wbrawner/openssl
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
openssl/test/recipes/80-test_ssl.t
Richard Levitte 75d5bd4e7d Refactoring BIO: add a test, using test/ssltest 
This adds a couple of simple tests to see that SSL traffic using the
reimplemented BIO_s_accept() and BIO_s_connect() works as expected,
both on IPv4 and on IPv6.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
2016-02-03 19:40:32 +01:00

826 lines
30 KiB
Perl
Raw Blame History

#! /usr/bin/perl
use strict;
use warnings;
use POSIX;
use File::Spec;
use File::Copy;
use OpenSSL::Test qw/:DEFAULT with top_file cmdstr/;
use OpenSSL::Test::Utils;
setup("test_ssl");
my ($no_rsa, $no_dsa, $no_dh, $no_ec, $no_srp, $no_psk,
$no_ssl3, $no_tls1, $no_tls1_1, $no_tls1_2,
$no_dtls, $no_dtls1, $no_dtls1_2) =
anydisabled qw/rsa dsa dh ec srp psk
ssl3 tls1 tls1_1 tls1_2
dtls dtls1 dtls1_2/;
my $no_anytls = alldisabled(available_protocols("tls"));
my $no_anydtls = alldisabled(available_protocols("dtls"));
plan skip_all => "No SSL/TLS/DTLS protocol is support by this OpenSSL build"
if $no_anytls && $no_anydtls;
my $digest = "-sha1";
my @reqcmd = ("openssl", "req");
my @x509cmd = ("openssl", "x509", $digest);
my @verifycmd = ("openssl", "verify");
my $dummycnf = top_file("apps", "openssl.cnf");
my $CAkey = "keyCA.ss";
my $CAcert="certCA.ss";
my $CAserial="certCA.srl";
my $CAreq="reqCA.ss";
my $CAconf=top_file("test","CAss.cnf");
my $CAreq2="req2CA.ss"; # temp
my $Uconf=top_file("test","Uss.cnf");
my $Ukey="keyU.ss";
my $Ureq="reqU.ss";
my $Ucert="certU.ss";
my $Dkey="keyD.ss";
my $Dreq="reqD.ss";
my $Dcert="certD.ss";
my $Ekey="keyE.ss";
my $Ereq="reqE.ss";
my $Ecert="certE.ss";
my $P1conf=top_file("test","P1ss.cnf");
my $P1key="keyP1.ss";
my $P1req="reqP1.ss";
my $P1cert="certP1.ss";
my $P1intermediate="tmp_intP1.ss";
my $P2conf=top_file("test","P2ss.cnf");
my $P2key="keyP2.ss";
my $P2req="reqP2.ss";
my $P2cert="certP2.ss";
my $P2intermediate="tmp_intP2.ss";
plan tests =>
1 # For testss
+ 1 # For ssltest -test_cipherlist
+ 10 # For the first testssl
+ 16 # For the first testsslproxy
+ 16 # For the second testsslproxy
;
subtest 'test_ss' => sub {
if (testss()) {
open OUT, ">", "intP1.ss";
copy($CAcert, \*OUT); copy($Ucert, \*OUT);
close OUT;
open OUT, ">", "intP2.ss";
copy($CAcert, \*OUT); copy($Ucert, \*OUT); copy($P1cert, \*OUT);
close OUT;
}
};
my $check = ok(run(test(["ssltest","-test_cipherlist"])), "running ssltest");
SKIP: {
skip "ssltest ended with error, skipping the rest", 3
if !$check;
note('test_ssl -- key U');
testssl("keyU.ss", $Ucert, $CAcert);
note('test_ssl -- key P1');
testsslproxy("keyP1.ss", "certP1.ss", "intP1.ss", "AB");
note('test_ssl -- key P2');
testsslproxy("keyP2.ss", "certP2.ss", "intP2.ss", "BC");
}
# -----------
# subtest functions
sub testss {
open RND, ">>", ".rnd";
print RND "string to make the random number generator think it has entropy";
close RND;
my @req_dsa = ("-newkey",
"dsa:".File::Spec->catfile("..", "apps", "dsa1024.pem"));;
my @req_new;
if ($no_rsa) {
@req_new = @req_dsa;
} else {
@req_new = ("-new");
}
plan tests => 17;
SKIP: {
skip 'failure', 16 unless
ok(run(app([@reqcmd, "-config", $CAconf,
"-out", $CAreq, "-keyout", $CAkey,
@req_new])),
'make cert request');
skip 'failure', 15 unless
ok(run(app([@x509cmd, "-CAcreateserial", "-in", $CAreq, "-days", "30",
"-req", "-out", $CAcert, "-signkey", $CAkey,
"-extfile", $CAconf, "-extensions", "v3_ca"],
stdout => "err.ss")),
'convert request into self-signed cert');
skip 'failure', 14 unless
ok(run(app([@x509cmd, "-in", $CAcert,
"-x509toreq", "-signkey", $CAkey, "-out", $CAreq2],
stdout => "err.ss")),
'convert cert into a cert request');
skip 'failure', 13 unless
ok(run(app([@reqcmd, "-config", $dummycnf,
"-verify", "-in", $CAreq, "-noout"])),
'verify request 1');
skip 'failure', 12 unless
ok(run(app([@reqcmd, "-config", $dummycnf,
"-verify", "-in", $CAreq2, "-noout"])),
'verify request 2');
skip 'failure', 11 unless
ok(run(app([@verifycmd, "-CAfile", $CAcert, $CAcert])),
'verify signature');
skip 'failure', 10 unless
ok(run(app([@reqcmd, "-config", $Uconf,
"-out", $Ureq, "-keyout", $Ukey, @req_new],
stdout => "err.ss")),
'make a user cert request');
skip 'failure', 9 unless
ok(run(app([@x509cmd, "-CAcreateserial", "-in", $Ureq, "-days", "30",
"-req", "-out", $Ucert,
"-CA", $CAcert, "-CAkey", $CAkey, "-CAserial", $CAserial,
"-extfile", $Uconf, "-extensions", "v3_ee"],
stdout => "err.ss"))
&& run(app([@verifycmd, "-CAfile", $CAcert, $Ucert])),
'sign user cert request');
skip 'failure', 8 unless
ok(run(app([@x509cmd,
"-subject", "-issuer", "-startdate", "-enddate",
"-noout", "-in", $Ucert])),
'Certificate details');
skip 'failure', 7 unless
subtest 'DSA certificate creation' => sub {
plan skip_all => "skipping DSA certificate creation"
if $no_dsa;
plan tests => 4;
SKIP: {
$ENV{CN2} = "DSA Certificate";
skip 'failure', 3 unless
ok(run(app([@reqcmd, "-config", $Uconf,
"-out", $Dreq, "-keyout", $Dkey,
@req_dsa],
stdout => "err.ss")),
"make a DSA user cert request");
skip 'failure', 2 unless
ok(run(app([@x509cmd, "-CAcreateserial",
"-in", $Dreq,
"-days", "30",
"-req",
"-out", $Dcert,
"-CA", $CAcert, "-CAkey", $CAkey,
"-CAserial", $CAserial,
"-extfile", $Uconf,
"-extensions", "v3_ee_dsa"],
stdout => "err.ss")),
"sign DSA user cert request");
skip 'failure', 1 unless
ok(run(app([@verifycmd, "-CAfile", $CAcert, $Dcert])),
"verify DSA user cert");
skip 'failure', 0 unless
ok(run(app([@x509cmd,
"-subject", "-issuer",
"-startdate", "-enddate", "-noout",
"-in", $Dcert])),
"DSA Certificate details");
}
};
skip 'failure', 6 unless
subtest 'ECDSA/ECDH certificate creation' => sub {
plan skip_all => "skipping ECDSA/ECDH certificate creation"
if $no_ec;
plan tests => 5;
SKIP: {
$ENV{CN2} = "ECDSA Certificate";
skip 'failure', 4 unless
ok(run(app(["openssl", "ecparam", "-name", "P-256",
"-out", "ecp.ss"])),
"make EC parameters");
skip 'failure', 3 unless
ok(run(app([@reqcmd, "-config", $Uconf,
"-out", $Ereq, "-keyout", $Ekey,
"-newkey", "ec:ecp.ss"],
stdout => "err.ss")),
"make a ECDSA/ECDH user cert request");
skip 'failure', 2 unless
ok(run(app([@x509cmd, "-CAcreateserial",
"-in", $Ereq,
"-days", "30",
"-req",
"-out", $Ecert,
"-CA", $CAcert, "-CAkey", $CAkey,
"-CAserial", $CAserial,
"-extfile", $Uconf,
"-extensions", "v3_ee_ec"],
stdout => "err.ss")),
"sign ECDSA/ECDH user cert request");
skip 'failure', 1 unless
ok(run(app([@verifycmd, "-CAfile", $CAcert, $Ecert])),
"verify ECDSA/ECDH user cert");
skip 'failure', 0 unless
ok(run(app([@x509cmd,
"-subject", "-issuer",
"-startdate", "-enddate", "-noout",
"-in", $Ecert])),
"ECDSA Certificate details");
}
};
skip 'failure', 5 unless
ok(run(app([@reqcmd, "-config", $P1conf,
"-out", $P1req, "-keyout", $P1key, @req_new],
stdout => "err.ss")),
'make a proxy cert request');
skip 'failure', 4 unless
ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P1req, "-days", "30",
"-req", "-out", $P1cert,
"-CA", $Ucert, "-CAkey", $Ukey,
"-extfile", $P1conf, "-extensions", "v3_proxy"],
stdout => "err.ss")),
'sign proxy with user cert');
copy($Ucert, $P1intermediate);
run(app([@verifycmd, "-CAfile", $CAcert,
"-untrusted", $P1intermediate, $P1cert]));
ok(run(app([@x509cmd,
"-subject", "-issuer", "-startdate", "-enddate",
"-noout", "-in", $P1cert])),
'Certificate details');
skip 'failure', 2 unless
ok(run(app([@reqcmd, "-config", $P2conf,
"-out", $P2req, "-keyout", $P2key,
@req_new],
stdout => "err.ss")),
'make another proxy cert request');
skip 'failure', 1 unless
ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P2req, "-days", "30",
"-req", "-out", $P2cert,
"-CA", $P1cert, "-CAkey", $P1key,
"-extfile", $P2conf, "-extensions", "v3_proxy"],
stdout => "err.ss")),
'sign second proxy cert request with the first proxy cert');
open OUT, ">", $P2intermediate;
copy($Ucert, \*OUT); copy($P1cert, \*OUT);
close OUT;
run(app([@verifycmd, "-CAfile", $CAcert,
"-untrusted", $P2intermediate, $P2cert]));
ok(run(app([@x509cmd,
"-subject", "-issuer", "-startdate", "-enddate",
"-noout", "-in", $P2cert])),
'Certificate details');
}
}
sub testssl {
my $key = shift || top_file("apps","server.pem");
my $cert = shift || top_file("apps","server.pem");
my $CAtmp = shift;
my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", top_dir("certs"));
my @extra = @_;
my @ssltest = ("ssltest",
"-s_key", $key, "-s_cert", $cert,
"-c_key", $key, "-c_cert", $cert);
my $serverinfo = top_file("test","serverinfo.pem");
my $dsa_cert = 0;
if (grep /DSA Public Key/, run(app(["openssl", "x509", "-in", $cert,
"-text", "-noout"]), capture => 1)) {
$dsa_cert = 1;
}
# plan tests => 10;
subtest 'standard SSL tests' => sub {
######################################################################
plan tests => 29;
SKIP: {
skip "SSLv3 is not supported by this OpenSSL build", 4
if disabled("ssl3");
ok(run(test([@ssltest, "-ssl3", @extra])),
'test sslv3');
ok(run(test([@ssltest, "-ssl3", "-server_auth", @CA, @extra])),
'test sslv3 with server authentication');
ok(run(test([@ssltest, "-ssl3", "-client_auth", @CA, @extra])),
'test sslv3 with client authentication');
ok(run(test([@ssltest, "-ssl3", "-server_auth", "-client_auth", @CA, @extra])),
'test sslv3 with both server and client authentication');
}
SKIP: {
skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 4
if $no_anytls;
ok(run(test([@ssltest, @extra])),
'test sslv2/sslv3');
ok(run(test([@ssltest, "-server_auth", @CA, @extra])),
'test sslv2/sslv3 with server authentication');
ok(run(test([@ssltest, "-client_auth", @CA, @extra])),
'test sslv2/sslv3 with client authentication');
ok(run(test([@ssltest, "-server_auth", "-client_auth", @CA, @extra])),
'test sslv2/sslv3 with both server and client authentication');
}
SKIP: {
skip "SSLv3 is not supported by this OpenSSL build", 4
if disabled("ssl3");
ok(run(test([@ssltest, "-bio_pair", "-ssl3", @extra])),
'test sslv3 via BIO pair');
ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA, @extra])),
'test sslv3 with server authentication via BIO pair');
ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA, @extra])),
'test sslv3 with client authentication via BIO pair');
ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA, @extra])),
'test sslv3 with both server and client authentication via BIO pair');
}
SKIP: {
skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 1
if $no_anytls;
ok(run(test([@ssltest, "-bio_pair", @extra])),
'test sslv2/sslv3 via BIO pair');
}
SKIP: {
skip "DTLSv1 is not supported by this OpenSSL build", 4
if disabled("dtls1");
ok(run(test([@ssltest, "-dtls1", @extra])),
'test dtlsv1');
ok(run(test([@ssltest, "-dtls1", "-server_auth", @CA, @extra])),
'test dtlsv1 with server authentication');
ok(run(test([@ssltest, "-dtls1", "-client_auth", @CA, @extra])),
'test dtlsv1 with client authentication');
ok(run(test([@ssltest, "-dtls1", "-server_auth", "-client_auth", @CA, @extra])),
'test dtlsv1 with both server and client authentication');
}
SKIP: {
skip "DTLSv1.2 is not supported by this OpenSSL build", 4
if disabled("dtls1_2");
ok(run(test([@ssltest, "-dtls12", @extra])),
'test dtlsv1.2');
ok(run(test([@ssltest, "-dtls12", "-server_auth", @CA, @extra])),
'test dtlsv1.2 with server authentication');
ok(run(test([@ssltest, "-dtls12", "-client_auth", @CA, @extra])),
'test dtlsv1.2 with client authentication');
ok(run(test([@ssltest, "-dtls12", "-server_auth", "-client_auth", @CA, @extra])),
'test dtlsv1.2 with both server and client authentication');
}
SKIP: {
skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 8
if $no_anytls;
SKIP: {
skip "skipping test of sslv2/sslv3 w/o (EC)DHE test", 1 if $dsa_cert;
ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe", @extra])),
'test sslv2/sslv3 w/o (EC)DHE via BIO pair');
}
ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v", @extra])),
'test sslv2/sslv3 with 1024bit DHE via BIO pair');
ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA, @extra])),
'test sslv2/sslv3 with server authentication');
ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA, @extra])),
'test sslv2/sslv3 with client authentication via BIO pair');
ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA, @extra])),
'test sslv2/sslv3 with both client and server authentication via BIO pair');
ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA, @extra])),
'test sslv2/sslv3 with both client and server authentication via BIO pair and app verify');
ok(run(test([@ssltest, "-ipv4", @extra])),
'test TLS via IPv4');
ok(run(test([@ssltest, "-ipv6", @extra])),
'test TLS via IPv6');
}
};
subtest "Testing ciphersuites" => sub {
my @exkeys = ();
my $ciphers = "-EXP:-PSK:-SRP:-kDH:-kECDHe";
if ($no_dh) {
note "skipping DHE tests\n";
$ciphers .= ":-kDHE";
}
if ($no_dsa) {
note "skipping DSA tests\n";
$ciphers .= ":-aDSA";
} else {
push @exkeys, "-s_cert", "certD.ss", "-s_key", "keyD.ss";
}
if ($no_ec) {
note "skipping EC tests\n";
$ciphers .= ":!aECDSA:!kECDH";
} else {
push @exkeys, "-s_cert", "certE.ss", "-s_key", "keyE.ss";
}
my @protocols = ();
# FIXME: I feel unsure about the following line, is that really just TLSv1.2, or is it all of the SSLv3/TLS protocols?
push(@protocols, "TLSv1.2") unless $no_tls1_2;
push(@protocols, "SSLv3") unless $no_ssl3;
my $protocolciphersuitcount = 0;
my %ciphersuites =
map { my @c =
map { split(/:/, $_) }
run(app(["openssl", "ciphers", "${_}:$ciphers"]),
capture => 1);
map { s/\R//; } @c; # chomp @c;
$protocolciphersuitcount += scalar @c;
$_ => [ @c ] } @protocols;
plan skip_all => "None of the ciphersuites to test are available in this OpenSSL build"
if $protocolciphersuitcount + scalar(@protocols) == 0;
# The count of protocols is because in addition to the ciphersuits
# we got above, we're running a weak DH test for each protocol
plan tests => $protocolciphersuitcount + scalar(@protocols);
foreach my $protocol (@protocols) {
note "Testing ciphersuites for $protocol";
foreach my $cipher (@{$ciphersuites{$protocol}}) {
ok(run(test([@ssltest, @exkeys, "-cipher", $cipher,
$protocol eq "SSLv3" ? ("-ssl3") : ()])),
"Testing $cipher");
}
is(run(test([@ssltest,
"-s_cipher", "EDH",
"-c_cipher", 'EDH:@SECLEVEL=1',
"-dhe512",
$protocol eq "SSLv3" ? ("-ssl3") : ()])), 0,
"testing connection with weak DH, expecting failure");
}
};
subtest 'RSA/(EC)DHE/PSK tests' => sub {
######################################################################
plan tests => 5;
SKIP: {
skip "TLSv1.0 is not supported by this OpenSSL build", 5
if $no_tls1;
SKIP: {
skip "skipping anonymous DH tests", 1
if ($no_dh);
ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time", @extra])),
'test tlsv1 with 1024bit anonymous DH, multiple handshakes');
}
SKIP: {
skip "skipping RSA tests", 2
if $no_rsa;
ok(run(test(["ssltest", "-v", "-bio_pair", "-tls1", "-s_cert", top_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time", @extra])),
'test tlsv1 with 1024bit RSA, no (EC)DHE, multiple handshakes');
skip "skipping RSA+DHE tests", 1
if $no_dh;
ok(run(test(["ssltest", "-v", "-bio_pair", "-tls1", "-s_cert", top_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time", @extra])),
'test tlsv1 with 1024bit RSA, 1024bit DHE, multiple handshakes');
}
SKIP: {
skip "skipping PSK tests", 2
if ($no_psk);
ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123", @extra])),
'test tls1 with PSK');
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123", @extra])),
'test tls1 with PSK via BIO pair');
}
}
};
subtest 'Next Protocol Negotiation Tests' => sub {
######################################################################
plan tests => 7;
SKIP: {
skip "TLSv1.0 is not supported by this OpenSSL build", 7
if $no_tls1;
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_server"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_server_reject"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server_reject"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server", "-num", "2"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server", "-num", "2", "-reuse"])));
}
};
subtest 'Custom Extension tests' => sub {
######################################################################
plan tests => 1;
SKIP: {
skip "TLSv1.0 is not supported by this OpenSSL build", 1
if $no_tls1;
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext"])),
'test tls1 with custom extensions');
}
};
subtest 'Serverinfo tests' => sub {
######################################################################
plan tests => 5;
SKIP: {
skip "TLSv1.0 is not supported by this OpenSSL build", 5
if $no_tls1;
note('echo test tls1 with serverinfo');
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_tack"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
}
};
subtest 'ALPN tests' => sub {
######################################################################
plan tests => 12;
SKIP: {
skip "TLSv1.0 is not supported by this OpenSSL build", 12
if $no_tls1;
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo", "-alpn_server", "bar"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo", "-alpn_server", "foo", "-alpn_expected", "foo"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo,bar", "-alpn_server", "foo", "-alpn_expected", "foo"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "foo", "-alpn_expected", "foo"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "foo,bar", "-alpn_expected", "foo"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "bar,foo", "-alpn_expected", "bar"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo,bar", "-alpn_server", "bar,foo", "-alpn_expected", "bar"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "baz", "-alpn_server", "bar,foo"])));
SKIP: {
skip "skipping SRP tests", 4
if $no_srp;
ok(run(test([@ssltest, "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
'test tls1 with SRP');
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
'test tls1 with SRP via BIO pair');
ok(run(test([@ssltest, "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])),
'test tls1 with SRP auth');
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])),
'test tls1 with SRP auth via BIO pair');
}
}
};
subtest 'Multi-buffer tests' => sub {
######################################################################
plan tests => 2;
SKIP: {
skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 2
if $no_anytls;
skip "skipping multi-buffer tests", 2
if @extra || (POSIX::uname())[4] ne "x86_64";
ok(run(test([@ssltest, "-cipher", "AES128-SHA", "-bytes", "8m"])));
# We happen to know that AES128-SHA256 is TLSv1.2 only... for now.
skip "TLSv1.2 is not supported by this OpenSSL configuration", 1
if $no_tls1_2;
ok(run(test([@ssltest, "-cipher", "AES128-SHA256", "-bytes", "8m"])));
}
};
subtest 'TLS Version min/max tests' => sub {
my @protos;
push(@protos, "ssl3") unless $no_ssl3;
push(@protos, "tls1") unless $no_tls1;
push(@protos, "tls1.1") unless $no_tls1_1;
push(@protos, "tls1.2") unless $no_tls1_2;
my @minprotos = (undef, @protos);
my @maxprotos = (@protos, undef);
my @shdprotos = (@protos, $protos[$#protos]);
my $n = ((@protos+2) * (@protos+3))/2 - 2;
my $ntests = $n * $n;
plan tests => $ntests;
SKIP: {
skip "TLS disabled", 1 if $ntests == 1;
my $should;
for (my $smin = 0; $smin < @minprotos; ++$smin) {
for (my $smax = $smin ? $smin - 1 : 0; $smax < @maxprotos; ++$smax) {
for (my $cmin = 0; $cmin < @minprotos; ++$cmin) {
for (my $cmax = $cmin ? $cmin - 1 : 0; $cmax < @maxprotos; ++$cmax) {
if ($cmax < $smin-1) {
$should = "fail-server";
} elsif ($smax < $cmin-1) {
$should = "fail-client";
} elsif ($cmax > $smax) {
$should = $shdprotos[$smax];
} else {
$should = $shdprotos[$cmax];
}
my @args = @ssltest;
push(@args, "-should_negotiate", $should);
push(@args, "-server_min_proto", $minprotos[$smin])
if (defined($minprotos[$smin]));
push(@args, "-server_max_proto", $maxprotos[$smax])
if (defined($maxprotos[$smax]));
push(@args, "-client_min_proto", $minprotos[$cmin])
if (defined($minprotos[$cmin]));
push(@args, "-client_max_proto", $maxprotos[$cmax])
if (defined($maxprotos[$cmax]));
my $ok = run(test[@args]);
if (! $ok) {
print STDERR "\nsmin=$smin, smax=$smax, cmin=$cmin, cmax=$cmax\n";
print STDERR "\nFailed: @args\n";
}
ok($ok);
}}}}}
};
subtest 'DTLS Version min/max tests' => sub {
my @protos;
push(@protos, "dtls1") unless ($no_dtls1 || $no_dtls);
push(@protos, "dtls1.2") unless ($no_dtls1_2 || $no_dtls);
my @minprotos = (undef, @protos);
my @maxprotos = (@protos, undef);
my @shdprotos = (@protos, $protos[$#protos]);
my $n = ((@protos+2) * (@protos+3))/2 - 2;
my $ntests = $n * $n;
plan tests => $ntests;
SKIP: {
skip "DTLS disabled", 1 if $ntests == 1;
my $should;
for (my $smin = 0; $smin < @minprotos; ++$smin) {
for (my $smax = $smin ? $smin - 1 : 0; $smax < @maxprotos; ++$smax) {
for (my $cmin = 0; $cmin < @minprotos; ++$cmin) {
for (my $cmax = $cmin ? $cmin - 1 : 0; $cmax < @maxprotos; ++$cmax) {
if ($cmax < $smin-1) {
$should = "fail-server";
} elsif ($smax < $cmin-1) {
$should = "fail-client";
} elsif ($cmax > $smax) {
$should = $shdprotos[$smax];
} else {
$should = $shdprotos[$cmax];
}
my @args = (@ssltest, "-dtls");
push(@args, "-should_negotiate", $should);
push(@args, "-server_min_proto", $minprotos[$smin])
if (defined($minprotos[$smin]));
push(@args, "-server_max_proto", $maxprotos[$smax])
if (defined($maxprotos[$smax]));
push(@args, "-client_min_proto", $minprotos[$cmin])
if (defined($minprotos[$cmin]));
push(@args, "-client_max_proto", $maxprotos[$cmax])
if (defined($maxprotos[$cmax]));
my $ok = run(test[@args]);
if (! $ok) {
print STDERR "\nsmin=$smin, smax=$smax, cmin=$cmin, cmax=$cmax\n";
print STDERR "\nFailed: @args\n";
}
ok($ok);
}}}}}
};
}
sub testsslproxy {
my $key = shift || top_file("apps","server.pem");
my $cert = shift || top_file("apps","server.pem");
my $CAtmp = shift;
my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", top_dir("certs"));
my @extra = @_;
my @ssltest = ("ssltest",
"-s_key", $key, "-s_cert", $cert,
"-c_key", $key, "-c_cert", $cert);
# plan tests => 16;
note('Testing a lot of proxy conditions.');
# We happen to know that certP1.ss has policy letters "AB" and
# certP2.ss has policy letters "BC". However, because certP2.ss
# has certP1.ss as issuer, when it's used, both their policy
# letters get combined into just "B".
# The policy letter(s) then get filtered with the given auth letter
# in the table below, and the result gets tested with the given
# condition. For details, read ssltest.c
#
# certfilename => [ [ auth, cond, expected result ] ... ]
my %expected = ( "certP1.ss" => [ [ [ 'A', 'A' ], 1 ],
[ [ 'A', 'B' ], 0 ],
[ [ 'A', 'C' ], 0 ],
[ [ 'A', 'A|B&!C' ], 1 ],
[ [ 'B', 'A' ], 0 ],
[ [ 'B', 'B' ], 1 ],
[ [ 'B', 'C' ], 0 ],
[ [ 'B', 'A|B&!C' ], 1 ],
[ [ 'C', 'A' ], 0 ],
[ [ 'C', 'B' ], 0 ],
[ [ 'C', 'C' ], 0 ],
[ [ 'C', 'A|B&!C' ], 0 ],
[ [ 'BC', 'A' ], 0 ],
[ [ 'BC', 'B' ], 1 ],
[ [ 'BC', 'C' ], 0 ],
[ [ 'BC', 'A|B&!C' ], 1 ] ],
"certP2.ss" => [ [ [ 'A', 'A' ], 0 ],
[ [ 'A', 'B' ], 0 ],
[ [ 'A', 'C' ], 0 ],
[ [ 'A', 'A|B&!C' ], 0 ],
[ [ 'B', 'A' ], 0 ],
[ [ 'B', 'B' ], 1 ],
[ [ 'B', 'C' ], 0 ],
[ [ 'B', 'A|B&!C' ], 1 ],
[ [ 'C', 'A' ], 0 ],
[ [ 'C', 'B' ], 0 ],
[ [ 'C', 'C' ], 0 ],
[ [ 'C', 'A|B&!C' ], 0 ],
[ [ 'BC', 'A' ], 0 ],
[ [ 'BC', 'B' ], 1 ],
[ [ 'BC', 'C' ], 0 ],
[ [ 'BC', 'A|B&!C' ], 1 ] ] );
SKIP: {
skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", scalar(@{$expected{$cert}})
if $no_anytls;
foreach (@{$expected{$cert}}) {
my $auth = $_->[0]->[0];
my $cond = $_->[0]->[1];
my $res = $_->[1];
is(run(test([@ssltest, "-server_auth", @CA,
"-proxy", "-proxy_auth", $auth,
"-proxy_cond", $cond])), $res,
"test tlsv1, server auth, proxy auth $auth and cond $cond (expect "
.($res ? "success" : "failure").")");
}
}
}
Reference in a new issue View git blame Copy permalink