wbrawner/openssl
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
openssl/ssl/s3_pkt.c
Matt Caswell 9e43fe9a2b Fix write failure handling in DTLS1.2 
The DTLS code is supposed to drop packets if we try to write them out but
the underlying BIO write buffers are full. ssl3_write_pending() contains
an incorrect test for DTLS that controls this. The test only checks for
DTLS1 so DTLS1.2 does not correctly clear the internal OpenSSL buffer which
can later cause an assert to be hit. This commit changes the test to cover
all DTLS versions.

RT#3967

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 5e8b24dbfb)
2015-07-30 10:18:43 +01:00

1748 lines
58 KiB
C
Raw Blame History

/* ssl/s3_pkt.c */
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
* All rights reserved.
*
* This package is an SSL implementation written
* by Eric Young (eay@cryptsoft.com).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson (tjh@cryptsoft.com).
*
* Copyright remains Eric Young's, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at program startup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* "This product includes cryptographic software written by
* Eric Young (eay@cryptsoft.com)"
* The word 'cryptographic' can be left out if the rouines from the library
* being used are not cryptographic related :-).
* 4. If you include any Windows specific code (or a derivative thereof) from
* the apps directory (application code) you must include an acknowledgement:
* "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/
/* ====================================================================
* Copyright (c) 1998-2002 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* openssl-core@openssl.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.openssl.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com).
*
*/
#include <stdio.h>
#include <limits.h>
#include <errno.h>
#define USE_SOCKETS
#include "ssl_locl.h"
#include <openssl/evp.h>
#include <openssl/buffer.h>
#include <openssl/rand.h>
#ifndef EVP_CIPH_FLAG_TLS1_1_MULTIBLOCK
# define EVP_CIPH_FLAG_TLS1_1_MULTIBLOCK 0
#endif
#if defined(OPENSSL_SMALL_FOOTPRINT) || \
!( defined(AES_ASM) && ( \
defined(__x86_64) || defined(__x86_64__) || \
defined(_M_AMD64) || defined(_M_X64) || \
defined(__INTEL__) ) \
)
# undef EVP_CIPH_FLAG_TLS1_1_MULTIBLOCK
# define EVP_CIPH_FLAG_TLS1_1_MULTIBLOCK 0
#endif
static int do_ssl3_write(SSL *s, int type, const unsigned char *buf,
unsigned int len, int create_empty_fragment);
static int ssl3_get_record(SSL *s);
int ssl3_read_n(SSL *s, int n, int max, int extend)
{
/*
* If extend == 0, obtain new n-byte packet; if extend == 1, increase
* packet by another n bytes. The packet will be in the sub-array of
* s->s3->rbuf.buf specified by s->packet and s->packet_length. (If
* s->read_ahead is set, 'max' bytes may be stored in rbuf [plus
* s->packet_length bytes if extend == 1].)
*/
int i, len, left;
long align = 0;
unsigned char *pkt;
SSL3_BUFFER *rb;
if (n <= 0)
return n;
rb = &(s->s3->rbuf);
if (rb->buf == NULL)
if (!ssl3_setup_read_buffer(s))
return -1;
left = rb->left;
#if defined(SSL3_ALIGN_PAYLOAD) && SSL3_ALIGN_PAYLOAD!=0
align = (long)rb->buf + SSL3_RT_HEADER_LENGTH;
align = (-align) & (SSL3_ALIGN_PAYLOAD - 1);
#endif
if (!extend) {
/* start with empty packet ... */
if (left == 0)
rb->offset = align;
else if (align != 0 && left >= SSL3_RT_HEADER_LENGTH) {
/*
* check if next packet length is large enough to justify payload
* alignment...
*/
pkt = rb->buf + rb->offset;
if (pkt[0] == SSL3_RT_APPLICATION_DATA
&& (pkt[3] << 8 | pkt[4]) >= 128) {
/*
* Note that even if packet is corrupted and its length field
* is insane, we can only be led to wrong decision about
* whether memmove will occur or not. Header values has no
* effect on memmove arguments and therefore no buffer
* overrun can be triggered.
*/
memmove(rb->buf + align, pkt, left);
rb->offset = align;
}
}
s->packet = rb->buf + rb->offset;
s->packet_length = 0;
/* ... now we can act as if 'extend' was set */
}
/*
* For DTLS/UDP reads should not span multiple packets because the read
* operation returns the whole packet at once (as long as it fits into
* the buffer).
*/
if (SSL_IS_DTLS(s)) {
if (left == 0 && extend)
return 0;
if (left > 0 && n > left)
n = left;
}
/* if there is enough in the buffer from a previous read, take some */
if (left >= n) {
s->packet_length += n;
rb->left = left - n;
rb->offset += n;
return (n);
}
/* else we need to read more data */
len = s->packet_length;
pkt = rb->buf + align;
/*
* Move any available bytes to front of buffer: 'len' bytes already
* pointed to by 'packet', 'left' extra ones at the end
*/
if (s->packet != pkt) { /* len > 0 */
memmove(pkt, s->packet, len + left);
s->packet = pkt;
rb->offset = len + align;
}
if (n > (int)(rb->len - rb->offset)) { /* does not happen */
SSLerr(SSL_F_SSL3_READ_N, ERR_R_INTERNAL_ERROR);
return -1;
}
/* We always act like read_ahead is set for DTLS */
if (!s->read_ahead && !SSL_IS_DTLS(s))
/* ignore max parameter */
max = n;
else {
if (max < n)
max = n;
if (max > (int)(rb->len - rb->offset))
max = rb->len - rb->offset;
}
while (left < n) {
/*
* Now we have len+left bytes at the front of s->s3->rbuf.buf and
* need to read in more until we have len+n (up to len+max if
* possible)
*/
clear_sys_error();
if (s->rbio != NULL) {
s->rwstate = SSL_READING;
i = BIO_read(s->rbio, pkt + len + left, max - left);
} else {
SSLerr(SSL_F_SSL3_READ_N, SSL_R_READ_BIO_NOT_SET);
i = -1;
}
if (i <= 0) {
rb->left = left;
if (s->mode & SSL_MODE_RELEASE_BUFFERS && !SSL_IS_DTLS(s))
if (len + left == 0)
ssl3_release_read_buffer(s);
return (i);
}
left += i;
/*
* reads should *never* span multiple packets for DTLS because the
* underlying transport protocol is message oriented as opposed to
* byte oriented as in the TLS case.
*/
if (SSL_IS_DTLS(s)) {
if (n > left)
n = left; /* makes the while condition false */
}
}
/* done reading, now the book-keeping */
rb->offset += n;
rb->left = left - n;
s->packet_length += n;
s->rwstate = SSL_NOTHING;
return (n);
}
/*
* MAX_EMPTY_RECORDS defines the number of consecutive, empty records that
* will be processed per call to ssl3_get_record. Without this limit an
* attacker could send empty records at a faster rate than we can process and
* cause ssl3_get_record to loop forever.
*/
#define MAX_EMPTY_RECORDS 32
/*-
* Call this to get a new input record.
* It will return <= 0 if more data is needed, normally due to an error
* or non-blocking IO.
* When it finishes, one packet has been decoded and can be found in
* ssl->s3->rrec.type - is the type of record
* ssl->s3->rrec.data, - data
* ssl->s3->rrec.length, - number of bytes
*/
/* used only by ssl3_read_bytes */
static int ssl3_get_record(SSL *s)
{
int ssl_major, ssl_minor, al;
int enc_err, n, i, ret = -1;
SSL3_RECORD *rr;
SSL_SESSION *sess;
unsigned char *p;
unsigned char md[EVP_MAX_MD_SIZE];
short version;
unsigned mac_size, orig_len;
size_t extra;
unsigned empty_record_count = 0;
rr = &(s->s3->rrec);
sess = s->session;
if (s->options & SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER)
extra = SSL3_RT_MAX_EXTRA;
else
extra = 0;
if (extra && !s->s3->init_extra) {
/*
* An application error: SLS_OP_MICROSOFT_BIG_SSLV3_BUFFER set after
* ssl3_setup_buffers() was done
*/
SSLerr(SSL_F_SSL3_GET_RECORD, ERR_R_INTERNAL_ERROR);
return -1;
}
again:
/* check if we have the header */
if ((s->rstate != SSL_ST_READ_BODY) ||
(s->packet_length < SSL3_RT_HEADER_LENGTH)) {
n = ssl3_read_n(s, SSL3_RT_HEADER_LENGTH, s->s3->rbuf.len, 0);
if (n <= 0)
return (n); /* error or non-blocking */
s->rstate = SSL_ST_READ_BODY;
p = s->packet;
if (s->msg_callback)
s->msg_callback(0, 0, SSL3_RT_HEADER, p, 5, s,
s->msg_callback_arg);
/* Pull apart the header into the SSL3_RECORD */
rr->type = *(p++);
ssl_major = *(p++);
ssl_minor = *(p++);
version = (ssl_major << 8) | ssl_minor;
n2s(p, rr->length);
#if 0
fprintf(stderr, "Record type=%d, Length=%d\n", rr->type, rr->length);
#endif
/* Lets check version */
if (!s->first_packet) {
if (version != s->version) {
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_WRONG_VERSION_NUMBER);
if ((s->version & 0xFF00) == (version & 0xFF00)
&& !s->enc_write_ctx && !s->write_hash) {
if (rr->type == SSL3_RT_ALERT) {
/*
* The record is using an incorrect version number, but
* what we've got appears to be an alert. We haven't
* read the body yet to check whether its a fatal or
* not - but chances are it is. We probably shouldn't
* send a fatal alert back. We'll just end.
*/
goto err;
}
/*
* Send back error using their minor version number :-)
*/
s->version = (unsigned short)version;
}
al = SSL_AD_PROTOCOL_VERSION;
goto f_err;
}
}
if ((version >> 8) != SSL3_VERSION_MAJOR) {
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_WRONG_VERSION_NUMBER);
goto err;
}
if (rr->length > s->s3->rbuf.len - SSL3_RT_HEADER_LENGTH) {
al = SSL_AD_RECORD_OVERFLOW;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_PACKET_LENGTH_TOO_LONG);
goto f_err;
}
/* now s->rstate == SSL_ST_READ_BODY */
}
/* s->rstate == SSL_ST_READ_BODY, get and decode the data */
if (rr->length > s->packet_length - SSL3_RT_HEADER_LENGTH) {
/* now s->packet_length == SSL3_RT_HEADER_LENGTH */
i = rr->length;
n = ssl3_read_n(s, i, i, 1);
if (n <= 0)
return (n); /* error or non-blocking io */
/*
* now n == rr->length, and s->packet_length == SSL3_RT_HEADER_LENGTH
* + rr->length
*/
}
s->rstate = SSL_ST_READ_HEADER; /* set state for later operations */
/*
* At this point, s->packet_length == SSL3_RT_HEADER_LNGTH + rr->length,
* and we have that many bytes in s->packet
*/
rr->input = &(s->packet[SSL3_RT_HEADER_LENGTH]);
/*
* ok, we can now read from 's->packet' data into 'rr' rr->input points
* at rr->length bytes, which need to be copied into rr->data by either
* the decryption or by the decompression When the data is 'copied' into
* the rr->data buffer, rr->input will be pointed at the new buffer
*/
/*
* We now have - encrypted [ MAC [ compressed [ plain ] ] ] rr->length
* bytes of encrypted compressed stuff.
*/
/* check is not needed I believe */
if (rr->length > SSL3_RT_MAX_ENCRYPTED_LENGTH + extra) {
al = SSL_AD_RECORD_OVERFLOW;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_ENCRYPTED_LENGTH_TOO_LONG);
goto f_err;
}
/* decrypt in place in 'rr->input' */
rr->data = rr->input;
enc_err = s->method->ssl3_enc->enc(s, 0);
/*-
* enc_err is:
* 0: (in non-constant time) if the record is publically invalid.
* 1: if the padding is valid
* -1: if the padding is invalid
*/
if (enc_err == 0) {
al = SSL_AD_DECRYPTION_FAILED;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_BLOCK_CIPHER_PAD_IS_WRONG);
goto f_err;
}
#ifdef TLS_DEBUG
printf("dec %d\n", rr->length);
{
unsigned int z;
for (z = 0; z < rr->length; z++)
printf("%02X%c", rr->data[z], ((z + 1) % 16) ? ' ' : '\n');
}
printf("\n");
#endif
/* r->length is now the compressed data plus mac */
if ((sess != NULL) &&
(s->enc_read_ctx != NULL) && (EVP_MD_CTX_md(s->read_hash) != NULL)) {
/* s->read_hash != NULL => mac_size != -1 */
unsigned char *mac = NULL;
unsigned char mac_tmp[EVP_MAX_MD_SIZE];
mac_size = EVP_MD_CTX_size(s->read_hash);
OPENSSL_assert(mac_size <= EVP_MAX_MD_SIZE);
/*
* kludge: *_cbc_remove_padding passes padding length in rr->type
*/
orig_len = rr->length + ((unsigned int)rr->type >> 8);
/*
* orig_len is the length of the record before any padding was
* removed. This is public information, as is the MAC in use,
* therefore we can safely process the record in a different amount
* of time if it's too short to possibly contain a MAC.
*/
if (orig_len < mac_size ||
/* CBC records must have a padding length byte too. */
(EVP_CIPHER_CTX_mode(s->enc_read_ctx) == EVP_CIPH_CBC_MODE &&
orig_len < mac_size + 1)) {
al = SSL_AD_DECODE_ERROR;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_LENGTH_TOO_SHORT);
goto f_err;
}
if (EVP_CIPHER_CTX_mode(s->enc_read_ctx) == EVP_CIPH_CBC_MODE) {
/*
* We update the length so that the TLS header bytes can be
* constructed correctly but we need to extract the MAC in
* constant time from within the record, without leaking the
* contents of the padding bytes.
*/
mac = mac_tmp;
ssl3_cbc_copy_mac(mac_tmp, rr, mac_size, orig_len);
rr->length -= mac_size;
} else {
/*
* In this case there's no padding, so |orig_len| equals
* |rec->length| and we checked that there's enough bytes for
* |mac_size| above.
*/
rr->length -= mac_size;
mac = &rr->data[rr->length];
}
i = s->method->ssl3_enc->mac(s, md, 0 /* not send */ );
if (i < 0 || mac == NULL
|| CRYPTO_memcmp(md, mac, (size_t)mac_size) != 0)
enc_err = -1;
if (rr->length > SSL3_RT_MAX_COMPRESSED_LENGTH + extra + mac_size)
enc_err = -1;
}
if (enc_err < 0) {
/*
* A separate 'decryption_failed' alert was introduced with TLS 1.0,
* SSL 3.0 only has 'bad_record_mac'. But unless a decryption
* failure is directly visible from the ciphertext anyway, we should
* not reveal which kind of error occured -- this might become
* visible to an attacker (e.g. via a logfile)
*/
al = SSL_AD_BAD_RECORD_MAC;
SSLerr(SSL_F_SSL3_GET_RECORD,
SSL_R_DECRYPTION_FAILED_OR_BAD_RECORD_MAC);
goto f_err;
}
/* r->length is now just compressed */
if (s->expand != NULL) {
if (rr->length > SSL3_RT_MAX_COMPRESSED_LENGTH + extra) {
al = SSL_AD_RECORD_OVERFLOW;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_COMPRESSED_LENGTH_TOO_LONG);
goto f_err;
}
if (!ssl3_do_uncompress(s)) {
al = SSL_AD_DECOMPRESSION_FAILURE;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_BAD_DECOMPRESSION);
goto f_err;
}
}
if (rr->length > SSL3_RT_MAX_PLAIN_LENGTH + extra) {
al = SSL_AD_RECORD_OVERFLOW;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_DATA_LENGTH_TOO_LONG);
goto f_err;
}
rr->off = 0;
/*-
* So at this point the following is true
* ssl->s3->rrec.type is the type of record
* ssl->s3->rrec.length == number of bytes in record
* ssl->s3->rrec.off == offset to first valid byte
* ssl->s3->rrec.data == where to take bytes from, increment
* after use :-).
*/
/* we have pulled in a full packet so zero things */
s->packet_length = 0;
/* just read a 0 length packet */
if (rr->length == 0) {
empty_record_count++;
if (empty_record_count > MAX_EMPTY_RECORDS) {
al = SSL_AD_UNEXPECTED_MESSAGE;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_RECORD_TOO_SMALL);
goto f_err;
}
goto again;
}
#if 0
fprintf(stderr, "Ultimate Record type=%d, Length=%d\n", rr->type,
rr->length);
#endif
return (1);
f_err:
ssl3_send_alert(s, SSL3_AL_FATAL, al);
err:
return (ret);
}
int ssl3_do_uncompress(SSL *ssl)
{
#ifndef OPENSSL_NO_COMP
int i;
SSL3_RECORD *rr;
rr = &(ssl->s3->rrec);
i = COMP_expand_block(ssl->expand, rr->comp,
SSL3_RT_MAX_PLAIN_LENGTH, rr->data,
(int)rr->length);
if (i < 0)
return (0);
else
rr->length = i;
rr->data = rr->comp;
#endif
return (1);
}
int ssl3_do_compress(SSL *ssl)
{
#ifndef OPENSSL_NO_COMP
int i;
SSL3_RECORD *wr;
wr = &(ssl->s3->wrec);
i = COMP_compress_block(ssl->compress, wr->data,
SSL3_RT_MAX_COMPRESSED_LENGTH,
wr->input, (int)wr->length);
if (i < 0)
return (0);
else
wr->length = i;
wr->input = wr->data;
#endif
return (1);
}
/*
* Call this to write data in records of type 'type' It will return <= 0 if
* not all data has been sent or non-blocking IO.
*/
int ssl3_write_bytes(SSL *s, int type, const void *buf_, int len)
{
const unsigned char *buf = buf_;
int tot;
unsigned int n, nw;
#if !defined(OPENSSL_NO_MULTIBLOCK) && EVP_CIPH_FLAG_TLS1_1_MULTIBLOCK
unsigned int max_send_fragment;
#endif
SSL3_BUFFER *wb = &(s->s3->wbuf);
int i;
s->rwstate = SSL_NOTHING;
OPENSSL_assert(s->s3->wnum <= INT_MAX);
tot = s->s3->wnum;
s->s3->wnum = 0;
if (SSL_in_init(s) && !s->in_handshake) {
i = s->handshake_func(s);
if (i < 0)
return (i);
if (i == 0) {
SSLerr(SSL_F_SSL3_WRITE_BYTES, SSL_R_SSL_HANDSHAKE_FAILURE);
return -1;
}
}
/*
* ensure that if we end up with a smaller value of data to write out
* than the the original len from a write which didn't complete for
* non-blocking I/O and also somehow ended up avoiding the check for
* this in ssl3_write_pending/SSL_R_BAD_WRITE_RETRY as it must never be
* possible to end up with (len-tot) as a large number that will then
* promptly send beyond the end of the users buffer ... so we trap and
* report the error in a way the user will notice
*/
if (len < tot) {
SSLerr(SSL_F_SSL3_WRITE_BYTES, SSL_R_BAD_LENGTH);
return (-1);
}
/*
* first check if there is a SSL3_BUFFER still being written out. This
* will happen with non blocking IO
*/
if (wb->left != 0) {
i = ssl3_write_pending(s, type, &buf[tot], s->s3->wpend_tot);
if (i <= 0) {
/* XXX should we ssl3_release_write_buffer if i<0? */
s->s3->wnum = tot;
return i;
}
tot += i; /* this might be last fragment */
}
#if !defined(OPENSSL_NO_MULTIBLOCK) && EVP_CIPH_FLAG_TLS1_1_MULTIBLOCK
/*
* Depending on platform multi-block can deliver several *times*
* better performance. Downside is that it has to allocate
* jumbo buffer to accomodate up to 8 records, but the
* compromise is considered worthy.
*/
if (type == SSL3_RT_APPLICATION_DATA &&
len >= 4 * (int)(max_send_fragment = s->max_send_fragment) &&
s->compress == NULL && s->msg_callback == NULL &&
SSL_USE_EXPLICIT_IV(s) &&
EVP_CIPHER_flags(s->enc_write_ctx->cipher) &
EVP_CIPH_FLAG_TLS1_1_MULTIBLOCK) {
unsigned char aad[13];
EVP_CTRL_TLS1_1_MULTIBLOCK_PARAM mb_param;
int packlen;
/* minimize address aliasing conflicts */
if ((max_send_fragment & 0xfff) == 0)
max_send_fragment -= 512;
if (tot == 0 || wb->buf == NULL) { /* allocate jumbo buffer */
ssl3_release_write_buffer(s);
packlen = EVP_CIPHER_CTX_ctrl(s->enc_write_ctx,
EVP_CTRL_TLS1_1_MULTIBLOCK_MAX_BUFSIZE,
max_send_fragment, NULL);
if (len >= 8 * (int)max_send_fragment)
packlen *= 8;
else
packlen *= 4;
wb->buf = OPENSSL_malloc(packlen);
if (!wb->buf) {
SSLerr(SSL_F_SSL3_WRITE_BYTES, ERR_R_MALLOC_FAILURE);
return -1;
}
wb->len = packlen;
} else if (tot == len) { /* done? */
OPENSSL_free(wb->buf); /* free jumbo buffer */
wb->buf = NULL;
return tot;
}
n = (len - tot);
for (;;) {
if (n < 4 * max_send_fragment) {
OPENSSL_free(wb->buf); /* free jumbo buffer */
wb->buf = NULL;
break;
}
if (s->s3->alert_dispatch) {
i = s->method->ssl_dispatch_alert(s);
if (i <= 0) {
s->s3->wnum = tot;
return i;
}
}
if (n >= 8 * max_send_fragment)
nw = max_send_fragment * (mb_param.interleave = 8);
else
nw = max_send_fragment * (mb_param.interleave = 4);
memcpy(aad, s->s3->write_sequence, 8);
aad[8] = type;
aad[9] = (unsigned char)(s->version >> 8);
aad[10] = (unsigned char)(s->version);
aad[11] = 0;
aad[12] = 0;
mb_param.out = NULL;
mb_param.inp = aad;
mb_param.len = nw;
packlen = EVP_CIPHER_CTX_ctrl(s->enc_write_ctx,
EVP_CTRL_TLS1_1_MULTIBLOCK_AAD,
sizeof(mb_param), &mb_param);
if (packlen <= 0 || packlen > (int)wb->len) { /* never happens */
OPENSSL_free(wb->buf); /* free jumbo buffer */
wb->buf = NULL;
break;
}
mb_param.out = wb->buf;
mb_param.inp = &buf[tot];
mb_param.len = nw;
if (EVP_CIPHER_CTX_ctrl(s->enc_write_ctx,
EVP_CTRL_TLS1_1_MULTIBLOCK_ENCRYPT,
sizeof(mb_param), &mb_param) <= 0)
return -1;
s->s3->write_sequence[7] += mb_param.interleave;
if (s->s3->write_sequence[7] < mb_param.interleave) {
int j = 6;
while (j >= 0 && (++s->s3->write_sequence[j--]) == 0) ;
}
wb->offset = 0;
wb->left = packlen;
s->s3->wpend_tot = nw;
s->s3->wpend_buf = &buf[tot];
s->s3->wpend_type = type;
s->s3->wpend_ret = nw;
i = ssl3_write_pending(s, type, &buf[tot], nw);
if (i <= 0) {
if (i < 0 && (!s->wbio || !BIO_should_retry(s->wbio))) {
OPENSSL_free(wb->buf);
wb->buf = NULL;
}
s->s3->wnum = tot;
return i;
}
if (i == (int)n) {
OPENSSL_free(wb->buf); /* free jumbo buffer */
wb->buf = NULL;
return tot + i;
}
n -= i;
tot += i;
}
} else
#endif
if (tot == len) { /* done? */
if (s->mode & SSL_MODE_RELEASE_BUFFERS && !SSL_IS_DTLS(s))
ssl3_release_write_buffer(s);
return tot;
}
n = (len - tot);
for (;;) {
if (n > s->max_send_fragment)
nw = s->max_send_fragment;
else
nw = n;
i = do_ssl3_write(s, type, &(buf[tot]), nw, 0);
if (i <= 0) {
/* XXX should we ssl3_release_write_buffer if i<0? */
s->s3->wnum = tot;
return i;
}
if ((i == (int)n) ||
(type == SSL3_RT_APPLICATION_DATA &&
(s->mode & SSL_MODE_ENABLE_PARTIAL_WRITE))) {
/*
* next chunk of data should get another prepended empty fragment
* in ciphersuites with known-IV weakness:
*/
s->s3->empty_fragment_done = 0;
if ((i == (int)n) && s->mode & SSL_MODE_RELEASE_BUFFERS &&
!SSL_IS_DTLS(s))
ssl3_release_write_buffer(s);
return tot + i;
}
n -= i;
tot += i;
}
}
static int do_ssl3_write(SSL *s, int type, const unsigned char *buf,
unsigned int len, int create_empty_fragment)
{
unsigned char *p, *plen;
int i, mac_size, clear = 0;
int prefix_len = 0;
int eivlen;
long align = 0;
SSL3_RECORD *wr;
SSL3_BUFFER *wb = &(s->s3->wbuf);
SSL_SESSION *sess;
/*
* first check if there is a SSL3_BUFFER still being written out. This
* will happen with non blocking IO
*/
if (wb->left != 0)
return (ssl3_write_pending(s, type, buf, len));
/* If we have an alert to send, lets send it */
if (s->s3->alert_dispatch) {
i = s->method->ssl_dispatch_alert(s);
if (i <= 0)
return (i);
/* if it went, fall through and send more stuff */
}
if (wb->buf == NULL)
if (!ssl3_setup_write_buffer(s))
return -1;
if (len == 0 && !create_empty_fragment)
return 0;
wr = &(s->s3->wrec);
sess = s->session;
if ((sess == NULL) ||
(s->enc_write_ctx == NULL) ||
(EVP_MD_CTX_md(s->write_hash) == NULL)) {
#if 1
clear = s->enc_write_ctx ? 0 : 1; /* must be AEAD cipher */
#else
clear = 1;
#endif
mac_size = 0;
} else {
mac_size = EVP_MD_CTX_size(s->write_hash);
if (mac_size < 0)
goto err;
}
/*
* 'create_empty_fragment' is true only when this function calls itself
*/
if (!clear && !create_empty_fragment && !s->s3->empty_fragment_done) {
/*
* countermeasure against known-IV weakness in CBC ciphersuites (see
* http://www.openssl.org/~bodo/tls-cbc.txt)
*/
if (s->s3->need_empty_fragments && type == SSL3_RT_APPLICATION_DATA) {
/*
* recursive function call with 'create_empty_fragment' set; this
* prepares and buffers the data for an empty fragment (these
* 'prefix_len' bytes are sent out later together with the actual
* payload)
*/
prefix_len = do_ssl3_write(s, type, buf, 0, 1);
if (prefix_len <= 0)
goto err;
if (prefix_len >
(SSL3_RT_HEADER_LENGTH + SSL3_RT_SEND_MAX_ENCRYPTED_OVERHEAD))
{
/* insufficient space */
SSLerr(SSL_F_DO_SSL3_WRITE, ERR_R_INTERNAL_ERROR);
goto err;
}
}
s->s3->empty_fragment_done = 1;
}
if (create_empty_fragment) {
#if defined(SSL3_ALIGN_PAYLOAD) && SSL3_ALIGN_PAYLOAD!=0
/*
* extra fragment would be couple of cipher blocks, which would be
* multiple of SSL3_ALIGN_PAYLOAD, so if we want to align the real
* payload, then we can just pretent we simply have two headers.
*/
align = (long)wb->buf + 2 * SSL3_RT_HEADER_LENGTH;
align = (-align) & (SSL3_ALIGN_PAYLOAD - 1);
#endif
p = wb->buf + align;
wb->offset = align;
} else if (prefix_len) {
p = wb->buf + wb->offset + prefix_len;
} else {
#if defined(SSL3_ALIGN_PAYLOAD) && SSL3_ALIGN_PAYLOAD!=0
align = (long)wb->buf + SSL3_RT_HEADER_LENGTH;
align = (-align) & (SSL3_ALIGN_PAYLOAD - 1);
#endif
p = wb->buf + align;
wb->offset = align;
}
/* write the header */
*(p++) = type & 0xff;
wr->type = type;
*(p++) = (s->version >> 8);
/*
* Some servers hang if iniatial client hello is larger than 256 bytes
* and record version number > TLS 1.0
*/
if (s->state == SSL3_ST_CW_CLNT_HELLO_B
&& !s->renegotiate && TLS1_get_version(s) > TLS1_VERSION)
*(p++) = 0x1;
else
*(p++) = s->version & 0xff;
/* field where we are to write out packet length */
plen = p;
p += 2;
/* Explicit IV length, block ciphers appropriate version flag */
if (s->enc_write_ctx && SSL_USE_EXPLICIT_IV(s)) {
int mode = EVP_CIPHER_CTX_mode(s->enc_write_ctx);
if (mode == EVP_CIPH_CBC_MODE) {
eivlen = EVP_CIPHER_CTX_iv_length(s->enc_write_ctx);
if (eivlen <= 1)
eivlen = 0;
}
/* Need explicit part of IV for GCM mode */
else if (mode == EVP_CIPH_GCM_MODE)
eivlen = EVP_GCM_TLS_EXPLICIT_IV_LEN;
else
eivlen = 0;
} else
eivlen = 0;
/* lets setup the record stuff. */
wr->data = p + eivlen;
wr->length = (int)len;
wr->input = (unsigned char *)buf;
/*
* we now 'read' from wr->input, wr->length bytes into wr->data
*/
/* first we compress */
if (s->compress != NULL) {
if (!ssl3_do_compress(s)) {
SSLerr(SSL_F_DO_SSL3_WRITE, SSL_R_COMPRESSION_FAILURE);
goto err;
}
} else {
memcpy(wr->data, wr->input, wr->length);
wr->input = wr->data;
}
/*
* we should still have the output to wr->data and the input from
* wr->input. Length should be wr->length. wr->data still points in the
* wb->buf
*/
if (mac_size != 0) {
if (s->method->ssl3_enc->mac(s, &(p[wr->length + eivlen]), 1) < 0)
goto err;
wr->length += mac_size;
}
wr->input = p;
wr->data = p;
if (eivlen) {
/*
* if (RAND_pseudo_bytes(p, eivlen) <= 0) goto err;
*/
wr->length += eivlen;
}
if (s->method->ssl3_enc->enc(s, 1) < 1)
goto err;
/* record length after mac and block padding */
s2n(wr->length, plen);
if (s->msg_callback)
s->msg_callback(1, 0, SSL3_RT_HEADER, plen - 5, 5, s,
s->msg_callback_arg);
/*
* we should now have wr->data pointing to the encrypted data, which is
* wr->length long
*/
wr->type = type; /* not needed but helps for debugging */
wr->length += SSL3_RT_HEADER_LENGTH;
if (create_empty_fragment) {
/*
* we are in a recursive call; just return the length, don't write
* out anything here
*/
return wr->length;
}
/* now let's set up wb */
wb->left = prefix_len + wr->length;
/*
* memorize arguments so that ssl3_write_pending can detect bad write
* retries later
*/
s->s3->wpend_tot = len;
s->s3->wpend_buf = buf;
s->s3->wpend_type = type;
s->s3->wpend_ret = len;
/* we now just need to write the buffer */
return ssl3_write_pending(s, type, buf, len);
err:
return -1;
}
/* if s->s3->wbuf.left != 0, we need to call this */
int ssl3_write_pending(SSL *s, int type, const unsigned char *buf,
unsigned int len)
{
int i;
SSL3_BUFFER *wb = &(s->s3->wbuf);
/* XXXX */
if ((s->s3->wpend_tot > (int)len)
|| ((s->s3->wpend_buf != buf) &&
!(s->mode & SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER))
|| (s->s3->wpend_type != type)) {
SSLerr(SSL_F_SSL3_WRITE_PENDING, SSL_R_BAD_WRITE_RETRY);
return (-1);
}
for (;;) {
clear_sys_error();
if (s->wbio != NULL) {
s->rwstate = SSL_WRITING;
i = BIO_write(s->wbio,
(char *)&(wb->buf[wb->offset]),
(unsigned int)wb->left);
} else {
SSLerr(SSL_F_SSL3_WRITE_PENDING, SSL_R_BIO_NOT_SET);
i = -1;
}
if (i == wb->left) {
wb->left = 0;
wb->offset += i;
s->rwstate = SSL_NOTHING;
return (s->s3->wpend_ret);
} else if (i <= 0) {
if (SSL_IS_DTLS(s)) {
/*
* For DTLS, just drop it. That's kind of the whole point in
* using a datagram service
*/
wb->left = 0;
}
return (i);
}
wb->offset += i;
wb->left -= i;
}
}
/*-
* Return up to 'len' payload bytes received in 'type' records.
* 'type' is one of the following:
*
* - SSL3_RT_HANDSHAKE (when ssl3_get_message calls us)
* - SSL3_RT_APPLICATION_DATA (when ssl3_read calls us)
* - 0 (during a shutdown, no data has to be returned)
*
* If we don't have stored data to work from, read a SSL/TLS record first
* (possibly multiple records if we still don't have anything to return).
*
* This function must handle any surprises the peer may have for us, such as
* Alert records (e.g. close_notify), ChangeCipherSpec records (not really
* a surprise, but handled as if it were), or renegotiation requests.
* Also if record payloads contain fragments too small to process, we store
* them until there is enough for the respective protocol (the record protocol
* may use arbitrary fragmentation and even interleaving):
* Change cipher spec protocol
* just 1 byte needed, no need for keeping anything stored
* Alert protocol
* 2 bytes needed (AlertLevel, AlertDescription)
* Handshake protocol
* 4 bytes needed (HandshakeType, uint24 length) -- we just have
* to detect unexpected Client Hello and Hello Request messages
* here, anything else is handled by higher layers
* Application data protocol
* none of our business
*/
int ssl3_read_bytes(SSL *s, int type, unsigned char *buf, int len, int peek)
{
int al, i, j, ret;
unsigned int n;
SSL3_RECORD *rr;
void (*cb) (const SSL *ssl, int type2, int val) = NULL;
if (s->s3->rbuf.buf == NULL) /* Not initialized yet */
if (!ssl3_setup_read_buffer(s))
return (-1);
if ((type && (type != SSL3_RT_APPLICATION_DATA)
&& (type != SSL3_RT_HANDSHAKE)) || (peek
&& (type !=
SSL3_RT_APPLICATION_DATA))) {
SSLerr(SSL_F_SSL3_READ_BYTES, ERR_R_INTERNAL_ERROR);
return -1;
}
if ((type == SSL3_RT_HANDSHAKE) && (s->s3->handshake_fragment_len > 0))
/* (partially) satisfy request from storage */
{
unsigned char *src = s->s3->handshake_fragment;
unsigned char *dst = buf;
unsigned int k;
/* peek == 0 */
n = 0;
while ((len > 0) && (s->s3->handshake_fragment_len > 0)) {
*dst++ = *src++;
len--;
s->s3->handshake_fragment_len--;
n++;
}
/* move any remaining fragment bytes: */
for (k = 0; k < s->s3->handshake_fragment_len; k++)
s->s3->handshake_fragment[k] = *src++;
return n;
}
/*
* Now s->s3->handshake_fragment_len == 0 if type == SSL3_RT_HANDSHAKE.
*/
if (!s->in_handshake && SSL_in_init(s)) {
/* type == SSL3_RT_APPLICATION_DATA */
i = s->handshake_func(s);
if (i < 0)
return (i);
if (i == 0) {
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_SSL_HANDSHAKE_FAILURE);
return (-1);
}
}
start:
s->rwstate = SSL_NOTHING;
/*-
* s->s3->rrec.type - is the type of record
* s->s3->rrec.data, - data
* s->s3->rrec.off, - offset into 'data' for next read
* s->s3->rrec.length, - number of bytes.
*/
rr = &(s->s3->rrec);
/* get new packet if necessary */
if ((rr->length == 0) || (s->rstate == SSL_ST_READ_BODY)) {
ret = ssl3_get_record(s);
if (ret <= 0)
return (ret);
}
/* we now have a packet which can be read and processed */
if (s->s3->change_cipher_spec /* set when we receive ChangeCipherSpec,
* reset by ssl3_get_finished */
&& (rr->type != SSL3_RT_HANDSHAKE)) {
al = SSL_AD_UNEXPECTED_MESSAGE;
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_DATA_BETWEEN_CCS_AND_FINISHED);
goto f_err;
}
/*
* If the other end has shut down, throw anything we read away (even in
* 'peek' mode)
*/
if (s->shutdown & SSL_RECEIVED_SHUTDOWN) {
rr->length = 0;
s->rwstate = SSL_NOTHING;
return (0);
}
if (type == rr->type) { /* SSL3_RT_APPLICATION_DATA or
* SSL3_RT_HANDSHAKE */
/*
* make sure that we are not getting application data when we are
* doing a handshake for the first time
*/
if (SSL_in_init(s) && (type == SSL3_RT_APPLICATION_DATA) &&
(s->enc_read_ctx == NULL)) {
al = SSL_AD_UNEXPECTED_MESSAGE;
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_APP_DATA_IN_HANDSHAKE);
goto f_err;
}
if (len <= 0)
return (len);
if ((unsigned int)len > rr->length)
n = rr->length;
else
n = (unsigned int)len;
memcpy(buf, &(rr->data[rr->off]), n);
if (!peek) {
rr->length -= n;
rr->off += n;
if (rr->length == 0) {
s->rstate = SSL_ST_READ_HEADER;
rr->off = 0;
if (s->mode & SSL_MODE_RELEASE_BUFFERS
&& s->s3->rbuf.left == 0)
ssl3_release_read_buffer(s);
}
}
return (n);
}
/*
* If we get here, then type != rr->type; if we have a handshake message,
* then it was unexpected (Hello Request or Client Hello).
*/
/*
* In case of record types for which we have 'fragment' storage, fill
* that so that we can process the data at a fixed place.
*/
{
unsigned int dest_maxlen = 0;
unsigned char *dest = NULL;
unsigned int *dest_len = NULL;
if (rr->type == SSL3_RT_HANDSHAKE) {
dest_maxlen = sizeof s->s3->handshake_fragment;
dest = s->s3->handshake_fragment;
dest_len = &s->s3->handshake_fragment_len;
} else if (rr->type == SSL3_RT_ALERT) {
dest_maxlen = sizeof s->s3->alert_fragment;
dest = s->s3->alert_fragment;
dest_len = &s->s3->alert_fragment_len;
}
#ifndef OPENSSL_NO_HEARTBEATS
else if (rr->type == TLS1_RT_HEARTBEAT) {
tls1_process_heartbeat(s);
/* Exit and notify application to read again */
rr->length = 0;
s->rwstate = SSL_READING;
BIO_clear_retry_flags(SSL_get_rbio(s));
BIO_set_retry_read(SSL_get_rbio(s));
return (-1);
}
#endif
if (dest_maxlen > 0) {
n = dest_maxlen - *dest_len; /* available space in 'dest' */
if (rr->length < n)
n = rr->length; /* available bytes */
/* now move 'n' bytes: */
while (n-- > 0) {
dest[(*dest_len)++] = rr->data[rr->off++];
rr->length--;
}
if (*dest_len < dest_maxlen)
goto start; /* fragment was too small */
}
}
/*-
* s->s3->handshake_fragment_len == 4 iff rr->type == SSL3_RT_HANDSHAKE;
* s->s3->alert_fragment_len == 2 iff rr->type == SSL3_RT_ALERT.
* (Possibly rr is 'empty' now, i.e. rr->length may be 0.)
*/
/* If we are a client, check for an incoming 'Hello Request': */
if ((!s->server) &&
(s->s3->handshake_fragment_len >= 4) &&
(s->s3->handshake_fragment[0] == SSL3_MT_HELLO_REQUEST) &&
(s->session != NULL) && (s->session->cipher != NULL)) {
s->s3->handshake_fragment_len = 0;
if ((s->s3->handshake_fragment[1] != 0) ||
(s->s3->handshake_fragment[2] != 0) ||
(s->s3->handshake_fragment[3] != 0)) {
al = SSL_AD_DECODE_ERROR;
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_BAD_HELLO_REQUEST);
goto f_err;
}
if (s->msg_callback)
s->msg_callback(0, s->version, SSL3_RT_HANDSHAKE,
s->s3->handshake_fragment, 4, s,
s->msg_callback_arg);
if (SSL_is_init_finished(s) &&
!(s->s3->flags & SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS) &&
!s->s3->renegotiate) {
ssl3_renegotiate(s);
if (ssl3_renegotiate_check(s)) {
i = s->handshake_func(s);
if (i < 0)
return (i);
if (i == 0) {
SSLerr(SSL_F_SSL3_READ_BYTES,
SSL_R_SSL_HANDSHAKE_FAILURE);
return (-1);
}
if (!(s->mode & SSL_MODE_AUTO_RETRY)) {
if (s->s3->rbuf.left == 0) { /* no read-ahead left? */
BIO *bio;
/*
* In the case where we try to read application data,
* but we trigger an SSL handshake, we return -1 with
* the retry option set. Otherwise renegotiation may
* cause nasty problems in the blocking world
*/
s->rwstate = SSL_READING;
bio = SSL_get_rbio(s);
BIO_clear_retry_flags(bio);
BIO_set_retry_read(bio);
return (-1);
}
}
}
}
/*
* we either finished a handshake or ignored the request, now try
* again to obtain the (application) data we were asked for
*/
goto start;
}
/*
* If we are a server and get a client hello when renegotiation isn't
* allowed send back a no renegotiation alert and carry on. WARNING:
* experimental code, needs reviewing (steve)
*/
if (s->server &&
SSL_is_init_finished(s) &&
!s->s3->send_connection_binding &&
(s->version > SSL3_VERSION) &&
(s->s3->handshake_fragment_len >= 4) &&
(s->s3->handshake_fragment[0] == SSL3_MT_CLIENT_HELLO) &&
(s->session != NULL) && (s->session->cipher != NULL) &&
!(s->ctx->options & SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION)) {
/*
* s->s3->handshake_fragment_len = 0;
*/
rr->length = 0;
ssl3_send_alert(s, SSL3_AL_WARNING, SSL_AD_NO_RENEGOTIATION);
goto start;
}
if (s->s3->alert_fragment_len >= 2) {
int alert_level = s->s3->alert_fragment[0];
int alert_descr = s->s3->alert_fragment[1];
s->s3->alert_fragment_len = 0;
if (s->msg_callback)
s->msg_callback(0, s->version, SSL3_RT_ALERT,
s->s3->alert_fragment, 2, s, s->msg_callback_arg);
if (s->info_callback != NULL)
cb = s->info_callback;
else if (s->ctx->info_callback != NULL)
cb = s->ctx->info_callback;
if (cb != NULL) {
j = (alert_level << 8) | alert_descr;
cb(s, SSL_CB_READ_ALERT, j);
}
if (alert_level == SSL3_AL_WARNING) {
s->s3->warn_alert = alert_descr;
if (alert_descr == SSL_AD_CLOSE_NOTIFY) {
s->shutdown |= SSL_RECEIVED_SHUTDOWN;
return (0);
}
/*
* This is a warning but we receive it if we requested
* renegotiation and the peer denied it. Terminate with a fatal
* alert because if application tried to renegotiatie it
* presumably had a good reason and expects it to succeed. In
* future we might have a renegotiation where we don't care if
* the peer refused it where we carry on.
*/
else if (alert_descr == SSL_AD_NO_RENEGOTIATION) {
al = SSL_AD_HANDSHAKE_FAILURE;
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_NO_RENEGOTIATION);
goto f_err;
}
#ifdef SSL_AD_MISSING_SRP_USERNAME
else if (alert_descr == SSL_AD_MISSING_SRP_USERNAME)
return (0);
#endif
} else if (alert_level == SSL3_AL_FATAL) {
char tmp[16];
s->rwstate = SSL_NOTHING;
s->s3->fatal_alert = alert_descr;
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_AD_REASON_OFFSET + alert_descr);
BIO_snprintf(tmp, sizeof tmp, "%d", alert_descr);
ERR_add_error_data(2, "SSL alert number ", tmp);
s->shutdown |= SSL_RECEIVED_SHUTDOWN;
SSL_CTX_remove_session(s->ctx, s->session);
return (0);
} else {
al = SSL_AD_ILLEGAL_PARAMETER;
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_UNKNOWN_ALERT_TYPE);
goto f_err;
}
goto start;
}
if (s->shutdown & SSL_SENT_SHUTDOWN) { /* but we have not received a
* shutdown */
s->rwstate = SSL_NOTHING;
rr->length = 0;
return (0);
}
if (rr->type == SSL3_RT_CHANGE_CIPHER_SPEC) {
/*
* 'Change Cipher Spec' is just a single byte, so we know exactly
* what the record payload has to look like
*/
if ((rr->length != 1) || (rr->off != 0) ||
(rr->data[0] != SSL3_MT_CCS)) {
al = SSL_AD_ILLEGAL_PARAMETER;
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_BAD_CHANGE_CIPHER_SPEC);
goto f_err;
}
/* Check we have a cipher to change to */
if (s->s3->tmp.new_cipher == NULL) {
al = SSL_AD_UNEXPECTED_MESSAGE;
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_CCS_RECEIVED_EARLY);
goto f_err;
}
if (!(s->s3->flags & SSL3_FLAGS_CCS_OK)) {
al = SSL_AD_UNEXPECTED_MESSAGE;
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_CCS_RECEIVED_EARLY);
goto f_err;
}
s->s3->flags &= ~SSL3_FLAGS_CCS_OK;
rr->length = 0;
if (s->msg_callback)
s->msg_callback(0, s->version, SSL3_RT_CHANGE_CIPHER_SPEC,
rr->data, 1, s, s->msg_callback_arg);
s->s3->change_cipher_spec = 1;
if (!ssl3_do_change_cipher_spec(s))
goto err;
else
goto start;
}
/*
* Unexpected handshake message (Client Hello, or protocol violation)
*/
if ((s->s3->handshake_fragment_len >= 4) && !s->in_handshake) {
if (((s->state & SSL_ST_MASK) == SSL_ST_OK) &&
!(s->s3->flags & SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS)) {
#if 0 /* worked only because C operator preferences
* are not as expected (and because this is
* not really needed for clients except for
* detecting protocol violations): */
s->state = SSL_ST_BEFORE | (s->server)
? SSL_ST_ACCEPT : SSL_ST_CONNECT;
#else
s->state = s->server ? SSL_ST_ACCEPT : SSL_ST_CONNECT;
#endif
s->renegotiate = 1;
s->new_session = 1;
}
i = s->handshake_func(s);
if (i < 0)
return (i);
if (i == 0) {
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_SSL_HANDSHAKE_FAILURE);
return (-1);
}
if (!(s->mode & SSL_MODE_AUTO_RETRY)) {
if (s->s3->rbuf.left == 0) { /* no read-ahead left? */
BIO *bio;
/*
* In the case where we try to read application data, but we
* trigger an SSL handshake, we return -1 with the retry
* option set. Otherwise renegotiation may cause nasty
* problems in the blocking world
*/
s->rwstate = SSL_READING;
bio = SSL_get_rbio(s);
BIO_clear_retry_flags(bio);
BIO_set_retry_read(bio);
return (-1);
}
}
goto start;
}
switch (rr->type) {
default:
#ifndef OPENSSL_NO_TLS
/*
* TLS up to v1.1 just ignores unknown message types: TLS v1.2 give
* an unexpected message alert.
*/
if (s->version >= TLS1_VERSION && s->version <= TLS1_1_VERSION) {
rr->length = 0;
goto start;
}
#endif
al = SSL_AD_UNEXPECTED_MESSAGE;
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_UNEXPECTED_RECORD);
goto f_err;
case SSL3_RT_CHANGE_CIPHER_SPEC:
case SSL3_RT_ALERT:
case SSL3_RT_HANDSHAKE:
/*
* we already handled all of these, with the possible exception of
* SSL3_RT_HANDSHAKE when s->in_handshake is set, but that should not
* happen when type != rr->type
*/
al = SSL_AD_UNEXPECTED_MESSAGE;
SSLerr(SSL_F_SSL3_READ_BYTES, ERR_R_INTERNAL_ERROR);
goto f_err;
case SSL3_RT_APPLICATION_DATA:
/*
* At this point, we were expecting handshake data, but have
* application data. If the library was running inside ssl3_read()
* (i.e. in_read_app_data is set) and it makes sense to read
* application data at this point (session renegotiation not yet
* started), we will indulge it.
*/
if (s->s3->in_read_app_data &&
(s->s3->total_renegotiations != 0) &&
(((s->state & SSL_ST_CONNECT) &&
(s->state >= SSL3_ST_CW_CLNT_HELLO_A) &&
(s->state <= SSL3_ST_CR_SRVR_HELLO_A)
) || ((s->state & SSL_ST_ACCEPT) &&
(s->state <= SSL3_ST_SW_HELLO_REQ_A) &&
(s->state >= SSL3_ST_SR_CLNT_HELLO_A)
)
)) {
s->s3->in_read_app_data = 2;
return (-1);
} else {
al = SSL_AD_UNEXPECTED_MESSAGE;
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_UNEXPECTED_RECORD);
goto f_err;
}
}
/* not reached */
f_err:
ssl3_send_alert(s, SSL3_AL_FATAL, al);
err:
return (-1);
}
int ssl3_do_change_cipher_spec(SSL *s)
{
int i;
const char *sender;
int slen;
if (s->state & SSL_ST_ACCEPT)
i = SSL3_CHANGE_CIPHER_SERVER_READ;
else
i = SSL3_CHANGE_CIPHER_CLIENT_READ;
if (s->s3->tmp.key_block == NULL) {
if (s->session == NULL || s->session->master_key_length == 0) {
/* might happen if dtls1_read_bytes() calls this */
SSLerr(SSL_F_SSL3_DO_CHANGE_CIPHER_SPEC,
SSL_R_CCS_RECEIVED_EARLY);
return (0);
}
s->session->cipher = s->s3->tmp.new_cipher;
if (!s->method->ssl3_enc->setup_key_block(s))
return (0);
}
if (!s->method->ssl3_enc->change_cipher_state(s, i))
return (0);
/*
* we have to record the message digest at this point so we can get it
* before we read the finished message
*/
if (s->state & SSL_ST_CONNECT) {
sender = s->method->ssl3_enc->server_finished_label;
slen = s->method->ssl3_enc->server_finished_label_len;
} else {
sender = s->method->ssl3_enc->client_finished_label;
slen = s->method->ssl3_enc->client_finished_label_len;
}
i = s->method->ssl3_enc->final_finish_mac(s,
sender, slen,
s->s3->tmp.peer_finish_md);
if (i == 0) {
SSLerr(SSL_F_SSL3_DO_CHANGE_CIPHER_SPEC, ERR_R_INTERNAL_ERROR);
return 0;
}
s->s3->tmp.peer_finish_md_len = i;
return (1);
}
int ssl3_send_alert(SSL *s, int level, int desc)
{
/* Map tls/ssl alert value to correct one */
desc = s->method->ssl3_enc->alert_value(desc);
if (s->version == SSL3_VERSION && desc == SSL_AD_PROTOCOL_VERSION)
desc = SSL_AD_HANDSHAKE_FAILURE; /* SSL 3.0 does not have
* protocol_version alerts */
if (desc < 0)
return -1;
/* If a fatal one, remove from cache */
if ((level == 2) && (s->session != NULL))
SSL_CTX_remove_session(s->ctx, s->session);
s->s3->alert_dispatch = 1;
s->s3->send_alert[0] = level;
s->s3->send_alert[1] = desc;
if (s->s3->wbuf.left == 0) /* data still being written out? */
return s->method->ssl_dispatch_alert(s);
/*
* else data is still being written out, we will get written some time in
* the future
*/
return -1;
}
int ssl3_dispatch_alert(SSL *s)
{
int i, j;
void (*cb) (const SSL *ssl, int type, int val) = NULL;
s->s3->alert_dispatch = 0;
i = do_ssl3_write(s, SSL3_RT_ALERT, &s->s3->send_alert[0], 2, 0);
if (i <= 0) {
s->s3->alert_dispatch = 1;
} else {
/*
* Alert sent to BIO. If it is important, flush it now. If the
* message does not get sent due to non-blocking IO, we will not
* worry too much.
*/
if (s->s3->send_alert[0] == SSL3_AL_FATAL)
(void)BIO_flush(s->wbio);
if (s->msg_callback)
s->msg_callback(1, s->version, SSL3_RT_ALERT, s->s3->send_alert,
2, s, s->msg_callback_arg);
if (s->info_callback != NULL)
cb = s->info_callback;
else if (s->ctx->info_callback != NULL)
cb = s->ctx->info_callback;
if (cb != NULL) {
j = (s->s3->send_alert[0] << 8) | s->s3->send_alert[1];
cb(s, SSL_CB_WRITE_ALERT, j);
}
}
return (i);
}
Reference in a new issue View git blame Copy permalink