openssl/doc/crypto/OPENSSL_init_crypto.pod
Rich Salz e2f92610bc Add copyright to manpages
Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-05-19 08:51:59 -04:00

234 lines
9 KiB
Text

=pod
=head1 NAME
OPENSSL_init_crypto, OPENSSL_cleanup,
OPENSSL_atexit, OPENSSL_thread_stop - OpenSSL
initialisation and deinitialisation functions
=head1 SYNOPSIS
#include <openssl/crypto.h>
void OPENSSL_cleanup(void);
int OPENSSL_init_crypto(uint64_t opts, const OPENSSL_INIT_SETTINGS *settings);
int OPENSSL_atexit(void (*handler)(void));
void OPENSSL_thread_stop(void);
OPENSSL_INIT_SETTINGS *OPENSSL_init_new(void);
OPENSSL_INIT_set_config_filename(OPENSSL_INIT_SETTINGS *init, const char* name);
OPENSSL_INIT_free(OPENSSL_INIT_SETTINGS *init);
=head1 DESCRIPTION
During normal operation OpenSSL (libcrypto) will allocate various resources at
start up that must, subsequently, be freed on close down of the library.
Additionally some resources are allocated on a per thread basis (if the
application is multi-threaded), and these resources must be freed prior to the
thread closing.
As of version 1.1.0 OpenSSL will automatically allocate all resources that it
needs so no explicit initialisation is required. Similarly it will also
automatically deinitialise as required.
However, there way be situations when explicit initialisation is desirable or
needed, for example when some non-default initialisation is required. The
function OPENSSL_init_crypto() can be used for this purpose for
libcrypto (see also L<OPENSSL_init_ssl(3)> for the libssl
equivalent).
Numerous internal OpenSSL functions call OPENSSL_init_crypto().
Therefore, in order to perform non-default initialisation,
OPENSSL_init_crypto() MUST be called by application code prior to
any other OpenSSL function calls.
The B<opts> parameter specifies which aspects of libcrypto should be
initialised. Valid options are:
=over 4
=item OPENSSL_INIT_NO_LOAD_CRYPTO_STRINGS
Suppress automatic loading of the libcrypto error strings. This option is
not a default option. Once selected subsequent calls to
OPENSSL_init_crypto() with the option
B<OPENSSL_INIT_LOAD_CRYPTO_STRINGS> will be ignored.
=item OPENSSL_INIT_LOAD_CRYPTO_STRINGS
Automatic loading of the libcrypto error strings. With this option the
library will automatically load the libcrypto error strings.
This option is a default option. Once selected subsequent calls to
OPENSSL_init_crypto() with the option
B<OPENSSL_INIT_NO_LOAD_CRYPTO_STRINGS> will be ignored.
=item OPENSSL_INIT_ADD_ALL_CIPHERS
With this option the library will automatically load and make available all
libcrypto ciphers. This option is a default option. Once selected subsequent
calls to OPENSSL_init_crypto() with the option
B<OPENSSL_INIT_NO_ADD_ALL_CIPHERS> will be ignored.
=item OPENSSL_INIT_ADD_ALL_DIGESTS
With this option the library will automatically load and make available all
libcrypto digests. This option is a default option. Once selected subsequent
calls to OPENSSL_init_crypto() with the option
B<OPENSSL_INIT_NO_ADD_ALL_CIPHERS> will be ignored.
=item OPENSSL_INIT_NO_ADD_ALL_CIPHERS
With this option the library will suppress automatic loading of libcrypto
ciphers. This option is not a default option. Once selected subsequent
calls to OPENSSL_init_crypto() with the option
B<OPENSSL_INIT_ADD_ALL_CIPHERS> will be ignored.
=item OPENSSL_INIT_NO_ADD_ALL_DIGESTS
With this option the library will suppress automatic loading of libcrypto
digests. This option is not a default option. Once selected subsequent
calls to OPENSSL_init_crypto() with the option
B<OPENSSL_INIT_ADD_ALL_DIGESTS> will be ignored.
=item OPENSSL_INIT_LOAD_CONFIG
With this option an OpenSSL configuration file will be automatically loaded and
used by calling OPENSSL_config(). This is not a default option.
See the description of OPENSSL_init_new(), below.
=item OPENSSL_INIT_NO_LOAD_CONFIG
With this option the loading of OpenSSL configuration files will be suppressed.
It is the equivalent of calling OPENSSL_no_config(). This is not a default
option.
=item OPENSSL_INIT_ASYNC
With this option the library with automatically initialise the libcrypto async
sub-library (see L<ASYNC_start_job(3)>). This is a default option.
=item OPENSSL_INIT_ENGINE_RDRAND
With this option the library will automatically load and initialise the
RDRAND engine (if available). This not a default option.
=item OPENSSL_INIT_ENGINE_DYNAMIC
With this option the library will automatically load and initialise the
dynamic engine. This not a default option.
=item OPENSSL_INIT_ENGINE_OPENSSL
With this option the library will automatically load and initialise the
openssl engine. This not a default option.
=item OPENSSL_INIT_ENGINE_CRYPTODEV
With this option the library will automatically load and initialise the
cryptodev engine (if available). This not a default option.
=item OPENSSL_INIT_ENGINE_CAPI
With this option the library will automatically load and initialise the
CAPI engine (if available). This not a default option.
=item OPENSSL_INIT_ENGINE_PADLOCK
With this option the library will automatically load and initialise the
padlock engine (if available). This not a default option.
=item OPENSSL_INIT_ENGINE_DASYNC
With this option the library will automatically load and initialise the
DASYNC engine. This not a default option.
=item OPENSSL_INIT_ENGINE_ALL_BUILTIN
With this option the library will automatically load and initialise all the
built in engines listed above with the exception of the openssl and dasync
engines. This not a default option.
=back
Multiple options may be combined together in a single call to
OPENSSL_init_crypto(). For example:
OPENSSL_init_crypto(OPENSSL_INIT_NO_ADD_ALL_CIPHERS
| OPENSSL_INIT_NO_ADD_ALL_DIGESTS, NULL);
The OPENSSL_cleanup() function deinitialises OpenSSL (both libcrypto
and libssl). All resources allocated by OpenSSL are freed. Typically there
should be no need to call this function directly as it is initiated
automatically on application exit. This is done via the standard C library
L<atexit(3)> function. In the event that the application will close in a manner
that will not call the registered atexit() handlers then the application should
call OPENSSL_cleanup() directly. Developers of libraries using OpenSSL
are discouraged from calling this function and should instead, typically, rely
on auto-deinitialisation. This is to avoid error conditions where both an
application and a library it depends on both use OpenSSL, and the library
deinitialises it before the application has finished using it.
Once OPENSSL_cleanup() has been called the library cannot be reinitialised.
Attempts to call OPENSSL_init_crypto() will fail and an ERR_R_INIT_FAIL error
will be added to the error stack. Note that because initialisation has failed
OpenSSL error strings will not be available, only an error code. This code can
be put through the openssl errstr command line application to produce a human
readable error (see L<errstr(1)>).
The OPENSSL_atexit() function enables the registration of a
function to be called during OPENSSL_cleanup(). Stop handlers are
called after deinitialisation of resources local to a thread, but before other
process wide resources are freed. In the event that multiple stop handlers are
registered, no guarantees are made about the order of execution.
The OPENSSL_thread_stop() function deallocates resources associated
with the current thread. Typically this function will be called automatically by
the library when the thread exits. This should only be called directly if
resources should be freed at an earlier time, or under the circumstances
described in the NOTES section below.
The B<OPENSSL_INIT_LOAD_CONFIG> flag will load a default configuration
file. To specify a different file, an B<OPENSSL_INIT_SETTINGS> must
be created and used. The routines
OPENSSL_init_new() and OPENSSL_INIT_set_config_filename() can be used to
allocate the object and set the configuration filename, and then the
object can be released with OPENSSL_INIT_free() when done.
=head1 NOTES
Resources local to a thread are deallocated automatically when the thread exits
(e.g. in a pthreads environment, when pthread_exit() is called). On Windows
platforms this is done in response to a DLL_THREAD_DETACH message being sent to
the libcrypto32.dll entry point. Some windows functions may cause threads to exit
without sending this message (for example ExitProcess()). If the application
uses such functions, then the application must free up OpenSSL resources
directly via a call to OPENSSL_thread_stop(). Similarly this message will
also not be sent if OpenSSL is linked statically, and therefore applications
using static linking should also call OPENSSL_thread_stop().
=head1 RETURN VALUES
The functions OPENSSL_init_crypto and OPENSSL_atexit() returns 1 on success or
0 on error.
=head1 SEE ALSO
L<OPENSSL_init_ssl(3)>
=head1 HISTORY
The OPENSSL_init_crypto(), OPENSSL_cleanup(), OPENSSL_atexit(),
and OPENSSL_thread_stop() functions were added in OpenSSL 1.1.0.
=cut
=head1 COPYRIGHT
Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the OpenSSL license (the "License"). You may not use
this file except in compliance with the License. You can obtain a copy
in the file LICENSE in the source distribution or at
L<https://www.openssl.org/source/license.html>.
=cut