wbrawner/openssl
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
openssl/crypto/sha/asm/sha1-586.pl

430 lines
12 KiB
Raku
Raw Blame History

#!/usr/local/bin/perl
# It was noted that Intel IA-32 C compiler generates code which
# performs ~30% *faster* on P4 CPU than original *hand-coded*
# SHA1 assembler implementation. To address this problem (and
# prove that humans are still better than machines:-), the
# original code was overhauled, which resulted in following
# performance changes:
#
# compared with original compared with Intel cc
# assembler impl. generated code
# Pentium -16% +48%
# PIII/AMD +8% +16%
# P4 +85%(!) +45%
#
# As you can see Pentium came out as looser:-( Yet I reckoned that
# improvement on P4 outweights the loss and incorporate this
# re-tuned code to 0.9.7 and later.
# ----------------------------------------------------------------
# Those who for any particular reason absolutely must score on
# Pentium can replace this module with one from 0.9.6 distribution.
# This "offer" shall be revoked the moment programming interface to
# this module is changed, in which case this paragraph should be
# removed.
# ----------------------------------------------------------------
# <appro@fy.chalmers.se>
$normal=0;
push(@INC,"perlasm","../../perlasm");
require "x86asm.pl";
&asm_init($ARGV[0],"sha1-586.pl",$ARGV[$#ARGV] eq "386");
$A="eax";
$B="ecx";
$C="ebx";
$D="edx";
$E="edi";
$T="esi";
$tmp1="ebp";
$off=9*4;
@K=(0x5a827999,0x6ed9eba1,0x8f1bbcdc,0xca62c1d6);
&sha1_block_data("sha1_block_asm_data_order");
&asm_finish();
sub Nn
{
local($p)=@_;
local(%n)=($A,$T,$B,$A,$C,$B,$D,$C,$E,$D,$T,$E);
return($n{$p});
}
sub Np
{
local($p)=@_;
local(%n)=($A,$T,$B,$A,$C,$B,$D,$C,$E,$D,$T,$E);
local(%n)=($A,$B,$B,$C,$C,$D,$D,$E,$E,$T,$T,$A);
return($n{$p});
}
sub Na
{
local($n)=@_;
return( (($n )&0x0f),
(($n+ 2)&0x0f),
(($n+ 8)&0x0f),
(($n+13)&0x0f),
(($n+ 1)&0x0f));
}
sub X_expand
{
local($in)=@_;
&comment("First, load the words onto the stack in network byte order");
for ($i=0; $i<16; $i+=2)
{
&mov($A,&DWP(($i+0)*4,$in,"",0));# unless $i == 0;
&mov($B,&DWP(($i+1)*4,$in,"",0));
&bswap($A);
&bswap($B);
&mov(&swtmp($i+0),$A);
&mov(&swtmp($i+1),$B);
}
&comment("We now have the X array on the stack");
&comment("starting at sp-4");
}
# Rules of engagement
# F is always trashable at the start, the running total.
# E becomes the next F so it can be trashed after it has been 'accumulated'
# F becomes A in the next round. We don't need to access it much.
# During the X update part, the result ends up in $X[$n0].
sub BODY_00_15
{
local($pos,$K,$X,$n,$a,$b,$c,$d,$e,$f)=@_;
&comment("00_15 $n");
&mov($f,$c); # f to hold F_00_19(b,c,d)
if ($n==0) { &mov($tmp1,$a); }
else { &mov($a,$tmp1); }
&rotl($tmp1,5); # tmp1=ROTATE(a,5)
&xor($f,$d);
&and($f,$b);
&add($tmp1,$e); # tmp1+=e;
&mov($e,&swtmp($n)); # e becomes volatile and
# is loaded with xi
&xor($f,$d); # f holds F_00_19(b,c,d)
&rotr($b,2); # b=ROTATE(b,30)
&lea($tmp1,&DWP($K,$tmp1,$e,1));# tmp1+=K_00_19+xi
if ($n==15) { &add($f,$tmp1); } # f+=tmp1
else { &add($tmp1,$f); }
}
sub BODY_16_19
{
local($pos,$K,$X,$n,$a,$b,$c,$d,$e,$f)=@_;
local($n0,$n1,$n2,$n3,$np)=&Na($n);
&comment("16_19 $n");
&mov($f,&swtmp($n1)); # f to hold Xupdate(xi,xa,xb,xc,xd)
&mov($tmp1,$c); # tmp1 to hold F_00_19(b,c,d)
&xor($f,&swtmp($n0));
&xor($tmp1,$d);
&xor($f,&swtmp($n2));
&and($tmp1,$b); # tmp1 holds F_00_19(b,c,d)
&rotr($b,2); # b=ROTATE(b,30)
&xor($f,&swtmp($n3)); # f holds xa^xb^xc^xd
&rotl($f,1); # f=ROATE(f,1)
&xor($tmp1,$d); # tmp1=F_00_19(b,c,d)
&mov(&swtmp($n0),$f); # xi=f
&lea($f,&DWP($K,$f,$e,1)); # f+=K_00_19+e
&mov($e,$a); # e becomes volatile
&rotl($e,5); # e=ROTATE(a,5)
&add($f,$tmp1); # f+=F_00_19(b,c,d)
&add($f,$e); # f+=ROTATE(a,5)
}
sub BODY_20_39
{
local($pos,$K,$X,$n,$a,$b,$c,$d,$e,$f)=@_;
&comment("20_39 $n");
local($n0,$n1,$n2,$n3,$np)=&Na($n);
&mov($tmp1,$b); # tmp1 to hold F_20_39(b,c,d)
&mov($f,&swtmp($n0)); # f to hold Xupdate(xi,xa,xb,xc,xd)
&rotr($b,2); # b=ROTATE(b,30)
&xor($f,&swtmp($n1));
&xor($tmp1,$c);
&xor($f,&swtmp($n2));
&xor($tmp1,$d); # tmp1 holds F_20_39(b,c,d)
&xor($f,&swtmp($n3)); # f holds xa^xb^xc^xd
&rotl($f,1); # f=ROTATE(f,1)
&add($tmp1,$e);
&mov(&swtmp($n0),$f); # xi=f
&mov($e,$a); # e becomes volatile
&rotl($e,5); # e=ROTATE(a,5)
&lea($f,&DWP($K,$f,$tmp1,1)); # f+=K_20_39+e
&add($f,$e); # f+=ROTATE(a,5)
}
sub BODY_40_59
{
local($pos,$K,$X,$n,$a,$b,$c,$d,$e,$f)=@_;
&comment("40_59 $n");
local($n0,$n1,$n2,$n3,$np)=&Na($n);
&mov($f,&swtmp($n0)); # f to hold Xupdate(xi,xa,xb,xc,xd)
&mov($tmp1,&swtmp($n1));
&xor($f,$tmp1);
&mov($tmp1,&swtmp($n2));
&xor($f,$tmp1);
&mov($tmp1,&swtmp($n3));
&xor($f,$tmp1); # f holds xa^xb^xc^xd
&mov($tmp1,$b); # tmp1 to hold F_40_59(b,c,d)
&rotl($f,1); # f=ROTATE(f,1)
&or($tmp1,$c);
&mov(&swtmp($n0),$f); # xi=f
&and($tmp1,$d);
&lea($f,&DWP($K,$f,$e,1)); # f+=K_40_59+e
&mov($e,$b); # e becomes volatile and is used
# to calculate F_40_59(b,c,d)
&rotr($b,2); # b=ROTATE(b,30)
&and($e,$c);
&or($tmp1,$e); # tmp1 holds F_40_59(b,c,d)
&mov($e,$a);
&rotl($e,5); # e=ROTATE(a,5)
&add($f,$tmp1); # f+=tmp1;
&add($f,$e); # f+=ROTATE(a,5)
}
sub BODY_60_79
{
&BODY_20_39(@_);
}
sub sha1_block_host
{
local($name, $sclabel)=@_;
&function_begin_B($name,"");
# parameter 1 is the MD5_CTX structure.
# A 0
# B 4
# C 8
# D 12
# E 16
&mov("ecx", &wparam(2));
&push("esi");
&shl("ecx",6);
&mov("esi", &wparam(1));
&push("ebp");
&add("ecx","esi"); # offset to leave on
&push("ebx");
&mov("ebp", &wparam(0));
&push("edi");
&mov($D, &DWP(12,"ebp","",0));
&stack_push(18+9);
&mov($E, &DWP(16,"ebp","",0));
&mov($C, &DWP( 8,"ebp","",0));
&mov(&swtmp(17),"ecx");
&comment("First we need to setup the X array");
for ($i=0; $i<16; $i+=2)
{
&mov($A,&DWP(($i+0)*4,"esi","",0));# unless $i == 0;
&mov($B,&DWP(($i+1)*4,"esi","",0));
&mov(&swtmp($i+0),$A);
&mov(&swtmp($i+1),$B);
}
&jmp($sclabel);
&function_end_B($name);
}
sub sha1_block_data
{
local($name)=@_;
&function_begin_B($name,"");
# parameter 1 is the MD5_CTX structure.
# A 0
# B 4
# C 8
# D 12
# E 16
&mov("ecx", &wparam(2));
&push("esi");
&shl("ecx",6);
&mov("esi", &wparam(1));
&push("ebp");
&add("ecx","esi"); # offset to leave on
&push("ebx");
&mov("ebp", &wparam(0));
&push("edi");
&mov($D, &DWP(12,"ebp","",0));
&stack_push(18+9);
&mov($E, &DWP(16,"ebp","",0));
&mov($C, &DWP( 8,"ebp","",0));
&mov(&swtmp(17),"ecx");
&comment("First we need to setup the X array");
&set_label("start") unless $normal;
&X_expand("esi");
&mov(&wparam(1),"esi");
&set_label("shortcut", 0, 1);
&comment("");
&comment("Start processing");
# odd start
&mov($A, &DWP( 0,"ebp","",0));
&mov($B, &DWP( 4,"ebp","",0));
$X="esp";
&BODY_00_15(-2,$K[0],$X, 0,$A,$B,$C,$D,$E,$T);
&BODY_00_15( 0,$K[0],$X, 1,$T,$A,$B,$C,$D,$E);
&BODY_00_15( 0,$K[0],$X, 2,$E,$T,$A,$B,$C,$D);
&BODY_00_15( 0,$K[0],$X, 3,$D,$E,$T,$A,$B,$C);
&BODY_00_15( 0,$K[0],$X, 4,$C,$D,$E,$T,$A,$B);
&BODY_00_15( 0,$K[0],$X, 5,$B,$C,$D,$E,$T,$A);
&BODY_00_15( 0,$K[0],$X, 6,$A,$B,$C,$D,$E,$T);
&BODY_00_15( 0,$K[0],$X, 7,$T,$A,$B,$C,$D,$E);
&BODY_00_15( 0,$K[0],$X, 8,$E,$T,$A,$B,$C,$D);
&BODY_00_15( 0,$K[0],$X, 9,$D,$E,$T,$A,$B,$C);
&BODY_00_15( 0,$K[0],$X,10,$C,$D,$E,$T,$A,$B);
&BODY_00_15( 0,$K[0],$X,11,$B,$C,$D,$E,$T,$A);
&BODY_00_15( 0,$K[0],$X,12,$A,$B,$C,$D,$E,$T);
&BODY_00_15( 0,$K[0],$X,13,$T,$A,$B,$C,$D,$E);
&BODY_00_15( 0,$K[0],$X,14,$E,$T,$A,$B,$C,$D);
&BODY_00_15( 1,$K[0],$X,15,$D,$E,$T,$A,$B,$C);
&BODY_16_19(-1,$K[0],$X,16,$C,$D,$E,$T,$A,$B);
&BODY_16_19( 0,$K[0],$X,17,$B,$C,$D,$E,$T,$A);
&BODY_16_19( 0,$K[0],$X,18,$A,$B,$C,$D,$E,$T);
&BODY_16_19( 1,$K[0],$X,19,$T,$A,$B,$C,$D,$E);
&BODY_20_39(-1,$K[1],$X,20,$E,$T,$A,$B,$C,$D);
&BODY_20_39( 0,$K[1],$X,21,$D,$E,$T,$A,$B,$C);
&BODY_20_39( 0,$K[1],$X,22,$C,$D,$E,$T,$A,$B);
&BODY_20_39( 0,$K[1],$X,23,$B,$C,$D,$E,$T,$A);
&BODY_20_39( 0,$K[1],$X,24,$A,$B,$C,$D,$E,$T);
&BODY_20_39( 0,$K[1],$X,25,$T,$A,$B,$C,$D,$E);
&BODY_20_39( 0,$K[1],$X,26,$E,$T,$A,$B,$C,$D);
&BODY_20_39( 0,$K[1],$X,27,$D,$E,$T,$A,$B,$C);
&BODY_20_39( 0,$K[1],$X,28,$C,$D,$E,$T,$A,$B);
&BODY_20_39( 0,$K[1],$X,29,$B,$C,$D,$E,$T,$A);
&BODY_20_39( 0,$K[1],$X,30,$A,$B,$C,$D,$E,$T);
&BODY_20_39( 0,$K[1],$X,31,$T,$A,$B,$C,$D,$E);
&BODY_20_39( 0,$K[1],$X,32,$E,$T,$A,$B,$C,$D);
&BODY_20_39( 0,$K[1],$X,33,$D,$E,$T,$A,$B,$C);
&BODY_20_39( 0,$K[1],$X,34,$C,$D,$E,$T,$A,$B);
&BODY_20_39( 0,$K[1],$X,35,$B,$C,$D,$E,$T,$A);
&BODY_20_39( 0,$K[1],$X,36,$A,$B,$C,$D,$E,$T);
&BODY_20_39( 0,$K[1],$X,37,$T,$A,$B,$C,$D,$E);
&BODY_20_39( 0,$K[1],$X,38,$E,$T,$A,$B,$C,$D);
&BODY_20_39( 1,$K[1],$X,39,$D,$E,$T,$A,$B,$C);
&BODY_40_59(-1,$K[2],$X,40,$C,$D,$E,$T,$A,$B);
&BODY_40_59( 0,$K[2],$X,41,$B,$C,$D,$E,$T,$A);
&BODY_40_59( 0,$K[2],$X,42,$A,$B,$C,$D,$E,$T);
&BODY_40_59( 0,$K[2],$X,43,$T,$A,$B,$C,$D,$E);
&BODY_40_59( 0,$K[2],$X,44,$E,$T,$A,$B,$C,$D);
&BODY_40_59( 0,$K[2],$X,45,$D,$E,$T,$A,$B,$C);
&BODY_40_59( 0,$K[2],$X,46,$C,$D,$E,$T,$A,$B);
&BODY_40_59( 0,$K[2],$X,47,$B,$C,$D,$E,$T,$A);
&BODY_40_59( 0,$K[2],$X,48,$A,$B,$C,$D,$E,$T);
&BODY_40_59( 0,$K[2],$X,49,$T,$A,$B,$C,$D,$E);
&BODY_40_59( 0,$K[2],$X,50,$E,$T,$A,$B,$C,$D);
&BODY_40_59( 0,$K[2],$X,51,$D,$E,$T,$A,$B,$C);
&BODY_40_59( 0,$K[2],$X,52,$C,$D,$E,$T,$A,$B);
&BODY_40_59( 0,$K[2],$X,53,$B,$C,$D,$E,$T,$A);
&BODY_40_59( 0,$K[2],$X,54,$A,$B,$C,$D,$E,$T);
&BODY_40_59( 0,$K[2],$X,55,$T,$A,$B,$C,$D,$E);
&BODY_40_59( 0,$K[2],$X,56,$E,$T,$A,$B,$C,$D);
&BODY_40_59( 0,$K[2],$X,57,$D,$E,$T,$A,$B,$C);
&BODY_40_59( 0,$K[2],$X,58,$C,$D,$E,$T,$A,$B);
&BODY_40_59( 1,$K[2],$X,59,$B,$C,$D,$E,$T,$A);
&BODY_60_79(-1,$K[3],$X,60,$A,$B,$C,$D,$E,$T);
&BODY_60_79( 0,$K[3],$X,61,$T,$A,$B,$C,$D,$E);
&BODY_60_79( 0,$K[3],$X,62,$E,$T,$A,$B,$C,$D);
&BODY_60_79( 0,$K[3],$X,63,$D,$E,$T,$A,$B,$C);
&BODY_60_79( 0,$K[3],$X,64,$C,$D,$E,$T,$A,$B);
&BODY_60_79( 0,$K[3],$X,65,$B,$C,$D,$E,$T,$A);
&BODY_60_79( 0,$K[3],$X,66,$A,$B,$C,$D,$E,$T);
&BODY_60_79( 0,$K[3],$X,67,$T,$A,$B,$C,$D,$E);
&BODY_60_79( 0,$K[3],$X,68,$E,$T,$A,$B,$C,$D);
&BODY_60_79( 0,$K[3],$X,69,$D,$E,$T,$A,$B,$C);
&BODY_60_79( 0,$K[3],$X,70,$C,$D,$E,$T,$A,$B);
&BODY_60_79( 0,$K[3],$X,71,$B,$C,$D,$E,$T,$A);
&BODY_60_79( 0,$K[3],$X,72,$A,$B,$C,$D,$E,$T);
&BODY_60_79( 0,$K[3],$X,73,$T,$A,$B,$C,$D,$E);
&BODY_60_79( 0,$K[3],$X,74,$E,$T,$A,$B,$C,$D);
&BODY_60_79( 0,$K[3],$X,75,$D,$E,$T,$A,$B,$C);
&BODY_60_79( 0,$K[3],$X,76,$C,$D,$E,$T,$A,$B);
&BODY_60_79( 0,$K[3],$X,77,$B,$C,$D,$E,$T,$A);
&BODY_60_79( 0,$K[3],$X,78,$A,$B,$C,$D,$E,$T);
&BODY_60_79( 2,$K[3],$X,79,$T,$A,$B,$C,$D,$E);
&comment("End processing");
&comment("");
# D is the tmp value
# E -> A
# T -> B
# A -> C
# B -> D
# C -> E
# D -> T
&mov($tmp1,&wparam(0));
&mov($D, &DWP(12,$tmp1,"",0));
&add($D,$B);
&mov($B, &DWP( 4,$tmp1,"",0));
&add($B,$T);
&mov($T, $A);
&mov($A, &DWP( 0,$tmp1,"",0));
&mov(&DWP(12,$tmp1,"",0),$D);
&add($A,$E);
&mov($E, &DWP(16,$tmp1,"",0));
&add($E,$C);
&mov($C, &DWP( 8,$tmp1,"",0));
&add($C,$T);
&mov(&DWP( 0,$tmp1,"",0),$A);
&mov("esi",&wparam(1));
&mov(&DWP( 8,$tmp1,"",0),$C);
&add("esi",64);
&mov("eax",&swtmp(17));
&mov(&DWP(16,$tmp1,"",0),$E);
&cmp("esi","eax");
&mov(&DWP( 4,$tmp1,"",0),$B);
&jl(&label("start"));
&stack_pop(18+9);
&pop("edi");
&pop("ebx");
&pop("ebp");
&pop("esi");
&ret();
# keep a note of shortcut label so it can be used outside
# block.
my $sclabel = &label("shortcut");
&function_end_B($name);
# Putting this here avoids problems with MASM in debugging mode
&sha1_block_host("sha1_block_asm_host_order", $sclabel);
}
Reference in a new issue View git blame Copy permalink