wbrawner/openssl
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
openssl/ssl/d1_clnt.c
Matt Caswell 57787ac814 Remove support for SSL3_FLAGS_DELAY_CLIENT_FINISHED 
This flag was not set anywhere within the codebase (only read). It could
only be set by an app reaching directly into s->s3->flags and setting it
directly. However that method became impossible when libssl was opaquified.

Even in 1.0.2/1.0.1 if an app set the flag directly it is only relevant to
ssl3_connect(), which calls SSL_clear() during initialisation that clears
any flag settings. Therefore it could take effect if the app set the flag
after the handshake has started but before it completed. It seems quite
unlikely that any apps really do this (especially as it is completely
undocumented).

The purpose of the flag is suppress flushing of the write bio on the client
side at the end of the handshake after the client has written the Finished
message whilst resuming a session. This enables the client to send
application data as part of the same flight as the Finished message.

This flag also controls the setting of a second flag SSL3_FLAGS_POP_BUFFER.
There is an interesting comment in the code about this second flag in the
implementation of ssl3_write:

	/* This is an experimental flag that sends the
	 * last handshake message in the same packet as the first
	 * use data - used to see if it helps the TCP protocol during
	 * session-id reuse */

It seems the experiment did not work because as far as I can tell nothing
is using this code. The above comment has been in the code since SSLeay.

This commit removes support for SSL3_FLAGS_DELAY_CLIENT_FINISHED, as well
as the associated SSL3_FLAGS_POP_BUFFER.

Reviewed-by: Rich Salz <rsalz@openssl.org>
2015-07-27 15:00:05 +01:00

809 lines
27 KiB
C
Raw Blame History

/* ssl/d1_clnt.c */
/*
* DTLS implementation written by Nagendra Modadugu
* (nagendra@cs.stanford.edu) for the OpenSSL project 2005.
*/
/* ====================================================================
* Copyright (c) 1999-2007 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* openssl-core@OpenSSL.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com).
*
*/
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
* All rights reserved.
*
* This package is an SSL implementation written
* by Eric Young (eay@cryptsoft.com).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson (tjh@cryptsoft.com).
*
* Copyright remains Eric Young's, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at program startup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* "This product includes cryptographic software written by
* Eric Young (eay@cryptsoft.com)"
* The word 'cryptographic' can be left out if the rouines from the library
* being used are not cryptographic related :-).
* 4. If you include any Windows specific code (or a derivative thereof) from
* the apps directory (application code) you must include an acknowledgement:
* "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/
#include <stdio.h>
#include "ssl_locl.h"
#include <openssl/buffer.h>
#include <openssl/rand.h>
#include <openssl/objects.h>
#include <openssl/evp.h>
#include <openssl/md5.h>
#include <openssl/bn.h>
#ifndef OPENSSL_NO_DH
# include <openssl/dh.h>
#endif
static const SSL_METHOD *dtls1_get_client_method(int ver);
static int dtls1_get_hello_verify(SSL *s);
static const SSL_METHOD *dtls1_get_client_method(int ver)
{
if (ver == DTLS1_VERSION || ver == DTLS1_BAD_VER)
return (DTLSv1_client_method());
else if (ver == DTLS1_2_VERSION)
return (DTLSv1_2_client_method());
else
return (NULL);
}
IMPLEMENT_dtls1_meth_func(DTLS1_VERSION,
DTLSv1_client_method,
ssl_undefined_function,
dtls1_connect,
dtls1_get_client_method, DTLSv1_enc_data)
IMPLEMENT_dtls1_meth_func(DTLS1_2_VERSION,
DTLSv1_2_client_method,
ssl_undefined_function,
dtls1_connect,
dtls1_get_client_method, DTLSv1_2_enc_data)
IMPLEMENT_dtls1_meth_func(DTLS_ANY_VERSION,
DTLS_client_method,
ssl_undefined_function,
dtls1_connect,
dtls1_get_client_method, DTLSv1_2_enc_data)
int dtls1_connect(SSL *s)
{
BUF_MEM *buf = NULL;
unsigned long Time = (unsigned long)time(NULL);
void (*cb) (const SSL *ssl, int type, int val) = NULL;
int ret = -1;
int new_state, state, skip = 0;
#ifndef OPENSSL_NO_SCTP
unsigned char sctpauthkey[64];
char labelbuffer[sizeof(DTLS1_SCTP_AUTH_LABEL)];
#endif
RAND_add(&Time, sizeof(Time), 0);
ERR_clear_error();
clear_sys_error();
if (s->info_callback != NULL)
cb = s->info_callback;
else if (s->ctx->info_callback != NULL)
cb = s->ctx->info_callback;
s->in_handshake++;
if (!SSL_in_init(s) || SSL_in_before(s)) {
if (!SSL_clear(s))
return -1;
}
#ifndef OPENSSL_NO_SCTP
/*
* Notify SCTP BIO socket to enter handshake mode and prevent stream
* identifier other than 0. Will be ignored if no SCTP is used.
*/
BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SCTP_SET_IN_HANDSHAKE,
s->in_handshake, NULL);
#endif
#ifndef OPENSSL_NO_HEARTBEATS
/*
* If we're awaiting a HeartbeatResponse, pretend we already got and
* don't await it anymore, because Heartbeats don't make sense during
* handshakes anyway.
*/
if (s->tlsext_hb_pending) {
dtls1_stop_timer(s);
s->tlsext_hb_pending = 0;
s->tlsext_hb_seq++;
}
#endif
for (;;) {
state = s->state;
switch (s->state) {
case SSL_ST_RENEGOTIATE:
s->renegotiate = 1;
s->state = SSL_ST_CONNECT;
s->ctx->stats.sess_connect_renegotiate++;
/* break */
case SSL_ST_BEFORE:
case SSL_ST_CONNECT:
case SSL_ST_BEFORE | SSL_ST_CONNECT:
case SSL_ST_OK | SSL_ST_CONNECT:
s->server = 0;
if (cb != NULL)
cb(s, SSL_CB_HANDSHAKE_START, 1);
if ((s->version & 0xff00) != (DTLS1_VERSION & 0xff00) &&
(s->version & 0xff00) != (DTLS1_BAD_VER & 0xff00)) {
SSLerr(SSL_F_DTLS1_CONNECT, ERR_R_INTERNAL_ERROR);
ret = -1;
s->state = SSL_ST_ERR;
goto end;
}
/* s->version=SSL3_VERSION; */
s->type = SSL_ST_CONNECT;
if (s->init_buf == NULL) {
if ((buf = BUF_MEM_new()) == NULL) {
ret = -1;
s->state = SSL_ST_ERR;
goto end;
}
if (!BUF_MEM_grow(buf, SSL3_RT_MAX_PLAIN_LENGTH)) {
ret = -1;
s->state = SSL_ST_ERR;
goto end;
}
s->init_buf = buf;
buf = NULL;
}
if (!ssl3_setup_buffers(s)) {
ret = -1;
s->state = SSL_ST_ERR;
goto end;
}
/* setup buffing BIO */
if (!ssl_init_wbio_buffer(s, 0)) {
ret = -1;
s->state = SSL_ST_ERR;
goto end;
}
/* don't push the buffering BIO quite yet */
s->state = SSL3_ST_CW_CLNT_HELLO_A;
s->ctx->stats.sess_connect++;
s->init_num = 0;
/* mark client_random uninitialized */
memset(s->s3->client_random, 0, sizeof(s->s3->client_random));
s->d1->send_cookie = 0;
s->hit = 0;
s->d1->change_cipher_spec_ok = 0;
/*
* Should have been reset by ssl3_get_finished, too.
*/
s->s3->change_cipher_spec = 0;
break;
#ifndef OPENSSL_NO_SCTP
case DTLS1_SCTP_ST_CR_READ_SOCK:
if (BIO_dgram_sctp_msg_waiting(SSL_get_rbio(s))) {
s->s3->in_read_app_data = 2;
s->rwstate = SSL_READING;
BIO_clear_retry_flags(SSL_get_rbio(s));
BIO_set_retry_read(SSL_get_rbio(s));
ret = -1;
goto end;
}
s->state = s->s3->tmp.next_state;
break;
case DTLS1_SCTP_ST_CW_WRITE_SOCK:
/* read app data until dry event */
ret = BIO_dgram_sctp_wait_for_dry(SSL_get_wbio(s));
if (ret < 0)
goto end;
if (ret == 0) {
s->s3->in_read_app_data = 2;
s->rwstate = SSL_READING;
BIO_clear_retry_flags(SSL_get_rbio(s));
BIO_set_retry_read(SSL_get_rbio(s));
ret = -1;
goto end;
}
s->state = s->d1->next_state;
break;
#endif
case SSL3_ST_CW_CLNT_HELLO_A:
case SSL3_ST_CW_CLNT_HELLO_B:
s->shutdown = 0;
/* every DTLS ClientHello resets Finished MAC */
ssl3_init_finished_mac(s);
dtls1_start_timer(s);
ret = ssl3_client_hello(s);
if (ret <= 0)
goto end;
if (s->d1->send_cookie) {
s->state = SSL3_ST_CW_FLUSH;
s->s3->tmp.next_state = SSL3_ST_CR_SRVR_HELLO_A;
} else
s->state = SSL3_ST_CR_SRVR_HELLO_A;
s->init_num = 0;
#ifndef OPENSSL_NO_SCTP
/* Disable buffering for SCTP */
if (!BIO_dgram_is_sctp(SSL_get_wbio(s))) {
#endif
/*
* turn on buffering for the next lot of output
*/
if (s->bbio != s->wbio)
s->wbio = BIO_push(s->bbio, s->wbio);
#ifndef OPENSSL_NO_SCTP
}
#endif
break;
case SSL3_ST_CR_SRVR_HELLO_A:
case SSL3_ST_CR_SRVR_HELLO_B:
ret = ssl3_get_server_hello(s);
if (ret <= 0)
goto end;
else {
if (s->hit) {
#ifndef OPENSSL_NO_SCTP
/*
* Add new shared key for SCTP-Auth, will be ignored if
* no SCTP used.
*/
snprintf((char *)labelbuffer,
sizeof(DTLS1_SCTP_AUTH_LABEL),
DTLS1_SCTP_AUTH_LABEL);
SSL_export_keying_material(s, sctpauthkey,
sizeof(sctpauthkey),
labelbuffer,
sizeof(labelbuffer), NULL, 0,
0);
BIO_ctrl(SSL_get_wbio(s),
BIO_CTRL_DGRAM_SCTP_ADD_AUTH_KEY,
sizeof(sctpauthkey), sctpauthkey);
#endif
s->state = SSL3_ST_CR_FINISHED_A;
} else
s->state = DTLS1_ST_CR_HELLO_VERIFY_REQUEST_A;
}
s->init_num = 0;
break;
case DTLS1_ST_CR_HELLO_VERIFY_REQUEST_A:
case DTLS1_ST_CR_HELLO_VERIFY_REQUEST_B:
ret = dtls1_get_hello_verify(s);
if (ret <= 0)
goto end;
dtls1_stop_timer(s);
if (s->d1->send_cookie) /* start again, with a cookie */
s->state = SSL3_ST_CW_CLNT_HELLO_A;
else
s->state = SSL3_ST_CR_CERT_A;
s->init_num = 0;
break;
case SSL3_ST_CR_CERT_A:
case SSL3_ST_CR_CERT_B:
/* Check if it is anon DH or PSK */
if (!(s->s3->tmp.new_cipher->algorithm_auth & SSL_aNULL) &&
!(s->s3->tmp.new_cipher->algorithm_mkey & SSL_kPSK)) {
ret = ssl3_get_server_certificate(s);
if (ret <= 0)
goto end;
if (s->tlsext_status_expected)
s->state = SSL3_ST_CR_CERT_STATUS_A;
else
s->state = SSL3_ST_CR_KEY_EXCH_A;
} else {
skip = 1;
s->state = SSL3_ST_CR_KEY_EXCH_A;
}
s->init_num = 0;
break;
case SSL3_ST_CR_KEY_EXCH_A:
case SSL3_ST_CR_KEY_EXCH_B:
ret = ssl3_get_key_exchange(s);
if (ret <= 0)
goto end;
s->state = SSL3_ST_CR_CERT_REQ_A;
s->init_num = 0;
/*
* at this point we check that we have the required stuff from
* the server
*/
if (!ssl3_check_cert_and_algorithm(s)) {
ret = -1;
s->state = SSL_ST_ERR;
goto end;
}
break;
case SSL3_ST_CR_CERT_REQ_A:
case SSL3_ST_CR_CERT_REQ_B:
ret = ssl3_get_certificate_request(s);
if (ret <= 0)
goto end;
s->state = SSL3_ST_CR_SRVR_DONE_A;
s->init_num = 0;
break;
case SSL3_ST_CR_SRVR_DONE_A:
case SSL3_ST_CR_SRVR_DONE_B:
ret = ssl3_get_server_done(s);
if (ret <= 0)
goto end;
dtls1_stop_timer(s);
if (s->s3->tmp.cert_req)
s->s3->tmp.next_state = SSL3_ST_CW_CERT_A;
else
s->s3->tmp.next_state = SSL3_ST_CW_KEY_EXCH_A;
s->init_num = 0;
#ifndef OPENSSL_NO_SCTP
if (BIO_dgram_is_sctp(SSL_get_wbio(s)) &&
state == SSL_ST_RENEGOTIATE)
s->state = DTLS1_SCTP_ST_CR_READ_SOCK;
else
#endif
s->state = s->s3->tmp.next_state;
break;
case SSL3_ST_CW_CERT_A:
case SSL3_ST_CW_CERT_B:
case SSL3_ST_CW_CERT_C:
case SSL3_ST_CW_CERT_D:
dtls1_start_timer(s);
ret = ssl3_send_client_certificate(s);
if (ret <= 0)
goto end;
s->state = SSL3_ST_CW_KEY_EXCH_A;
s->init_num = 0;
break;
case SSL3_ST_CW_KEY_EXCH_A:
case SSL3_ST_CW_KEY_EXCH_B:
dtls1_start_timer(s);
ret = ssl3_send_client_key_exchange(s);
if (ret <= 0)
goto end;
#ifndef OPENSSL_NO_SCTP
/*
* Add new shared key for SCTP-Auth, will be ignored if no SCTP
* used.
*/
snprintf((char *)labelbuffer, sizeof(DTLS1_SCTP_AUTH_LABEL),
DTLS1_SCTP_AUTH_LABEL);
SSL_export_keying_material(s, sctpauthkey,
sizeof(sctpauthkey), labelbuffer,
sizeof(labelbuffer), NULL, 0, 0);
BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SCTP_ADD_AUTH_KEY,
sizeof(sctpauthkey), sctpauthkey);
#endif
/*
* EAY EAY EAY need to check for DH fix cert sent back
*/
/*
* For TLS, cert_req is set to 2, so a cert chain of nothing is
* sent, but no verify packet is sent
*/
if (s->s3->tmp.cert_req == 1) {
s->state = SSL3_ST_CW_CERT_VRFY_A;
} else {
#ifndef OPENSSL_NO_SCTP
if (BIO_dgram_is_sctp(SSL_get_wbio(s))) {
s->d1->next_state = SSL3_ST_CW_CHANGE_A;
s->state = DTLS1_SCTP_ST_CW_WRITE_SOCK;
} else
#endif
s->state = SSL3_ST_CW_CHANGE_A;
}
s->init_num = 0;
break;
case SSL3_ST_CW_CERT_VRFY_A:
case SSL3_ST_CW_CERT_VRFY_B:
dtls1_start_timer(s);
ret = ssl3_send_client_verify(s);
if (ret <= 0)
goto end;
#ifndef OPENSSL_NO_SCTP
if (BIO_dgram_is_sctp(SSL_get_wbio(s))) {
s->d1->next_state = SSL3_ST_CW_CHANGE_A;
s->state = DTLS1_SCTP_ST_CW_WRITE_SOCK;
} else
#endif
s->state = SSL3_ST_CW_CHANGE_A;
s->init_num = 0;
break;
case SSL3_ST_CW_CHANGE_A:
case SSL3_ST_CW_CHANGE_B:
if (!s->hit)
dtls1_start_timer(s);
ret = dtls1_send_change_cipher_spec(s,
SSL3_ST_CW_CHANGE_A,
SSL3_ST_CW_CHANGE_B);
if (ret <= 0)
goto end;
s->state = SSL3_ST_CW_FINISHED_A;
s->init_num = 0;
s->session->cipher = s->s3->tmp.new_cipher;
#ifdef OPENSSL_NO_COMP
s->session->compress_meth = 0;
#else
if (s->s3->tmp.new_compression == NULL)
s->session->compress_meth = 0;
else
s->session->compress_meth = s->s3->tmp.new_compression->id;
#endif
if (!s->method->ssl3_enc->setup_key_block(s)) {
ret = -1;
s->state = SSL_ST_ERR;
goto end;
}
if (!s->method->ssl3_enc->change_cipher_state(s,
SSL3_CHANGE_CIPHER_CLIENT_WRITE))
{
ret = -1;
s->state = SSL_ST_ERR;
goto end;
}
#ifndef OPENSSL_NO_SCTP
if (s->hit) {
/*
* Change to new shared key of SCTP-Auth, will be ignored if
* no SCTP used.
*/
BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SCTP_NEXT_AUTH_KEY,
0, NULL);
}
#endif
dtls1_reset_seq_numbers(s, SSL3_CC_WRITE);
break;
case SSL3_ST_CW_FINISHED_A:
case SSL3_ST_CW_FINISHED_B:
if (!s->hit)
dtls1_start_timer(s);
ret = ssl3_send_finished(s,
SSL3_ST_CW_FINISHED_A,
SSL3_ST_CW_FINISHED_B,
s->method->
ssl3_enc->client_finished_label,
s->method->
ssl3_enc->client_finished_label_len);
if (ret <= 0)
goto end;
s->state = SSL3_ST_CW_FLUSH;
if (s->hit) {
s->s3->tmp.next_state = SSL_ST_OK;
#ifndef OPENSSL_NO_SCTP
if (BIO_dgram_is_sctp(SSL_get_wbio(s))) {
s->d1->next_state = s->s3->tmp.next_state;
s->s3->tmp.next_state = DTLS1_SCTP_ST_CW_WRITE_SOCK;
}
#endif
} else {
#ifndef OPENSSL_NO_SCTP
/*
* Change to new shared key of SCTP-Auth, will be ignored if
* no SCTP used.
*/
BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SCTP_NEXT_AUTH_KEY,
0, NULL);
#endif
/*
* Allow NewSessionTicket if ticket expected
*/
if (s->tlsext_ticket_expected)
s->s3->tmp.next_state = SSL3_ST_CR_SESSION_TICKET_A;
else
s->s3->tmp.next_state = SSL3_ST_CR_FINISHED_A;
}
s->init_num = 0;
break;
case SSL3_ST_CR_SESSION_TICKET_A:
case SSL3_ST_CR_SESSION_TICKET_B:
ret = ssl3_get_new_session_ticket(s);
if (ret <= 0)
goto end;
s->state = SSL3_ST_CR_FINISHED_A;
s->init_num = 0;
break;
case SSL3_ST_CR_CERT_STATUS_A:
case SSL3_ST_CR_CERT_STATUS_B:
ret = ssl3_get_cert_status(s);
if (ret <= 0)
goto end;
s->state = SSL3_ST_CR_KEY_EXCH_A;
s->init_num = 0;
break;
case SSL3_ST_CR_FINISHED_A:
case SSL3_ST_CR_FINISHED_B:
s->d1->change_cipher_spec_ok = 1;
ret = ssl3_get_finished(s, SSL3_ST_CR_FINISHED_A,
SSL3_ST_CR_FINISHED_B);
if (ret <= 0)
goto end;
dtls1_stop_timer(s);
if (s->hit)
s->state = SSL3_ST_CW_CHANGE_A;
else
s->state = SSL_ST_OK;
#ifndef OPENSSL_NO_SCTP
if (BIO_dgram_is_sctp(SSL_get_wbio(s)) &&
state == SSL_ST_RENEGOTIATE) {
s->d1->next_state = s->state;
s->state = DTLS1_SCTP_ST_CW_WRITE_SOCK;
}
#endif
s->init_num = 0;
break;
case SSL3_ST_CW_FLUSH:
s->rwstate = SSL_WRITING;
if (BIO_flush(s->wbio) <= 0) {
/*
* If the write error was fatal, stop trying
*/
if (!BIO_should_retry(s->wbio)) {
s->rwstate = SSL_NOTHING;
s->state = s->s3->tmp.next_state;
}
ret = -1;
goto end;
}
s->rwstate = SSL_NOTHING;
s->state = s->s3->tmp.next_state;
break;
case SSL_ST_OK:
/* clean a few things up */
ssl3_cleanup_key_block(s);
/* Remove the buffering */
ssl_free_wbio_buffer(s);
s->init_num = 0;
s->renegotiate = 0;
s->new_session = 0;
ssl_update_cache(s, SSL_SESS_CACHE_CLIENT);
if (s->hit)
s->ctx->stats.sess_hit++;
ret = 1;
/* s->server=0; */
s->handshake_func = dtls1_connect;
s->ctx->stats.sess_connect_good++;
if (cb != NULL)
cb(s, SSL_CB_HANDSHAKE_DONE, 1);
/* done with handshaking */
s->d1->handshake_read_seq = 0;
s->d1->next_handshake_write_seq = 0;
goto end;
/* break; */
case SSL_ST_ERR:
default:
SSLerr(SSL_F_DTLS1_CONNECT, SSL_R_UNKNOWN_STATE);
ret = -1;
goto end;
/* break; */
}
/* did we do anything */
if (!s->s3->tmp.reuse_message && !skip) {
if (s->debug) {
if ((ret = BIO_flush(s->wbio)) <= 0)
goto end;
}
if ((cb != NULL) && (s->state != state)) {
new_state = s->state;
s->state = state;
cb(s, SSL_CB_CONNECT_LOOP, 1);
s->state = new_state;
}
}
skip = 0;
}
end:
s->in_handshake--;
#ifndef OPENSSL_NO_SCTP
/*
* Notify SCTP BIO socket to leave handshake mode and allow stream
* identifier other than 0. Will be ignored if no SCTP is used.
*/
BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SCTP_SET_IN_HANDSHAKE,
s->in_handshake, NULL);
#endif
BUF_MEM_free(buf);
if (cb != NULL)
cb(s, SSL_CB_CONNECT_EXIT, ret);
return (ret);
}
static int dtls1_get_hello_verify(SSL *s)
{
int n, al, ok = 0;
unsigned char *data;
unsigned int cookie_len;
s->first_packet = 1;
n = s->method->ssl_get_message(s,
DTLS1_ST_CR_HELLO_VERIFY_REQUEST_A,
DTLS1_ST_CR_HELLO_VERIFY_REQUEST_B,
-1, s->max_cert_list, &ok);
s->first_packet = 0;
if (!ok)
return ((int)n);
if (s->s3->tmp.message_type != DTLS1_MT_HELLO_VERIFY_REQUEST) {
s->d1->send_cookie = 0;
s->s3->tmp.reuse_message = 1;
return (1);
}
data = (unsigned char *)s->init_msg;
data += 2;
cookie_len = *(data++);
if (cookie_len > sizeof(s->d1->cookie)) {
al = SSL_AD_ILLEGAL_PARAMETER;
goto f_err;
}
memcpy(s->d1->cookie, data, cookie_len);
s->d1->cookie_len = cookie_len;
s->d1->send_cookie = 1;
return 1;
f_err:
ssl3_send_alert(s, SSL3_AL_FATAL, al);
s->state = SSL_ST_ERR;
return -1;
}
Reference in a new issue View git blame Copy permalink