wbrawner/openssl
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
openssl/test/recipes/80-test_ssl_old.t
Emilia Kasper 63936115e8 Update client authentication tests 
Port client auth tests to the new framework, add coverage. The old tests
were only testing success, and only for some protocol versions; the new
tests add all protocol versions and various failure modes.

Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-03 11:59:46 +02:00

800 lines
31 KiB
Perl
Raw Blame History

#! /usr/bin/env perl
# Copyright 2015-2016 The OpenSSL Project Authors. All Rights Reserved.
#
# Licensed under the OpenSSL license (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
# in the file LICENSE in the source distribution or at
# https://www.openssl.org/source/license.html
use strict;
use warnings;
use POSIX;
use File::Spec;
use File::Copy;
use OpenSSL::Test qw/:DEFAULT with bldtop_file srctop_file cmdstr/;
use OpenSSL::Test::Utils;
setup("test_ssl");
$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
my ($no_rsa, $no_dsa, $no_dh, $no_ec, $no_srp, $no_psk,
$no_ssl3, $no_tls1, $no_tls1_1, $no_tls1_2,
$no_dtls, $no_dtls1, $no_dtls1_2, $no_ct) =
anydisabled qw/rsa dsa dh ec srp psk
ssl3 tls1 tls1_1 tls1_2
dtls dtls1 dtls1_2 ct/;
my $no_anytls = alldisabled(available_protocols("tls"));
my $no_anydtls = alldisabled(available_protocols("dtls"));
plan skip_all => "No SSL/TLS/DTLS protocol is support by this OpenSSL build"
if $no_anytls && $no_anydtls;
my $digest = "-sha1";
my @reqcmd = ("openssl", "req");
my @x509cmd = ("openssl", "x509", $digest);
my @verifycmd = ("openssl", "verify");
my @gendsacmd = ("openssl", "gendsa");
my $dummycnf = srctop_file("apps", "openssl.cnf");
my $CAkey = "keyCA.ss";
my $CAcert="certCA.ss";
my $CAserial="certCA.srl";
my $CAreq="reqCA.ss";
my $CAconf=srctop_file("test","CAss.cnf");
my $CAreq2="req2CA.ss"; # temp
my $Uconf=srctop_file("test","Uss.cnf");
my $Ukey="keyU.ss";
my $Ureq="reqU.ss";
my $Ucert="certU.ss";
my $Dkey="keyD.ss";
my $Dreq="reqD.ss";
my $Dcert="certD.ss";
my $Ekey="keyE.ss";
my $Ereq="reqE.ss";
my $Ecert="certE.ss";
my $P1conf=srctop_file("test","P1ss.cnf");
my $P1key="keyP1.ss";
my $P1req="reqP1.ss";
my $P1cert="certP1.ss";
my $P1intermediate="tmp_intP1.ss";
my $P2conf=srctop_file("test","P2ss.cnf");
my $P2key="keyP2.ss";
my $P2req="reqP2.ss";
my $P2cert="certP2.ss";
my $P2intermediate="tmp_intP2.ss";
my $server_sess="server.ss";
my $client_sess="client.ss";
# ssltest_old.c is deprecated in favour of the new framework in ssl_test.c
# If you're adding tests here, you probably want to convert them to the
# new format in ssl_test.c and add recipes to 80-test_ssl_new.t instead.
plan tests =>
1 # For testss
+ 14 # For the first testssl
;
subtest 'test_ss' => sub {
if (testss()) {
open OUT, ">", "intP1.ss";
copy($CAcert, \*OUT); copy($Ucert, \*OUT);
close OUT;
open OUT, ">", "intP2.ss";
copy($CAcert, \*OUT); copy($Ucert, \*OUT); copy($P1cert, \*OUT);
close OUT;
}
};
note('test_ssl -- key U');
testssl("keyU.ss", $Ucert, $CAcert);
# -----------
# subtest functions
sub testss {
open RND, ">>", ".rnd";
print RND "string to make the random number generator think it has entropy";
close RND;
my @req_dsa = ("-newkey",
"dsa:".srctop_file("apps", "dsa1024.pem"));
my $dsaparams = srctop_file("apps", "dsa1024.pem");
my @req_new;
if ($no_rsa) {
@req_new = @req_dsa;
} else {
@req_new = ("-new");
}
plan tests => 17;
SKIP: {
skip 'failure', 16 unless
ok(run(app([@reqcmd, "-config", $CAconf,
"-out", $CAreq, "-keyout", $CAkey,
@req_new])),
'make cert request');
skip 'failure', 15 unless
ok(run(app([@x509cmd, "-CAcreateserial", "-in", $CAreq, "-days", "30",
"-req", "-out", $CAcert, "-signkey", $CAkey,
"-extfile", $CAconf, "-extensions", "v3_ca"],
stdout => "err.ss")),
'convert request into self-signed cert');
skip 'failure', 14 unless
ok(run(app([@x509cmd, "-in", $CAcert,
"-x509toreq", "-signkey", $CAkey, "-out", $CAreq2],
stdout => "err.ss")),
'convert cert into a cert request');
skip 'failure', 13 unless
ok(run(app([@reqcmd, "-config", $dummycnf,
"-verify", "-in", $CAreq, "-noout"])),
'verify request 1');
skip 'failure', 12 unless
ok(run(app([@reqcmd, "-config", $dummycnf,
"-verify", "-in", $CAreq2, "-noout"])),
'verify request 2');
skip 'failure', 11 unless
ok(run(app([@verifycmd, "-CAfile", $CAcert, $CAcert])),
'verify signature');
skip 'failure', 10 unless
ok(run(app([@reqcmd, "-config", $Uconf,
"-out", $Ureq, "-keyout", $Ukey, @req_new],
stdout => "err.ss")),
'make a user cert request');
skip 'failure', 9 unless
ok(run(app([@x509cmd, "-CAcreateserial", "-in", $Ureq, "-days", "30",
"-req", "-out", $Ucert,
"-CA", $CAcert, "-CAkey", $CAkey, "-CAserial", $CAserial,
"-extfile", $Uconf, "-extensions", "v3_ee"],
stdout => "err.ss"))
&& run(app([@verifycmd, "-CAfile", $CAcert, $Ucert])),
'sign user cert request');
skip 'failure', 8 unless
ok(run(app([@x509cmd,
"-subject", "-issuer", "-startdate", "-enddate",
"-noout", "-in", $Ucert])),
'Certificate details');
skip 'failure', 7 unless
subtest 'DSA certificate creation' => sub {
plan skip_all => "skipping DSA certificate creation"
if $no_dsa;
plan tests => 5;
SKIP: {
$ENV{CN2} = "DSA Certificate";
skip 'failure', 4 unless
ok(run(app([@gendsacmd, "-out", $Dkey,
$dsaparams],
stdout => "err.ss")),
"make a DSA key");
skip 'failure', 3 unless
ok(run(app([@reqcmd, "-new", "-config", $Uconf,
"-out", $Dreq, "-key", $Dkey],
stdout => "err.ss")),
"make a DSA user cert request");
skip 'failure', 2 unless
ok(run(app([@x509cmd, "-CAcreateserial",
"-in", $Dreq,
"-days", "30",
"-req",
"-out", $Dcert,
"-CA", $CAcert, "-CAkey", $CAkey,
"-CAserial", $CAserial,
"-extfile", $Uconf,
"-extensions", "v3_ee_dsa"],
stdout => "err.ss")),
"sign DSA user cert request");
skip 'failure', 1 unless
ok(run(app([@verifycmd, "-CAfile", $CAcert, $Dcert])),
"verify DSA user cert");
skip 'failure', 0 unless
ok(run(app([@x509cmd,
"-subject", "-issuer",
"-startdate", "-enddate", "-noout",
"-in", $Dcert])),
"DSA Certificate details");
}
};
skip 'failure', 6 unless
subtest 'ECDSA/ECDH certificate creation' => sub {
plan skip_all => "skipping ECDSA/ECDH certificate creation"
if $no_ec;
plan tests => 5;
SKIP: {
$ENV{CN2} = "ECDSA Certificate";
skip 'failure', 4 unless
ok(run(app(["openssl", "ecparam", "-name", "P-256",
"-out", "ecp.ss"])),
"make EC parameters");
skip 'failure', 3 unless
ok(run(app([@reqcmd, "-config", $Uconf,
"-out", $Ereq, "-keyout", $Ekey,
"-newkey", "ec:ecp.ss"],
stdout => "err.ss")),
"make a ECDSA/ECDH user cert request");
skip 'failure', 2 unless
ok(run(app([@x509cmd, "-CAcreateserial",
"-in", $Ereq,
"-days", "30",
"-req",
"-out", $Ecert,
"-CA", $CAcert, "-CAkey", $CAkey,
"-CAserial", $CAserial,
"-extfile", $Uconf,
"-extensions", "v3_ee_ec"],
stdout => "err.ss")),
"sign ECDSA/ECDH user cert request");
skip 'failure', 1 unless
ok(run(app([@verifycmd, "-CAfile", $CAcert, $Ecert])),
"verify ECDSA/ECDH user cert");
skip 'failure', 0 unless
ok(run(app([@x509cmd,
"-subject", "-issuer",
"-startdate", "-enddate", "-noout",
"-in", $Ecert])),
"ECDSA Certificate details");
}
};
skip 'failure', 5 unless
ok(run(app([@reqcmd, "-config", $P1conf,
"-out", $P1req, "-keyout", $P1key, @req_new],
stdout => "err.ss")),
'make a proxy cert request');
skip 'failure', 4 unless
ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P1req, "-days", "30",
"-req", "-out", $P1cert,
"-CA", $Ucert, "-CAkey", $Ukey,
"-extfile", $P1conf, "-extensions", "v3_proxy"],
stdout => "err.ss")),
'sign proxy with user cert');
copy($Ucert, $P1intermediate);
run(app([@verifycmd, "-CAfile", $CAcert,
"-untrusted", $P1intermediate, $P1cert]));
ok(run(app([@x509cmd,
"-subject", "-issuer", "-startdate", "-enddate",
"-noout", "-in", $P1cert])),
'Certificate details');
skip 'failure', 2 unless
ok(run(app([@reqcmd, "-config", $P2conf,
"-out", $P2req, "-keyout", $P2key,
@req_new],
stdout => "err.ss")),
'make another proxy cert request');
skip 'failure', 1 unless
ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P2req, "-days", "30",
"-req", "-out", $P2cert,
"-CA", $P1cert, "-CAkey", $P1key,
"-extfile", $P2conf, "-extensions", "v3_proxy"],
stdout => "err.ss")),
'sign second proxy cert request with the first proxy cert');
open OUT, ">", $P2intermediate;
copy($Ucert, \*OUT); copy($P1cert, \*OUT);
close OUT;
run(app([@verifycmd, "-CAfile", $CAcert,
"-untrusted", $P2intermediate, $P2cert]));
ok(run(app([@x509cmd,
"-subject", "-issuer", "-startdate", "-enddate",
"-noout", "-in", $P2cert])),
'Certificate details');
}
}
sub testssl {
my ($key, $cert, $CAtmp) = @_;
my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", bldtop_dir("certs"));
my @ssltest = ("ssltest_old",
"-s_key", $key, "-s_cert", $cert,
"-c_key", $key, "-c_cert", $cert);
my $serverinfo = srctop_file("test","serverinfo.pem");
my $dsa_cert = 0;
if (grep /DSA Public Key/, run(app(["openssl", "x509", "-in", $cert,
"-text", "-noout"]), capture => 1)) {
$dsa_cert = 1;
}
# plan tests => 11;
subtest 'standard SSL tests' => sub {
######################################################################
plan tests => 21;
SKIP: {
skip "SSLv3 is not supported by this OpenSSL build", 4
if disabled("ssl3");
ok(run(test([@ssltest, "-bio_pair", "-ssl3"])),
'test sslv3 via BIO pair');
ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA])),
'test sslv3 with server authentication via BIO pair');
ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA])),
'test sslv3 with client authentication via BIO pair');
ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA])),
'test sslv3 with both server and client authentication via BIO pair');
}
SKIP: {
skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 1
if $no_anytls;
ok(run(test([@ssltest, "-bio_pair"])),
'test sslv2/sslv3 via BIO pair');
}
SKIP: {
skip "DTLSv1 is not supported by this OpenSSL build", 4
if disabled("dtls1");
ok(run(test([@ssltest, "-dtls1"])),
'test dtlsv1');
ok(run(test([@ssltest, "-dtls1", "-server_auth", @CA])),
'test dtlsv1 with server authentication');
ok(run(test([@ssltest, "-dtls1", "-client_auth", @CA])),
'test dtlsv1 with client authentication');
ok(run(test([@ssltest, "-dtls1", "-server_auth", "-client_auth", @CA])),
'test dtlsv1 with both server and client authentication');
}
SKIP: {
skip "DTLSv1.2 is not supported by this OpenSSL build", 4
if disabled("dtls1_2");
ok(run(test([@ssltest, "-dtls12"])),
'test dtlsv1.2');
ok(run(test([@ssltest, "-dtls12", "-server_auth", @CA])),
'test dtlsv1.2 with server authentication');
ok(run(test([@ssltest, "-dtls12", "-client_auth", @CA])),
'test dtlsv1.2 with client authentication');
ok(run(test([@ssltest, "-dtls12", "-server_auth", "-client_auth", @CA])),
'test dtlsv1.2 with both server and client authentication');
}
SKIP: {
skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 8
if $no_anytls;
SKIP: {
skip "skipping test of sslv2/sslv3 w/o (EC)DHE test", 1 if $dsa_cert;
ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe"])),
'test sslv2/sslv3 w/o (EC)DHE via BIO pair');
}
ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v"])),
'test sslv2/sslv3 with 1024bit DHE via BIO pair');
ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA])),
'test sslv2/sslv3 with server authentication');
ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA])),
'test sslv2/sslv3 with client authentication via BIO pair');
ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA])),
'test sslv2/sslv3 with both client and server authentication via BIO pair');
ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA])),
'test sslv2/sslv3 with both client and server authentication via BIO pair and app verify');
SKIP: {
skip "No IPv4 available on this machine", 1
unless !disabled("sock") && have_IPv4();
ok(run(test([@ssltest, "-ipv4"])),
'test TLS via IPv4');
}
SKIP: {
skip "No IPv6 available on this machine", 1
unless !disabled("sock") && have_IPv6();
ok(run(test([@ssltest, "-ipv6"])),
'test TLS via IPv6');
}
}
};
subtest "Testing ciphersuites" => sub {
my @exkeys = ();
my $ciphers = "-EXP:-PSK:-SRP:-kDH:-kECDHe";
if ($no_dh) {
note "skipping DHE tests\n";
$ciphers .= ":-kDHE";
}
if ($no_dsa) {
note "skipping DSA tests\n";
$ciphers .= ":-aDSA";
} else {
push @exkeys, "-s_cert", "certD.ss", "-s_key", "keyD.ss";
}
if ($no_ec) {
note "skipping EC tests\n";
$ciphers .= ":!aECDSA:!kECDH";
} else {
push @exkeys, "-s_cert", "certE.ss", "-s_key", "keyE.ss";
}
my @protocols = ();
# FIXME: I feel unsure about the following line, is that really just TLSv1.2, or is it all of the SSLv3/TLS protocols?
push(@protocols, "TLSv1.2") unless $no_tls1_2;
push(@protocols, "SSLv3") unless $no_ssl3;
my $protocolciphersuitcount = 0;
my %ciphersuites =
map { my @c =
map { split(/:/, $_) }
run(app(["openssl", "ciphers", "${_}:$ciphers"]),
capture => 1);
map { s/\R//; } @c; # chomp @c;
$protocolciphersuitcount += scalar @c;
$_ => [ @c ] } @protocols;
plan skip_all => "None of the ciphersuites to test are available in this OpenSSL build"
if $protocolciphersuitcount + scalar(@protocols) == 0;
# The count of protocols is because in addition to the ciphersuits
# we got above, we're running a weak DH test for each protocol
plan tests => $protocolciphersuitcount + scalar(@protocols);
foreach my $protocol (@protocols) {
note "Testing ciphersuites for $protocol";
foreach my $cipher (@{$ciphersuites{$protocol}}) {
ok(run(test([@ssltest, @exkeys, "-cipher", $cipher,
$protocol eq "SSLv3" ? ("-ssl3") : ()])),
"Testing $cipher");
}
is(run(test([@ssltest,
"-s_cipher", "EDH",
"-c_cipher", 'EDH:@SECLEVEL=1',
"-dhe512",
$protocol eq "SSLv3" ? ("-ssl3") : ()])), 0,
"testing connection with weak DH, expecting failure");
}
};
subtest 'RSA/(EC)DHE/PSK tests' => sub {
######################################################################
plan tests => 5;
SKIP: {
skip "TLSv1.0 is not supported by this OpenSSL build", 5
if $no_tls1;
SKIP: {
skip "skipping anonymous DH tests", 1
if ($no_dh);
ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time"])),
'test tlsv1 with 1024bit anonymous DH, multiple handshakes');
}
SKIP: {
skip "skipping RSA tests", 2
if $no_rsa;
ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time"])),
'test tlsv1 with 1024bit RSA, no (EC)DHE, multiple handshakes');
skip "skipping RSA+DHE tests", 1
if $no_dh;
ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time"])),
'test tlsv1 with 1024bit RSA, 1024bit DHE, multiple handshakes');
}
SKIP: {
skip "skipping PSK tests", 2
if ($no_psk);
ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123"])),
'test tls1 with PSK');
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123"])),
'test tls1 with PSK via BIO pair');
}
}
};
subtest 'Next Protocol Negotiation Tests' => sub {
######################################################################
plan tests => 7;
SKIP: {
skip "TLSv1.0 is not supported by this OpenSSL build", 7
if $no_tls1;
skip "Next Protocol Negotiation is not supported by this OpenSSL build", 7
if disabled("nextprotoneg");
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_server"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_server_reject"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server_reject"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server", "-num", "2"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server", "-num", "2", "-reuse"])));
}
};
subtest 'Custom Extension tests' => sub {
######################################################################
plan tests => 1;
SKIP: {
skip "TLSv1.0 is not supported by this OpenSSL build", 1
if $no_tls1;
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext"])),
'test tls1 with custom extensions');
}
};
subtest 'Serverinfo tests' => sub {
######################################################################
plan tests => 5;
SKIP: {
skip "TLSv1.0 is not supported by this OpenSSL build", 5
if $no_tls1;
note('echo test tls1 with serverinfo');
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_tack"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
}
};
subtest 'SNI tests' => sub {
plan tests => 7;
SKIP: {
skip "TLSv1.x is not supported by this OpenSSL build", 7
if $no_tls1 && $no_tls1_1 && $no_tls1_2;
ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo"])));
ok(run(test([@ssltest, "-bio_pair", "-sn_server1", "foo"])));
ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo", "-sn_server1", "foo", "-sn_expect1"])));
ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo", "-sn_server1", "bar", "-sn_expect1"])));
ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo", "-sn_server1", "foo", "-sn_server2", "bar", "-sn_expect1"])));
ok(run(test([@ssltest, "-bio_pair", "-sn_client", "bar", "-sn_server1", "foo", "-sn_server2", "bar", "-sn_expect2"])));
# Negative test - make sure it doesn't crash, and doesn't switch contexts
ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foobar", "-sn_server1", "foo", "-sn_server2", "bar", "-sn_expect1"])));
}
};
subtest 'ALPN tests' => sub {
######################################################################
plan tests => 13;
SKIP: {
skip "TLSv1.0 is not supported by this OpenSSL build", 13
if $no_tls1;
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_server", "foo"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo", "-alpn_server", "foo", "-alpn_expected", "foo"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo,bar", "-alpn_server", "foo", "-alpn_expected", "foo"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "foo", "-alpn_expected", "foo"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "foo,bar", "-alpn_expected", "foo"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "bar,foo", "-alpn_expected", "bar"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo,bar", "-alpn_server", "bar,foo", "-alpn_expected", "bar"])));
is(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo", "-alpn_server", "bar"])), 0,
"Testing ALPN with protocol mismatch, expecting failure");
is(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "baz", "-alpn_server", "bar,foo"])), 0,
"Testing ALPN with protocol mismatch, expecting failure");
# ALPN + SNI
ok(run(test([@ssltest, "-bio_pair",
"-alpn_client", "foo,bar", "-sn_client", "alice",
"-alpn_server1", "foo,123", "-sn_server1", "alice",
"-alpn_server2", "bar,456", "-sn_server2", "bob",
"-alpn_expected", "foo"])));
ok(run(test([@ssltest, "-bio_pair",
"-alpn_client", "foo,bar", "-sn_client", "bob",
"-alpn_server1", "foo,123", "-sn_server1", "alice",
"-alpn_server2", "bar,456", "-sn_server2", "bob",
"-alpn_expected", "bar"])));
ok(run(test([@ssltest, "-bio_pair",
"-alpn_client", "foo,bar", "-sn_client", "bob",
"-alpn_server2", "bar,456", "-sn_server2", "bob",
"-alpn_expected", "bar"])));
}
};
subtest 'SRP tests' => sub {
plan tests => 4;
SKIP: {
skip "skipping SRP tests", 4
if $no_srp;
ok(run(test([@ssltest, "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
'test tls1 with SRP');
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
'test tls1 with SRP via BIO pair');
ok(run(test([@ssltest, "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])),
'test tls1 with SRP auth');
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])),
'test tls1 with SRP auth via BIO pair');
}
};
subtest 'Multi-buffer tests' => sub {
######################################################################
plan tests => 2;
SKIP: {
skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 2
if $no_anytls;
skip "skipping multi-buffer tests", 2
if (POSIX::uname())[4] ne "x86_64";
ok(run(test([@ssltest, "-cipher", "AES128-SHA", "-bytes", "8m"])));
# We happen to know that AES128-SHA256 is TLSv1.2 only... for now.
skip "TLSv1.2 is not supported by this OpenSSL configuration", 1
if $no_tls1_2;
ok(run(test([@ssltest, "-cipher", "AES128-SHA256", "-bytes", "8m"])));
}
};
subtest 'DTLS Version min/max tests' => sub {
my @protos;
push(@protos, "dtls1") unless ($no_dtls1 || $no_dtls);
push(@protos, "dtls1.2") unless ($no_dtls1_2 || $no_dtls);
my @minprotos = (undef, @protos);
my @maxprotos = (@protos, undef);
my @shdprotos = (@protos, $protos[$#protos]);
my $n = ((@protos+2) * (@protos+3))/2 - 2;
my $ntests = $n * $n;
plan tests => $ntests;
SKIP: {
skip "DTLS disabled", 1 if $ntests == 1;
my $should;
for (my $smin = 0; $smin < @minprotos; ++$smin) {
for (my $smax = $smin ? $smin - 1 : 0; $smax < @maxprotos; ++$smax) {
for (my $cmin = 0; $cmin < @minprotos; ++$cmin) {
for (my $cmax = $cmin ? $cmin - 1 : 0; $cmax < @maxprotos; ++$cmax) {
if ($cmax < $smin-1) {
$should = "fail-server";
} elsif ($smax < $cmin-1) {
$should = "fail-client";
} elsif ($cmax > $smax) {
$should = $shdprotos[$smax];
} else {
$should = $shdprotos[$cmax];
}
my @args = (@ssltest, "-dtls");
push(@args, "-should_negotiate", $should);
push(@args, "-server_min_proto", $minprotos[$smin])
if (defined($minprotos[$smin]));
push(@args, "-server_max_proto", $maxprotos[$smax])
if (defined($maxprotos[$smax]));
push(@args, "-client_min_proto", $minprotos[$cmin])
if (defined($minprotos[$cmin]));
push(@args, "-client_max_proto", $maxprotos[$cmax])
if (defined($maxprotos[$cmax]));
my $ok = run(test[@args]);
if (! $ok) {
print STDERR "\nsmin=$smin, smax=$smax, cmin=$cmin, cmax=$cmax\n";
print STDERR "\nFailed: @args\n";
}
ok($ok);
}}}}}
};
subtest 'TLS session reuse' => sub {
plan tests => 12;
SKIP: {
skip "TLS1.1 or TLS1.2 disabled", 12 if $no_tls1_1 || $no_tls1_2;
ok(run(test([@ssltest, "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
ok(run(test([@ssltest, "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "tls1.2"])));
ok(run(test([@ssltest, "-server_max_proto", "tls1.1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "tls1.1"])));
ok(run(test([@ssltest, "-server_max_proto", "tls1.1", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
ok(run(test([@ssltest, "-server_max_proto", "tls1.1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "tls1.1"])));
ok(run(test([@ssltest, "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "tls1.2"])));
ok(run(test([@ssltest, "-no_ticket", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
ok(run(test([@ssltest, "-no_ticket", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "tls1.2"])));
ok(run(test([@ssltest, "-no_ticket", "-server_max_proto", "tls1.1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "tls1.1"])));
ok(run(test([@ssltest, "-no_ticket", "-server_max_proto", "tls1.1", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
ok(run(test([@ssltest, "-no_ticket", "-server_max_proto", "tls1.1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "tls1.1"])));
ok(run(test([@ssltest, "-no_ticket", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "tls1.2"])));
}
};
subtest 'DTLS session reuse' => sub {
plan tests => 12;
SKIP: {
skip "DTLS disabled", 12 if $no_dtls;
ok(run(test([@ssltest, "-dtls", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
ok(run(test([@ssltest, "-dtls", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "dtls1.2"])));
ok(run(test([@ssltest, "-dtls", "-server_max_proto", "dtls1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "dtls1"])));
ok(run(test([@ssltest, "-dtls", "-server_max_proto", "dtls1", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
ok(run(test([@ssltest, "-dtls", "-server_max_proto", "dtls1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "dtls1"])));
ok(run(test([@ssltest, "-dtls", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "dtls1.2"])));
ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "dtls1.2"])));
ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_max_proto", "dtls1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "dtls1"])));
ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_max_proto", "dtls1", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_max_proto", "dtls1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "dtls1"])));
ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "dtls1.2"])));
}
};
subtest 'Certificate Transparency tests' => sub {
######################################################################
plan tests => 3;
SKIP: {
skip "Certificate Transparency is not supported by this OpenSSL build", 3
if $no_ct;
skip "TLSv1.0 is not supported by this OpenSSL build", 3
if $no_tls1;
$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
my @ca = qw(-CAfile certCA.ss);
ok(run(test([@ssltest, @ca, "-bio_pair", "-tls1", "-noct"])));
# No SCTs provided, so this should fail.
ok(run(test([@ssltest, @ca, "-bio_pair", "-tls1", "-ct",
"-should_negotiate", "fail-client"])));
# No SCTs provided, unverified chains still succeed.
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-ct"])));
}
};
}
Reference in a new issue View git blame Copy permalink