx [%sp+LOCALS64+$in2_x+8],$a1
ldx [%sp+LOCALS64+$in2_x+16],$a2
ldx [%sp+LOCALS64+$in2_x+24],$a3
add %sp,LOCALS64+$Z1sqr,$bp
call __ecp_nistz256_mul_mont_vis3 ! p256_mul_mont(U2, in2_x, Z1sqr);
add %sp,LOCALS64+$U2,$rp
ldx [%sp+LOCALS64+$R],$a0 ! forward load
ldx [%sp+LOCALS64+$R+8],$a1
ldx [%sp+LOCALS64+$R+16],$a2
ldx [%sp+LOCALS64+$R+24],$a3
add %sp,LOCALS64+$U1,$bp
call __ecp_nistz256_sub_from_vis3 ! p256_sub(H, U2, U1);
add %sp,LOCALS64+$H,$rp
or $acc1,$acc0,$acc0 ! see if result is zero
or $acc3,$acc2,$acc2
orcc $acc2,$acc0,$acc0
bne,pt %xcc,.Ladd_proceed_vis3 ! is_equal(U1,U2)?
nop
ldx [%fp+STACK_BIAS-8],$t0
ldx [%fp+STACK_BIAS-16],$t1
ldx [%fp+STACK_BIAS-24],$t2
andcc $t0,$t1,%g0
be,pt %xcc,.Ladd_proceed_vis3 ! (in1infty || in2infty)?
nop
andcc $t2,$t2,%g0
be,a,pt %xcc,.Ldouble_shortcut_vis3 ! is_equal(S1,S2)?
add %sp,32*(12-10)+32,%sp ! difference in frame sizes
st %g0,[$rp_real]
st %g0,[$rp_real+4]
st %g0,[$rp_real+8]
st %g0,[$rp_real+12]
st %g0,[$rp_real+16]
st %g0,[$rp_real+20]
st %g0,[$rp_real+24]
st %g0,[$rp_real+28]
st %g0,[$rp_real+32]
st %g0,[$rp_real+32+4]
st %g0,[$rp_real+32+8]
st %g0,[$rp_real+32+12]
st %g0,[$rp_real+32+16]
st %g0,[$rp_real+32+20]
st %g0,[$rp_real+32+24]
st %g0,[$rp_real+32+28]
st %g0,[$rp_real+64]
st %g0,[$rp_real+64+4]
st %g0,[$rp_real+64+8]
st %g0,[$rp_real+64+12]
st %g0,[$rp_real+64+16]
st %g0,[$rp_real+64+20]
st %g0,[$rp_real+64+24]
st %g0,[$rp_real+64+28]
b .Ladd_done_vis3
nop
.align 16
.Ladd_proceed_vis3:
call __ecp_nistz256_sqr_mont_vis3 ! p256_sqr_mont(Rsqr, R);
add %sp,LOCALS64+$Rsqr,$rp
ldx [%sp+LOCALS64+$H],$bi
ldx [%sp+LOCALS64+$in1_z],$a0
ldx [%sp+LOCALS64+$in1_z+8],$a1
ldx [%sp+LOCALS64+$in1_z+16],$a2
ldx [%sp+LOCALS64+$in1_z+24],$a3
add %sp,LOCALS64+$H,$bp
call __ecp_nistz256_mul_mont_vis3 ! p256_mul_mont(res_z, H, in1_z);
add %sp,LOCALS64+$res_z,$rp
ldx [%sp+LOCALS64+$H],$a0
ldx [%sp+LOCALS64+$H+8],$a1
ldx [%sp+LOCALS64+$H+16],$a2
ldx [%sp+LOCALS64+$H+24],$a3
call __ecp_nistz256_sqr_mont_vis3 ! p256_sqr_mont(Hsqr, H);
add %sp,LOCALS64+$Hsqr,$rp
ldx [%sp+LOCALS64+$res_z],$bi
ldx [%sp+LOCALS64+$in2_z],$a0
ldx [%sp+LOCALS64+$in2_z+8],$a1
ldx [%sp+LOCALS64+$in2_z+16],$a2
ldx [%sp+LOCALS64+$in2_z+24],$a3
add %sp,LOCALS64+$res_z,$bp
call __ecp_nistz256_mul_mont_vis3 ! p256_mul_mont(res_z, res_z, in2_z);
add %sp,LOCALS64+$res_z,$rp
ldx [%sp+LOCALS64+$H],$bi
ldx [%sp+LOCALS64+$Hsqr],$a0
ldx [%sp+LOCALS64+$Hsqr+8],$a1
ldx [%sp+LOCALS64+$Hsqr+16],$a2
ldx [%sp+LOCALS64+$Hsqr+24],$a3
add %sp,LOCALS64+$H,$bp
call __ecp_nistz256_mul_mont_vis3 ! p256_mul_mont(Hcub, Hsqr, H);
add %sp,LOCALS64+$Hcub,$rp
ldx [%sp+LOCALS64+$U1],$bi
ldx [%sp+LOCALS64+$Hsqr],$a0
ldx [%sp+LOCALS64+$Hsqr+8],$a1
ldx [%sp+LOCALS64+$Hsqr+16],$a2
ldx [%sp+LOCALS64+$Hsqr+24],$a3
add %sp,LOCALS64+$U1,$bp
call __ecp_nistz256_mul_mont_vis3 ! p256_mul_mont(U2, U1, Hsqr);
add %sp,LOCALS64+$U2,$rp
call __ecp_nistz256_mul_by_2_vis3 ! p256_mul_by_2(Hsqr, U2);
add %sp,LOCALS64+$Hsqr,$rp
add %sp,LOCALS64+$Rsqr,$bp
call __ecp_nistz256_sub_morf_vis3 ! p256_sub(res_x, Rsqr, Hsqr);
add %sp,LOCALS64+$res_x,$rp
add %sp,LOCALS64+$Hcub,$bp
call __ecp_nistz256_sub_from_vis3 ! p256_sub(res_x, res_x, Hcub);
add %sp,LOCALS64+$res_x,$rp
ldx [%sp+LOCALS64+$S1],$bi ! forward load
ldx [%sp+LOCALS64+$Hcub],$a0
ldx [%sp+LOCALS64+$Hcub+8],$a1
ldx [%sp+LOCALS64+$Hcub+16],$a2
ldx [%sp+LOCALS64+$Hcub+24],$a3
add %sp,LOCALS64+$U2,$bp
call __ecp_nistz256_sub_morf_vis3 ! p256_sub(res_y, U2, res_x);
add %sp,LOCALS64+$res_y,$rp
add %sp,LOCALS64+$S1,$bp
call __ecp_nistz256_mul_mont_vis3 ! p256_mul_mont(S2, S1, Hcub);
add %sp,LOCALS64+$S2,$rp
ldx [%sp+LOCALS64+$R],$bi
ldx [%sp+LOCALS64+$res_y],$a0
ldx [%sp+LOCALS64+$res_y+8],$a1
ldx [%sp+LOCALS64+$res_y+16],$a2
ldx [%sp+LOCALS64+$res_y+24],$a3
add %sp,LOCALS64+$R,$bp
call __ecp_nistz256_mul_mont_vis3 ! p256_mul_mont(res_y, res_y, R);
add %sp,LOCALS64+$res_y,$rp
add %sp,LOCALS64+$S2,$bp
call __ecp_nistz256_sub_from_vis3 ! p256_sub(res_y, res_y, S2);
add %sp,LOCALS64+$res_y,$rp
ldx [%fp+STACK_BIAS-16],$t1 ! !in1infty
ldx [%fp+STACK_BIAS-8],$t2 ! !in2infty
___
for($i=0;$i<96;$i+=16) { # conditional moves
$code.=<<___;
ldx [%sp+LOCALS64+$res_x+$i],$acc0 ! res
ldx [%sp+LOCALS64+$res_x+$i+8],$acc1
ldx [%sp+LOCALS64+$in2_x+$i],$acc2 ! in2
ldx [%sp+LOCALS64+$in2_x+$i+8],$acc3
ldx [%sp+LOCALS64+$in1_x+$i],$acc4 ! in1
ldx [%sp+LOCALS64+$in1_x+$i+8],$acc5
movrz $t1,$acc2,$acc0
movrz $t1,$acc3,$acc1
movrz $t2,$acc4,$acc0
movrz $t2,$acc5,$acc1
srlx $acc0,32,$acc2
srlx $acc1,32,$acc3
st $acc0,[$rp_real+$i]
st $acc2,[$rp_real+$i+4]
st $acc1,[$rp_real+$i+8]
st $acc3,[$rp_real+$i+12]
___
}
$code.=<<___;
.Ladd_done_vis3:
ret
restore
.type ecp_nistz256_point_add_vis3,#function
.size ecp_nistz256_point_add_vis3,.-ecp_nistz256_point_add_vis3
___
}
########################################################################
# void ecp_nistz256_point_add_affine(P256_POINT *out,const P256_POINT *in1,
# const P256_POINT_AFFINE *in2);
{
my ($res_x,$res_y,$res_z,
$in1_x,$in1_y,$in1_z,
$in2_x,$in2_y,
$U2,$S2,$H,$R,$Hsqr,$Hcub,$Rsqr)=map(32*$_,(0..14));
my $Z1sqr = $S2;
# above map() describes stack layout with 15 temporary
# 256-bit vectors on top. Then we reserve some space for
# !in1infty and !in2infty.
$code.=<<___;
.align 32
ecp_nistz256_point_add_affine_vis3:
save %sp,-STACK64_FRAME-32*15-32,%sp
mov $rp,$rp_real
mov -1,$minus1
mov -2,$poly3
sllx $minus1,32,$poly1 ! 0xFFFFFFFF00000000
srl $poly3,0,$poly3 ! 0x00000000FFFFFFFE
! convert input to uint64_t[4]
ld [$bp],$a0 ! in2_x
ld [$bp+4],$t0
ld [$bp+8],$a1
ld [$bp+12],$t1
ld [$bp+16],$a2
ld [$bp+20],$t2
ld [$bp+24],$a3
ld [$bp+28],$t3
sllx $t0,32,$t0
sllx $t1,32,$t1
ld [$bp+32],$acc0 ! in2_y
or $a0,$t0,$a0
ld [$bp+32+4],$t0
sllx $t2,32,$t2
ld [$bp+32+8],$acc1
or $a1,$t1,$a1
ld [$bp+32+12],$t1
sllx $t3,32,$t3
ld [$bp+32+16],$acc2
or $a2,$t2,$a2
ld [$bp+32+20],$t2
or $a3,$t3,$a3
ld [$bp+32+24],$acc3
sllx $t0,32,$t0
ld [$bp+32+28],$t3
sllx $t1,32,$t1
stx $a0,[%sp+LOCALS64+$in2_x]
sllx $t2,32,$t2
stx $a1,[%sp+LOCALS64+$in2_x+8]
sllx $t3,32,$t3
stx $a2,[%sp+LOCALS64+$in2_x+16]
or $acc0,$t0,$acc0
stx $a3,[%sp+LOCALS64+$in2_x+24]
or $acc1,$t1,$acc1
stx $acc0,[%sp+LOCALS64+$in2_y]
or $acc2,$t2,$acc2
stx $acc1,[%sp+LOCALS64+$in2_y+8]
or $acc3,$t3,$acc3
stx $acc2,[%sp+LOCALS64+$in2_y+16]
stx $acc3,[%sp+LOCALS64+$in2_y+24]
or $a1,$a0,$a0
or $a3,$a2,$a2
or $acc1,$acc0,$acc0
or $acc3,$acc2,$acc2
or $a2,$a0,$a0
or $acc2,$acc0,$acc0
or $acc0,$a0,$a0
movrnz $a0,-1,$a0 ! !in2infty
stx $a0,[%fp+STACK_BIAS-8]
ld [$ap],$a0 ! in1_x
ld [$ap+4],$t0
ld [$ap+8],$a1
ld [$ap+12],$t1
ld [$ap+16],$a2
ld [$ap+20],$t2
ld [$ap+24],$a3
ld [$ap+28],$t3
sllx $t0,32,$t0
sllx $t1,32,$t1
ld [$ap+32],$acc0 ! in1_y
or $a0,$t0,$a0
ld [$ap+32+4],$t0
sllx $t2,32,$t2
ld [$ap+32+8],$acc1
or $a1,$t1,$a1
ld [$ap+32+12],$t1
sllx $t3,32,$t3
ld [$ap+32+16],$acc2
or $a2,$t2,$a2
ld [$ap+32+20],$t2
or $a3,$t3,$a3
ld [$ap+32+24],$acc3
sllx $t0,32,$t0
ld [$ap+32+28],$t3
sllx $t1,32,$t1
stx $a0,[%sp+LOCALS64+$in1_x]
sllx $t2,32,$t2
stx $a1,[%sp+LOCALS64+$in1_x+8]
sllx $t3,32,$t3
stx $a2,[%sp+LOCALS64+$in1_x+16]
or $acc0,$t0,$acc0
stx $a3,[%sp+LOCALS64+$in1_x+24]
or $acc1,$t1,$acc1
stx $acc0,[%sp+LOCALS64+$in1_y]
or $acc2,$t2,$acc2
stx $acc1,[%sp+LOCALS64+$in1_y+8]
or $acc3,$t3,$acc3
stx $acc2,[%sp+LOCALS64+$in1_y+16]
stx $acc3,[%sp+LOCALS64+$in1_y+24]
ld [$ap+64],$a0 ! in1_z
ld [$ap+64+4],$t0
ld [$ap+64+8],$a1
ld [$ap+64+12],$t1
ld [$ap+64+16],$a2
ld [$ap+64+20],$t2
ld [$ap+64+24],$a3
ld [$ap+64+28],$t3
sllx $t0,32,$t0
sllx $t1,32,$t1
or $a0,$t0,$a0
sllx $t2,32,$t2
or $a1,$t1,$a1
sllx $t3,32,$t3
stx $a0,[%sp+LOCALS64+$in1_z]
or $a2,$t2,$a2
stx $a1,[%sp+LOCALS64+$in1_z+8]
or $a3,$t3,$a3
stx $a2,[%sp+LOCALS64+$in1_z+16]
stx $a3,[%sp+LOCALS64+$in1_z+24]
or $a1,$a0,$t0
or $a3,$a2,$t2
or $t2,$t0,$t0
movrnz $t0,-1,$t0 ! !in1infty
stx $t0,[%fp+STACK_BIAS-16]
call __ecp_nistz256_sqr_mont_vis3 ! p256_sqr_mont(Z1sqr, in1_z);
add %sp,LOCALS64+$Z1sqr,$rp
ldx [%sp+LOCALS64+$in2_x],$bi
mov $acc0,$a0
mov $acc1,$a1
mov $acc2,$a2
mov $acc3,$a3
add %sp,LOCALS64+$in2_x,$bp
call __ecp_nistz256_mul_mont_vis3 ! p256_mul_mont(U2, Z1sqr, in2_x);
add %sp,LOCALS64+$U2,$rp
ldx [%sp+LOCALS64+$Z1sqr],$bi ! forward load
ldx [%sp+LOCALS64+$in1_z],$a0
ldx [%sp+LOCALS64+$in1_z+8],$a1
ldx [%sp+LOCALS64+$in1_z+16],$a2
ldx [%sp+LOCALS64+$in1_z+24],$a3
add %sp,LOCALS64+$in1_x,$bp
call __ecp_nistz256_sub_from_vis3 ! p256_sub(H, U2, in1_x);
add %sp,LOCALS64+$H,$rp
add %sp,LOCALS64+$Z1sqr,$bp
call __ecp_nistz256_mul_mont_vis3 ! p256_mul_mont(S2, Z1sqr, in1_z);
add %sp,LOCALS64+$S2,$rp
ldx [%sp+LOCALS64+$H],$bi
ldx [%sp+LOCALS64+$in1_z],$a0
ldx [%sp+LOCALS64+$in1_z+8],$a1
ldx [%sp+LOCALS64+$in1_z+16],$a2
ldx [%sp+LOCALS64+$in1_z+24],$a3
add %sp,LOCALS64+$H,$bp
call __ecp_nistz256_mul_mont_vis3 ! p256_mul_mont(res_z, H, in1_z);
add %sp,LOCALS64+$res_z,$rp
ldx [%sp+LOCALS64+$S2],$bi
ldx [%sp+LOCALS64+$in2_y],$a0
ldx [%sp+LOCALS64+$in2_y+8],$a1
ldx [%sp+LOCALS64+$in2_y+16],$a2
ldx [%sp+LOCALS64+$in2_y+24],$a3
add %sp,LOCALS64+$S2,$bp
call __ecp_nistz256_mul_mont_vis3 ! p256_mul_mont(S2, S2, in2_y);
add %sp,LOCALS64+$S2,$rp
ldx [%sp+LOCALS64+$H],$a0 ! forward load
ldx [%sp+LOCALS64+$H+8],$a1
ldx [%sp+LOCALS64+$H+16],$a2
ldx [%sp+LOCALS64+$H+24],$a3
add %sp,LOCALS64+$in1_y,$bp
call __ecp_nistz256_sub_from_vis3 ! p256_sub(R, S2, in1_y);
add %sp,LOCALS64+$R,$rp
call __ecp_nistz256_sqr_mont_vis3 ! p256_sqr_mont(Hsqr, H);
add %sp,LOCALS64+$Hsqr,$rp
ldx [%sp+LOCALS64+$R],$a0
ldx [%sp+LOCALS64+$R+8],$a1
ldx [%sp+LOCALS64+$R+16],$a2
ldx [%sp+LOCALS64+$R+24],$a3
call __ecp_nistz256_sqr_mont_vis3 ! p256_sqr_mont(Rsqr, R);
add %sp,LOCALS64+$Rsqr,$rp
ldx [%sp+LOCALS64+$H],$bi
ldx [%sp+LOCALS64+$Hsqr],$a0
ldx [%sp+LOCALS64+$Hsqr+8],$a1
ldx [%sp+LOCALS64+$Hsqr+16],$a2
ldx [%sp+LOCALS64+$Hsqr+24],$a3
add %sp,LOCALS64+$H,$bp
call __ecp_nistz256_mul_mont_vis3 ! p256_mul_mont(Hcub, Hsqr, H);
add %sp,LOCALS64+$Hcub,$rp
ldx [%sp+LOCALS64+$Hsqr],$bi
ldx [%sp+LOCALS64+$in1_x],$a0
ldx [%sp+LOCALS64+$in1_x+8],$a1
ldx [%sp+LOCALS64+$in1_x+16],$a2
ldx [%sp+LOCALS64+$in1_x+24],$a3
add %sp,LOCALS64+$Hsqr,$bp
call __ecp_nistz256_mul_mont_vis3 ! p256_mul_mont(U2, in1_x, Hsqr);
add %sp,LOCALS64+$U2,$rp
call __ecp_nistz256_mul_by_2_vis3 ! p256_mul_by_2(Hsqr, U2);
add %sp,LOCALS64+$Hsqr,$rp
add %sp,LOCALS64+$Rsqr,$bp
call __ecp_nistz256_sub_morf_vis3 ! p256_sub(res_x, Rsqr, Hsqr);
add %sp,LOCALS64+$res_x,$rp
add %sp,LOCALS64+$Hcub,$bp
call __ecp_nistz256_sub_from_vis3 ! p256_sub(res_x, res_x, Hcub);
add %sp,LOCALS64+$res_x,$rp
ldx [%sp+LOCALS64+$Hcub],$bi ! forward load
ldx [%sp+LOCALS64+$in1_y],$a0
ldx [%sp+LOCALS64+$in1_y+8],$a1
ldx [%sp+LOCALS64+$in1_y+16],$a2
ldx [%sp+LOCALS64+$in1_y+24],$a3
add %sp,LOCALS64+$U2,$bp
call __ecp_nistz256_sub_morf_vis3 ! p256_sub(res_y, U2, res_x);
add %sp,LOCALS64+$res_y,$rp
add %sp,LOCALS64+$Hcub,$bp
call __ecp_nistz256_mul_mont_vis3 ! p256_mul_mont(S2, in1_y, Hcub);
add %sp,LOCALS64+$S2,$rp
ldx [%sp+LOCALS64+$R],$bi
ldx [%sp+LOCALS64+$res_y],$a0
ldx [%sp+LOCALS64+$res_y+8],$a1
ldx [%sp+LOCALS64+$res_y+16],$a2
ldx [%sp+LOCALS64+$res_y+24],$a3
add %sp,LOCALS64+$R,$bp
call __ecp_nistz256_mul_mont_vis3 ! p256_mul_mont(res_y, res_y, R);
add %sp,LOCALS64+$res_y,$rp
add %sp,LOCALS64+$S2,$bp
call __ecp_nistz256_sub_from_vis3 ! p256_sub(res_y, res_y, S2);
add %sp,LOCALS64+$res_y,$rp
ldx [%fp+STACK_BIAS-16],$t1 ! !in1infty
ldx [%fp+STACK_BIAS-8],$t2 ! !in2infty
1: call .+8
add %o7,.Lone_mont_vis3-1b,$bp
___
for($i=0;$i<64;$i+=16) { # conditional moves
$code.=<<___;
ldx [%sp+LOCALS64+$res_x+$i],$acc0 ! res
ldx [%sp+LOCALS64+$res_x+$i+8],$acc1
ldx [%sp+LOCALS64+$in2_x+$i],$acc2 ! in2
ldx [%sp+LOCALS64+$in2_x+$i+8],$acc3
ldx [%sp+LOCALS64+$in1_x+$i],$acc4 ! in1
ldx [%sp+LOCALS64+$in1_x+$i+8],$acc5
movrz $t1,$acc2,$acc0
movrz $t1,$acc3,$acc1
movrz $t2,$acc4,$acc0
movrz $t2,$acc5,$acc1
srlx $acc0,32,$acc2
srlx $acc1,32,$acc3
st $acc0,[$rp_real+$i]
st $acc2,[$rp_real+$i+4]
st $acc1,[$rp_real+$i+8]
st $acc3,[$rp_real+$i+12]
___
}
for(;$i<96;$i+=16) {
$code.=<<___;
ldx [%sp+LOCALS64+$res_x+$i],$acc0 ! res
ldx [%sp+LOCALS64+$res_x+$i+8],$acc1
ldx [$bp+$i-64],$acc2 ! "in2"
ldx [$bp+$i-64+8],$acc3
ldx [%sp+LOCALS64+$in1_x+$i],$acc4 ! in1
ldx [%sp+LOCALS64+$in1_x+$i+8],$acc5
movrz $t1,$acc2,$acc0
movrz $t1,$acc3,$acc1
movrz $t2,$acc4,$acc0
movrz $t2,$acc5,$acc1
srlx $acc0,32,$acc2
srlx $acc1,32,$acc3
st $acc0,[$rp_real+$i]
st $acc2,[$rp_real+$i+4]
st $acc1,[$rp_real+$i+8]
st $acc3,[$rp_real+$i+12]
___
}
$code.=<<___;
ret
restore
.type ecp_nistz256_point_add_affine_vis3,#function
.size ecp_nistz256_point_add_affine_vis3,.-ecp_nistz256_point_add_affine_vis3
.align 64
.Lone_mont_vis3:
.long 0x00000000,0x00000001, 0xffffffff,0x00000000
.long 0xffffffff,0xffffffff, 0x00000000,0xfffffffe
.align 64
___
} }}}
# Purpose of these subroutines is to explicitly encode VIS instructions,
# so that one can compile the module without having to specify VIS
# extensions on compiler command line, e.g. -xarch=v9 vs. -xarch=v9a.
# Idea is to reserve for option to produce "universal" binary and let
# programmer detect if current CPU is VIS capable at run-time.
sub unvis3 {
my ($mnemonic,$rs1,$rs2,$rd)=@_;
my %bias = ( "g" => 0, "o" => 8, "l" => 16, "i" => 24 );
my ($ref,$opf);
my %visopf = ( "addxc" => 0x011,
"addxccc" => 0x013,
"umulxhi" => 0x016 );
$ref = "$mnemonic\t$rs1,$rs2,$rd";
if ($opf=$visopf{$mnemonic}) {
foreach ($rs1,$rs2,$rd) {
return $ref if (!/%([goli])([0-9])/);
$_=$bias{$1}+$2;
}
return sprintf ".word\t0x%08x !%s",
0x81b00000|$rd<<25|$rs1<<14|$opf<<5|$rs2,
$ref;
} else {
return $ref;
}
}
foreach (split("\n",$code)) {
s/\`([^\`]*)\`/eval $1/ge;
s/\b(umulxhi|addxc[c]{0,2})\s+(%[goli][0-7]),\s*(%[goli][0-7]),\s*(%[goli][0-7])/
&unvis3($1,$2,$3,$4)
/ge;
print $_,"\n";
}
close STDOUT;