openssl/apps/s_client.c
2011-03-16 11:26:40 +00:00

1966 lines
53 KiB
C

/* apps/s_client.c */
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
* All rights reserved.
*
* This package is an SSL implementation written
* by Eric Young (eay@cryptsoft.com).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson (tjh@cryptsoft.com).
*
* Copyright remains Eric Young's, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at program startup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* "This product includes cryptographic software written by
* Eric Young (eay@cryptsoft.com)"
* The word 'cryptographic' can be left out if the rouines from the library
* being used are not cryptographic related :-).
* 4. If you include any Windows specific code (or a derivative thereof) from
* the apps directory (application code) you must include an acknowledgement:
* "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/
/* ====================================================================
* Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* openssl-core@openssl.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.openssl.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com).
*
*/
/* ====================================================================
* Copyright 2005 Nokia. All rights reserved.
*
* The portions of the attached software ("Contribution") is developed by
* Nokia Corporation and is licensed pursuant to the OpenSSL open source
* license.
*
* The Contribution, originally written by Mika Kousa and Pasi Eronen of
* Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites
* support (see RFC 4279) to OpenSSL.
*
* No patent licenses or other rights except those expressly stated in
* the OpenSSL open source license shall be deemed granted or received
* expressly, by implication, estoppel, or otherwise.
*
* No assurances are provided by Nokia that the Contribution does not
* infringe the patent or other intellectual property rights of any third
* party or that the license provides you with all the necessary rights
* to make use of the Contribution.
*
* THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN
* ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA
* SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY
* OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR
* OTHERWISE.
*/
#include <assert.h>
#include <ctype.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <openssl/e_os2.h>
#ifdef OPENSSL_NO_STDIO
#define APPS_WIN16
#endif
/* With IPv6, it looks like Digital has mixed up the proper order of
recursive header file inclusion, resulting in the compiler complaining
that u_int isn't defined, but only if _POSIX_C_SOURCE is defined, which
is needed to have fileno() declared correctly... So let's define u_int */
#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__U_INT)
#define __U_INT
typedef unsigned int u_int;
#endif
#define USE_SOCKETS
#include "apps.h"
#include <openssl/x509.h>
#include <openssl/ssl.h>
#include <openssl/err.h>
#include <openssl/pem.h>
#include <openssl/rand.h>
#include <openssl/ocsp.h>
#include <openssl/bn.h>
#ifndef OPENSSL_NO_SRP
#include <openssl/srp.h>
#endif
#include "s_apps.h"
#include "timeouts.h"
#if (defined(OPENSSL_SYS_VMS) && __VMS_VER < 70000000)
/* FIONBIO used as a switch to enable ioctl, and that isn't in VMS < 7.0 */
#undef FIONBIO
#endif
#if defined(OPENSSL_SYS_BEOS_R5)
#include <fcntl.h>
#endif
#undef PROG
#define PROG s_client_main
/*#define SSL_HOST_NAME "www.netscape.com" */
/*#define SSL_HOST_NAME "193.118.187.102" */
#define SSL_HOST_NAME "localhost"
/*#define TEST_CERT "client.pem" */ /* no default cert. */
#undef BUFSIZZ
#define BUFSIZZ 1024*8
extern int verify_depth;
extern int verify_error;
extern int verify_return_error;
#ifdef FIONBIO
static int c_nbio=0;
#endif
static int c_Pause=0;
static int c_debug=0;
#ifndef OPENSSL_NO_TLSEXT
static int c_tlsextdebug=0;
static int c_status_req=0;
#endif
static int c_msg=0;
static int c_showcerts=0;
static void sc_usage(void);
static void print_stuff(BIO *berr,SSL *con,int full);
#ifndef OPENSSL_NO_TLSEXT
static int ocsp_resp_cb(SSL *s, void *arg);
#endif
static BIO *bio_c_out=NULL;
static int c_quiet=0;
static int c_ign_eof=0;
#ifndef OPENSSL_NO_PSK
/* Default PSK identity and key */
static char *psk_identity="Client_identity";
/*char *psk_key=NULL; by default PSK is not used */
static unsigned int psk_client_cb(SSL *ssl, const char *hint, char *identity,
unsigned int max_identity_len, unsigned char *psk,
unsigned int max_psk_len)
{
unsigned int psk_len = 0;
int ret;
BIGNUM *bn=NULL;
if (c_debug)
BIO_printf(bio_c_out, "psk_client_cb\n");
if (!hint)
{
/* no ServerKeyExchange message*/
if (c_debug)
BIO_printf(bio_c_out,"NULL received PSK identity hint, continuing anyway\n");
}
else if (c_debug)
BIO_printf(bio_c_out, "Received PSK identity hint '%s'\n", hint);
/* lookup PSK identity and PSK key based on the given identity hint here */
ret = BIO_snprintf(identity, max_identity_len, "%s", psk_identity);
if (ret < 0 || (unsigned int)ret > max_identity_len)
goto out_err;
if (c_debug)
BIO_printf(bio_c_out, "created identity '%s' len=%d\n", identity, ret);
ret=BN_hex2bn(&bn, psk_key);
if (!ret)
{
BIO_printf(bio_err,"Could not convert PSK key '%s' to BIGNUM\n", psk_key);
if (bn)
BN_free(bn);
return 0;
}
if ((unsigned int)BN_num_bytes(bn) > max_psk_len)
{
BIO_printf(bio_err,"psk buffer of callback is too small (%d) for key (%d)\n",
max_psk_len, BN_num_bytes(bn));
BN_free(bn);
return 0;
}
psk_len=BN_bn2bin(bn, psk);
BN_free(bn);
if (psk_len == 0)
goto out_err;
if (c_debug)
BIO_printf(bio_c_out, "created PSK len=%d\n", psk_len);
return psk_len;
out_err:
if (c_debug)
BIO_printf(bio_err, "Error in PSK client callback\n");
return 0;
}
#endif
static void sc_usage(void)
{
BIO_printf(bio_err,"usage: s_client args\n");
BIO_printf(bio_err,"\n");
BIO_printf(bio_err," -host host - use -connect instead\n");
BIO_printf(bio_err," -port port - use -connect instead\n");
BIO_printf(bio_err," -connect host:port - who to connect to (default is %s:%s)\n",SSL_HOST_NAME,PORT_STR);
BIO_printf(bio_err," -verify arg - turn on peer certificate verification\n");
BIO_printf(bio_err," -cert arg - certificate file to use, PEM format assumed\n");
BIO_printf(bio_err," -certform arg - certificate format (PEM or DER) PEM default\n");
BIO_printf(bio_err," -key arg - Private key file to use, in cert file if\n");
BIO_printf(bio_err," not specified but cert file is.\n");
BIO_printf(bio_err," -keyform arg - key format (PEM or DER) PEM default\n");
BIO_printf(bio_err," -pass arg - private key file pass phrase source\n");
BIO_printf(bio_err," -CApath arg - PEM format directory of CA's\n");
BIO_printf(bio_err," -CAfile arg - PEM format file of CA's\n");
BIO_printf(bio_err," -reconnect - Drop and re-make the connection with the same Session-ID\n");
BIO_printf(bio_err," -pause - sleep(1) after each read(2) and write(2) system call\n");
BIO_printf(bio_err," -showcerts - show all certificates in the chain\n");
BIO_printf(bio_err," -debug - extra output\n");
#ifdef WATT32
BIO_printf(bio_err," -wdebug - WATT-32 tcp debugging\n");
#endif
BIO_printf(bio_err," -msg - Show protocol messages\n");
BIO_printf(bio_err," -nbio_test - more ssl protocol testing\n");
BIO_printf(bio_err," -state - print the 'ssl' states\n");
#ifdef FIONBIO
BIO_printf(bio_err," -nbio - Run with non-blocking IO\n");
#endif
BIO_printf(bio_err," -crlf - convert LF from terminal into CRLF\n");
BIO_printf(bio_err," -quiet - no s_client output\n");
BIO_printf(bio_err," -ign_eof - ignore input eof (default when -quiet)\n");
BIO_printf(bio_err," -no_ign_eof - don't ignore input eof\n");
#ifndef OPENSSL_NO_PSK
BIO_printf(bio_err," -psk_identity arg - PSK identity\n");
BIO_printf(bio_err," -psk arg - PSK in hex (without 0x)\n");
# ifndef OPENSSL_NO_JPAKE
BIO_printf(bio_err," -jpake arg - JPAKE secret to use\n");
# endif
#endif
#ifndef OPENSSL_NO_SRP
BIO_printf(bio_err," -srpuser user - SRP authentification for 'user'\n");
BIO_printf(bio_err," -srppass arg - password for 'user'\n");
BIO_printf(bio_err," -srp_lateuser - SRP username into second ClientHello message\n");
BIO_printf(bio_err," -srp_moregroups - Tolerate other than the known g N values.\n");
BIO_printf(bio_err," -srp_strength int - minimal mength in bits for N (default %d).\n",SRP_MINIMAL_N);
#endif
BIO_printf(bio_err," -ssl2 - just use SSLv2\n");
BIO_printf(bio_err," -ssl3 - just use SSLv3\n");
BIO_printf(bio_err," -tls1_1 - just use TLSv1.1\n");
BIO_printf(bio_err," -tls1 - just use TLSv1\n");
BIO_printf(bio_err," -dtls1 - just use DTLSv1\n");
BIO_printf(bio_err," -mtu - set the link layer MTU\n");
BIO_printf(bio_err," -no_tls1_1/-no_tls1/-no_ssl3/-no_ssl2 - turn off that protocol\n");
BIO_printf(bio_err," -bugs - Switch on all SSL implementation bug workarounds\n");
BIO_printf(bio_err," -serverpref - Use server's cipher preferences (only SSLv2)\n");
BIO_printf(bio_err," -cipher - preferred cipher to use, use the 'openssl ciphers'\n");
BIO_printf(bio_err," command to see what is available\n");
BIO_printf(bio_err," -starttls prot - use the STARTTLS command before starting TLS\n");
BIO_printf(bio_err," for those protocols that support it, where\n");
BIO_printf(bio_err," 'prot' defines which one to assume. Currently,\n");
BIO_printf(bio_err," only \"smtp\", \"pop3\", \"imap\", \"ftp\" and \"xmpp\"\n");
BIO_printf(bio_err," are supported.\n");
#ifndef OPENSSL_NO_ENGINE
BIO_printf(bio_err," -engine id - Initialise and use the specified engine\n");
#endif
BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
BIO_printf(bio_err," -sess_out arg - file to write SSL session to\n");
BIO_printf(bio_err," -sess_in arg - file to read SSL session from\n");
#ifndef OPENSSL_NO_TLSEXT
BIO_printf(bio_err," -servername host - Set TLS extension servername in ClientHello\n");
BIO_printf(bio_err," -tlsextdebug - hex dump of all TLS extensions received\n");
BIO_printf(bio_err," -status - request certificate status from server\n");
BIO_printf(bio_err," -no_ticket - disable use of RFC4507bis session tickets\n");
#endif
BIO_printf(bio_err," -legacy_renegotiation - enable use of legacy renegotiation (dangerous)\n");
}
#ifndef OPENSSL_NO_TLSEXT
/* This is a context that we pass to callbacks */
typedef struct tlsextctx_st {
BIO * biodebug;
int ack;
} tlsextctx;
static int MS_CALLBACK ssl_servername_cb(SSL *s, int *ad, void *arg)
{
tlsextctx * p = (tlsextctx *) arg;
const char * hn= SSL_get_servername(s, TLSEXT_NAMETYPE_host_name);
if (SSL_get_servername_type(s) != -1)
p->ack = !SSL_session_reused(s) && hn != NULL;
else
BIO_printf(bio_err,"Can't use SSL_get_servername\n");
return SSL_TLSEXT_ERR_OK;
}
#ifndef OPENSSL_NO_SRP
/* This is a context that we pass to all callbacks */
typedef struct srp_arg_st
{
char *srppassin;
char *srplogin;
int msg; /* copy from c_msg */
int debug; /* copy from c_debug */
int amp; /* allow more groups */
int strength /* minimal size for N */ ;
} SRP_ARG;
#define SRP_NUMBER_ITERATIONS_FOR_PRIME 64
static int SRP_Verify_N_and_g(BIGNUM *N, BIGNUM *g)
{
BN_CTX *bn_ctx = BN_CTX_new();
BIGNUM *p = BN_new();
BIGNUM *r = BN_new();
int ret =
g != NULL && N != NULL && bn_ctx != NULL && BN_is_odd(N) &&
BN_is_prime_ex(N, SRP_NUMBER_ITERATIONS_FOR_PRIME, bn_ctx, NULL) &&
p != NULL && BN_rshift1(p, N) &&
/* p = (N-1)/2 */
BN_is_prime_ex(p, SRP_NUMBER_ITERATIONS_FOR_PRIME, bn_ctx, NULL) &&
r != NULL &&
/* verify g^((N-1)/2) == -1 (mod N) */
BN_mod_exp(r, g, p, N, bn_ctx) &&
BN_add_word(r, 1) &&
BN_cmp(r, N) == 0;
if(r)
BN_free(r);
if(p)
BN_free(p);
if(bn_ctx)
BN_CTX_free(bn_ctx);
return ret;
}
static int MS_CALLBACK ssl_srp_verify_param_cb(SSL *s, void *arg)
{
SRP_ARG *srp_arg = (SRP_ARG *)arg;
BIGNUM *N = NULL, *g = NULL;
if (!(N = SSL_get_srp_N(s)) || !(g = SSL_get_srp_g(s)))
return 0;
if (srp_arg->debug || srp_arg->msg || srp_arg->amp == 1)
{
BIO_printf(bio_err, "SRP parameters:\n");
BIO_printf(bio_err,"\tN="); BN_print(bio_err,N);
BIO_printf(bio_err,"\n\tg="); BN_print(bio_err,g);
BIO_printf(bio_err,"\n");
}
if (SRP_check_known_gN_param(g,N))
return 1;
if (srp_arg->amp == 1)
{
if (srp_arg->debug)
BIO_printf(bio_err, "SRP param N and g are not known params, going to check deeper.\n");
/* The srp_moregroups must be used with caution, testing primes costs time.
Implementors should rather add the value to the known ones.
The minimal size has already been tested.
*/
if (BN_num_bits(g) <= BN_BITS && SRP_Verify_N_and_g(N,g))
return 1;
}
BIO_printf(bio_err, "SRP param N and g rejected.\n");
return 0;
}
#define PWD_STRLEN 1024
static char * MS_CALLBACK ssl_give_srp_client_pwd_cb(SSL *s, void *arg)
{
SRP_ARG *srp_arg = (SRP_ARG *)arg;
char *pass = (char *)OPENSSL_malloc(PWD_STRLEN+1);
PW_CB_DATA cb_tmp;
int l;
cb_tmp.password = (char *)srp_arg->srppassin;
cb_tmp.prompt_info = "SRP user";
if ((l = password_callback(pass, PWD_STRLEN, 0, &cb_tmp))<0)
{
BIO_printf (bio_err, "Can't read Password\n");
OPENSSL_free(pass);
return NULL;
}
*(pass+l)= '\0';
return pass;
}
static char * MS_CALLBACK missing_srp_username_callback(SSL *s, void *arg)
{
SRP_ARG *srp_arg = (SRP_ARG *)arg;
return BUF_strdup(srp_arg->srplogin);
}
#endif
#endif
enum
{
PROTO_OFF = 0,
PROTO_SMTP,
PROTO_POP3,
PROTO_IMAP,
PROTO_FTP,
PROTO_XMPP
};
int MAIN(int, char **);
int MAIN(int argc, char **argv)
{
unsigned int off=0, clr=0;
SSL *con=NULL;
int s,k,width,state=0;
char *cbuf=NULL,*sbuf=NULL,*mbuf=NULL;
int cbuf_len,cbuf_off;
int sbuf_len,sbuf_off;
fd_set readfds,writefds;
short port=PORT;
int full_log=1;
char *host=SSL_HOST_NAME;
char *cert_file=NULL,*key_file=NULL;
int cert_format = FORMAT_PEM, key_format = FORMAT_PEM;
char *passarg = NULL, *pass = NULL;
X509 *cert = NULL;
EVP_PKEY *key = NULL;
char *CApath=NULL,*CAfile=NULL,*cipher=NULL;
int reconnect=0,badop=0,verify=SSL_VERIFY_NONE,bugs=0;
int crlf=0;
int write_tty,read_tty,write_ssl,read_ssl,tty_on,ssl_pending;
SSL_CTX *ctx=NULL;
int ret=1,in_init=1,i,nbio_test=0;
int starttls_proto = PROTO_OFF;
int prexit = 0;
X509_VERIFY_PARAM *vpm = NULL;
int badarg = 0;
const SSL_METHOD *meth=NULL;
int socket_type=SOCK_STREAM;
BIO *sbio;
char *inrand=NULL;
int mbuf_len=0;
struct timeval timeout, *timeoutp;
#ifndef OPENSSL_NO_ENGINE
char *engine_id=NULL;
char *ssl_client_engine_id=NULL;
ENGINE *ssl_client_engine=NULL;
#endif
ENGINE *e=NULL;
#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE) || defined(OPENSSL_SYS_BEOS_R5)
struct timeval tv;
#if defined(OPENSSL_SYS_BEOS_R5)
int stdin_set = 0;
#endif
#endif
#ifndef OPENSSL_NO_TLSEXT
char *servername = NULL;
tlsextctx tlsextcbp =
{NULL,0};
#endif
char *sess_in = NULL;
char *sess_out = NULL;
struct sockaddr peer;
int peerlen = sizeof(peer);
int enable_timeouts = 0 ;
long socket_mtu = 0;
#ifndef OPENSSL_NO_JPAKE
char *jpake_secret = NULL;
#endif
#ifndef OPENSSL_NO_SRP
char * srppass = NULL;
int srp_lateuser = 0;
SRP_ARG srp_arg = {NULL,NULL,0,0,0,1024};
#endif
#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
meth=SSLv23_client_method();
#elif !defined(OPENSSL_NO_SSL3)
meth=SSLv3_client_method();
#elif !defined(OPENSSL_NO_SSL2)
meth=SSLv2_client_method();
#endif
apps_startup();
c_Pause=0;
c_quiet=0;
c_ign_eof=0;
c_debug=0;
c_msg=0;
c_showcerts=0;
if (bio_err == NULL)
bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
if (!load_config(bio_err, NULL))
goto end;
if ( ((cbuf=OPENSSL_malloc(BUFSIZZ)) == NULL) ||
((sbuf=OPENSSL_malloc(BUFSIZZ)) == NULL) ||
((mbuf=OPENSSL_malloc(BUFSIZZ)) == NULL))
{
BIO_printf(bio_err,"out of memory\n");
goto end;
}
verify_depth=0;
verify_error=X509_V_OK;
#ifdef FIONBIO
c_nbio=0;
#endif
argc--;
argv++;
while (argc >= 1)
{
if (strcmp(*argv,"-host") == 0)
{
if (--argc < 1) goto bad;
host= *(++argv);
}
else if (strcmp(*argv,"-port") == 0)
{
if (--argc < 1) goto bad;
port=atoi(*(++argv));
if (port == 0) goto bad;
}
else if (strcmp(*argv,"-connect") == 0)
{
if (--argc < 1) goto bad;
if (!extract_host_port(*(++argv),&host,NULL,&port))
goto bad;
}
else if (strcmp(*argv,"-verify") == 0)
{
verify=SSL_VERIFY_PEER;
if (--argc < 1) goto bad;
verify_depth=atoi(*(++argv));
BIO_printf(bio_err,"verify depth is %d\n",verify_depth);
}
else if (strcmp(*argv,"-cert") == 0)
{
if (--argc < 1) goto bad;
cert_file= *(++argv);
}
else if (strcmp(*argv,"-sess_out") == 0)
{
if (--argc < 1) goto bad;
sess_out = *(++argv);
}
else if (strcmp(*argv,"-sess_in") == 0)
{
if (--argc < 1) goto bad;
sess_in = *(++argv);
}
else if (strcmp(*argv,"-certform") == 0)
{
if (--argc < 1) goto bad;
cert_format = str2fmt(*(++argv));
}
else if (args_verify(&argv, &argc, &badarg, bio_err, &vpm))
{
if (badarg)
goto bad;
continue;
}
else if (strcmp(*argv,"-verify_return_error") == 0)
verify_return_error = 1;
else if (strcmp(*argv,"-prexit") == 0)
prexit=1;
else if (strcmp(*argv,"-crlf") == 0)
crlf=1;
else if (strcmp(*argv,"-quiet") == 0)
{
c_quiet=1;
c_ign_eof=1;
}
else if (strcmp(*argv,"-ign_eof") == 0)
c_ign_eof=1;
else if (strcmp(*argv,"-no_ign_eof") == 0)
c_ign_eof=0;
else if (strcmp(*argv,"-pause") == 0)
c_Pause=1;
else if (strcmp(*argv,"-debug") == 0)
c_debug=1;
#ifndef OPENSSL_NO_TLSEXT
else if (strcmp(*argv,"-tlsextdebug") == 0)
c_tlsextdebug=1;
else if (strcmp(*argv,"-status") == 0)
c_status_req=1;
#endif
#ifdef WATT32
else if (strcmp(*argv,"-wdebug") == 0)
dbug_init();
#endif
else if (strcmp(*argv,"-msg") == 0)
c_msg=1;
else if (strcmp(*argv,"-showcerts") == 0)
c_showcerts=1;
else if (strcmp(*argv,"-nbio_test") == 0)
nbio_test=1;
else if (strcmp(*argv,"-state") == 0)
state=1;
#ifndef OPENSSL_NO_PSK
else if (strcmp(*argv,"-psk_identity") == 0)
{
if (--argc < 1) goto bad;
psk_identity=*(++argv);
}
else if (strcmp(*argv,"-psk") == 0)
{
size_t j;
if (--argc < 1) goto bad;
psk_key=*(++argv);
for (j = 0; j < strlen(psk_key); j++)
{
if (isxdigit((int)psk_key[j]))
continue;
BIO_printf(bio_err,"Not a hex number '%s'\n",*argv);
goto bad;
}
}
#endif
#ifndef OPENSSL_NO_SRP
else if (strcmp(*argv,"-srpuser") == 0)
{
if (--argc < 1) goto bad;
srp_arg.srplogin= *(++argv);
meth=TLSv1_client_method();
}
else if (strcmp(*argv,"-srppass") == 0)
{
if (--argc < 1) goto bad;
srppass= *(++argv);
meth=TLSv1_client_method();
}
else if (strcmp(*argv,"-srp_strength") == 0)
{
if (--argc < 1) goto bad;
srp_arg.strength=atoi(*(++argv));
BIO_printf(bio_err,"SRP minimal length for N is %d\n",srp_arg.strength);
meth=TLSv1_client_method();
}
else if (strcmp(*argv,"-srp_lateuser") == 0)
{
srp_lateuser= 1;
meth=TLSv1_client_method();
}
else if (strcmp(*argv,"-srp_moregroups") == 0)
{
srp_arg.amp=1;
meth=TLSv1_client_method();
}
#endif
#ifndef OPENSSL_NO_SSL2
else if (strcmp(*argv,"-ssl2") == 0)
meth=SSLv2_client_method();
#endif
#ifndef OPENSSL_NO_SSL3
else if (strcmp(*argv,"-ssl3") == 0)
meth=SSLv3_client_method();
#endif
#ifndef OPENSSL_NO_TLS1
else if (strcmp(*argv,"-tls1_1") == 0)
meth=TLSv1_1_client_method();
else if (strcmp(*argv,"-tls1") == 0)
meth=TLSv1_client_method();
#endif
#ifndef OPENSSL_NO_DTLS1
else if (strcmp(*argv,"-dtls1") == 0)
{
meth=DTLSv1_client_method();
socket_type=SOCK_DGRAM;
}
else if (strcmp(*argv,"-timeout") == 0)
enable_timeouts=1;
else if (strcmp(*argv,"-mtu") == 0)
{
if (--argc < 1) goto bad;
socket_mtu = atol(*(++argv));
}
#endif
else if (strcmp(*argv,"-bugs") == 0)
bugs=1;
else if (strcmp(*argv,"-keyform") == 0)
{
if (--argc < 1) goto bad;
key_format = str2fmt(*(++argv));
}
else if (strcmp(*argv,"-pass") == 0)
{
if (--argc < 1) goto bad;
passarg = *(++argv);
}
else if (strcmp(*argv,"-key") == 0)
{
if (--argc < 1) goto bad;
key_file= *(++argv);
}
else if (strcmp(*argv,"-reconnect") == 0)
{
reconnect=5;
}
else if (strcmp(*argv,"-CApath") == 0)
{
if (--argc < 1) goto bad;
CApath= *(++argv);
}
else if (strcmp(*argv,"-CAfile") == 0)
{
if (--argc < 1) goto bad;
CAfile= *(++argv);
}
else if (strcmp(*argv,"-no_tls1_1") == 0)
off|=SSL_OP_NO_TLSv1_1;
else if (strcmp(*argv,"-no_tls1") == 0)
off|=SSL_OP_NO_TLSv1;
else if (strcmp(*argv,"-no_ssl3") == 0)
off|=SSL_OP_NO_SSLv3;
else if (strcmp(*argv,"-no_ssl2") == 0)
off|=SSL_OP_NO_SSLv2;
else if (strcmp(*argv,"-no_comp") == 0)
{ off|=SSL_OP_NO_COMPRESSION; }
#ifndef OPENSSL_NO_TLSEXT
else if (strcmp(*argv,"-no_ticket") == 0)
{ off|=SSL_OP_NO_TICKET; }
#endif
else if (strcmp(*argv,"-serverpref") == 0)
off|=SSL_OP_CIPHER_SERVER_PREFERENCE;
else if (strcmp(*argv,"-legacy_renegotiation") == 0)
off|=SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION;
else if (strcmp(*argv,"-legacy_server_connect") == 0)
{ off|=SSL_OP_LEGACY_SERVER_CONNECT; }
else if (strcmp(*argv,"-no_legacy_server_connect") == 0)
{ clr|=SSL_OP_LEGACY_SERVER_CONNECT; }
else if (strcmp(*argv,"-cipher") == 0)
{
if (--argc < 1) goto bad;
cipher= *(++argv);
}
#ifdef FIONBIO
else if (strcmp(*argv,"-nbio") == 0)
{ c_nbio=1; }
#endif
else if (strcmp(*argv,"-starttls") == 0)
{
if (--argc < 1) goto bad;
++argv;
if (strcmp(*argv,"smtp") == 0)
starttls_proto = PROTO_SMTP;
else if (strcmp(*argv,"pop3") == 0)
starttls_proto = PROTO_POP3;
else if (strcmp(*argv,"imap") == 0)
starttls_proto = PROTO_IMAP;
else if (strcmp(*argv,"ftp") == 0)
starttls_proto = PROTO_FTP;
else if (strcmp(*argv, "xmpp") == 0)
starttls_proto = PROTO_XMPP;
else
goto bad;
}
#ifndef OPENSSL_NO_ENGINE
else if (strcmp(*argv,"-engine") == 0)
{
if (--argc < 1) goto bad;
engine_id = *(++argv);
}
else if (strcmp(*argv,"-ssl_client_engine") == 0)
{
if (--argc < 1) goto bad;
ssl_client_engine_id = *(++argv);
}
#endif
else if (strcmp(*argv,"-rand") == 0)
{
if (--argc < 1) goto bad;
inrand= *(++argv);
}
#ifndef OPENSSL_NO_TLSEXT
else if (strcmp(*argv,"-servername") == 0)
{
if (--argc < 1) goto bad;
servername= *(++argv);
/* meth=TLSv1_client_method(); */
}
#endif
#ifndef OPENSSL_NO_JPAKE
else if (strcmp(*argv,"-jpake") == 0)
{
if (--argc < 1) goto bad;
jpake_secret = *++argv;
}
#endif
else
{
BIO_printf(bio_err,"unknown option %s\n",*argv);
badop=1;
break;
}
argc--;
argv++;
}
if (badop)
{
bad:
sc_usage();
goto end;
}
#if !defined(OPENSSL_NO_JPAKE) && !defined(OPENSSL_NO_PSK)
if (jpake_secret)
{
if (psk_key)
{
BIO_printf(bio_err,
"Can't use JPAKE and PSK together\n");
goto end;
}
psk_identity = "JPAKE";
}
if (cipher)
{
BIO_printf(bio_err, "JPAKE sets cipher to PSK\n");
goto end;
}
cipher = "PSK";
#endif
OpenSSL_add_ssl_algorithms();
SSL_load_error_strings();
#ifndef OPENSSL_NO_ENGINE
e = setup_engine(bio_err, engine_id, 1);
if (ssl_client_engine_id)
{
ssl_client_engine = ENGINE_by_id(ssl_client_engine_id);
if (!ssl_client_engine)
{
BIO_printf(bio_err,
"Error getting client auth engine\n");
goto end;
}
}
#endif
if (!app_passwd(bio_err, passarg, NULL, &pass, NULL))
{
BIO_printf(bio_err, "Error getting password\n");
goto end;
}
if (key_file == NULL)
key_file = cert_file;
if (key_file)
{
key = load_key(bio_err, key_file, key_format, 0, pass, e,
"client certificate private key file");
if (!key)
{
ERR_print_errors(bio_err);
goto end;
}
}
if (cert_file)
{
cert = load_cert(bio_err,cert_file,cert_format,
NULL, e, "client certificate file");
if (!cert)
{
ERR_print_errors(bio_err);
goto end;
}
}
if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
&& !RAND_status())
{
BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n");
}
if (inrand != NULL)
BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
app_RAND_load_files(inrand));
if (bio_c_out == NULL)
{
if (c_quiet && !c_debug && !c_msg)
{
bio_c_out=BIO_new(BIO_s_null());
}
else
{
if (bio_c_out == NULL)
bio_c_out=BIO_new_fp(stdout,BIO_NOCLOSE);
}
}
#ifndef OPENSSL_NO_SRP
if(!app_passwd(bio_err, srppass, NULL, &srp_arg.srppassin, NULL))
{
BIO_printf(bio_err, "Error getting password\n");
goto end;
}
#endif
ctx=SSL_CTX_new(meth);
if (ctx == NULL)
{
ERR_print_errors(bio_err);
goto end;
}
if (vpm)
SSL_CTX_set1_param(ctx, vpm);
#ifndef OPENSSL_NO_ENGINE
if (ssl_client_engine)
{
if (!SSL_CTX_set_client_cert_engine(ctx, ssl_client_engine))
{
BIO_puts(bio_err, "Error setting client auth engine\n");
ERR_print_errors(bio_err);
ENGINE_free(ssl_client_engine);
goto end;
}
ENGINE_free(ssl_client_engine);
}
#endif
#ifndef OPENSSL_NO_PSK
#ifdef OPENSSL_NO_JPAKE
if (psk_key != NULL)
#else
if (psk_key != NULL || jpake_secret)
#endif
{
if (c_debug)
BIO_printf(bio_c_out, "PSK key given or JPAKE in use, setting client callback\n");
SSL_CTX_set_psk_client_callback(ctx, psk_client_cb);
}
#endif
if (bugs)
SSL_CTX_set_options(ctx,SSL_OP_ALL|off);
else
SSL_CTX_set_options(ctx,off);
if (clr)
SSL_CTX_clear_options(ctx, clr);
/* DTLS: partial reads end up discarding unread UDP bytes :-(
* Setting read ahead solves this problem.
*/
if (socket_type == SOCK_DGRAM) SSL_CTX_set_read_ahead(ctx, 1);
if (state) SSL_CTX_set_info_callback(ctx,apps_ssl_info_callback);
if (cipher != NULL)
if(!SSL_CTX_set_cipher_list(ctx,cipher)) {
BIO_printf(bio_err,"error setting cipher list\n");
ERR_print_errors(bio_err);
goto end;
}
#if 0
else
SSL_CTX_set_cipher_list(ctx,getenv("SSL_CIPHER"));
#endif
SSL_CTX_set_verify(ctx,verify,verify_callback);
if (!set_cert_key_stuff(ctx,cert,key))
goto end;
if ((!SSL_CTX_load_verify_locations(ctx,CAfile,CApath)) ||
(!SSL_CTX_set_default_verify_paths(ctx)))
{
/* BIO_printf(bio_err,"error setting default verify locations\n"); */
ERR_print_errors(bio_err);
/* goto end; */
}
#ifndef OPENSSL_NO_TLSEXT
if (servername != NULL)
{
tlsextcbp.biodebug = bio_err;
SSL_CTX_set_tlsext_servername_callback(ctx, ssl_servername_cb);
SSL_CTX_set_tlsext_servername_arg(ctx, &tlsextcbp);
}
#ifndef OPENSSL_NO_SRP
if (srp_arg.srplogin)
{
if (srp_lateuser)
SSL_CTX_set_srp_missing_srp_username_callback(ctx,missing_srp_username_callback);
else if (!SSL_CTX_set_srp_username(ctx, srp_arg.srplogin))
{
BIO_printf(bio_err,"Unable to set SRP username\n");
goto end;
}
srp_arg.msg = c_msg;
srp_arg.debug = c_debug ;
SSL_CTX_set_srp_cb_arg(ctx,&srp_arg);
SSL_CTX_set_srp_client_pwd_callback(ctx, ssl_give_srp_client_pwd_cb);
SSL_CTX_set_srp_strength(ctx, srp_arg.strength);
if (c_msg || c_debug || srp_arg.amp == 0)
SSL_CTX_set_srp_verify_param_callback(ctx, ssl_srp_verify_param_cb);
}
#endif
#endif
con=SSL_new(ctx);
if (sess_in)
{
SSL_SESSION *sess;
BIO *stmp = BIO_new_file(sess_in, "r");
if (!stmp)
{
BIO_printf(bio_err, "Can't open session file %s\n",
sess_in);
ERR_print_errors(bio_err);
goto end;
}
sess = PEM_read_bio_SSL_SESSION(stmp, NULL, 0, NULL);
BIO_free(stmp);
if (!sess)
{
BIO_printf(bio_err, "Can't open session file %s\n",
sess_in);
ERR_print_errors(bio_err);
goto end;
}
SSL_set_session(con, sess);
SSL_SESSION_free(sess);
}
#ifndef OPENSSL_NO_TLSEXT
if (servername != NULL)
{
if (!SSL_set_tlsext_host_name(con,servername))
{
BIO_printf(bio_err,"Unable to set TLS servername extension.\n");
ERR_print_errors(bio_err);
goto end;
}
}
#endif
#ifndef OPENSSL_NO_KRB5
if (con && (con->kssl_ctx = kssl_ctx_new()) != NULL)
{
kssl_ctx_setstring(con->kssl_ctx, KSSL_SERVER, host);
}
#endif /* OPENSSL_NO_KRB5 */
/* SSL_set_cipher_list(con,"RC4-MD5"); */
#if 0
#ifdef TLSEXT_TYPE_opaque_prf_input
SSL_set_tlsext_opaque_prf_input(con, "Test client", 11);
#endif
#endif
re_start:
if (init_client(&s,host,port,socket_type) == 0)
{
BIO_printf(bio_err,"connect:errno=%d\n",get_last_socket_error());
SHUTDOWN(s);
goto end;
}
BIO_printf(bio_c_out,"CONNECTED(%08X)\n",s);
#ifdef FIONBIO
if (c_nbio)
{
unsigned long l=1;
BIO_printf(bio_c_out,"turning on non blocking io\n");
if (BIO_socket_ioctl(s,FIONBIO,&l) < 0)
{
ERR_print_errors(bio_err);
goto end;
}
}
#endif
if (c_Pause & 0x01) con->debug=1;
if ( SSL_version(con) == DTLS1_VERSION)
{
sbio=BIO_new_dgram(s,BIO_NOCLOSE);
if (getsockname(s, &peer, (void *)&peerlen) < 0)
{
BIO_printf(bio_err, "getsockname:errno=%d\n",
get_last_socket_error());
SHUTDOWN(s);
goto end;
}
(void)BIO_ctrl_set_connected(sbio, 1, &peer);
if (enable_timeouts)
{
timeout.tv_sec = 0;
timeout.tv_usec = DGRAM_RCV_TIMEOUT;
BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_RECV_TIMEOUT, 0, &timeout);
timeout.tv_sec = 0;
timeout.tv_usec = DGRAM_SND_TIMEOUT;
BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_SEND_TIMEOUT, 0, &timeout);
}
if (socket_mtu > 28)
{
SSL_set_options(con, SSL_OP_NO_QUERY_MTU);
SSL_set_mtu(con, socket_mtu - 28);
}
else
/* want to do MTU discovery */
BIO_ctrl(sbio, BIO_CTRL_DGRAM_MTU_DISCOVER, 0, NULL);
}
else
sbio=BIO_new_socket(s,BIO_NOCLOSE);
if (nbio_test)
{
BIO *test;
test=BIO_new(BIO_f_nbio_test());
sbio=BIO_push(test,sbio);
}
if (c_debug)
{
con->debug=1;
BIO_set_callback(sbio,bio_dump_callback);
BIO_set_callback_arg(sbio,(char *)bio_c_out);
}
if (c_msg)
{
SSL_set_msg_callback(con, msg_cb);
SSL_set_msg_callback_arg(con, bio_c_out);
}
#ifndef OPENSSL_NO_TLSEXT
if (c_tlsextdebug)
{
SSL_set_tlsext_debug_callback(con, tlsext_cb);
SSL_set_tlsext_debug_arg(con, bio_c_out);
}
if (c_status_req)
{
SSL_set_tlsext_status_type(con, TLSEXT_STATUSTYPE_ocsp);
SSL_CTX_set_tlsext_status_cb(ctx, ocsp_resp_cb);
SSL_CTX_set_tlsext_status_arg(ctx, bio_c_out);
#if 0
{
STACK_OF(OCSP_RESPID) *ids = sk_OCSP_RESPID_new_null();
OCSP_RESPID *id = OCSP_RESPID_new();
id->value.byKey = ASN1_OCTET_STRING_new();
id->type = V_OCSP_RESPID_KEY;
ASN1_STRING_set(id->value.byKey, "Hello World", -1);
sk_OCSP_RESPID_push(ids, id);
SSL_set_tlsext_status_ids(con, ids);
}
#endif
}
#endif
#ifndef OPENSSL_NO_JPAKE
if (jpake_secret)
jpake_client_auth(bio_c_out, sbio, jpake_secret);
#endif
SSL_set_bio(con,sbio,sbio);
SSL_set_connect_state(con);
/* ok, lets connect */
width=SSL_get_fd(con)+1;
read_tty=1;
write_tty=0;
tty_on=0;
read_ssl=1;
write_ssl=1;
cbuf_len=0;
cbuf_off=0;
sbuf_len=0;
sbuf_off=0;
/* This is an ugly hack that does a lot of assumptions */
/* We do have to handle multi-line responses which may come
in a single packet or not. We therefore have to use
BIO_gets() which does need a buffering BIO. So during
the initial chitchat we do push a buffering BIO into the
chain that is removed again later on to not disturb the
rest of the s_client operation. */
if (starttls_proto == PROTO_SMTP)
{
int foundit=0;
BIO *fbio = BIO_new(BIO_f_buffer());
BIO_push(fbio, sbio);
/* wait for multi-line response to end from SMTP */
do
{
mbuf_len = BIO_gets(fbio,mbuf,BUFSIZZ);
}
while (mbuf_len>3 && mbuf[3]=='-');
/* STARTTLS command requires EHLO... */
BIO_printf(fbio,"EHLO openssl.client.net\r\n");
(void)BIO_flush(fbio);
/* wait for multi-line response to end EHLO SMTP response */
do
{
mbuf_len = BIO_gets(fbio,mbuf,BUFSIZZ);
if (strstr(mbuf,"STARTTLS"))
foundit=1;
}
while (mbuf_len>3 && mbuf[3]=='-');
(void)BIO_flush(fbio);
BIO_pop(fbio);
BIO_free(fbio);
if (!foundit)
BIO_printf(bio_err,
"didn't found starttls in server response,"
" try anyway...\n");
BIO_printf(sbio,"STARTTLS\r\n");
BIO_read(sbio,sbuf,BUFSIZZ);
}
else if (starttls_proto == PROTO_POP3)
{
BIO_read(sbio,mbuf,BUFSIZZ);
BIO_printf(sbio,"STLS\r\n");
BIO_read(sbio,sbuf,BUFSIZZ);
}
else if (starttls_proto == PROTO_IMAP)
{
int foundit=0;
BIO *fbio = BIO_new(BIO_f_buffer());
BIO_push(fbio, sbio);
BIO_gets(fbio,mbuf,BUFSIZZ);
/* STARTTLS command requires CAPABILITY... */
BIO_printf(fbio,". CAPABILITY\r\n");
(void)BIO_flush(fbio);
/* wait for multi-line CAPABILITY response */
do
{
mbuf_len = BIO_gets(fbio,mbuf,BUFSIZZ);
if (strstr(mbuf,"STARTTLS"))
foundit=1;
}
while (mbuf_len>3 && mbuf[0]!='.');
(void)BIO_flush(fbio);
BIO_pop(fbio);
BIO_free(fbio);
if (!foundit)
BIO_printf(bio_err,
"didn't found STARTTLS in server response,"
" try anyway...\n");
BIO_printf(sbio,". STARTTLS\r\n");
BIO_read(sbio,sbuf,BUFSIZZ);
}
else if (starttls_proto == PROTO_FTP)
{
BIO *fbio = BIO_new(BIO_f_buffer());
BIO_push(fbio, sbio);
/* wait for multi-line response to end from FTP */
do
{
mbuf_len = BIO_gets(fbio,mbuf,BUFSIZZ);
}
while (mbuf_len>3 && mbuf[3]=='-');
(void)BIO_flush(fbio);
BIO_pop(fbio);
BIO_free(fbio);
BIO_printf(sbio,"AUTH TLS\r\n");
BIO_read(sbio,sbuf,BUFSIZZ);
}
if (starttls_proto == PROTO_XMPP)
{
int seen = 0;
BIO_printf(sbio,"<stream:stream "
"xmlns:stream='http://etherx.jabber.org/streams' "
"xmlns='jabber:client' to='%s' version='1.0'>", host);
seen = BIO_read(sbio,mbuf,BUFSIZZ);
mbuf[seen] = 0;
while (!strstr(mbuf, "<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'"))
{
if (strstr(mbuf, "/stream:features>"))
goto shut;
seen = BIO_read(sbio,mbuf,BUFSIZZ);
mbuf[seen] = 0;
}
BIO_printf(sbio, "<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'/>");
seen = BIO_read(sbio,sbuf,BUFSIZZ);
sbuf[seen] = 0;
if (!strstr(sbuf, "<proceed"))
goto shut;
mbuf[0] = 0;
}
for (;;)
{
FD_ZERO(&readfds);
FD_ZERO(&writefds);
if ((SSL_version(con) == DTLS1_VERSION) &&
DTLSv1_get_timeout(con, &timeout))
timeoutp = &timeout;
else
timeoutp = NULL;
if (SSL_in_init(con) && !SSL_total_renegotiations(con))
{
in_init=1;
tty_on=0;
}
else
{
tty_on=1;
if (in_init)
{
in_init=0;
#if 0 /* This test doesn't really work as intended (needs to be fixed) */
#ifndef OPENSSL_NO_TLSEXT
if (servername != NULL && !SSL_session_reused(con))
{
BIO_printf(bio_c_out,"Server did %sacknowledge servername extension.\n",tlsextcbp.ack?"":"not ");
}
#endif
#endif
if (sess_out)
{
BIO *stmp = BIO_new_file(sess_out, "w");
if (stmp)
{
PEM_write_bio_SSL_SESSION(stmp, SSL_get_session(con));
BIO_free(stmp);
}
else
BIO_printf(bio_err, "Error writing session file %s\n", sess_out);
}
print_stuff(bio_c_out,con,full_log);
if (full_log > 0) full_log--;
if (starttls_proto)
{
BIO_printf(bio_err,"%s",mbuf);
/* We don't need to know any more */
starttls_proto = PROTO_OFF;
}
if (reconnect)
{
reconnect--;
BIO_printf(bio_c_out,"drop connection and then reconnect\n");
SSL_shutdown(con);
SSL_set_connect_state(con);
SHUTDOWN(SSL_get_fd(con));
goto re_start;
}
}
}
ssl_pending = read_ssl && SSL_pending(con);
if (!ssl_pending)
{
#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_NETWARE) && !defined (OPENSSL_SYS_BEOS_R5)
if (tty_on)
{
if (read_tty) openssl_fdset(fileno(stdin),&readfds);
if (write_tty) openssl_fdset(fileno(stdout),&writefds);
}
if (read_ssl)
openssl_fdset(SSL_get_fd(con),&readfds);
if (write_ssl)
openssl_fdset(SSL_get_fd(con),&writefds);
#else
if(!tty_on || !write_tty) {
if (read_ssl)
openssl_fdset(SSL_get_fd(con),&readfds);
if (write_ssl)
openssl_fdset(SSL_get_fd(con),&writefds);
}
#endif
/* printf("mode tty(%d %d%d) ssl(%d%d)\n",
tty_on,read_tty,write_tty,read_ssl,write_ssl);*/
/* Note: under VMS with SOCKETSHR the second parameter
* is currently of type (int *) whereas under other
* systems it is (void *) if you don't have a cast it
* will choke the compiler: if you do have a cast then
* you can either go for (int *) or (void *).
*/
#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
/* Under Windows/DOS we make the assumption that we can
* always write to the tty: therefore if we need to
* write to the tty we just fall through. Otherwise
* we timeout the select every second and see if there
* are any keypresses. Note: this is a hack, in a proper
* Windows application we wouldn't do this.
*/
i=0;
if(!write_tty) {
if(read_tty) {
tv.tv_sec = 1;
tv.tv_usec = 0;
i=select(width,(void *)&readfds,(void *)&writefds,
NULL,&tv);
#if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
if(!i && (!_kbhit() || !read_tty) ) continue;
#else
if(!i && (!((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0))) || !read_tty) ) continue;
#endif
} else i=select(width,(void *)&readfds,(void *)&writefds,
NULL,timeoutp);
}
#elif defined(OPENSSL_SYS_NETWARE)
if(!write_tty) {
if(read_tty) {
tv.tv_sec = 1;
tv.tv_usec = 0;
i=select(width,(void *)&readfds,(void *)&writefds,
NULL,&tv);
} else i=select(width,(void *)&readfds,(void *)&writefds,
NULL,timeoutp);
}
#elif defined(OPENSSL_SYS_BEOS_R5)
/* Under BeOS-R5 the situation is similar to DOS */
i=0;
stdin_set = 0;
(void)fcntl(fileno(stdin), F_SETFL, O_NONBLOCK);
if(!write_tty) {
if(read_tty) {
tv.tv_sec = 1;
tv.tv_usec = 0;
i=select(width,(void *)&readfds,(void *)&writefds,
NULL,&tv);
if (read(fileno(stdin), sbuf, 0) >= 0)
stdin_set = 1;
if (!i && (stdin_set != 1 || !read_tty))
continue;
} else i=select(width,(void *)&readfds,(void *)&writefds,
NULL,timeoutp);
}
(void)fcntl(fileno(stdin), F_SETFL, 0);
#else
i=select(width,(void *)&readfds,(void *)&writefds,
NULL,timeoutp);
#endif
if ( i < 0)
{
BIO_printf(bio_err,"bad select %d\n",
get_last_socket_error());
goto shut;
/* goto end; */
}
}
if ((SSL_version(con) == DTLS1_VERSION) && DTLSv1_handle_timeout(con) > 0)
{
BIO_printf(bio_err,"TIMEOUT occured\n");
}
if (!ssl_pending && FD_ISSET(SSL_get_fd(con),&writefds))
{
k=SSL_write(con,&(cbuf[cbuf_off]),
(unsigned int)cbuf_len);
switch (SSL_get_error(con,k))
{
case SSL_ERROR_NONE:
cbuf_off+=k;
cbuf_len-=k;
if (k <= 0) goto end;
/* we have done a write(con,NULL,0); */
if (cbuf_len <= 0)
{
read_tty=1;
write_ssl=0;
}
else /* if (cbuf_len > 0) */
{
read_tty=0;
write_ssl=1;
}
break;
case SSL_ERROR_WANT_WRITE:
BIO_printf(bio_c_out,"write W BLOCK\n");
write_ssl=1;
read_tty=0;
break;
case SSL_ERROR_WANT_READ:
BIO_printf(bio_c_out,"write R BLOCK\n");
write_tty=0;
read_ssl=1;
write_ssl=0;
break;
case SSL_ERROR_WANT_X509_LOOKUP:
BIO_printf(bio_c_out,"write X BLOCK\n");
break;
case SSL_ERROR_ZERO_RETURN:
if (cbuf_len != 0)
{
BIO_printf(bio_c_out,"shutdown\n");
ret = 0;
goto shut;
}
else
{
read_tty=1;
write_ssl=0;
break;
}
case SSL_ERROR_SYSCALL:
if ((k != 0) || (cbuf_len != 0))
{
BIO_printf(bio_err,"write:errno=%d\n",
get_last_socket_error());
goto shut;
}
else
{
read_tty=1;
write_ssl=0;
}
break;
case SSL_ERROR_SSL:
ERR_print_errors(bio_err);
goto shut;
}
}
#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE) || defined(OPENSSL_SYS_BEOS_R5)
/* Assume Windows/DOS/BeOS can always write */
else if (!ssl_pending && write_tty)
#else
else if (!ssl_pending && FD_ISSET(fileno(stdout),&writefds))
#endif
{
#ifdef CHARSET_EBCDIC
ascii2ebcdic(&(sbuf[sbuf_off]),&(sbuf[sbuf_off]),sbuf_len);
#endif
i=raw_write_stdout(&(sbuf[sbuf_off]),sbuf_len);
if (i <= 0)
{
BIO_printf(bio_c_out,"DONE\n");
ret = 0;
goto shut;
/* goto end; */
}
sbuf_len-=i;;
sbuf_off+=i;
if (sbuf_len <= 0)
{
read_ssl=1;
write_tty=0;
}
}
else if (ssl_pending || FD_ISSET(SSL_get_fd(con),&readfds))
{
#ifdef RENEG
{ static int iiii; if (++iiii == 52) { SSL_renegotiate(con); iiii=0; } }
#endif
#if 1
k=SSL_read(con,sbuf,1024 /* BUFSIZZ */ );
#else
/* Demo for pending and peek :-) */
k=SSL_read(con,sbuf,16);
{ char zbuf[10240];
printf("read=%d pending=%d peek=%d\n",k,SSL_pending(con),SSL_peek(con,zbuf,10240));
}
#endif
switch (SSL_get_error(con,k))
{
case SSL_ERROR_NONE:
if (k <= 0)
goto end;
sbuf_off=0;
sbuf_len=k;
read_ssl=0;
write_tty=1;
break;
case SSL_ERROR_WANT_WRITE:
BIO_printf(bio_c_out,"read W BLOCK\n");
write_ssl=1;
read_tty=0;
break;
case SSL_ERROR_WANT_READ:
BIO_printf(bio_c_out,"read R BLOCK\n");
write_tty=0;
read_ssl=1;
if ((read_tty == 0) && (write_ssl == 0))
write_ssl=1;
break;
case SSL_ERROR_WANT_X509_LOOKUP:
BIO_printf(bio_c_out,"read X BLOCK\n");
break;
case SSL_ERROR_SYSCALL:
ret=get_last_socket_error();
BIO_printf(bio_err,"read:errno=%d\n",ret);
goto shut;
case SSL_ERROR_ZERO_RETURN:
BIO_printf(bio_c_out,"closed\n");
ret=0;
goto shut;
case SSL_ERROR_SSL:
ERR_print_errors(bio_err);
goto shut;
/* break; */
}
}
#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
#if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
else if (_kbhit())
#else
else if ((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0)))
#endif
#elif defined (OPENSSL_SYS_NETWARE)
else if (_kbhit())
#elif defined(OPENSSL_SYS_BEOS_R5)
else if (stdin_set)
#else
else if (FD_ISSET(fileno(stdin),&readfds))
#endif
{
if (crlf)
{
int j, lf_num;
i=raw_read_stdin(cbuf,BUFSIZZ/2);
lf_num = 0;
/* both loops are skipped when i <= 0 */
for (j = 0; j < i; j++)
if (cbuf[j] == '\n')
lf_num++;
for (j = i-1; j >= 0; j--)
{
cbuf[j+lf_num] = cbuf[j];
if (cbuf[j] == '\n')
{
lf_num--;
i++;
cbuf[j+lf_num] = '\r';
}
}
assert(lf_num == 0);
}
else
i=raw_read_stdin(cbuf,BUFSIZZ);
if ((!c_ign_eof) && ((i <= 0) || (cbuf[0] == 'Q')))
{
BIO_printf(bio_err,"DONE\n");
ret=0;
goto shut;
}
if ((!c_ign_eof) && (cbuf[0] == 'R'))
{
BIO_printf(bio_err,"RENEGOTIATING\n");
SSL_renegotiate(con);
cbuf_len=0;
}
else
{
cbuf_len=i;
cbuf_off=0;
#ifdef CHARSET_EBCDIC
ebcdic2ascii(cbuf, cbuf, i);
#endif
}
write_ssl=1;
read_tty=0;
}
}
ret=0;
shut:
if (in_init)
print_stuff(bio_c_out,con,full_log);
SSL_shutdown(con);
SHUTDOWN(SSL_get_fd(con));
end:
if (con != NULL)
{
if (prexit != 0)
print_stuff(bio_c_out,con,1);
SSL_free(con);
}
if (ctx != NULL) SSL_CTX_free(ctx);
if (cert)
X509_free(cert);
if (key)
EVP_PKEY_free(key);
if (pass)
OPENSSL_free(pass);
if (cbuf != NULL) { OPENSSL_cleanse(cbuf,BUFSIZZ); OPENSSL_free(cbuf); }
if (sbuf != NULL) { OPENSSL_cleanse(sbuf,BUFSIZZ); OPENSSL_free(sbuf); }
if (mbuf != NULL) { OPENSSL_cleanse(mbuf,BUFSIZZ); OPENSSL_free(mbuf); }
if (bio_c_out != NULL)
{
BIO_free(bio_c_out);
bio_c_out=NULL;
}
apps_shutdown();
OPENSSL_EXIT(ret);
}
static void print_stuff(BIO *bio, SSL *s, int full)
{
X509 *peer=NULL;
char *p;
static const char *space=" ";
char buf[BUFSIZ];
STACK_OF(X509) *sk;
STACK_OF(X509_NAME) *sk2;
const SSL_CIPHER *c;
X509_NAME *xn;
int j,i;
#ifndef OPENSSL_NO_COMP
const COMP_METHOD *comp, *expansion;
#endif
if (full)
{
int got_a_chain = 0;
sk=SSL_get_peer_cert_chain(s);
if (sk != NULL)
{
got_a_chain = 1; /* we don't have it for SSL2 (yet) */
BIO_printf(bio,"---\nCertificate chain\n");
for (i=0; i<sk_X509_num(sk); i++)
{
X509_NAME_oneline(X509_get_subject_name(
sk_X509_value(sk,i)),buf,sizeof buf);
BIO_printf(bio,"%2d s:%s\n",i,buf);
X509_NAME_oneline(X509_get_issuer_name(
sk_X509_value(sk,i)),buf,sizeof buf);
BIO_printf(bio," i:%s\n",buf);
if (c_showcerts)
PEM_write_bio_X509(bio,sk_X509_value(sk,i));
}
}
BIO_printf(bio,"---\n");
peer=SSL_get_peer_certificate(s);
if (peer != NULL)
{
BIO_printf(bio,"Server certificate\n");
if (!(c_showcerts && got_a_chain)) /* Redundant if we showed the whole chain */
PEM_write_bio_X509(bio,peer);
X509_NAME_oneline(X509_get_subject_name(peer),
buf,sizeof buf);
BIO_printf(bio,"subject=%s\n",buf);
X509_NAME_oneline(X509_get_issuer_name(peer),
buf,sizeof buf);
BIO_printf(bio,"issuer=%s\n",buf);
}
else
BIO_printf(bio,"no peer certificate available\n");
sk2=SSL_get_client_CA_list(s);
if ((sk2 != NULL) && (sk_X509_NAME_num(sk2) > 0))
{
BIO_printf(bio,"---\nAcceptable client certificate CA names\n");
for (i=0; i<sk_X509_NAME_num(sk2); i++)
{
xn=sk_X509_NAME_value(sk2,i);
X509_NAME_oneline(xn,buf,sizeof(buf));
BIO_write(bio,buf,strlen(buf));
BIO_write(bio,"\n",1);
}
}
else
{
BIO_printf(bio,"---\nNo client certificate CA names sent\n");
}
p=SSL_get_shared_ciphers(s,buf,sizeof buf);
if (p != NULL)
{
/* This works only for SSL 2. In later protocol
* versions, the client does not know what other
* ciphers (in addition to the one to be used
* in the current connection) the server supports. */
BIO_printf(bio,"---\nCiphers common between both SSL endpoints:\n");
j=i=0;
while (*p)
{
if (*p == ':')
{
BIO_write(bio,space,15-j%25);
i++;
j=0;
BIO_write(bio,((i%3)?" ":"\n"),1);
}
else
{
BIO_write(bio,p,1);
j++;
}
p++;
}
BIO_write(bio,"\n",1);
}
BIO_printf(bio,"---\nSSL handshake has read %ld bytes and written %ld bytes\n",
BIO_number_read(SSL_get_rbio(s)),
BIO_number_written(SSL_get_wbio(s)));
}
BIO_printf(bio,((s->hit)?"---\nReused, ":"---\nNew, "));
c=SSL_get_current_cipher(s);
BIO_printf(bio,"%s, Cipher is %s\n",
SSL_CIPHER_get_version(c),
SSL_CIPHER_get_name(c));
if (peer != NULL) {
EVP_PKEY *pktmp;
pktmp = X509_get_pubkey(peer);
BIO_printf(bio,"Server public key is %d bit\n",
EVP_PKEY_bits(pktmp));
EVP_PKEY_free(pktmp);
}
BIO_printf(bio, "Secure Renegotiation IS%s supported\n",
SSL_get_secure_renegotiation_support(s) ? "" : " NOT");
#ifndef OPENSSL_NO_COMP
comp=SSL_get_current_compression(s);
expansion=SSL_get_current_expansion(s);
BIO_printf(bio,"Compression: %s\n",
comp ? SSL_COMP_get_name(comp) : "NONE");
BIO_printf(bio,"Expansion: %s\n",
expansion ? SSL_COMP_get_name(expansion) : "NONE");
#endif
SSL_SESSION_print(bio,SSL_get_session(s));
BIO_printf(bio,"---\n");
if (peer != NULL)
X509_free(peer);
/* flush, or debugging output gets mixed with http response */
(void)BIO_flush(bio);
}
#ifndef OPENSSL_NO_TLSEXT
static int ocsp_resp_cb(SSL *s, void *arg)
{
const unsigned char *p;
int len;
OCSP_RESPONSE *rsp;
len = SSL_get_tlsext_status_ocsp_resp(s, &p);
BIO_puts(arg, "OCSP response: ");
if (!p)
{
BIO_puts(arg, "no response sent\n");
return 1;
}
rsp = d2i_OCSP_RESPONSE(NULL, &p, len);
if (!rsp)
{
BIO_puts(arg, "response parse error\n");
BIO_dump_indent(arg, (char *)p, len, 4);
return 0;
}
BIO_puts(arg, "\n======================================\n");
OCSP_RESPONSE_print(arg, rsp, 0);
BIO_puts(arg, "======================================\n");
OCSP_RESPONSE_free(rsp);
return 1;
}
#endif